I switched off the mail service for one of my domains in that sites control panel a few days ago because there were some malicious files on my server sending out spam. I stopped the service until I cleared all the files that weren't meant to be there and then tried to restart the mail service again but it won't start.
I get this message 'Information: Mail service settings were successfully changed for the selected domains.' but the service stays off. I had the same problem on another site on the same server and carried out the same process but the mail service for that website started fine.
I installed Cloudflare for Plesk during this time and thought that might be causing an issue but after disabling this I still can't start the mail service for the domain.
Is there a section of the main (super admin) control panel that manages the mail services for each domain I am unaware of?
I upgraded today from 11 to 12, however since the upgrade I am now unable to start the PSA Service, it comes up with the below error.
Starting psa... Starting sw-engine-fpm: Thu Jun 19 13:22:29 2014 (7885): Fatal Error Unable to allocate shared memory segment of 104857600 bytes: mmap: Cannot allocate memory (12)
I have checked resources and everything should be fine, I cant see a reason why it cant allocate the memory, as there is plenty free for it to take from.
I have tried a Bootstrapper repair for 12 however this has not found any issues other than its not able to stop the PSA Service (As its not running)
Everything else is up and running its just the Parallels backend which im guessing is what the PSA Service is!
First, the datacenter lost power so the server shut off. I assume there is some DB corruption and why the SQL Service won't start.
Code: failed Trying to start service mariadb... Job for mariadb.service failed. See 'systemctl status mariadb.service' and 'journalctl -xn' for details.
WARNING! Some problems are found during start(see log file: /var/log/plesk/psa_service.log)
Continue...
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111) ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111) ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111) ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111) ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111) ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111) Unable to connect to Plesk Database: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111)
I ran the systemctl status mariadb.service command and this is below.
Fehler: f2bmng failed: Job for fail2ban.service failed. See 'systemctl status fail2ban.service' and 'journalctl -xn' for details. ERROR:f2bmng:Failed to start fail2ban service
-- Unit fail2ban.service has failed. -- -- The result is failed.
Aug 20 14:22:13 noreply.flusiserver.de systemd[1]: Unit fail2ban.service entered failed state. Aug 20 14:22:14 noreply.flusiserver.de agetty[14140]: /dev/hvc0: No such file or directoryClick to expand...
After setting up some e-mail accounts over the plesk gui I tried to connect via a mail software (like thunderbird).
This failed with every combination of settings I tried. So I checked if the POP3/IMAP services are running correctly using telnet.
I connected using the following command:
Code: telnet <host-ip> 110
The response was:
Code: Trying <host-IP>... Connected to <host-IP>. Escape character is '^]'. -ERR Cannot connect to POP server <host-IP> (<host-IP>:110), NB connect error 1460 Connection closed by foreign host.
Did I miss to enable a setting?
The Plesk gui schows me, that the corresponding services are running...
Plesk delivering email locally to a not existing mailbox instead of sending it to an external party. First I was using a local mailbox, but my client wanted to control the email using their own server. So I've changed the MX records to this new server. Deleted the inbox in Plesk and turned off Mail support for this domain.
New situation: DNS server for domain.com is hosted on a different location and points to my Plesk server for the website and the MX records point to the clients server for the mail.
Email send from email addresses like gmail are send correctly to the clients server. Email addresses from my PLesk server and forms from the website are send locally.
I have a Server with Centos7 + Plesk 12 and in the service configuration say that the Bind service is not installed, from command line i have install named services and make a manual configuration the first domain, but when I return to the service page in plesk... the problem is the same, the Bind Service is not installed; then the problem is when i want create a new hosting i need to go to the ssh to make the DNS configuration...
Got following Problem: Unable to find service node for web service on domain with id = 0
After a Check from [URL] ....
I tried this: [URL] ....
Result:
+--------------------+--------------+---------------------------------------+------------------------------+------------+ | Domains | Service Type | IpAddressesCollections.ipCollectionId | Current value of ipAddressId | Have to be | +--------------------+--------------+---------------------------------------+------------------------------+------------+ | XXXXXXXXXXXXX.org | mail | 30 | 0 | 1 | +--------------------+--------------+---------------------------------------+------------------------------+------------+
Resolution:
mysql -uadmin -p`cat /etc/psa/.psa.shadow` -Dpsa -e 'Update IpAddressesCollections SET ipAddressId = 1 WHERE ipCollectionId = 30'
Result: ERROR 1062 (23000) at line 1: Duplicate entry '30-0' for key 'PRIMARY'
Deleted a domain workspace in Parallels Plesk and now I am getting this error when signing into the panel:Looked at the logs and been trying multiple commands (including the bootstrapper repair etc.)I found the full error from the logs:
[13-Jun-2015 16:35:33 UTC] PleskDBException: Unable to find service node for web service on domain with id=6 file: /usr/local/psa/admin/plib/PhDomain.php line: 1404 code: 0 trace: #0 /usr/local/psa/admin/plib/Smb/Subscription/Domain.php(490): PhDomain->getWebHostingServiceNode()
After deleting a domain, we got the following error which rendered the panel useless.
Internal error: Unable to find service node for web service on domain with id=5 Message Unable to find service node for web service on domain with id=5 File PhDomain.php Line 1402 Type PleskDBException Go To Previous Page
I run a server with Plesk 11.0.9 and want to add Tomcat support. I installed the "Tomcat Java Servlets support", but can't start the service in the "Services management" tool. It does not show any button. How do I do the next step to run tomcat in plesk?
I noticed that my spamassassin wasn't running on my server. so I restarted the service from the plesk panel but got the following message:
Error: Unable to make action: Unable to manage service by spammng: spamassassin: unrecognized service ERROR:spammng:Unable to start SpamAssassin service ('--start', 'spamassassin')
So I SSH'ed into my machine and saw that spamassassin wasn't running.
The I reinstalled spamassassin from the "add and remove product components", but that didn't change anything. Still the same error.
It seems the servers dns will not resolve and has crashed. When starting the "Named" service, here is the error:
Error in named configuration: zone 0.0.127.IN-ADDR.ARPA/IN: loaded serial 20010622 zone 215.170.107.in-addr.arpa/IN: loaded serial 1433121512 zone lanewgirl.com/IN: NS 'ns.mydomain.com' has no address records (A or AAAA)
zone mydomain.com/IN: not loaded due to errors.
_default/mydomain.com/IN: bad zone
zone mydomain2.com/IN: NS 'ns.mydomain2.com' has no address records (A or AAAA)
So Everything was going great! Until I needed to reboot, and then after that only Plesk panel worked not my IP or any domains setup with it.
BUT when I restart Nginx it all starts working again! (Had to /usr/local/psa/admin/bin/httpdmng --reconfigure-all to get the domains to go to the right directory though)
But now everytime I reboot the server Nginx has to be restarted
I just upgraded from Plesk 11.x to 12.0.18 and was eager to try the new sieve functions. I used the normal Plesk Updates/Upgrades tool to change the imap server from Courier to Dovecot. However, Dovecot will not start. It gives an error about /etc/dovecot/private/ssl-cert-and-key.pem missing.
Plesk Control panel -> Tools and Settings -> Updates and Upgrade
Get:
Error: Unable to start Parallels Products Installer. The following error has occurred: Execution failed. Command: autoinstaller Arguments: Array ( [0] => --service-mode [1] => --enable-xml-output [2] => --ssl-cert [3] => /usr/local/psa/admin/conf/httpsd.pem [4] => --branch [5] => release,stable ) Details: file does not exist or is not executable: /usr/local/psa/admin/bin/autoinstallerClick to expand...
I just setup an instance of Apache on Windows with SSL and it starts by running "httpd.exe", but I can't get it to start as a service. It was running fine before adding the SSL certificate/key pair.
This is the error, I get as a Service:
Quote:
[Wed Aug 15 11:22:09 2007] [info] mod_unique_id: using ip addr 10.254.1.135 [Wed Aug 15 11:22:10 2007] [info] Init: Seeding PRNG with 144 bytes of entropy [Wed Aug 15 11:22:10 2007] [info] Loading certificate & private key of SSL-aware server [Wed Aug 15 11:22:10 2007] [error] (OS 5)Access is denied. : Init: Can't open server certificate file C:/Apache2/conf/ssl/NBCDDSARP10.dev.npe.tic.cert
This is what happens when I run it via "httpd.exe"
Quote:
[Wed Aug 15 11:27:08 2007] [info] Init: Seeding PRNG with 144 bytes of entropy [Wed Aug 15 11:27:08 2007] [info] Loading certificate & private key of SSL-aware server [Wed Aug 15 11:27:08 2007] [info] Init: Generating temporary RSA private keys (512/1024 bits) [Wed Aug 15 11:27:08 2007] [info] Init: Generating temporary DH parameters (512/1024 bits) [Wed Aug 15 11:27:08 2007] [info] Init: Initializing (virtual) servers for SSL [Wed Aug 15 11:27:08 2007] [info] Configuring server for SSL protocol [Wed Aug 15 11:27:08 2007] [info] Server: Apache/2.2.4, Interface: mod_ssl/2.2.4, Library: OpenSSL/0.9.8e
For some reason my nginx doenst start and I get the following error:
Error: Unable to start service: Unable to manage service by nginxmng: [2015-05-30 01:03:20] ERR [util_exec] proc_close() failed enabling nginx proxy failed: getsebool: SELinux is disabled
255 Service /etc/init.d/nginx failed to start getsebool: SELinux is disabled
on a fresh installation of Ubuntu (at first 14.04 but on 12.04 the same problem occurs) I installed Plesk via the autoinstaller. It seems to be all fine except I cannot open Plesk in the browser.
The web browser shows "502 Bad Gateway", a look into the error_log at "/var/log/plesk/sw-cp-server" shows the following error:
Code: 2014/08/11 09:37:22 [crit] 4988#0: *4 connect() to unix:/var/run/sw-engine.sock failed (2: No such file or directory) while connecting to upstream, client: xxx.xxx.xxx.xxx, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "xxx.xxx.xxx.xxx:8443" So the problem seems to be the sw-engine service that cannot be started. If I try to start it manually with `/etc/init.d/sw-engine start` it just fails:
Code: * Starting Plesk engine pool manager sw-engine-fpm [fail]
Where to find any startup error log for sw-engine, where I could find any further information.
when i start named.conf i got error with all my site like that
zone localhost/IN: loaded serial 42 zone 0.0.127.in-addr.arpa/IN: loaded serial 1997022700 zone 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN: loaded serial /var/named/example.com.db:14: NS record '192.168.1.1' appears to be an address /var/named/example.com.db:15: NS record '192.168.1.1' appears to be an address zone host.example.com/IN: loading master file /var/named/host.example.com.db: file not found _default/host.example.com/IN: file not found zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 zone example.com/IN: loaded serial 2007052100 zone example2.com/IN: loaded serial 2007042801 zone example3.com/IN: loaded serial 2007042801 [FAILED]
I have been using Apache 2.2.23 VC9 ssl 0.98 on my windows 7 32 bit PC. I decided to remove the 2.2.23 release and install 2.4.3 VC9 version yesterday. After installation, I was able to run Apache by running httpd.exe from command line. I can also install Apache service using "httpd -k install" with no problem. However, when I tried to start Apache service using "httpd -k start", it didn't work for me. Starting Apache from apachemonitor also failed. I checked error.log and found the following output:
Starting the Apache2.4 service [Mon Feb 18 19:00:33.498207 2013] [mpm_winnt:crit] [pid 7564:tid 376] (OS 1053)The service did not respond to the start or control request in a timely fashion. : AH00378: Apache2.4: Failed to start the service process.
I encountered a strange problem when installing apache 2.2 or 2.4 as a service and set the service to be automaticly started.On restart of windows, apache service crashes with an access violation.
Installed Apache Server 2.4.3 (no PHP, etc.) and it was working beautifully for a week or so. Yesterday, I restarted my laptop (nothing changed... no updates that install automatically, etc.) and now Apache won't start. Here are some things I've found out on my quest on figuring out what's wrong:
1. Apache Error Log: [Sat Jan 05 14:18:36.745977 2013] [mpm_winnt:notice] [pid 4116:tid 372] AH00455: Apache/2.4.3 (Win64) configured -- resuming normal operations [Sat Jan 05 14:18:36.745977 2013] [mpm_winnt:notice] [pid 4116:tid 372] AH00456: Server built: Aug 18 2012 14:13:48 [Sat Jan 05 14:18:36.745977 2013] [core:notice] [pid 4116:tid 372] AH00094: Command line: 'C:Apache24inhttpd.exe -d C:/Apache24' [Sat Jan 05 14:18:36.747979 2013] [mpm_winnt:notice] [pid 4116:tid 372] AH00418: Parent: Created child process 3436 [Sat Jan 05 14:18:37.335418 2013] [mpm_winnt:crit] [pid 4116:tid 372] AH00419: master_main: create child process failed. Exiting.
2. Nothing else is using port 80 (or 443, for that matter).
3. Apache will start and stay running if I run httpd.exe from the DOS prompt or double-click it from within Windows just fine.
4. Will not run when launched from within the Services or Apache Service Monitor app.
5. Windows Event Error displays the following error: Faulting application name: httpd.exe, version: 2.4.3.0, time stamp: 0x502f863e Faulting module name: MSVCR100.dll, version: 10.0.40219.325, time stamp: 0x4df2bcac Exception code: 0xc0000417 Fault offset: 0x0000000000070468 Faulting process id: 0x13d8 Faulting application start time: 0x01cdeb8eefaec475 Faulting application path: C:Apache24inhttpd.exe Faulting module path: C:WindowsSYSTEM32MSVCR100.dll Report Id: 2deab70b-5782-11e2-be94-00247e17b5d9 Faulting package full name: Faulting package-relative application ID:
6. I've tried fixing/reinstalling the C+ redistribution files about 3 times now, to no avail (thinking the error in the event file was caused by a bad/corrupt MSVCR100.DLL).
7. The exception code in the event error is: 0xc0000417 = STATUS_INVALID_CRUNTIME_PARAMETER = An invalid parameter was passed to a C runtime function. (But again, reloading the files didn't solve anything).
8. I have tried removing Apache completely, reloading with default settings, etc. and still having the same issue.
9. Out of desperation, I even tried a registry cleaner (CCClean) and CHKDSK on the drive. Both of those didn't fix anything.
This is it... not sure what else to do/try. Again, everything was fine one moment, and it all stopped working after rebooting my system. I've wasted hours into this issue, and have come up empty handed. I'm beyond frustrated at the moment.
EDIT: The download I used for the server is located here: [URL]...
