Upgrading To Php5 With Plesk
May 5, 2008i have just got a virtuzzo vps it have 512 mb ram, its comes with, centos 4.4, plesk 8.2
php 4.4, apache 2.05, so i want to upgrade, to, php5, apache 2.57
ADVERTISEMENT
Just Broke My Box..upgrading PHP5/Apache On Plesk
Dec 1, 2007I just ran a simple yum update php on the server, because I need to be running 5.2 instead of 5.1.6
The update went smoothly, so I restarted httpd, and all hell broke loose. Apache can't start because of a whole lot of missing modules. So I commented out every single LoadModule line to see if that would get it to start, and it started complaining about the configuration file of some other software being incorrect (because that configuration file pointed to some module that no longer exists)
At one point I was able to get apache to start, I believe by copying my old configuration file to httpd.conf and then commenting out some lines that it was complaining about. Apache started, but no pages were loading.
So right now, basically, I've got no web service running at all on the server. I really didn't expect all of these problems for a simple PHP update, but obviously I was mistaken.
Is it worth trying to fix this myself (intermediate linux user here) or would it just be easier to hire someone to come in and do it for me?
Upgrading Php4 To Php5
May 4, 2008I have a client who is currently running their own linux machine and has php4 installed (mad I know ) Anyways, I have been asked to make some scripts for them, however I am wanting to use php5 rather than php4 as that is what I am accustomed to not to mention it's still got support for it. Does anyone know of any good online resources on how to upgrade to php5? or better still, how to install php5 and run both 4 and 5 on the same server (using Apache)
View 5 Replies View RelatedUpgrading To Apache2/php5
Nov 5, 2007I would like upgrading to apache2.X and PHP5.x I have some question about that, can I find details how can I make upgrade without any problem, in cpanel (aptche upgrade ) what modules can I check it befor upgrading I don't know what need to check ?? is my sites working well without problem after upgrading?
View 8 Replies View RelatedConflicts Upgrading From Php4 To Php5
Apr 8, 2009My server currently has php 4.4.7 installed. I was wondering what potential issues (if any) there might be upgrading to 5.2.9?
Is there anything that might break code written for php4? (other than predefined functions with identical names)
Plesk 11.x / Linux :: Php5.4 On Subdomain Won't Work?
Nov 18, 2014I trying to setup php5.4 on a Plesk 11.0.9 server using this guide:
[URL]
It works without problems but I can't get it to work on a subdomain.
As far as I know, the only difference should be the path in the vhost.conf. I changed that to match the path to the subdomain, restarted apache but it still won't start php5.4
Upgrading Php On Linux Plesk
Feb 25, 2008Anyone know of a good tutorial for upgrading php on a linux plesk 8.3.0?
View 4 Replies View RelatedUpgrading Without Affecting Plesk
Mar 25, 2007I just obtained a root server which is running plesk 8.0.1. At present the server runs:
php 5.0
mysql 4
apache 2
FC2
I want to upgrade to at least php 5.2, and MySQL 5. However I'm affraid this may break Plesk? I heard MySQL 5 is only supported by Pleask 8.1 or above?
If I go ahead with this decision, is there anything I should be aware of? Can anyone advise of any procedure I should follow to make things simple and minimise conflicts such as Plesk integration etc.
Also a slightly different note I have come accross atomicrocketturtle. Can anyone explain what this is about?
Plesk 11.x / Linux :: Upgrading PHP From 5.4.4 To 5.4.9
Sep 1, 2014My Plesk installation (on Debian Wheezy) has PHP5.4.4 and I need to upgrade it to 5.4.9 or above.
How can I do this (It's a self managed Plesk server)?
Upgrading Php & MySQL On A Plesk Win2K3 Server
Jul 14, 2008I have a Win2003 dedicated server (with The Planet) that i use to host a large IPB forum site.
I got it about 3yrs ago and as I was a complete newbie to server management I got Plesk CP installed so that it would take care of all the SQL, PHP and mail installation and setup in one easy go.
I've since found Plesk for Windows to be a complete waste of space.. but it's still on there and has never been upgraded. I don't actually use it as a CP.
Similarly PHP and mySQL have never been upgraded.
Now I've got to the stage where, to upgrade the IPB forum software, I need to upgrade PHP and mySQL.. but looking at the installation, they seem to be embedded in the Plesk installation. They're inside the SWSoft/Plesk/ folders and none of the ini or config files appear to be in the places you'd expect them to be.
My question -
Would these upgrades be simple?? A case of just running an update package?? Or is the fact that PHP/mySQL are embedded in Plesk mean that it'll all mess up?
I'm worried that a failed upgrade will knacker the forum, which is why I've delayed for so long.
Plesk 11.x / Linux :: Upgrading Components Is No More Permitted
Oct 12, 2014OS: CentOS 6.4 (Final)
After upgrading components as suggested by "Tools&Settings->Plesk->Updates and Upgrades" item, components remained the previous version (PHP 5.3.3 and MySQL 5.1.73) as stated by phpinfo() result and by "Tools&Settings->Server Management->Server Components" list, though "Update Components" is no more permitted as if there is nothing more to update.
I need both PHP and MySQL servers updated in order to run Joomla 3.3.6.
Plesk 11.x / Linux :: After Upgrading To 11.5 Restore By CLI Is Not Working
Aug 3, 2013Yesterday we upgraded V.11 to V.11.5.30. And now we are not able to restore our backups anymore from our main server on our failover server by CLI (we have automated this with cronjobs and need the CLI backup/restore). We have a failover sulotion with two servers and restore the backups of our main server on our failover server!
If we try to create the map file on our failover server, we get the error:
The dump specification '/home/backups/plesk_partnerserver/dumps/backup_info_1308030132.xml' should be inside of dump directory '/home/backups/plesk/dumps'.
/home/backups/plesk_partnerserver/dumps is the path on our failoverserver where we store the backups of our main server and /home/backups/plesk/dumps ist the regular dump path of the failover server.
And if we try to restore the file without creating a map file on our failover server with /usr/local/psa/bin/pleskrestore --restore backup_info_1308030132.xml -level server: Unable to resolve all conflicts
What happend? Now after upgrading to 11.5 our backup- and failover-solutions are in big trouble!
Our OS is Debian Squeeze
PP is 11.5.30
Plesk 12.x / Linux :: 502 Bad Gateway Errors After Upgrading To 12.0.18
Aug 13, 2014Yesterday I've upgraded the server to Plesk 12.0.18. After the upgrade, a WHMCS install has stopped working.
The only error logs where I found errors is the proxy_error_log. It contains this kind of lines (for the 502 error):
2014/08/13 08:13:45 [error] 2918#0: *400 upstream prematurely closed connection while reading response header from upstream, client: XX.XX.XX.XX, server: XXXXXXX.COM, request: "GET /knowledgebase.php HTTP/1.1", upstream: "http://XX.XX.XX.XX:7080/knowledgebase.php", host: "xxxxxxxxx.com"
Plesk 12.x / Linux :: Upgrading Form Mysql 5.1.73 To 5.7
Aug 28, 2014I need to upgrade mysql from 5.1.73 to 5.7 but I have applications like lms, cms, and websites that runs with that version with no problems, my question is: Some of you had problems upgrading mysql, because i kwon plesk runs over mysql y i don't want to mess up with plesk.
View 1 Replies View RelatedHow To Install Mod_security, Suhosin, Mod_Evasive On Server Plesk (apache2, Php5)
Jul 26, 2007how to install mod_security, suhosin, Mod_Evasive on server plesk (apache2, php5)?
win I loacate apxs I have empty results
Plesk 12.x / Linux :: Allow PHP5 Json Decode Function In Chrooted Environment
Mar 4, 2015I'm Running Plesk 12 latest version. I've been partially followed that instructions to add php5 to a chrooted environment with success : [URL] .....
Code:
bash-4.3$ php --version
PHP 5.5.9-1ubuntu4.5 (cli) (built: Oct 29 2014 11:59:10)
Copyright (c) 1997-2014 The PHP Group
Zend Engine v2.5.0, Copyright (c) 1998-2014 Zend Technologies
This is how i did it, as root user :
Code:
./chroot_update.sh --add /usr/lib/php5
mkdir /var/www/vhosts/chroot/usr/share
cp -a /usr/share/zoneinfo /var/www/vhosts/chroot/usr/share
php -i | grep extension_dir
# returns : /usr/lib/php5/20121212/
[Code] .....
Plesk 12.x / Linux :: No Output For Command Mailq After Upgrading To 12.0.18
Apr 2, 2015We have a plesk server running on a Ubuntu 14.04.2 LTS machine. We check the state of the mailqueue with nagios, executing the "mailq" command. After the AutoInstaller upgraded our installation from 12.0.18 update 38 to 39, we noticed, that the nagios check failed.
After investigating a little bit, it seems that we found the problem:
When I enter "mailq" in the shell, the command is executed and gives me an proper output. But when I try to execute the command with its full path "/usr/bin/mailq" nothing happens, and I have to cancel with [ctrl]+[c]. The which-command delivers exactly the same path as written above...
Plesk 12.x / Linux :: Upgrading Phpbb Breaks Installation
Jan 12, 2015I am running phpbb 3.0.12 installed from Plesk. In Plesk it is showing me that there is an upgrade available to version 3.1.2-15 however when I Re-Check the version in phpbb it says that I already have the latest version 3.0.12. That's a little weird.
The problem is when I upgrade to 3.1.2-15 in Plesk, it will mess with the whole installation. The forum page will redirect in circles to /install/index.php which doesn't even exist and I can't do anything except revert to before the upgrade.
So my questions are: Why does Plesk show a version 3.1.2-15 but phpbb says the latest one is 3.0.12? How does the upgrade process from Plesk work? I expect it to automatically do everything, or why else would I want to let Plesk upgrade?
Plesk 11.x / Linux :: All Site Showing Default Page After Upgrading From 10.4.4 To 11.0.9
Jul 14, 2012I upgraded from 10.4.4 to 11.0.9 and saw no errors in the process, everything was fine. However when I checked the sites after, all of them (including sub-domains) were showing the default domain page. All the files are still there no problem, and as a test I deleted a subdomain a recreated it and it worked fine.
I have a feeling it's something to do with IP addresses (I currently have two set up - most sites use one and about only 5 use the other) as going to the subscription and changing the IP address over to the other one then back to the original seems to make the site show up for most sites. I can't do this on all sites though - any commands to reconfigure everything and get it all back in to place?
Plesk 12.x / Linux :: Sw-engine Fails To Start After Upgrading Debian?
Jan 13, 2015sw-engine fails to start with the following message:
system is debian 7.0.7 with Plesk 12.0.18 I have the problem on two servers, it started after upgrading debian
/usr/bin/sw-engine: error while loading shared libraries: libruntime.so.1: cannot open shared object file: No such file or directory
Plesk 11.x / Linux :: Constant Unable To Connect To Database While Upgrading / Repairing
Aug 11, 2014I had Plesk 10 installed on my openSUSE system (was a low version, maybe 11 or less) and then decided to upgrade to 11.5. So I did distribution upgrades to openSUSE 12.3 and everything went smoothly, except for some services like mysql and php. So I used Plesk autoinstaller to fix the php error and edited an outdated line in mysql configuration and both services ran smoothly!
Then I downloaded Plesk autoinstaller and ran the autoinstaller, but was surprised by this error message:
===> Checking for previous installation ... found.
ERR (3) [panel]: Error during product key mode determination, details: Unable to connect to database: ; trace: #0 /usr/local/psa/admin/plib/functions.php(2821): isPpaKeyRequired()
#1 /usr/local/psa/admin/plib/common_func.php3(11): require_once('/usr/local/psa/...')
#2 /usr/local/psa/admin/plib/api-common/cu.php(5): require_once('/usr/local/psa/...')
#3 /usr/local/psa/admin/sbin/httpdmng(8): include_once('/usr/local/psa/...')
#4 (main)
Unable to connect to database:
- My MySQL version is: 5.5.33 openSUSE package
- I did run mysql_upgrade with my admin username and password (password from: /etc/psa/.psa.shadow) and it worked successfully and fixed all of the errors, I did so after running the auto installer first, but then ran the installer again and the problem was still there
- I can access my web page, but it still doesn't connect to MySQL either.
I believe this is a problem with MySQL, but how can I make sure or detect what exactly the problem is
Plesk 12.x / Linux :: CentOS 6 - After Upgrading From V11 To V12 - File Not Found In Central Frame
Jul 1, 2014After upgrading from V11 to V12 : file not found in the central Frame
After upgrading from V11 to V12 version, I enter my credentials to login and when I get the main page, I have in the main frame : "File not found". : See screenshot
Plesk 12.x / Linux :: Loose Mailbox Size Policy Doesn't Work After Upgrading?
Jul 24, 2014Today I upgraded to Plesk 12 and during the day I got several customers that had problems with their mailbox size. According to Plesk they were exceeding the size, but they've been doing that for years. The setting that these limits don't have any real meaning is ignored after the upgrade...
View 1 Replies View RelatedPHP5 Into My IIS Server
Jan 1, 2009I have just installed PHP5 into my IIS server and want to install projectpier
1st problem: When I go to [url]I get the errorThis Virtual Directory does not allow contents to be listed.
There is an index.php in there but doesn't load even though I have specified it as a default content page in the website..
2nd problem: After I manually browse to the install page I get the following errors:
#Error: /config/config.php is not writable
# Error: /public/files is not writable
# Error: /cache is not writable
# Error: /upload is not writable
I have realised that permissions are not setup right so I went and gave cart blanche access to the folder for any user..it worked but is far from secure.What is the best way to do this?
When installing web applications like this are they usually done from the servers browser where the server is the only one with full access.I tried this and it didn't work.
Apt-get Php5 Or From Source
Jan 20, 2008Running ubuntu server 6 if I apt-get php5 the version I get is 5.1.2.
Now the latest version on the php.net site is 5.2.5.
Does it really make much of a difference if I'm slightly below current? What are your thoughts please?
I know if I go compiling from source php and mysql are difficult to get working together which is why I like the apt-get method.
Can We Run Both PHP4 And PHP5 Together
Jul 27, 2008We have a client which site requires PHP4, not PHP5 to run. Can we run both PHP versions alongside each other? Apparently, their site will only work in PHP4. We are running Plesk 8.3.0 for Linux.
View 8 Replies View RelatedCurl & GD On PHP5.2.5
Apr 12, 2008I have PHP 5.2.5 compiled with GD library working on my webserver,
yesterday i wanted to add Curl Support, so i had to recompile php.
I downloaded and installed Curl latest version and tried to recompile PHP :
'./configure'
'--prefix=/usr/local/php'
'--enable-discard-path'
'--disable-force-cgi-redirect'
'--enable-shared'
'--disable-static'
'--disable-debug'
'--disable-rpath'
'--enable-pic'
'--enable-inline-optimization'
'--enable-memory-limit'
'--with-gd'
'--with-png-dir'
'--with-jpeg-dir'
'--with-config-file-path=/etc'
'--with-config-file-scan-dir=/etc/php'
'--with-pear=/usr/share/pear'
'--enable-magic-quotes'
'--enable-debugger'
'--enable-track-vars'
'--with-exec-dir=/usr/bin'
'--with-versioning'
'--with-mod_charset'
'--with-regex=php'
'--enable-track-vars'
'--enable-trans-sid'
'--enable-safe-mode'
'--enable-ctype'
'--enable-ftp'
'--with-gettext=/usr'
'--enable-posix'
'--enable-session'
'--enable-sysvsem'
'--enable-sysvshm'
'--with-openssl=/usr'
'--without-kerberos'
'--with-freetype-dir=/usr'
'--with-zlib=/usr'
'--with-zlib=/usr'
'--with-zlib-dir=/usr'
'--with-zlib-dir'
'--enable-xslt'
'--with-xslt-sablot'
'--with-iconv-dir=/usr/local/lib'
'--with-mysql-sock=/var/lib/mysql/mysql.sock'
'--with-mysql'
'--enable-mbstring=all'
'--enable-fastcgi'
'--enable-discard-path'
'--enable-force-cgi-redirect'
'--with-curl=/usr/local/curl'
I can't get it working, this is the error i get :
..
checking for T1lib support... no
checking whether to enable truetype string function in GD... no
checking whether to enable JIS-mapped Japanese font support in GD... no
checking for fabsf... yes
checking for floorf... yes
If configure fails try --with-jpeg-dir=<DIR>
checking for png_write_image in -lpng... yes
If configure fails try --with-xpm-dir=<DIR>
If configure fails try --with-freetype-dir=<DIR>
configure: error: GD build test failed. Please check the config.log for
details.
I think i'm not the only one who is experiencing this problem, take a look here:
[url]
Why do PHP.net don't give much importance to this BUG?
I'm using the same OS : Centos 5
Installing Php5
Mar 27, 2008I recently installed ubuntu 7.10, and apache2. Both installed with no problems. In my browser i am able to type localhost, and i recieve the "It works" page. I can also start,stop and restart with no problems. However, I cannot install php5. I use synaptic package manager to install, and i added the appropriate lines to the httpd.conf file but i still cannot view .php files. I try to run a simple php page and a dialog box pops up prompting me to open or save the file. If i choose either, the box just pops up again.
View 15 Replies View RelatedUninstall PHP5
Jan 31, 2008I compiled php5 from source, i'm running php5+lighttpd using fastcgi..
i want to uninstall php5 and install php4, i tried this :
[root@srvxx php-5.2.5]# make uninstall
make: *** No rule to make target `uninstall'. Stop.
anyone knows how to uninstall PHP5?
(phpsuexec) How Can I Run Php5
Mar 31, 2008i have a server run with phpsuexec and php4 default,
i want to let certain account run with php5,
it looks likely i can add a php.ini in the account,
PHP5 Hosts
Jan 27, 2007I'm trying to keep up with things by developing for PHP5. My current host still uses PHP 4.4.1, which is a pain. Can someone advise me if I should change host to someone who uses PHP5. I would rather have shared hosting due to budget. If so, who should I use? Otherwise, can someone point me in the direction of a resource that describes how to develop for PHP5 while retaining backward compatibility for PHP4.x so I can write code targeted primarily at PHP5, but also works on PHP4.x?
View 6 Replies View Related