2wire BT router (Firmware 6.1.1) 1 Server (Dell) Hardware with NICs (Server is connected to router via Ethernet Cable) 5 Static Ip addresses purchased from BT Server OS is Centos 5.2
All laptops (5) are able to connect to the net wirelessly. I just did a standard installation of the Centos following [url]
I then tried Code: yum update but it times out. I have no remote access to the server. I can only connect when i am on the router. I have seached, read and tried so many sites and commands but it just is not working. I have had this problem for about a 6 days.
Its a long story but basically this server setup has become a nemesis.
I don't mind providing remote access to the server and router admin page if needed. I am in London btw.
I had a HDD crash recently on my Root Server. Replaced HDDs, installed Ubuntu 12.04 LTS, since Ubuntu 14.04 LTS is not supported by Plesk yet. Anyway...
I had 2 issues:
1) Could not create Customers, because IP Pool was empty. Changed IP Type from Dedicated to Shared. Fixed issue. 2) Cannot connect to the FTP Server using the Login Data from one of my Domains.
FlashFXP and FileZilla both show the same error, which is:
Code: Response:220 ProFTPD 1.3.4c Server (ProFTPD) [*ip removed*] Command:USER *user removed* Response:331 Password required for *user removed* Command:PASS ************** Response:530 Login incorrect. Error:Critical error Error:Could not connect to server
Now everything starts, I come to the network screen (right after the language selection), leave everything on default, it says it is trying to configure the network with DHCP for eth0 and then hangs there for a moment a does nothing.
How do I continue, how do I configure the network correcly.
I am just starting to learn Xen and would appreciate all the input I get.
I tried to install clamav, but i'm out of luck. It won't install at all. it gives the folloing error:
Transaction Check Error: file /etc/freshclam.conf from install of clamav-0.95.1-4.el5.rf.i386 conflicts with file from package clamav-toaster-0.95.1-1.3.27.i386 ....
i have a 32bit centos running with 8 gigs, but only 7 is registering when i contacted support they told me
Your server does in fact have 8GB of physical memory however the reason it is not being recognized is due to the fact that you are using a 32 bit operating system. By default, the 8GB would be recognized if it were a 64 bit OS however on a 32 bit operating system, you must install and boot into the PAE kernel (physical address extension) for the 8GB to be recognized and utilized. The PAE kernel can be installed through yum when connected to your server as root over SSH. Once you have installed the kernel, you will need to reboot the server for these changes to take effect
i tried
yum pae install
yum pae kernel install
both didnt work can anyone give me a quick step by step guide on how to go about this.
Been fooling around with red5 too long now. I really need this app to work so I can use the audio/video option on my chat.
I'm willing to pay the person who can make red5 work on my linux centos server. I allready installed ant & red5, the java is just a bit to tricky for me.
Like I said, I'm willing to pay a fee for the person who can make the red5 work.
I have a dedicated linux server and i want to install zimbra(open source mail server) on my server,i have googled and install it but it doesn't work..i can't login in to admin panel [url]but it throws page load error.
im going to be installing centos 5.1 on a webserver. which packages should i install. ie when it gives the the options for kde knome server server with gui etc?
I am using apachetop and it says in order to resolve host names (-r flag), adns must be installed. Host names aren't being resolved, so it appears I don't have adns, and I have googled but can't figure out where to get it and how to install it.
error: [url] : import read failed. Your operating system's rpm update method (yum) was not able to locate the glibc package. This is an indication of an improper setup. You must correct this error before you can proceed.
However, after extracting it, when I run the setup (./setupLinux_x64.bin -console) I get "Bundled JRE is not binary compatible with host OS/Arch or it is corrupt. Testing bundled JRE failed."
Can anyone give me the steps for installing 3dm2 on a centos/WHM box?
$ yum --enablerepo=centosplus --exclude=php-domxml install php* Setting up Install Process Setting up repositories Reading repository metadata in from local files Excluding Packages in global exclude list Finished Parsing package install arguments Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Package php-pear-Cache.noarch 0:1.5.5-0.1.RC4.el4.centos set to be updated ---> Package php-odbc.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-pear-Net-Curl.noarch 0:1.2.3-2.el4.centos set to be updated ---> Package php-mhash.x86_64 0:5.1.6-1.el4.centos set to be updated ---> Package php-dbase.x86_64 0:5.1.6-1.el4.centos set to be updated ---> Package php-mysql.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-gd.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-pear-XML-Beautifier.noarch 0:1.1-1.el4.centos set to be updated ---> Package php-mcrypt.x86_64 0:5.1.6-1.el4.centos set to be updated ---> Package php-pear-HTTP.noarch 0:1.4.0-7.el4.centos set to be updated ---> Package php-xml.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-pear-XML-Serializer.noarch 0:0.18.0-2.el4.centos set to be updated ---> Package php-pecl-apc.x86_64 0:3.0.12-1.el4.centos set to be updated ---> Package php-pear-Validate-Finance-CreditCard.noarch 0:0.5.2-1.el4.centos set to be updated ---> Package php-pear-Date.noarch 0:1.4.6-1.el4.centos set to be updated ---> Package php-pear-XML-Parser.noarch 0:1.2.7-4.el4.centos set to be updated ---> Package php-soap.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-pear-Net-Socket.noarch 0:1.0.6-5.el4.centos set to be updated ---> Package php-pear-XML-Util.noarch 0:1.1.1-1.el4.centos set to be updated ---> Package php-pgsql.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-pear-MDB2.noarch 0:2.2.2-2.el4.centos set to be updated ---> Package php-eaccelerator.x86_64 0:5.1.6_0.9.5-1.el4.centos set to be updated ---> Package php-pear-PHP-Compat.noarch 0:1.5.0-1.el4.centos.1 set to be updated ---> Package php-pear-HTTP-Request.noarch 0:1.4.0-1.el4.centos set to be updated ---> Package php-pecl-mailparse.x86_64 0:2.1.1-4.el4.centos set to be updated ---> Package php-pear-XML-RSS.noarch 0:0.9.10-2.el4.centos set to be updated ---> Package php-dba.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-common.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-ncurses.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-pear-HTML-Table.noarch 0:1.7.5-1.el4.centos set to be updated ---> Package php.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-pear-DB.noarch 0:1.7.6-6.el4.centos set to be updated ---> Package php-pear-Mail-Mime.noarch 0:1.3.1-8.el4.centos set to be updated ---> Package php-pear-Auth-SASL.noarch 0:1.0.2-4.el4.centos set to be updated ---> Package php-pear-Mail.noarch 0:1.1.14-1.el4.centos set to be updated ---> Package php-pear-PHPUnit.noarch 0:1.3.2-1.el4.centos.1 set to be updated ---> Package php-pear-Net-URL.noarch 0:1.0.14-1.el4.centos set to be updated ---> Package php-pear-Console-Table.noarch 0:1.0.5-2.el4.centos.1 set to be updated ---> Package php-pear-Net-DIME.noarch 0:0.3-1.el4.centos set to be updated ---> Package php-pear-Pager.noarch 0:2.4.2-1.el4.centos set to be updated ---> Package php-pdo.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-pear-Log.noarch 0:1.9.9-1.el4.centos set to be updated ---> Package php-bcmath.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-pear-Benchmark.noarch 0:1.2.6-1.el4.centos set to be updated ---> Package php-snmp.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-pear-Net-SMTP.noarch 0:1.2.8-5.el4.centos set to be updated ---> Package php-pear.noarch 1:1.4.11-1.el4s1.1 set to be updated ---> Package php-xmlrpc.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-pear-DB-QueryTool.noarch 0:1.0.3-1.el4.centos set to be updated ---> Package php-pear-PHPUnit2.noarch 0:2.3.6-1.el4.centos set to be updated ---> Package php-devel.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-mbstring.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-pear-Payment-Process.noarch 0:0.6.5-1.el4.centos set to be updated ---> Package php-pear-Net-FTP.noarch 0:1.3.2-1.el4.centos set to be updated ---> Package php-pear.x86_64 0:4.3.9-3.22.5 set to be updated ---> Package php-cli.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-readline.x86_64 0:5.1.6-1.el4.centos set to be updated ---> Package php-pear-Console-Getargs.noarch 0:1.3.3-1.el4.centos set to be updated ---> Package php-imap.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-pecl-zip.x86_64 0:1.8.0-1.el4.centos set to be updated ---> Package php-pear-Validate.noarch 0:0.6.4-1.el4.centos set to be updated ---> Package php-pear-Date-Holidays.noarch 0:0.16.1-1.el4.centos set to be updated ---> Package php-pear-HTML-Common.noarch 0:1.2.3-2.el4.centos set to be updated ---> Package php-pear-PHP-CompatInfo.noarch 0:1.4.0-1.el4.centos set to be updated ---> Package php-ldap.x86_64 0:5.1.6-3.el4s1.7 set to be updated ---> Package php-pear-Image-GraphViz.noarch 0:1.2.1-1.el4.centos set to be updated ---> Package php-tidy.x86_64 0:5.1.6-1.el4.centos set to be updated --> Running transaction check --> Processing Conflict: php-pecl-apc conflicts php-eaccelerator --> Processing Dependency: autoconf for package: php-devel --> Processing Dependency: libexslt.so.0()(64bit) for package: php-xml --> Processing Dependency: libmcrypt.so.4()(64bit) for package: php-mcrypt --> Processing Dependency: php-pecl(Xdebug) for package: php-pear-PHPUnit2 --> Processing Dependency: graphviz for package: php-pear-Image-GraphViz --> Processing Dependency: libmhash.so.2()(64bit) for package: php-mhash --> Processing Dependency: net-snmp for package: php-snmp --> Processing Dependency: libpq.so.4()(64bit) for package: php-pgsql --> Processing Dependency: libltdl.so.3()(64bit) for package: php-mcrypt --> Processing Dependency: libmysqlclient.so.15()(64bit) for package: php-mysql --> Processing Dependency: php = 4.3.9-3.22.5 for package: php-pear --> Processing Dependency: libmysqlclient.so.15(libmysqlclient_15)(64bit) for package: php-mysql --> Processing Dependency: automake for package: php-devel --> Processing Dependency: libnetsnmp.so.5()(64bit) for package: php-snmp --> Processing Dependency: libtidy-0.99.so.0()(64bit) for package: php-tidy --> Processing Dependency: libxslt.so.1()(64bit) for package: php-xml --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package libtidy.x86_64 0:0.99.0-9.20051025.el4.centos.3 set to be updated ---> Package postgresql-libs.x86_64 0:8.1.9-1.el4s1.1 set to be updated ---> Package net-snmp-libs.x86_64 0:5.1.2-11.EL4.10 set to be updated ---> Package libxslt.x86_64 0:1.1.11-1 set to be updated ---> Package libtool-libs.x86_64 0:1.5.6-4.EL4.1.c4.4 set to be updated ---> Package autoconf.noarch 0:2.59-5 set to be updated ---> Package automake.noarch 0:1.9.2-3 set to be updated ---> Package mysql.x86_64 0:5.0.27-1.el4.centos set to be updated ---> Package net-snmp.x86_64 0:5.1.2-11.EL4.10 set to be updated ---> Package libmcrypt.x86_64 0:2.5.7-4.el4.centos set to be updated ---> Package mhash.x86_64 0:0.9.2-4 set to be updated --> Running transaction check --> Processing Conflict: php-pecl-apc conflicts php-eaccelerator --> Processing Dependency: libgpg-error.so.0()(64bit) for package: libxslt --> Processing Dependency: php-pecl(Xdebug) for package: php-pear-PHPUnit2 --> Processing Dependency: libgcrypt.so.11()(64bit) for package: libxslt --> Processing Dependency: graphviz for package: php-pear-Image-GraphViz --> Processing Dependency: libmysqlclient.so.14(libmysqlclient_14)(64bit) for package: mysql-server --> Processing Dependency: mysql = 4.1.20-2.RHEL4.1 for package: mysql-server --> Processing Dependency: libpq.so.3()(64bit) for package: dovecot --> Processing Dependency: libmysqlclient.so.14()(64bit) for package: mysql-server --> Processing Dependency: libmysqlclient_r.so.14()(64bit) for package: mysql-server --> Processing Dependency: php = 4.3.9-3.22.5 for package: php-pear --> Processing Dependency: mysql = 4.1.20-2.RHEL4.1 for package: mysql-devel --> Processing Dependency: libmysqlclient.so.14()(64bit) for package: perl-DBD-MySQL --> Processing Dependency: libmysqlclient_r.so.14(libmysqlclient_14)(64bit) for package: mysql-server --> Processing Dependency: libmysqlclient.so.14(libmysqlclient_14)(64bit) for package: dovecot --> Processing Dependency: libmysqlclient.so.14()(64bit) for package: dovecot --> Processing Dependency: m4 for package: autoconf --> Processing Dependency: libsensors.so.3()(64bit) for package: net-snmp --> Processing Dependency: libgcrypt.so.11(GCRYPT_1.2)(64bit) for package: libxslt --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package mysqlclient14.x86_64 0:4.1.22-1.el4s1.1 set to be updated ---> Package postgresqlclient7.x86_64 0:7.4.14-1.el4s1.1.el4.centos set to be updated ---> Package mysql-server.x86_64 0:5.0.27-1.el4.centos set to be updated ---> Package m4.x86_64 0:1.4.1-16 set to be updated ---> Package lm_sensors.x86_64 0:2.8.7-2.40.3 set to be updated ---> Package libgcrypt.x86_64 0:1.2.0-3 set to be updated ---> Package mysql-devel.x86_64 0:5.0.27-1.el4.centos set to be updated ---> Package perl-DBD-MySQL.x86_64 0:3.0008-1.el4.centos set to be updated ---> Package libgpg-error.x86_64 0:1.0-1 set to be updated --> Running transaction check --> Processing Conflict: php-pecl-apc conflicts php-eaccelerator --> Processing Dependency: php-pecl(Xdebug) for package: php-pear-PHPUnit2 --> Processing Dependency: graphviz for package: php-pear-Image-GraphViz --> Processing Dependency: perl(:MODULE_COMPAT_5.8.8) for package: perl-DBD-MySQL --> Processing Dependency: php = 4.3.9-3.22.5 for package: php-pear --> Processing Dependency: kernel-utils for package: lm_sensors --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package kernel-utils.x86_64 1:2.4-13.1.99 set to be updated ---> Package perl.x86_64 4:5.8.8-4.el4s1 set to be updated --> Running transaction check --> Processing Conflict: php-pecl-apc conflicts php-eaccelerator --> Processing Dependency: graphviz for package: php-pear-Image-GraphViz --> Processing Dependency: php = 4.3.9-3.22.5 for package: php-pear --> Processing Dependency: php-pecl(Xdebug) for package: php-pear-PHPUnit2 --> Finished Dependency Resolution Error: php-pecl-apc conflicts with php-eaccelerator Error: Missing Dependency: php-pecl(Xdebug) is needed by package php-pear-PHPUnit2 Error: Missing Dependency: graphviz is needed by package php-pear-Image-GraphViz Error: Missing Dependency: php = 4.3.9-3.22.5 is needed by package php-pear
I've bought an VPS recently but now I have a problem. It didn't come with yum installed so I need to install it on my own...
Now, I have a problem.
When I try to do:
Code: # rpm -Uvh yum-3.2.19-18.el5.centos.noarch.rpm This comes out:
Code: warning: yum-3.2.19-18.el5.centos.noarch.rpm: Header V3 DSA signature: N OKEY, key ID e8562897 error: Failed dependencies: yum-fastestmirror is needed by yum-3.2.19-18.el5.centos.noarch
So I suppose I need to install the yum-fastestmirror first. But when I try:
Code: # rpm -Uvh yum-fastestmirror-1.1.16-13.el5.centos.noarch. rpm This comes out:
Code:
warning: yum-fastestmirror-1.1.16-13.el5.centos.noarch.rpm: Header V3 DS A signature: NOKEY, key ID e8562897 error: Failed dependencies: yum >= 3.0 is needed by yum-fastestmirror-1.1.16-13.el5.centos.n
manually install Windows 2003 std to a linux box ( CentOS 5.2 to be exact). The reason is my provider does not provide Windows or custom OS installation.