I'm running a local department website using xampp (apache, php, mysql) and we have a corporate lotus notes mail server. Is it possible to connect to and send mail via lotus notes using something like sendmail running under xampp?
View 0 Repliesto upload some documents to my server.
Typically I have no problem doing this through Filezilla back in the states because I have a direct internet connection. However, where I am currently living I must go through a Proxy server.
I first tried connecting to the server with everything unchanged from back home and of course it didn't work. Next I went under settings and changed the proxy settings by selecting SOCKS4 (guessing), entering the host address for the Proxy server and the port number, but still no luck. I've also tried SOCKS4A and SOCKS5 with no luck.
I've also had similar problems with other less important software like AIM. Here I can also configure proxy settings, but it still does not work. My browsers work fine, but of course they were also configured with the proxy settings.
We are currently having a server with serverloft and as we are in the trial phase have just a few trial websites hosted on it. Now since today we have a curious issue on one of our website
It is not being accessible via a particular network of computers even though till yesterday this network of computers was able to connect to the website.
The website is working fine from all other computers and networks that we are trying to access it from. Now my question is how is this possible. The DNS is configured correctly as the website is being accessed by other networks and has been hosted on this server for quite some time
Also this same network of computers was able to access this website until a few hours ago No changes have been made to any IP firewall or any other server settings at our end.
When we run a tracert from this network it says Unable to resolve target system name
I dont know if the blame lies with the ISP as till yesterday this network was able to access everything fine
I got my backup server yesterday. It's connected to the second NIC on my main server, where I have all of my domains/accounts.
The server provider gave me a password and a ip address to the backup server, 192.168.x.x
I have tried to log in to the backup server with ssh and ftp from my main server.
Nothing happens, I can't connect.
Am I doing something wrong? I thought it just was to log in to my main server, and then ssh or ftp to the backup server.
i have a mysql databse on 1 server hosted by a company and i want to connect to that databse from a website hosted on another server by another company.
i have chnaged my php connect script from 'localhost' to the ip of the name server on port 3306, i know this isnt right..
how do i find the ip of my website and port of the db?
ERROR:
Error connecting to IMAP server: localhost.
111 : Connection refused
I keep getting this error message from Squirelmail when i try to login can someone help me out.
I have a dedicated server and a domain I bought from godaddy. The dedicated server currently runs from an IP. So if I were to visit 79.xxx.xxx.xxx/whm, I would be able to access WHM. However, how do I change the IP to go to a domain? So when I go to the domain xxxxx.com/whm I go to the server's whm, and so that I can use the domain to host my site.
View 13 Replies View RelatedI seem to be having problems every 20 accounts i create through clientexec work fine than i whole bunch dont i seem to be able to fix it by using a new hash key.
However it happened again at 44 accounts i dot have any idea what to do! i get a error log saying this.
If it helps all the signups are over 2 days.
Sorry, we could not create the account. The following error was
produced: The package was not found on the server.
Here is the list of plans found on the server:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
[url]
<html xmlns
<head>
<link rel
<meta http-equiv
<title>cPanel® 11</title>
</head>
<body>
<div id
<div id
</div>
<div id
<form action
<input type
<table width
<tr>
<td align
</tr>
<td>Username</td>
<td><input type
<tr class
<td>Password</td>
<td> </td>
</table>
</form>
<br />
</div>
© cPanel, Inc. 2006-2008
</body>
</html>
I have a problem connecting to my win2003 server from my work. The thing is that everything is turned off. I dont have administration rights. The remote connection in win xp doesnt work, telnet also dont work. Im behind proxy, all ports are closed. Is there any way, to install software on my server or smth else, so somehow i could connecti to my server remotely? I need to be able to connect to gui interface or maybe just be able to start programs, which crashed.
View 12 Replies View Relatedi'm on Linux dedicated box -DirectAdmin panel
I use Squirrelmail to se my e-mail. When i try to log inn and read mail i get this message: Error connecting to IMAP server: localhost. Where can i change this......
Squirrelmail
SquirrelMail version 1.4.17
By the SquirrelMail Project Team
ERROR
Error connecting to IMAP server: localhost.
111 : Connection refused
webmail
ERROR (2): fsockopen() [function.fsockopen]: unable to connect to localhost:110 (Connection refused) (/var/www/html/webmail/inc/class.uebimiau_mail.php:80)
RoundCube Webmail
Connection to Imap server failed
Read on another forum, that this can solve the problem
/etc/rc.d/init.d/imaps restart
/etc/rc.d/init.d/imap restart
-bash: /etc/rc.d/init.d/imaps: No such file or directory
-bash: /etc/rc.d/init.d/imap: No such file or directory
telnet localhost 143 for imap or 993 for imap over ssl
Usage: telnet [-8] [-E] [-K] [-L] [-X atype] [-a] [-d] [-e char] [-k realm]
[-l user] [-f/-F] [-n tracefile] [-r] [-x] [host-name [port]]
Also Xinetd restart don't help
[root@server etc]# /etc/rc.d/init.d/xinetd restart
Stopping xinetd: [ OK ]
Starting xinetd: [ OK ]
Looks like that Imap isn't installed ?
Correct me if i'm wrong ..............
How do you go about setting up virtual machines so that they can see sites hosted on the host machine?
I've got Virtual PC 2007 and the disk image that MS supply for testing IE6 on Vista machines and I'm having trouble accessing my local Apache server (set up with XAMPP). Until recently I was able to set the XP VM's LAN settings to use a proxy server with the IP address of the host machine, but I got migrated to ADSL2+ yesterday by my ISP and now that's no longer working.
To access my sites locally, I set up httpd.conf like this:
PHP Code:
<VirtualHost *:80> DocumentRoot "C:PathToFolder" ServerName siteName.local</VirtualHost><Directory "C:PathToFolder"> Options FollowSymLinks AllowOverride None Order allow,deny Allow from all</Directory>
and then in Windows hosts file I add 127.0.0.1 siteName.local.
So what's the best way of getting the host and VMs to talk to each other?
I setup FTP access on Plesk, then when i try connect to the server it seems to be trying to access through a old installation on FileZilla Beta server manager, that was obviously installed on the server a while back. I can only think it is not using which ever FTP manager Plesk uses.
View 2 Replies View RelatedIt may be useful to someone, sometimes the queded mail list gets gigantic because of some spammer and other emails that aren't spam could get deleted when using cPanel to control it.
The better solution would obviously be to prevent spammers of sending all those mails, if you know a better solution on cPanel 11 please share it with me.
==== REMOVE MAILS BY ID ====
/usr/sbin/exim -v -Mrm (MAIL ID HERE)
==== LIST QUEDED MAILS ====
/usr/sbin/exim -bp
==== OUTPUT NUMBER OF QUEDED MAILS ====
/usr/sbin/exim -bpc
==== DELETE FROZEN MAILS ====
/usr/sbin/exim -bp | awk '$6~"frozen" { print $3 }' | xargs exim -Mrm
==== DELIVER FORCEFULLY EMAILS ====
/usr/sbin/exim -qff -v -C /etc/exim.conf &
==== FREEZE MAILS FROM SENDER ====
/usr/sbin/exiqgrep -i -f (MAIL ADDRESS HERE) | xargs exim -Mf
==== REMOVE MAILS FROM SENDER ====
/usr/sbin/exiqgrep -i -f (MAIL ADDRESS HERE) | xargs exim -Mrm
I've now VPS with CentOS and on Hypervm.
Can I connect to it using VPN or other client application as Desktop? or only Shell?
and if I want to setup on it ftp client like FileZella to get my files from the previous host directly what should I do?
I know the wget command but I think it for a single file and of course can't get php files so I think in ftp client application.
I'm having a problem connecting to SSH/Shell on my server. I get the Login Prompt, but when i enter the User/Pass i just get "SSH-2.0-OpenSSH_3.6.1p2", everything under that is blank.
I've restarted the SSH Server and made sure the account i was using was set to use Normal Shell (not jailed). What could be the problem?
I've purchased a NL Master reseller (about to purchase one in the US) and then a small VPS to see what more I could do, after transferring my site over to the VPS from the NL server I thought I'd come up with the idea with selling master reseller accounts, (both from NL and US master reseller services) the reason I came up with is because the VPS isn't to large to really do anything but seems perfect to keep a database, payment portal, WHMCS, my site, and hopefully all of my client information. What i want to do is somehow connect all 3 together so that when i do create a new client in LxAdmin I can select witch server I want to create it on and what package/permissions and what not, all from the VPS.
Example: LxAdmin -> create client -> fills out form basically similar that to the one in WHM
Resellers/VPS run CentOS Linux
WHM: 11.24.2
cPanel: 11.24.4-R35075
CENTOS 5.2 i686 virtuozzo
So basic question, is all this possible ? this including domains/email/ftp/ect.
I got HYPERVM Dedicated Server, i have create a VPS on it with LxAdmin Panel
But i am not able to reach to the domain added on LxAdmin panel,
1) Name Servers are setup correctly at registrar
2) DNS have been setup properly
I can even ping
ping mydomain.com -t
And it leaves ping to my server IP
THE PROBLEM is Port 80 is closed in VPS
Here is screenshot from HYPERVM of VPS panel where is shows port 80 is down
[url]
I even tried this command -
telnet mydomain.com 80
Connecting To mydomain.com...Could not open connection to the host, on
port 80: Connect failed
My Server Hosting provider is not willing to help me in this regards.
how can i open PORT 80?
I have a hosting company and maybe for my level this is a stupid question.
Well i have a server that have full up to 70%.
I order a new server,but how i will connect it with the first server which my company domain is there?
For example,clients which will go to server 2,and change the dns of their domains to ns1.mycompany.com and ns2.mycompany.com(which host in the 1 server)how will running up?
what i must do?
May i have to register ns3.mycompany.com and ns4.mycompany.com with the ips of the new server?
i have a windows shared hosting with Go-daddy, created the database and all is fine, but not sure about the DB name.
the name of the Database Host? is it local host?
shall i add any suffix to the DB name?
When traffic to my website gets heavy, connecting to the server really slows down. But, when connected, the site loads very fast and smooth. So why does it take like 4-12 seconds to connect to my server when traffic is heavy, and once connected it runs fast and smooth? I run Apache 2.2.3 on Debian 4. HostnameLookups is set to OFF. I have turned off all of the modules that I don't need, too. It also has MySQL 5.0 installed and is being used.
View 10 Replies View RelatedI have two servers (one for apache and one for SQL) where both are in the same DC. I looked at the BW graph and saw that the SQL server has pulled approx 4TB BW on the internet the last 30 days.
Since both are in the same DC, it would be better to run it via the network since it has free lan traffic compared to wasting a lot of "internet BW".
I'm currently using sqlservername.domain.com in the SQL connection string, but when I tried with the IP, the php script stalls for 30 seconds and then reports: "Can't connect to MySQL server on 'hostname' (4)".
Could this be a iptables issue? I also tried to add the apache IP in the "Additional MySQL Access Hosts" from cPanel, but that didn't help much.
Servers:
Apache - 10.1.0.xxx
SQL - 10.1.1.xxx
If I'm not mistaken, if the subnet isn't set to 255.255.255.0, both servers should be within range.
I desperately need someone to help with a tomcat installation on a dedicated server. I have tomcat working properly but the app is not connecting properly to the database.
View 1 Replies View RelatedI have Mysql installed on my Home server with Java server, and I have php WEB site hosted with Let's say Godaddy or whatever. I need to connect this WEB to my MYSQL. How can i do that?
View 6 Replies View RelatedI'm facing some odd issues with 2 servers located in the same datacenter.
One server is the HTTP server, and every 5 minutes it works, then for 5 minutes Server One and Server Two (MySQL) hate each other and refuse to talk to each other. Not only can neither not connect to each others MySQL, but also neither can ping each other.
The odd thing is, Server Three can however connect to the Server Two MySQL with no problems during this period. It seems to be just the communication between Server One and Server Two that keeps getting halted.
I've tried "service iptables stop" to disable the firewall, and changing SELinux to disabled, but neither have fixed it.
Some accounts on cpanel were suspended then when reactivated the databases didnt connect for some time.
All sites apart from one came back up but one database was corrupted and had to be restored but now the site isnt connecting to it.
whether it is possible for Procmail to filter based on the IP address of the host from which a message was received. In context, I want to reject any messages that come from hosts other than a specific list.
Is this possible? Search for the absence of particular IP addresses in received headers or something?
is it possible to have one "recipe" acting on behalf of all mail received for a domain name, or must it be per-user?
Is anyone experiencing any difficulties connecting to a server in FastServer's Cedar Falls data center?
We have a customer who cannot connect to his sites. He's confirmed at least a few other people are having difficulty as well. I have no problem, and I've used a few third party sites to ping the server on which he's being hosted.
Could a few of you please try to ping 64.38.7.202 and see if you get through? If not, could you tell me what ISP you're using? I believe there's a transit issue somewhere, and I'm hoping I can narrow it down (bonus if we can narrow it down to a single ISP!)
I have this problem with MySQL
Quote:
Error while connecting to MySQL. Failover enacted.
MySQL is Running and Working, how i can fix this problem?
So, let me start off by saying I am completely new to website and FTP server hosting. I've hosted game servers in the past so I know about port forwarding and the like but this is obviously a step-up. I've managed to get a fully-functioning FTP server that works great on the domain I'm using but the website using Apache just gives people a blank white screen (as stated in the description). I'm using port 55567 for the website as I don't know want to use 80 because of security risks and what not. The domain being used is delawaretexasrepository.t28.net. Below are the error.log, httpd.conf and httpd-vhosts.conf.
httpd-vhosts.conf: [URL] ....
httpd.conf: [URL] ....
error.log: [URL] ....