I currently have a dedicated server with beachcomber.net and have had a great experience. But I found a promo from myinternetservices.com that may end up as close to 50% off my current price with similar specs. What experiences have people had with either company for dedicated servers? Mainly I'm asking about MyIS since I've already experienced Beachcomber. Does it compare? Which one is better, etc.?
View 1 Replies
How long should I expect my website to be down when I switch from shared to dedicated ip?
View 10 Replies View Relatedwhen cPanel for Windows is launched, would you eventually switch to Windows or stick with Linux?
View 14 Replies View Relateda sales told me i can buy two switch and do series connection,
then if one fail,another will continue to work,
it will take high HA,
but i still can not understand how to do it and work,
could you know what it is?
My hosting company has been great. The server is in a secure place, but I can't help but wonder: what if a bomb hits there or something? What could I do? With all the websites I host, I would like to see what kind of backup plan there could be. Is there a way to have a server on the other side of the world automatically be switched to if it were to go down?
View 9 Replies View RelatedI saw a one port KVM/IP switch, simply a little case that fits in your hand, with 2xPS/2 ports, a VGA and a network output (it didn't even require an extra power input, although that isn't a requirement). I remember it was about 55 euros (about 80USD).
Does anyone remember such a little small thing? I can't find that catalogue anymore..
If you find one with a USB port for virtual media (like 32MB..)
I recently switched my site tdnforums.com over to a new server about a week ago. Some folks are still complaining that they are viewing the forums on the OLD SERVER. Perhaps DNS is taking a long time to switch over but get this... for many people tdnforums.com is switching BACK and FORTH between the old server and the new server. So, on some visits it'll resolve to the new server... on other page refreshes you'll be viewing the forums on the old server. What the heck? This has actually happened to me a few times myself so I know that they aren't crazy.
Why is DNS doing this? Sometimes the site resolves on the old server and then the new?
What's going on here? Why isn't it flipping over 100%? Are there any things I can check as troubleshooting, or is this normal? I've had some long DNS switches before but never this "back and forth" stuff...
I have two quad core processors and load is like 15.
May it be caused by switch if it doesnt let traffic trough properly?
if dmesg grep eth shows 100 full duplex is it normal or should it be 1000 full duplex?
how can I make it 1000 full duplex on centos 5?
Quote:
0000:0a:02.0: eth0: (PCI Express:2.5GB/s:Width x4)
0000:0a:02.0: eth0: Intel(R) PRO/1000 Network Connection
0000:0a:02.0: eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff
0000:0a:02.0: eth1: (PCI Express:2.5GB/s:Width x4)
0000:0a:02.0: eth1: Intel(R) PRO/1000 Network Connection
0000:0a:02.0: eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff
ADDRCONF(NETDEV_UP): eth0: link is not ready
0000:0a:02.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:0a:02.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
0000:0a:02.0: eth1: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:0a:02.0: eth1: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth0: no IPv6 routers present
eth1: no IPv6 routers present
ADDRCONF(NETDEV_UP): eth0: link is not ready
0000:0a:02.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:0a:02.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
0000:0a:02.0: eth1: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:0a:02.0: eth1: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth0: no IPv6 routers present
eth1: no IPv6 routers present
Just in the process of upgrading to new box Plesk 12 (Ubuntu 14.04LTS). ON the previous (plesk 10) I was able to disable ftp services by editing /etc/xinetd.d/ftp_psa - this doesn't seem to be an option now. How to do this on plesk 12?
View 5 Replies View RelatedAs the title says: How do I switch to NGINX only as my web server, while disabling/removing apache in Plesk?
View 2 Replies View RelatedWhat is the difference between Dedicated Virtual vs Regular Dedicated Server?
Also what are the pros and cons of going with Virtual?
to move from shared windows hosting to Dedicated windows hosting. This will be our first dedicated server and experience with dealing it too.
Someone suggested me Rackspace. But they were charging premium rates 440 USD for entry level windows server.
I am currently using a shared hosting but due to increasing traffic and server load my existing host is not able to provide reliable services and I am planning to upgrade my hosting service.
While I was searching for Dedicated Servers, I learnt about Virtual Dedicated Servers but I am not very sure about their reliability? Are Virtual Dedicated Servers useful? My website current serves over 2500-3000 visitors a day resulting in 30,000 pageviews and I am expecting the traffic to grow by atleast 2 folds in the next few months as I start some PPC campaigns and Email Marketing for my website. Can a Virtual Dedicated Server cater such needs assuming my website to be more of less dynamic website written in php?
I have Plesk 11.5 (service provider mode) on a Windows 2008 server IIS7.Most of my sites are developed in .asp and therefore i use a custom 500-100.asp error page that check s the IP of the visitor then displays either a friendly error, or if its my IP a full error of what has happened (it also emails me the error). This allows me to debug pages easily whilst developing and to keep an eye on anyone trying SQL Injection hacks on my sites (as the error and email also have session variables and IP address).I dont have root access to the server as it is a Webfusion dedicated server.I have following the Plesk documentation -
1) Switch on custom errors for the subscription
2) Look in virtual directories and navigate to error documents
3) Find the error in question (500:100) and change it to point at either a file or URL
FILE - I had the data centre add in the 500-100.asp error page in to the virtual template so that my page is available in the list of virtual files - this didn't work but that maybe because its not a static page??
URL - when i add the path it says its incorrect, if i add a fully qualified address, it accepts it but it doesn't work.give me a specific example of the URL that can be entered relative to the root as the format in the documentation isn't accepted. The last step is to restart IIS which is also an issue as i cant seem to do this from the Plesk panel..It is as if it isn't catching the 500:100 error, and only catching the general 500 error??
What is the difference between a virtual private server and a dedicated server?
View 8 Replies View RelatedI am going to be buying a dedicated server from kimsufi Most likely the 2XL Package.
My streamers will be using my server aswell, On weekends we will be running 3-4 streams at a time, weekdays 1-2 at a time.
Spreading all the streams out, at anyone time we will have 300 viewers.
I need to know your advice on this before i go spending money.
How do i convert my dedi into a flash media server, i need red5 or something, thats all i know so far. My streamers wil be streaming to server with FME, And i also want it coded so that my streams can only be embedded on my site.
Basically i dont have a clue where to start, how long would it take me to set up etc....
In addition, what kind of server do i need, windows / linux / traffic / burstable / standard etc..
I'm expected to have around 1000-1500 users at a time after my ad compaign for my site.
currently, my setup is as follows:
VPS in UK
guaranteed memory: 256 burstable : 512
disk: 20GB
traffic: 200GB per month
price : 15 dollars a month
I would like to upgrade to :
guaranteed memory: 1GB
which is better ? to go with VPS ? or dedicated server ? which provider do u recommend ? how much am I expected to pay for my required setup ? what about CPU ?
Is it possible to upgrade a kernel on a dedicated server? I have a dedicated at Server.lu.
I opened a ticket with them, it was open for about a month with no reply.
How can I tell if GRUB or LILO is on the server somewhere?
I'd like to know, how do you backup a cPanel dedicated server to a remote FTP server? WHM's backup only allows you to backup the client's accounts, but not the cPanel settings, or the stuff in /etc?
View 5 Replies View RelatedI'm a a JAVA software developer and it happens that I need to configure a dedicated server running Win 2003.
It's already up and running with static IP address, however hosting offers a "Static IP Address", which doesn't really make sense, cause I already have one?
Other thing is domain name. Current domain name is registered with a different company and we don't really want to transfer it from that company. Can I get away with importing a domain name and changing MX records in the domain control panel?
Last thing is an email server. What do I need to set up an Email Server? I have a domain name with few POP3 email addresses. I thought about using hMail server for windows. What else do I need to do, pay for?
i want to know what is the difference between dedicated server and shared server. I was relaly confused in these services. Couls any one please let me know in detail about these servers?. I will be choosing one of these service.
View 4 Replies View RelatedMy client is looking for a company that can provide managed dedicated servers for use with SQL Server 2k5 and IIS. I believe the client is looking to have everything installed for them and then be handed the keys once complete.
View 3 Replies View RelatedWhats the easiest way to create a private server within a dedicated server running cpanel/WHM/Fantastico?
I need to allow this 'virtual server', to host up to 10 domains, and for them to use their own nameservers, not the ones used on my dedicated server.
I have 2 IPs to spare, but I have no idea on how to do this.
Any help is much appreciated, or if you can guide me on where to get info on this.
i need this new reseller NOT to be identified with my own server (IPs)
I currently have a dedicated server, which is hosting several websites. I'm happy with the service I'm getting, but I'm trying to save money. I'm paying $120/month for the dedicated server. Spending half of that each month would be great.
Right now, the websites are either static websites, or are simple database driven websites with not much traffic. My server load averages are pretty close to 0.01
I would think a VPS would be fine for my needs. However, I may have a site I will host in the future that is database driven and uses Ruby on Rails. It would probably have 10-20 users online at any given time, and maybe several hundred subscribers total.
Would a VPS still work in this instance, or should I stick with a dedicated machine?
We have 1 Gb/s channel. We want connect it to switch, than to two routers (first - main, and second - emergency, which will began work if first one dies).
View 1 Replies View RelatedI'm sending off about 6 servers off to colo soon, and looking for a basic switch..
I would prefer it to be a Cisco switch (but doesnt have to be, just that i'm used to IOS), not used.
Fairly cheap and nothing overkill. Just going to be pushing 20Mbit/sec.
Must haves : vLan capabilities, SNMP, 10/100mbit upink, able to cap ports at non-standard rates (eg. 1mbit/11mbit).
For those who have used 10G switches...which model/vendor would you recommend and why?
View 14 Replies View RelatedI need a basic L3 switch for maybe 25 mbps that will do hopefully up to 50 VLANs and which will not require me to hire someone to configure it.
As much as I like Cisco, that rules them out.
The reason I'd like a Layer 3 switch is so that I can run my backups and inter-server transfers without adding to my bandwidth bill. Also, VLANS are a critical requirement as i have a lot of customers with root on their managed servers.
So i am looking at HP [gasp] switches. How "easy" is the web-based configuration widget? [I'm an advanced unix admin but networking is a mystery to me.]
This is a starter switch and once i have a full cab of servers I'll be able to spend $7K on a pair of 3560s and hire someone to configure them for me ... but until then what can i get to meet my requirements?
This week connectswitch's service has not been that good. Basically first they restart the node without prior notice and our vps was down for 7 hours. and now we buy our cPanel license via them and they havent paid it so the license is now expired although we have paid them for it.
View 11 Replies View Relatedwe need more than 24x10 GE ports L2 switch. We have few Foundry SX800.
But we need opinion about Force10 S150 or Juniper EX-2500?
Or stay with Foundry and its SX1600?
i find the brand of SMC,
do you have experience with SMC switch?
