How To Setup Email Forwaders In Linux
Feb 16, 2009Server OS: Cent OS 64Bit edition
I have 3 email used to send mails in my servers,
How to forward all incoming mail to those emails to my gmail account,
ADVERTISEMENT
Plesk 11.x / Linux :: Unable To Setup Apple Mail Email Account
Mar 3, 2014I registered a domain name and setup a Linux server on GoDaddy, choosing Plesk panel with Power Pack. Inside the panel I created an email address, which I can access from the webmail interface without problems. I decided to setup my clients as well, using the IMAP configuration, as I'm using multiple devices.
I followed the instructions for Outlook express and I was able to setup the account on my virtual machine, with Windows 7 and Windows Live Mail.Though, speaking of the host machine, a MacBook Pro, I normally use Apple Mail that comes with MacOS. Instructions for setting up Mail are updated back to Snow Leopard at least and they do not work properly. I tried various configurations, but I was only able to receive mail on the account, while sending won't work at all.
I'd like Parallels to update the guide or, at least, to open a KB page with the solution(s) to this issue: I googled it and found out that it is a common issue.
Best Email Setup
Oct 5, 2008I currently use gmail applications but I want to host my emails myself, how would I go on setting up a secure, and spam preventive email server.
View 9 Replies View RelatedDNS Setup And Email Deliverability
Feb 28, 2008I have a dedicated linux server that has 16 IP addresses... and one of those IP address is the main (or shared) IP of the server. So I can host a ton of websites on that one shared IP, and can optionally move individual accounts to one of the 15 other dedicated IP's if I so desire.
I put an account on it's own dedicated IP and it works fine. But I've noticed all my email being sent out is being filtered into people's spam folders... be it hotmail, gmail, yahoo, outlook, etc. My DNS is setup great as far as I can tell (DNSreport confirms) and I have SPF/domainkeys installed for this one account... so I shouldn't have problems authenticating my emails.
The only thing I can think of that would be causing problems for my mail being filtered as spam, is that since this account is on one of my dedicated IP's... that these mail providers (yahoo, etc) are looking at the incoming connection claiming to be the host, which is the main (or shared) IP of the server, and then looking at the MX record for the domain that the email address is, which points to that dedicated IP... and since they don't match... the email provider rejects the email cause the two IP's aren't matching.
Is this a valid assumption? And if so, is there anything I can do about it besides moving that one account back to the shared IP? For the life of me I can't figure this out.
DNS Setup And Email Deliverability
Feb 28, 2008I have a dedicated linux server that has 16 IP addresses... and one of those IP address is the main (or shared) IP of the server. So I can host a ton of websites on that one shared IP, and can optionally move individual accounts to one of the 15 other dedicated IP's if I so desire.
I put an account on it's own dedicated IP and it works fine. But I've noticed all my email being sent out is being filtered into people's spam folders... be it hotmail, gmail, yahoo, outlook, etc. My DNS is setup great as far as I can tell (DNSreport confirms) and I have SPF/domainkeys installed for this one account... so I shouldn't have problems authenticating my emails.
The only thing I can think of that would be causing problems for my mail being filtered as spam, is that since this account is on one of my dedicated IP's... that these mail providers (yahoo, etc) are looking at the incoming connection claiming to be the host, which is the main (or shared) IP of the server, and then looking at the MX record for the domain that the email address is, which points to that dedicated IP... and since they don't match... the email provider rejects the email cause the two IP's aren't matching.
Is this a valid assumption? And if so, is there anything I can do about it besides moving that one account back to the shared IP? For the life of me I can't figure this out.
Email Backup Setup
Nov 28, 2007Its been a while since I have posted on here, anyway heres my problem.
I have a cPanel server in my office which handles the email for 2 domains.
I've also got a reseller account on a helm server.
What I want to do is: if I have a problem with the office server (outage) all emails will be routed to the helm server then delivered back to the office server once available. So any incoming email wont be bounced/lost.
Setup Email Account - Does Not Work
Jun 18, 2008I have a VPS server now with 1and1.com (no wait times with tech support, and very friendly and helpful), only problem is... they haven't been able to help me resolve one of my problems.
My client has their domain registered with Network Solutions. I've already changed the DNS settings to point to my VPS where I've created the domain within Plesk. I can log into my FTP, change the site, yadda yadda yadda just like any other site. So everything works there!
Now, when I create an email account in Plesk I put in my user/pass etc... and create an email account... Great, awesome.
I go into Outlook and put in the email information, incoming/outgoing mail settings, user/pass, etc... and nothing works... It pops up and pretty much nothing happens.
What am I doing wrong for this to not work? Do I have to create a sub domain within Plesk for my domain? If so, I've already done that.
Must I change something over at Network Solutions to reflect the mail server? If so, I've added the MX records of mail.mydomain.com with prio of 10.
What is up? What am I doing wrong? :-(
Client is getting frustrated and I'm lost!
I'll keep everyone posted on the outcome :-)
Want To Setup SSL For IMAP Email And Their Cpanels
Feb 8, 2008I have a couple questions maybe some of you can help me with -
I have a dedicated server and many hosted customers, I want to setup SSL for IMAP email and their cpanels.
Instead of purchasing individual SSL certificates for each domain. I was thinking to just use my hostanme (eg host.myhostname.net) and direct them to that as I have seen the option in WHM.
My question is can I use an SSL cert for email that will act as a "fleetwide" SSL cert?
For example instead of using mail.theirdomain.com could I just use mail.myhostname.com and would it give them SSL without warnings? Of course they would set their email client to mail.myhostname.com..
Is it safe or recommend to use your hostname? I read somewhere to never use your hostname as a domain.. so not sure.
How To Setup Email Client With Eurovps
Oct 2, 2007I basically bought a HPS Complete VPS hosting account with EuroVPS and i am having problems setting up an email client as no web mail client comes by default with that plan.
I asked the eurovps support team 2-3 times on how to set up MS Outlook as my email client for my domain and they answered the same thing and it's not working.
I was wondering,if anyone of you have HSP Complete VPS hosting account with euroVPS and is there anyway to have webmail.
As per there documentation,i am using the following:
username: user
email:user@mydomain.com
smtp&pop3: mail.mydomain.com
smtp port: 25
pop port: 110
Selected to use authentication for outgoing server and checked the option to use same authentication method as incoming server,
Deselected SPA authentication scheme
I did everything as per the documentation they sent me but it's not working,
How To Setup 2 Email Server For 1 Domain
Nov 9, 2007if there is any tutorial to setup 2 email servers serving just 1 domain?
Currently, i have 1 dedicate email server running centos with DirectAdmin, it works just fine.
What's The Best Way To Setup Offsite Email (rackspace) With Server
Jun 28, 2009We have a server where we host the sites and email services, and we are looking to buy a MS Exchange offsite email solution in order to have a reliable dedicated email service.
We are thinking on going with Rackspace MS Exchange solution:
http://www.rackspace.com/email_hosting/exchange_hosting
So now its the hard part, i run my own dns / nameservers at this server so if i just change the mx at my Plesk panel if my webserver goes offline my email will also stop working, correct?
And at my registrar i only can change the name of the nameservers and the ips... and also add more nameservers (im using 2 ns).
So i need to figure it out how to config/setup the rackspace email in a way that when my webserver goes offline my email can keep up working.
The rackspace support team, said to me that they can host/run my dns on their servers in order to have my email working if my webserver goes offline.
So what do you think? Its a goo idea? The only idea?
Or there are better ideas?
How To Setup Outbound Email Forwarding In Cpanel ?
Nov 14, 2006I need to setup forwarding of a copy of all outbound smtp emails from clients domain (setup on CentOS/cPanel) to their backup gmail / pop account...
View 0 Replies View RelatedGoogle Apps Domain Email Setup
Oct 28, 2009I would like some help on setting up google apps emails on a PLESK hosting on 1and1.com.
Here is my MX server setup, and doesn't seem too work. I set it up before but i didn't save it and now I forgot how to do it again.
where the error is?
DNS Setup - Hosting Website Internally - Email Externally
Jul 1, 2008IIS 7.0 - I host several websites. On one of them, the email is hosted externally and not through my exchange server. I have added an MX record to point to the mail server for this domain, but I still get an error when I attempt to send an email from within my local area network. There are no problems with emails generated outside my network, but for emails generated to this domain from within my network, I get the following error:
The e-mail account does not exist at the organization this message was sent to. Check the e-mail address, or contact the recipient directly to find out the correct address.
<mail.<mydomain>.com #5.1.1>
Incidentally, the <mydomain> value does not match the domain for this email domain.
Instead it is the primary domain that I host.
I know that this must be a DNS issue, but I'm not sure how to correct.
Plesk 11.x / Windows :: How To Setup Server For Google Apps (Email)
Apr 17, 2014I want to use Gmail to host my email. I have already confirmed my domain and now I can successfully send emails via my domain.
However in order to receive emails I need to add/update the MX records on my server. I did that (I think) but now, 24h later, the records don't seem to be updated yet.
For instance intodns.com still shows that there is only one MX record: [URL] ....
This is my setup where you can clearly see the MX records required by Google:
I changed the TTL to some minutes but still the changes don't seem to be propagated.
The screenshots are taken from "Website & Domains" -> my domain -> DNS - that should be the right thing to change, correct?
Plesk 12.x / Linux :: Not Able To Send Email To Another Email On Same VPS With External MX Record
May 28, 2015I'm having difficulty sending an email to another email address (with a different domain) which is on the same VPS.The trouble is, on the other domain's VPS control panel, within the DNS settings, the MX records have been pointed externally (to an exchange server). Their email is turned off. But bizarrely, their mailbox is full.
It seems as though Plesk is ignoring the MX records, and sending MY email internally to the OTHER domain's mailbox on the same VPS.How do I get Plesk to send my mail to the correct EXTERNAL MX records?
How Can Setup Remote Desktop In Linux
Jul 2, 2008How can setup remote desktop in linux (fedora or centos) for get remote desktop access to linux server with windows clinet?
View 4 Replies View RelatedNameservers Setup SUSE Linux
Aug 22, 2007How to setup nameservers in SUSE Linux when my server is behind router?
I'd need to setup two nameservers so I could register domains.
NAT IP is the ip shown at whatismyip.com? or is it ip my router gives out eg 192.168.4.103?
Plesk 12.x / Linux :: CLI Vhost Setup Example?
Nov 22, 2014I have to move a lot of customers from old home-grown server setup to a plesk panel powered server.I want to use the CLI to do this and wondered if there was a tutorial showing how to setup the customer and add the subscription/hosting plan for that customer?
I looked over the docs and tested them, but the service plan never shows that hosting is added.
# ./customer --create JDoe -name "John Doe" -passwd sample -country US -notify false
# ./subscription --create example.com -owner admin -service-plan "Default Domain" -ip 192.168.1.100 -login JDoe -passwd "user pass"
I get the email saying that the do moan was setup, but the domain does not show that hosting is affiliated with it.
Linux For Hosting (HOW TO SETUP DNS, APACHE AND SENDMAIL) In RH 9
Feb 25, 2005Starting linux for hosting (HOW TO SETUP DNS< APACHE AND SENDMAIL) in RH 9
hi does anyone know to setup these or could dirct me to step by step tutorials please.
Setup Vpn Server Linux And Windows Client
Jul 24, 2008i have linux.i want setup vpn server on this,and take several account vps to windows clients
how may?
i can`t use of openvpn
do you have another tools?
Plesk 12.x / Linux :: How To Setup Secondary DNS Server
Feb 27, 2015I have Plesk 12 with bind. Currently I have 2 ips on same server, so the 2 name servers are on same machine. When I installed it I didn't do any extreme thing, it just worked.I purchased an other server, because I need it for development. I would like to setup the new server as secondary dns server. I don't use Plesk on the new server.How can I setup this with record sync? I'm using ubuntu ...
View 1 Replies View RelatedHow To Setup Linux Proxy Server Apache+lighttpd
Apr 24, 2007somebody know is possible on some way route traffic before come to web server (apache or lighttpd)?
I want to setup lighttpd on port 80 and apache on port 81 and I want visitors to go direct to apache or lighttpd without url:81 and that must work on this way if somebody visiting url1.domain.com that go to lighttpd on port 80 and if somebody visiting url2.domain.com that go to apache on port 81 and something must route it before lighttpd and apache (and get/post must work), is this possible on some way?
I know that lighttpd and apache can do it but I don`t need it on that way!
Plesk 12.x / Linux :: How To Setup Fail2ban For Admin Access
Feb 3, 2015I have just looked at the plesk panel log - /usr/local/psa/admin/logs/panel.log - and seen an alarming number of attempts to access plesk using the admin user. i.e.
[2015-02-02 14:53:46] ERR [panel] [Action Log] Failed login attempt with login 'admin' from IP 50.62.148.176
I have fail2ban installed and set up for other things...
Plesk 11.x / Linux :: 11.0.9 - Setup DKIM Default For Each Domain
Oct 3, 2013Is it possible to know how can I setup the DKIM default for each domains without manually activate it each time?
View 6 Replies View RelatedPlesk 12.x / Linux :: Bulk Setup FTP Repository Details?
Oct 28, 2014I'm facing the task of migrating nearly 200 domains from 11.5 to a new server running 12. My question is whether any way to pre-populate the
FTP repository : hostname / username / password
Schedule : to daily / specify time / untick suspend domain
This would massively speed up the move, and remove the monotony of retyping these over and over!
Plesk 12.x / Linux :: Caching Bind Nameserver Setup
Aug 20, 2014I would like to setup a caching Bind nameserver for which I need to modify the file /etc/named.conf. The file is automatically created by Plesk however and I am unable to find information on how to modify the file in Plesk.
Code:
#ATTENTION!
#
#DO NOT MODIFY THIS FILE BECAUSE IT WAS GENERATED AUTOMATICALLY,
#SO ALL YOUR CHANGES WILL BE LOST THE NEXT TIME THE FILE IS GENERATED.
// $Id: named.conf,v 1.1.1.1 2001/10/15 07:44:36 kap Exp $
Any way to modify named.conf?
Plesk 11.x / Linux :: Setup Testing WORDPRESS Website Without DNS Change
Jan 6, 2014I'm pretty new to Plesk and would like to setup a testing wordpress website without changing DNS yet. I assume I need to create a webspace for it. But do I use actual domain or an IP address? Wordpress ties up to the domain as far as I know.
View 9 Replies View RelatedPlesk 12.x / Linux :: Setup Backup Manager To Store Backups
Sep 29, 2014I've been running a Plesk server with around 100 domains for years and years now. I've always used a backup service provided by the server vendor, but with a new server, I wanted to consider some of the backup options built into Plesk.
1. It looks like Plesk/Acronis is dead or only for Windows. Is that right?
2. If I add a backup drive to the server, can I setup Plesk Backup Manager to store the backups there (instead of on the main RAID array)?
3. Are there any other 3rd party extensions that I should consider?