2 Ips Routed To One Server
Aug 19, 2007
My colo tech guy told me that it's possible to route two ip addresses to one server. The reason why I want to do this is to have one ip be the main domain and the other be the static domain. Both domains goto the same server but there are two server daemons (apache and lighttpd) installed on the server. Each server listens on one ip (so light = static domain ip and apache = main domain ip).
I have everything setup, but I am just wondering that will this work with the routing setup? Can one network interface card handle both ips?
View 3 Replies
ADVERTISEMENT
Aug 9, 2007
So I have a bunch of IP's that are routed a VLAN a bunch of machines are on which is great. They can be put on any machine, but the problem right now is it is taking up to 4 hours for them to route from one machine to another (I am doing it one IP at a time not by blocks)
The process of adding and removing ip's is being done through cPanel's WHM. The reasoning for this is due to ARP on the router for the specific IP. This is a big issue if you're looking to migrate IP's from one machine to another that contain customers this is a long wait.
Now from the datacenter I was told you're going to need to wait the 4 hours for the refresh. Now what's strange is I was also told virtuozo apparently can swap ip's to other boxes without issues because it apparently it has a mechanism in place to release the ip's from the router/switch by communicating to it so the old arp is gone. I also asked someone using OpenVZ and they said theirs was instant as well to swap between boxes.
So is there a special command I should be issueing to get the router/switch to drop the IP instantly? Or any suggestions on how to get this to be more instant than ~4 hours for an IP to route to the correct machine.
View 3 Replies
View Related
Dec 10, 2008
I have one question about configuration Virtuozzo or OpenVZ. I have for example 90.90.102.192/26 subnet where Virtuozzo host (Linux) machine (IP 90.90.102.195) resides.
Now I have new subnet (90.90.100.0/24) routed to my default gateway 90.90.102.193. What to do and how to route these new IP addresses to my Virtuozzo VPS clients?
----------------
90.90.102.193 - my router
----------------
|
|
----------------
90.90.102.195 - virtuozzo host
----------------
|
|
----------------
90.90.100.0/24 - vps clients
----------------
Its better routed or bridget network?
View 0 Replies
View Related
May 8, 2007
I've got a VPS which is serving as the main server for a number of sites. Web Server, SSH Server, and Mail Server.
What I've got running:
Apache2, PHP5, MySQL5, Dovecot, Postfix
One of the sites is a growing forum with a MASSIVE photo album. This is the site where I notice the most slowness.
Changing the server software is not an option - Only optimization.
Quote:
Originally Posted by httpd.conf
ServerTokens OS
ServerRoot "/etc/httpd"
PidFile run/httpd.pid
Timeout 300
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
StartServers 8
MinSpareServers 8
MaxSpareServers 13
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 50
</IfModule>
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
Listen 80
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule cgi_module modules/mod_cgi.so
Include conf.d/*.conf
User apache
Group apache
Quote:
Originally Posted by my.cnf
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
old_passwords=1
[mysql.server]
user=mysql
basedir=/var/lib
[mysqld_safe]
log-error=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
View 8 Replies
View Related
Mar 7, 2009
I looked a lot - can not find solution ....
I want to transfer a file from [url]to [url]or [url]Without it will pass my localcomputer (slow upload)
It can be also a script i will install like this one - this is only for images
[url](remote)
View 7 Replies
View Related
Oct 16, 2013
I have Plesk 11.5 (service provider mode) on a Windows 2008 server IIS7.Most of my sites are developed in .asp and therefore i use a custom 500-100.asp error page that check s the IP of the visitor then displays either a friendly error, or if its my IP a full error of what has happened (it also emails me the error). This allows me to debug pages easily whilst developing and to keep an eye on anyone trying SQL Injection hacks on my sites (as the error and email also have session variables and IP address).I dont have root access to the server as it is a Webfusion dedicated server.I have following the Plesk documentation -
1) Switch on custom errors for the subscription
2) Look in virtual directories and navigate to error documents
3) Find the error in question (500:100) and change it to point at either a file or URL
FILE - I had the data centre add in the 500-100.asp error page in to the virtual template so that my page is available in the list of virtual files - this didn't work but that maybe because its not a static page??
URL - when i add the path it says its incorrect, if i add a fully qualified address, it accepts it but it doesn't work.give me a specific example of the URL that can be entered relative to the root as the format in the documentation isn't accepted. The last step is to restart IIS which is also an issue as i cant seem to do this from the Plesk panel..It is as if it isn't catching the 500:100 error, and only catching the general 500 error??
View 1 Replies
View Related
Nov 21, 2006
I am currently running Google Analytics/Urchin 5 (v5.7.02), on a server, the server has started to act up, (on its last legs etc) and now I am trying to transfer the Urchin Software to a new server, where it would work effectively.
However upon installing the urchin software on the new server and running it (localhost:9999), I am presented with An Action Items Page, and these following choices
Obtain Demo License
Buy License
Activate Pre-Purchased License
I choose ‘Activate Pre-Purchased License’ pop in the Serial number and complete the registration then…
---------------------------------------------------------
Urchin Licensing Center -- Error!
An error has occured during your transaction, please use the back button and correct the problem. The specific error message is:
• Unable to generate a license. Some possible reasons:
Your serial code is currently active <<< How do I disable it and use it on another server?
---------------------------------------------------------
So all I want to do is deactivate the serial and reactivate it on another server.
Does anyone have experience with this or a similar problem or have a solution to this problem. Any help be most appriciated.
Or even a Contact Number so that i can get some one over the phone!
View 2 Replies
View Related
Nov 7, 2009
This is the scenario, domain.com are setup on server1, however server2 also has the same profile of domain.com as we use ns3 and ns4 using domain.com. This works fine with the nameserver setup on server2.
However I encounter problems as the emails from server2 won't reach server1 as there are duplicate profile on server2.
My question is how do I setup the DNS in cpanel/whm from server2 so the emails from server2 will reach server1?
Server1 (www.domain.com)
ns1.domain.com
ns2.domain.com
Server2
ns3.domain.com
ns4.domain.com
View 6 Replies
View Related
Apr 22, 2009
I just want to use a server for file sharing, it will have nginx and that's it. I'm looking at centos, or freebsd, but I been using centos forever now and I'm not sure how to use freebsd, should I just stay with centos?
Do I tell my hosting provider to just install the OS and give me ssh action and that's it? Don't install any control panels or any other stuff? I want one domain and one subdomain on it though and ftp action.
View 8 Replies
View Related
May 12, 2009
Remote Spamassassin for Multiple Smartermail Server
I want to setup Remote Spamassassin(On Linux) for Multiple Smartermail servers. I want to the setup the spamassassin on a linux box
How i can setup this with multiple smartermail servers.
View 6 Replies
View Related
Jul 4, 2007
what is the fast and best way?
View 4 Replies
View Related
Jul 20, 2015
I'm wondering whether it is possible to perform a full server migration to a new Plesk server with the same hostname or will Plesk give an error about the hostname being the same?
The new server would not be accessible by hostname (only via IP) until DNS and glue records were changed after the migration.
View 1 Replies
View Related
Aug 31, 2008
I've been developing a small 2D MMORPG lately. I bought a VPS to run the server on a few days ago and sadly it doesn't work so well. Sometimes the loads go pretty high (afaik not caused by me) and MySQL freezes, causing the server to just wait for MySQL to unlock, hanging all the players around on the map. Not a good thing.
Anyway, the game is very small scale, and I'm not planning to have more than maybe 30-50 players online. It does not suck up much CPU, I had ~10 guys online and loads stayed down at 0.00 on the VPS box.
Problem with getting a dedicated is our very low budget. As I'm still underage and living at home hammering my pc and don't have any real incomes, we're talking numbers like $ 30 - $ 50 USD per month - it's really hard to find for that price in Europe.
Requirements:
Monthly payment, $ 30 - $ 50 / month, no setup (or very small setup, like $ 20)
10Mbit/s or faster connection, 100GB traffic should do
500MHz CPU is all cool
512MB or more RAM
5GB diskspace is enough
Has to be in Europe due to ping times (< 100ms)
Linux, Debian 4.0 prefered
If anyone knows where I could get something like this for a low price, $ 30 to $ 50 USD, it'd be great.
View 12 Replies
View Related
Aug 28, 2009
I have been searching everywhere trying to find a tutorial but It is not going anywhere. Basically I need to create 2 nameservers for Godaddy and pretty much so when i type http://mysite.com it goes to my site. I can access everything from http://myip and everything works. Now is there a step by step on how to actually do it in the DNS Manager? I need help like what IP address do I use is it the router ip? The external IP?
View 7 Replies
View Related
Mar 2, 2009
i want to shift my domain to one server to another server and the problem is how can i shift my email accounts data to one server to another server.
View 8 Replies
View Related
Dec 8, 2008
Site is currently running on a single code single cpu p4 server. Am thinking of upgrading to a quad core Xeon server.
My site is pretty dynamic with lots of hits to php / mysql, and has trouble keeping up with the requests sometimes. Would a quadcore Xeon significantly help?
Server Software:
Windows 2003 Server
php 5.2.6
apache 2
mysql 4.1
Current Setup:
P4 2.8 single core/cpu.
Proposed setup
Xeon 3210 quadcore
I guess my confusion lies in the following:
1. Can win2003 server make use of the quadcores?
2. Does php / apache / mysql make use of the quadcores?
3. Will i see a significant increase in the amount of pages i can serve?
View 5 Replies
View Related
Oct 23, 2009
I need to move an SSL certificate from a cPanel server to a Plesk server.
View 3 Replies
View Related
Feb 11, 2009
What is the difference between a virtual private server and a dedicated server?
View 8 Replies
View Related
May 10, 2009
I am going to be buying a dedicated server from kimsufi Most likely the 2XL Package.
My streamers will be using my server aswell, On weekends we will be running 3-4 streams at a time, weekdays 1-2 at a time.
Spreading all the streams out, at anyone time we will have 300 viewers.
I need to know your advice on this before i go spending money.
How do i convert my dedi into a flash media server, i need red5 or something, thats all i know so far. My streamers wil be streaming to server with FME, And i also want it coded so that my streams can only be embedded on my site.
Basically i dont have a clue where to start, how long would it take me to set up etc....
In addition, what kind of server do i need, windows / linux / traffic / burstable / standard etc..
View 9 Replies
View Related
Jan 10, 2008
I have a linux server for a video sharring site
The video encoder that I prefer to use will only work in a windows enviorment
The windows server would pass off the converted video to the Linux server.
Will a Samba server for Linux allow a Linux machine to connect and share files with a Windows machine work for this application.
Although it's probably a dumb question but can Linux and Windows exist on the same server?
View 3 Replies
View Related
Dec 1, 2008
I am not using IIS and the built FTP server. Is ther other recommended FTP server to use in a windows 2008 dedicated server?
View 5 Replies
View Related
Jan 1, 2008
for setup and configuration instructions for setting up mail server on a Fedora Core 6 server. I googled it and most of the links are described with steps while installing OS, but i need to configure a mail server on a server where my site is already running.
View 1 Replies
View Related
Sep 25, 2007
I'm running a local department website using xampp (apache, php, mysql) and we have a corporate lotus notes mail server. Is it possible to connect to and send mail via lotus notes using something like sendmail running under xampp?
View 0 Replies
View Related
Oct 20, 2007
i am currently with a host, hosting my important sites. I am now going to purchase some space from another host purely for storage purposes and bandwidth usage as they are within my budget.
Now i have my primary domain with my main host, and i would like to have a script or link from my current host which leads onto my 2nd host for users to upload their images or files. Now i have a problem, the second host that i will have will not have a registered domain attached to it, but rather it will be just storage.
I would prefer to have a subdomain from my primary host pointing to my second host. The problem is where will the subdomain point to? Or will it even work that way without having to purchase another domain?
View 4 Replies
View Related
Dec 21, 2008
if it's possible to use ODBC to connect to a Windows box from a Linux cPanel server. We have attempted connections from PHP (both as CGI as well as Apache module) and we get:
Fatal error: Call to undefined function odbc_pconnect() in...
and
Fatal error: Call to undefined function odbc_connect() in...
Is ODBC possible on cPanel servers?
View 2 Replies
View Related
Apr 14, 2007
I am being hacked & I don't know how they are getting files on my server. They are doing it on two of my domains, I suspended one and then they got it on the other. My FTP access log does not show anything suspicious..
How can I find their doorway?
View 4 Replies
View Related
Oct 24, 2007
I have a collocated server which I'd like to do some upgrades to. I'm having it shipped back to me so that I can do the upgrades myself. However, since I use this as my primary email server, I need help setting something up so I have no email downtime.
I have a cheap shared hosting account with DreamHost so one idea I have is to point the domain to their servers and handle things through there for a bit. This seems like the "brute force" way to do it though since I have to wait for DNS propagation and what not. Another idea was to use a service like DynDNS' MailHop BackupMX which does storage and forwarding. However, this service is kind of expensive ($30) considering I'm only going to use it a week or so.
View 1 Replies
View Related
