Cant Get Plesk + SmarterMail To Work
Oct 31, 2009
Trying to get Plesk 9.2.3 (free - 1 domain) to talk to SmarterMail 6.5 (free) - it says "Error: Some fields are empty or contain an improper value." after setting it up on port 9998, username "admin" and the correct password.
I can access SmarterMail fine at [url]and [url]. SmarterMail is configured through IIS7, its in it's own application pool. Since im on 64bit, Mailservice.exe is configured to run as a 32bit service.
I downloaded SmarterMail Free edition, its installed under the Lite edition - according to here [url thats what SmarterTools recommends.
View 2 Replies
ADVERTISEMENT
Aug 15, 2012
I am just wondering if Plesk 11 supports the ability to manager smartermail installed on a different server?
I know 10 didn't, and I dont' see that in 11 but just wanted to check.
View 1 Replies
View Related
Jul 15, 2015
We have migrated from an old Expand/Plesk with SmarterMail setup to PPA with SmarterMail. One issue we've noticed is that with Expand, if we disabled the mail on a domain, in SmarterMail it would rename the domain with a .disabled on the end which prevented issues from other users trying to send to that domain on the same SmarterMail server. In PPA when disabling a domain, it disables the mail on SmarterMail but does not rename the domain.
To try illustrate the issue:
If say outsidemail.com is in PPA for hosting but has email elsewhere and mail is disabled for them in PPA, because it does not rename the domain to outsidemail.com.disabled, anyone on outsidemail.com cannot send to anyone on that SmarterMail server as it wants them to authenticate. Also if someone else on that SmarterMail server tries to send to outsidemail.com it will try and send locally.
There is a work around for the second problem by going into the the outsidemail.com domain on the SmarterMail service and setting it to use MX instead of local, but this still does not allow them to send to anyone else on that server.
We can go in and manually rename the domains in SmarterMail but this is difficult to do for everyone not using the SmarterMail. Is there a way to have PPA rename the domain in SmarterMail like the old Expand/Plesk environment did?
View 1 Replies
View Related
Jan 28, 2015
The Setup:Plesk Server hosting domains
The Goal:Have Plesk Accounts on it's server be able to sync to an external SmarterMail server, rather than installing SmarterMail on that same serve (which seems to be available natively).
View 1 Replies
View Related
Sep 26, 2013
I'm setting up a server that has both Plesk 11.5 and SmarterMail 11.6 on it. I'm trying to get Plesk set to use the SmarterMail, and it sees it fine in the Server Components, but when I try to set it as the default and put in the password information it comes back and says: Error: Some fields are empty or contain an improper value.
I thought maybe it didn't like some of the characters I had in the password, and tried simplifying that but it didn't work. So I'm wondering if it is just because Plesk 11.5 won't work with SmarterMail 11.6 yet?
View 3 Replies
View Related
Apr 7, 2014
I am running plesk 11.05 Plesk on windows server. I have noticed this things twice...
While migrating accounts one server to another Smartermail not showing actual mail received date. For all accounts and emails Smartermail showing Migration date..
My more than 10000 emails showing migration date as received date..
View 1 Replies
View Related
Nov 21, 2007
I have this strange problem with smartermail, it can send perfectly to hotmail and gmail but when it tried sending to yahoo accounts, there is always a delay and the email end in the bulk folder.
Such problems does not occur with my qmail or icewarp merak. Any idea how to solve? Have already emailed Yahoo hoping to get a whitelisting of my IP. Besides installing domainkeys any other ways?
View 3 Replies
View Related
Dec 8, 2008
I want to setup Remote Spamassassin for Smartermail server. I want to the setup the spamassassin on a linux box. Can anybody help me with this as I am not getting any definitive guide for the same?
View 3 Replies
View Related
Jul 20, 2009
A prospect wants an email server that could allow him to restrict some accounts and make them send emails only to the companies domain.
I was thinking of setting up a VPS with smartermail, so I was wondering if this be done with smartermail?
View 2 Replies
View Related
Jul 31, 2008
I have a new Windows 2003 Server + Dotnetpanel + MSSQL 2005, which was already installed.
Then I have downloaded SmarterMail,SmarterStats & SmarterTracker and installed them with default settings. After installation, I had to setup my admin username & password.
I can see the login pages for all three of these, but when I login as the Administrator, or a user, and click on any of the buttons, nothing actually happens. Why would this happen?
There's a blue navigation bar on top, with the menu items, but the content itselft doesn't load at all. I have reinstalled all three apps, but still get the same errors.
Here's some screen shots:
[url]
[url]
View 5 Replies
View Related
Mar 2, 2015
I set a new Plesk 12 server (Debian 7.8) and migrate some domains from a plesk 11.0.9 server.After this, FTP does not work. I can connect but I receive this error:
Error:The data connection could not be established: ETIMEDOUT - Connection attempt timed out..And no list of folder or files found. Not one domain, any domain.I restart xinetd and fil2ban but still same problem. Via control panel I can see the files but not via FTP.
View 4 Replies
View Related
Sep 18, 2006
Have been trying to get BFD and APF Antidos (not at same time) to work on Ubuntu 5.10 / Plesk and 6.06 (No Plesk yet) servers. APF appears to work fine after checking /sbin/iptables -L -n
Both cronjobs run but getting a lot of brute force attacks to ssh and Plesk but no offending IP's are being blocked and no e-mails reporting that they are being blocked. Log files for BFD and Antidos are always "0". Everything setup and configured the same as on my previous CentOS servers.
Can't find much on the net with this newer OS. Can anyone point me in the right direction to get one of these to work on the systems above? Thought it might be a path error referencing rc.d but put a symlink in for that and no change.
View 2 Replies
View Related
Jul 5, 2015
How to enable subdomain? I do not work for subdomains SSL...
View 6 Replies
View Related
Sep 17, 2014
I has Parallels Ples 11.X with Cent OS 6.5 and yesterday i tried to upgrade to PLESK 12.0.18.
Now, I can't start the apache module because it´s impossible to create the config file
The issue is:
Details: [2014-09-17 19:46:27] ERR [util_exec] proc_close() failed
[2014-09-17 19:46:34] ERR [panel] Apache config (14109759800.30476400) generation failed: Template_Exception: Can not restart web server: Service /etc/init.d/httpd failed to start
Service /etc/init.d/httpd failed to start
file: /usr/local/psa/admin/plib/Service/Driver/Web/Server/Apache.php
line: 104
code: 0
Can not restart web server: Service /etc/init.d/httpd failed to start
Service /etc/init.d/httpd failed to start
I try with cp the certifies and writing a new private key but it didn't work.
I try to reinstall the Plesk but it didn't work.
View 8 Replies
View Related
Feb 5, 2015
For a Magento shop I want assign a dedicated IP to a domain. When I choose this second IP in “Subscriptions” --> Change Hosting Settings” and then select this IP under “Tools and Settings --> IP Addresses” as dedicated (or shared too) for this domain, calling the domain results in the Webserver´s default Plesk Page.
The Shopsite is not shown, but was working well with the shared standard IP.
Calling the IP directly with the browser shows the start page of the shop in raw HTML ( no CSS ).
Choosing a link results in a “Not found” page.
View 4 Replies
View Related
Jun 27, 2015
I'm running Ubuntu LTS 14 with Plesk 12 installed and I registered an domain name under subcriber/customer on my Plesk panel and I created a mail which was already registered under that name in the old server from which I removed the domain completely. I have installed Roundcube and Horde from Plesk installer, and at the avalaible webmail services are shown: Atmail,Roundcube and Horde all activated and avalaible. I try to choose one of them for the email but none of them works. When I try to access the webmail from the address: URL....it shows me default Plesk page. From the address: URL.... it says not found. The same for Horde and Atmail.
Its very weird because the same webmails services are working correctly under my main webspace with other domain: URL....I've tried changing something to the default plesk page from the file manager and it works so the domains seems to be connected with the server properly.
View 7 Replies
View Related
Oct 15, 2014
I have multiple domains on a single IP address and many require SSL Certificates.
I have enabled SNI in /etc/psa/psa.conf so it now says "SNI_SUPPORT true" as it was originally set to False. Setting this to TRUE then enabled the SSL option in 'Websites & Domains'.
I then purchased and installed the SSL Cert and activated it in the domain settings. On a dedicated IP address, this would work.
When I checked the certificate. it was not using the assigned SSL cert, instead it was using the Servers default certificate (plesk) that is assigned to the shared IP address.
When I check, I get the error message: "[warn] RSA server certificate CommonName (CN) `plesk' does NOT match server name"
I then rebooted the server and it made no difference. I changed the domain to a spare dedicated IP address, and the SSL Cert was certified correctly (it used the correct SSL Cert). When I changed it back to the shared IP address, it reverted back to the shared IP address' SSL cert. So the new SSL Cert was being ignored.
For info: currently running 11.0.9 on Centos 5 and I'm testing this with latest IE, FF, Chrome so it accepts TLS Server Name Indication.
View 2 Replies
View Related
Mar 14, 2015
I tried to use the software x2engine, but the software seems not to work.Furtheremore I tried the following softwares:
-webzash
-frontaccounting
-sql ledger
the attached screenshots appear when I load the pages! I used to just rent a webspace from a hoster and have my domains there, but now I decided to move to a VPS Server but as you see I can not get this stuff to work!
working are the softwares:
-webtrees
-wordpress
And how do I import Database exports from phpmyadmin?
View 4 Replies
View Related
Dec 11, 2014
I installed Roundcube in Plesk 12 through the link: URL....But it doesn't work. I adjusted the mailsettings for a domain to use Roundcube. With the fresh created emailaccount and you click on the webmailicon, it loads the following url but the page does not exists: URL....Aren't there any instructions for using RoundCube with Plesk? After adding Roundcube as an component are there more steps involved to get Roundcube up and running with plesk?
View 19 Replies
View Related
Apr 25, 2015
I've got a Plesk 12 server with the "Slave DNS Manager" extension installed.I've also got a CentOS 7 server that I would like to set up as a slave DNS server.I've installed BIND on the slave server and opened ports 53 and 953.I've followed the instructions on this page but I can't seem to get a link between the two servers: URL....
I've also tried the config that the Plesk panel provides like the case in this thread, I get the same results: URL....
View 2 Replies
View Related
Aug 13, 2014
PHP Mail Function not work and i cant fix it :/
i dont know whats the problem, but php.ini is right.
i also test email-function here: [URL]
View 2 Replies
View Related
Nov 19, 2014
I can't install or remove anything. when i click on continue it's just refreshes the page and come backs to the list.
I have checked error log and the latest error log is ERR [panel] Specified column "isAllowed1 is not in the row.
And i don't think this error related to the problem. When I click on continue it does not create any line in the error log.
View 10 Replies
View Related
Sep 22, 2014
I try to follow this: KB: Customer & Business Manager stuck on post-upgrade processing like the warning tell me to do:
Code:
Parallels Panel pre-upgrade check...
WARNING: SSO start-up script has wrong execution priority. Please, check [URL] .... for more details.
But I try to proceed the first step (for Centos 6.5):
Code:
[root@mydomain conf.d]# for i in `find /etc/sw-cp-server/applications.d/ -type f -name *sso-cpserver.conf`; do mv $i $i.moved.kb.112666; done
[root@mydomain conf.d]# rpm -q sw-sso | xargs rpm -e --nodeps --justdb
[root@mydomain conf.d]# /usr/local/psa/admin/sbin/autoinstaller --select-release-current --upgrade-installed-components
Doing restart of Parallels Installer...
[code]....
View 5 Replies
View Related
Feb 3, 2015
I did the following configuration:
Postfix
in the /etc/postfix/main.cf I added the following configuration parameter
recipient_delimiter = +
Managed a sieve script in webmail which contains the following:
1: # Sieve Filter
2: # Erzeugt von Ingo (http://www.horde.org/apps/ingo/) (03.02.2015, 02:53:39)
3: require "fileinto";
4: # Plustest
5: if address :all :comparator "i;ascii-casemap" :contains "To" "+plustest" {
6: fileinto "INBOX.plustest";
7: stop;
8: }
I created a folder in my INBOX with the name plustest, now I sent me an email from an outside freemail-account to see if it works. In the logfile /var/log/maillog I can see the following entry:
Feb 3 15:06:25 mail postfix-local[18290]: cannot chdir to mailname dir <name>+plustest: No such file or directory
Feb 3 15:06:25 mail postfix-local[18290]: Unknown user: <name>+plustest@<dom.tld>
Feb 3 15:06:25 mail postfix/pipe[17708]: 0ECAF4C1B3: to=<name+plustest@dom.tld>, orig_to=<aliasname+plustest@dom.tld>, relay=plesk_virtual, delay=0.61, delays=0.52/0/0/0.09, dsn=2.0.0, status=sent (delivered via plesk_virtual service)
I changed my real name to <name> and my domainname to <dom.tld> in this post.
View 1 Replies
View Related
Jul 15, 2015
I installed wordpress on a website space of my customer using the plesk install-wordpress function.
I bought a wordpress template to templatemonster.com .
I followed instructions to install it [URL] .....
After the cherryframework upload, when I click on "activate", the server returns a 500 error.
I contacted the templatemonster.com technical support, and they say that it is a plesk issue ( [URL]
View 5 Replies
View Related
Nov 18, 2014
I trying to setup php5.4 on a Plesk 11.0.9 server using this guide:
[URL]
It works without problems but I can't get it to work on a subdomain.
As far as I know, the only difference should be the path in the vhost.conf. I changed that to match the path to the subdomain, restarted apache but it still won't start php5.4
View 1 Replies
View Related
Jun 30, 2014
Since upgrading to 12.0.18 Update # 5 fail2ban stopped working.
Code:
[nimda4597@xxxx fail2ban]# service fail2ban status
fail2ban-server (pid 1881) is running...
Status
[Code].....
View 8 Replies
View Related
Jul 2, 2014
We have updated our Plesk 10.4.4 to 12.0.18. We want to use PHP with FastCGI (Apache) and get always the following suexec - error:
command cgi_wrapper not in docroot (10004)
We use CentOS 6.4
View 3 Replies
View Related
Dec 12, 2014
How to connect nginx to work with directory web_users for some virtual host?
This directory contains two accounts (user1, user2) with a large amount of static content (files .jpg), the downloaded web users themselves. At the moment they are processed by Apache, which causes an additional load on the server.
In hosting configuration for virtual host "domain.tld" set:
document root: httpdocs. (That is, the "httpdocs" and "web_users" directories are on the same level).
In the web server configuration settings (in additional nginx directives) i can't use the directive "server" (refuses to save), where you can specify the location of the additional "document root" for nginx.
View 3 Replies
View Related
Mar 23, 2015
I am wondering whether client SSL certificates work for mail as well as their website?
Can it work over SNI or by dedicated IP or both? Does Postfix even have SNI support...
View 10 Replies
View Related
Jul 19, 2012
My download button doesn't work in File Manager.
View 2 Replies
View Related
