Plesk 11.x / Linux :: Installing SSL For Mail Service?
Dec 12, 2014Installing my SSL for mail service, my SSL is already install for website...
View 1 Replies
ADVERTISEMENT
Plesk 12.x / Linux :: Mail Service Won't Start
Mar 7, 2015I switched off the mail service for one of my domains in that sites control panel a few days ago because there were some malicious files on my server sending out spam. I stopped the service until I cleared all the files that weren't meant to be there and then tried to restart the mail service again but it won't start.
I get this message 'Information: Mail service settings were successfully changed for the selected domains.' but the service stays off. I had the same problem on another site on the same server and carried out the same process but the mail service for that website started fine.
I installed Cloudflare for Plesk during this time and thought that might be causing an issue but after disabling this I still can't start the mail service for the domain.
Is there a section of the main (super admin) control panel that manages the mail services for each domain I am unaware of?
Plesk 12.0.18 on Debian
Plesk 12.x / Linux :: Courier Mail Service Do Not Respond
Feb 2, 2015I'm using plesk with CentOS 6.6
After setting up some e-mail accounts over the plesk gui I tried to connect via a mail software (like thunderbird).
This failed with every combination of settings I tried. So I checked if the POP3/IMAP services are running correctly using telnet.
I connected using the following command:
Code:
telnet <host-ip> 110
The response was:
Code:
Trying <host-IP>...
Connected to <host-IP>.
Escape character is '^]'.
-ERR Cannot connect to POP server <host-IP> (<host-IP>:110), NB connect error 1460
Connection closed by foreign host.
Did I miss to enable a setting?
The Plesk gui schows me, that the corresponding services are running...
Plesk 11.x / Linux :: Email To External Mail Service Delivered Locally
Oct 7, 2014Plesk delivering email locally to a not existing mailbox instead of sending it to an external party. First I was using a local mailbox, but my client wanted to control the email using their own server. So I've changed the MX records to this new server. Deleted the inbox in Plesk and turned off Mail support for this domain.
New situation: DNS server for domain.com is hosted on a different location and points to my Plesk server for the website and the MX records point to the clients server for the mail.
Email send from email addresses like gmail are send correctly to the clients server. Email addresses from my PLesk server and forms from the website are send locally.
Plesk 11.x / Linux :: Accessing Mail Settings On Domain - Unable To Find Service Node For IP Address
Jun 30, 2014When trying to access the settings for mail on a domain I get the following error:
Error: Unable to find service node for ip address with id=6
I understand this is a problem with the database but I am not sure where to look to fix it.
I only have 4 IP addresses on the system.
Plesk 12.x / Linux :: Centos 7 - Service Configuration (Bind Service Is Not Installed)
Apr 27, 2015I have a Server with Centos7 + Plesk 12 and in the service configuration say that the Bind service is not installed, from command line i have install named services and make a manual configuration the first domain, but when I return to the service page in plesk... the problem is the same, the Bind Service is not installed; then the problem is when i want create a new hosting i need to go to the ssh to make the DNS configuration...
View 1 Replies View RelatedPlesk 12.x / Linux :: Unable To Find Service Node For Web Service On Domain With ID 0
Sep 10, 2014Got following Problem: Unable to find service node for web service on domain with id = 0
After a Check from [URL] ....
I tried this: [URL] ....
Result:
+--------------------+--------------+---------------------------------------+------------------------------+------------+
| Domains | Service Type | IpAddressesCollections.ipCollectionId | Current value of ipAddressId | Have to be |
+--------------------+--------------+---------------------------------------+------------------------------+------------+
| XXXXXXXXXXXXX.org | mail | 30 | 0 | 1 |
+--------------------+--------------+---------------------------------------+------------------------------+------------+
Resolution:
mysql -uadmin -p`cat /etc/psa/.psa.shadow` -Dpsa -e 'Update IpAddressesCollections SET ipAddressId = 1 WHERE ipCollectionId = 30'
Result: ERROR 1062 (23000) at line 1: Duplicate entry '30-0' for key 'PRIMARY'
Plesk 12.x / Linux :: Unable To Find Service Node For Web Service On Domain With ID 6
Jun 24, 2015Deleted a domain workspace in Parallels Plesk and now I am getting this error when signing into the panel:Looked at the logs and been trying multiple commands (including the bootstrapper repair etc.)I found the full error from the logs:
[13-Jun-2015 16:35:33 UTC] PleskDBException: Unable to find service node for web service on domain with id=6
file: /usr/local/psa/admin/plib/PhDomain.php
line: 1404
code: 0
trace: #0 /usr/local/psa/admin/plib/Smb/Subscription/Domain.php(490): PhDomain->getWebHostingServiceNode()
[code]....
Plesk 12.x / Linux :: Internal Error - Unable To Find Service Node For Web Service On Domain With ID 5
Jun 15, 2014Clean install on openSUSE 13.1
After deleting a domain, we got the following error which rendered the panel useless.
Internal error: Unable to find service node for web service on domain with id=5
Message Unable to find service node for web service on domain with id=5
File PhDomain.php
Line 1402
Type PleskDBException
Go To Previous Page
Plesk 12.x / Linux :: Installing Mcrypt On Linux Centos 5.5 PHP 5.3.3
Jun 20, 2014I am trying to install Magento on my apache server. I am running into the dreaded mcrypt issue as Magento needs it to run. I have now been googling for the past few hours and have gotten nowhere.
Here are my details:
Linux
Centos 5.5
PHP 5.3.3
x86_64
Plesk 12
I have tried installing all sorts of different repos and it just isn't working.
When I try to install using # yum install php-mcrypt I get the following:
Loaded plugins: fastestmirror
Package php-mysql is obsoleted by php-mysqlnd, trying to install php-mysqlnd-5.5.13-3.el5.remi.x86_64 instead
--> Processing Dependency: php53-gd for package: psa-php53-configurator
--> Processing Dependency: php53-imap for package: psa-php53-configurator
[Code].....
Plesk 11.x / Linux :: Installing Git In Chroot?
Sep 30, 2014I have customers that want the git program to be able to pull/push their github repos. I've copied all of the files in the git rpm into the site's chroot but whenever they try to pull down their repo via ssl they get this message:
error: while accessing https://github.com/USERNAME/PROJECT.git/info/refs
fatal: HTTP request failed
We have gotten ssh to work with git but the ssl issue still isn't working.
Plesk 12.x / Linux :: Installing Magento (Centos 7)
Oct 11, 2014I am trying to install a magento on Plesk Version 12.0.18 Update #19 / CentOS Linux 7.0.1406 (Core).
Plesk is reporting that it cant install magento because php-mcrypt is missing. So I tried the following:
Code:
1) rpm -ivh [URL] ....
2) yum update
3) yum install php-mcrypt
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: ftp.plusline.de
* epel: mirror.23media.de
* extras: ftp.plusline.de
* updates: mirror.netcologne.de
[Code] ......
What can i do to install mcrypt without breaking other dependencies ?
Plesk 12.x / Linux :: Installing Web Host With CloudLinux?
Sep 10, 2014How do I go about installing Web Host with CloudLinux? I can't find the tutorial. I have the Web Host + CloudLinux VPS license.
View 3 Replies View RelatedPlesk 12.x / Linux :: Error Installing WordPress Via Applications
Jul 25, 2014I just tried to install wordpress on Ubuntu 12.04.4 LTS Plesk 12.0.18 #9 via
Plesk -> Domains -> domain.tld -> Applications -> WordPress -> InstallClick to expand...
Plesk 12.x / Linux :: Installing Joomla - Wrong Version Of PHP / Can't Allow SSH
Aug 18, 2014I'm new to Plesk - I've inherited a web site for a local social club so have just been handed login and password. I believe I have version 11.0.9 and as I can see mention of an Apache webserver I'm guessing its linux.
So - I want to redesign and use Joomla so I can share the content updating with others.
I can't install Joomla as I have PHP 5.1 and need 5.3. I have no 'server' or any sort of option I can find (and I've looked everywhere!) to find a command line or somewhere I can run things.
When I try to allow SSH access the option says Forbidden and there is no option to change it.
Plesk 12.x / Linux :: Installing SPDY Module For Nginx?
Sep 17, 2014How do I go about installing the spdy module for nginx? I understand it's now part of nginx 1.6 which comes with Plesk 12 but when I add the directive
Code:
listen 443 ssl spdy;
I get an error saying "nginx: [emerg] the "spdy" parameter requires ngxhttpspdy_module".
Plesk 12.x / Linux :: Request For Instruction On Correctly Installing APC
Oct 6, 2014I would like to install APCu (Alternative PHP Cache) & ZendOptimizer on plesk v12, I just wanted to know if there is any instructions for installing it correctly in a manner that will not cause issues with plesk updates.
View 5 Replies View RelatedPlesk 11.x / Linux :: Installing Multiple PHP Versions Fails Due To Dependencies
May 27, 2014According to: URL....I tried to install php 5.3...Before able to .configure php source, i must install several dependencies. I resolved most of them but installing libmcrypt-devel gives the following error:
---> Package libmcrypt-devel.x86_64 0:2.5.7-5.el6.art will be installed
--> Processing Dependency: libmcrypt = 2.5.7-5.el6.art for package: libmcrypt-devel-2.5.7-5.el6.art.x86_64
--> Finished Dependency Resolution
Error: Package: libmcrypt-devel-2.5.7-5.el6.art.x86_64 (atomic)
Requires: libmcrypt = 2.5.7-5.el6.art
Installed: libmcrypt-2.5.8-9.el6.x86_64 (@PSA_10_4_4-thirdparty)
libmcrypt = 2.5.8-9.el6
Available: libmcrypt-2.5.7-5.el6.art.x86_64 (atomic)
libmcrypt = 2.5.7-5.el6.art
You could try using --skip-broken to work around the problem...You could try running: rpm -Va --nofiles --nodiges.
Plesk 12.x / Linux :: Sieve Does Not Work After Upgrade To 12.0.18 And Installing Dovecot
Dec 1, 2014i use Plesk on a vserver which was offering it in version 11.x, i upgraded to 12.0.18, then i installed Dovecote on the panel. Everything went fine. Mail server is working.BUT sieve does not allow me to login and create filters.I tried telnet against 4190, and it works:
Connected to mail.xxxxxxxx.xxx.
Escape character is '^]'.
"IMPLEMENTATION" "Dovecot Pigeonhole"
"SIEVE" "fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave imapflags notify"
"NOTIFY" "mailto"
"SASL" "PLAIN LOGIN DIGEST-MD5 CRAM-MD5"
"STARTTLS"
"VERSION" "1.0"
OK "Dovecot ready."
But when i use my sieve plugin for thunderbird OR access plesk's webmailclient Roundcube opening the filter module, it doesnt work. On Thunderbird i see the loading animation, thats it. On Roundcube it says "Unable to connect to sieve server".
Looks like something is missing. I can definitely access 4190 on my server from anywhere. So no firewall issue. I didnt change anything on configs, since plesk is handling it.Roundcube log doesnt give me anything. I dont even see logs added (to syslog or mail.*) while i try to connect.
Plesk 12.x / Linux :: Locked Out From Panel After Installing Additional PHP-versions
Jun 25, 2015For some application-testing I installed PHP 5.5 and PHP 5.6 alongside the existing PHP 5.3 installation. To do that I used the web-interface of the Plesk-installer.
Installing the software went well, or at least didn't show any errors.
After installing I went back to the login-page to get back into the portal, but that didn't work.
I am using the right username and password and don't see any errors, I just keep getting the login-screen and no errors. Logging in through SSH is working as it should. Only access to Plesk on 8443 seems to be denied.
Server reboot didn't work, restarting Plesk-services didn't work...
How can I restore this so I can get back to work?
This Plesk-installation is on a CentOS 6 server on which I have full rights.
Plesk 11.x / Linux :: Installing Fail2bain And Configurator (nginx 1.5 Not Found)
Nov 30, 2014I have Plesk Panel 11.5.30 # 48 installed on my rented vServer, which is virtualized with Parallels Virtual Automation / Plesk Power Panel. I cannot upgrade to Plesk Panel 12.x because my contract just includes a license for 11.x.
Installing fail2ban 0.8.6-3wheezy3 trough Power Panel works, but installing its configurator "plesk-fail2ban-configurator 12.0.18-debian7.0.build1200140526.11" fails.
Operation with the Container "*.*.de" is finished with errors: Can not install packages: ' vzpkg install -q -p * plesk-fail2ban-configurator' exec failed - W: Failed to fetch http://autoinstall.plesk.com/debian/NGINX1.5/dists/wheezy/all/binary-amd64/Packages 404 Not Found
W: Failed to fetch http://autoinstall.plesk.com/debian/NGINX1.5/dists/wheezy/all/binary-i386/Packages 404 Not Found
E: Some index files failed to download. They have been ignored, or old ones used instead.
Error: /usr/bin/apt-get failed, exitcode=100
Error: Can not update metadata for pp11.5-nginx. Skipped.
E: Unable to locate package plesk-fail2ban-configurator
Error: /usr/bin/apt-get failed, exitcode=100
.
Click to expand...
Plesk 11.x / Linux :: Https Redirect To Http After Installing SSL Certificate
May 15, 2014After installing a RapidSSL certificate in a subdomain, https redirects automatically to http,
Plesk 11.5 with debian and last version openssl
Why https redirect to http when I setup the certificate?
Plesk 12.x / Linux :: Backup Stopped Working After Installing AfterLogic WebMail Pro 7
Jun 13, 2014I am getting this error after installing the AfterLogic WebMail Pro_7 app on a domain.
I removed the app but AfterLogic still appears in the list of available Webmail options. I am getting the error even after changing all my domains to use Roundcube.
backup_info_1406131330.xml:
Line 423 error: Element 'external-webmail': This element is not expected.
My backups since the day I installed that app are no longer valid.
Installing Own Uptime Monitoring Service
Mar 30, 2009any free scripts that allow you to monitor uptime status of your servers, local/remote?
most simplistically, just have one server that pings / http requests from other servers to see if they're online, and generates stats.
more ideally, be able to set up multiple checking nodes (like what host-tracker does) so it can check uptime of multipel servers from multiple locations and build reports.
Plesk 12.x / Windows :: Remove Symbols From Mail Service
Jul 8, 2015How can I remove " " from properties domain aliases?
---------------
Mail service - Mail service is switched on for the domain. mx1.domain.ru., mx2.domain.ru. is used as the mail server.
---------------
Plesk 12.x / Windows :: Mail Service Switched Off And Won't Switch On
Oct 30, 2014I go to Mail>Mail seetings, select all my OFF domains and click Acticate/Deactivate Services, select Enable from the drop down and click OK, but the mail service stays OFF.
Plesk 12.0.18, Windows Server 2008 R2 SP1.
Plesk 11.x / Windows :: Service Plan With NO Mail Server
May 11, 2013I have it installed with SmarterMail.
However I have a need to recreate a Service Plan that does not add the domain to SmarterMail.
Like on the Hosting Parameters tab there is an Enable hosting tick box, I need the same type of tick box on the Mail tab.
Plesk 12.x / Windows :: After Upgrade Unable To Dump IP Addresses For Mail Service
Jul 23, 2014After upgrading from 11.5.30 to 12.0.18, when make backup see next message:
<?xml version="1.0" encoding="utf-8"?>
<execution-result status="error">
<object name="example.com" type="domain">
<message severity="error" id="167b9714-3e33-4863-861d-69c4f559afe6" code="InformationalException">
<description>Unable to dump IP addresses for mail service</description>
[Code] ....
Plesk 12.x / Linux :: Failed To Reload PHP-FPM Service
Jan 10, 2015I got this error, when i press on process PHP-files by means of nginx. Nex i receive this in plesk panel:
phpinimng failed: Job for php-fpm.service failed. See 'systemctl status php-fpm.service' and 'journalctl -xn' for details.
Failed to reload php-fpm service
Plesk 12.x / Linux :: Error Using Wordpress Service
Sep 21, 2014if I try to use the new wordpress service in the admin panel, I get following errors:
By starting a search of wordpress installations: PHP Fatal error: "Die Suche nach WordPress-Installationen wurde mit Fehlern abgeschlossen: Resource with UID 'c94fef81-1552-43e1-ae5b-ce125776caa7' not found."
One installation is found but by open the detail view I get the error "Call to undefined function is_admin() in /usr/share/plesk-wp-cli/php/wp-cli.php(18) : eval()'d code on line 87".
Plesk 12.x / Linux :: Sw-cp-server Service Failed
Nov 25, 2014I dont know where is the problem.
/etc/init.d/sw-cp-server restart
Restarting sw-cp-server (via systemctl): Job for sw-cp-server.service failed. See 'systemctl status sw-cp-server.service' and 'journalctl -xn' for details.
[FAILED]
tail -f /var/log/sw-cp-server/error_log
2014/11/26 03:06:10 [emerg] 520#0: invalid number of arguments in "fastcgi_buffers" directive in /etc/sw-cp-server/config:31
2014/11/26 03:06:11 [emerg] 874#0: invalid number of arguments in "fastcgi_buffers" directive in /etc/sw-cp-server/config:31
[Code].....