Non Standard And Excotic Letters Not Displayed Correctly
May 3, 2007
I just finished installing a new webserver :
debian 4 , 2.6.18-4-686 , PHP Version 4.4.4-8+etch2 , Apache 2.0
Everything is working fine, except that a lot of excotic letters and symbols on the site are not displayed correctly. Most of the special letters in Swedish, Russian or Polish are replaced by a '?' or a small square. It is a serverside problem, as the same texts are displayed correctly on another, older webserver.
I assume it has something to do with a character set or font that I need to install. But I don't know the exact name of this option, so searching on google doesnt give much relevant results.
View 1 Replies
ADVERTISEMENT
Sep 12, 2007
I have an oddball problem here that I haven't seen.
When you visit domain.com, characters are displayed like the files are not being properly read. However, when you visit domain.com/index.php all works fine. I thought this would be an .htaccess issue and tried simply removing it, but this doesn't fix the issue. I checked httpd.conf and all looks fine there too.
View 14 Replies
View Related
Feb 18, 2008
I am having a win 2003 server with a static ip and i have hosted 2 web sites in the iis server but no images are been displayed is it something to do with the designing of the site or some problem in my hosting,
View 4 Replies
View Related
Jul 14, 2007
Recently installed apache + php and such a move over this large site.
However any files that end with the .rar extension are shown in the browser instead of being displayed as a download.
Is there something i need to add to apache to force it to make .rar files be downloaded instead of displayed in the browser as jumbled text and symbols.
*I think im just have a memory block and can't remember how i have fixed this before*
View 1 Replies
View Related
Jun 13, 2009
I have a server with serverboost.nl and my site is not reachable via some networks. We have done a both way tracert and it fails after few steps. I am not sure how many networks give this error but I have already received few complaints from regular visitors to the site.
1. Who/ what networks should I contact to resolve this issue? I ave already asked ServerBoost.nl and they said TRACERT fails at Cogent network.
2.Cogent replied saying the following
"Thank you for the trace example. What you were seeing was the 1st and last hop on the Cogent network mpd01.iad01. The very next hop then transfers over to the Savvis network. I have completed a successfully trace to the destination.
mpd01.iad01#trace
Target IP address: "MySiteIP"
Tracing the route to "MySiteIP"
1 savvis.iad01.atlas.cogentco.com (154.54.12.26) 0 msec <----- 1st hop of Savvis's network
ber1-ge-7-43.virginiaequinix.savvis.net (208.173.10.181) 0msec
ber1-ge-7-39.virginiaequinix.savvis.net (208.173.52.105) 0msec
2 cr1-tengig0-7-2-0.washington.savvis.net (204.70.197.242) [AS 3561] 0 msec 4 msec 0 msec
3 dcr2-so-0-0-0.amsterdamamx.savvis.net (204.70.194.122) [AS 3561] 96 msec 96 msec 100 msec
4 acr2-so-0-0-0.Amsterdamamx.savvis.net (204.70.193.149) [AS 3561] 96 msec 96 msec 96 msec
5 so-0-1-0.br3.ams.we-dare.net (208.174.49.170) [AS 3561] 100 msec 100 msec 96 msec
6 ge-1-1-0.br1.ams.we-dare.net (84.244.188.249) [AS 20495] 96 msec 96 msec 96 msec
7 ge-1-1-0.cr1.rtd.we-dare.net (217.148.164.3) [AS 20495] 100 msec 104 msec 104 msec
8 "MySiteIP" 100 msec 100 msec 96 msec
mpd01.iad01#
Thank you,
Kenneth Abernethy
Customer Support Engineer"
3. TRACERT from Visitor to My Site and vise versa
Tracing route to MySite.com ["MySiteIP"] (from client IP "ClientIP")
over a maximum of 30 hops:
1 1 ms 1 ms 2 ms 192.168.1.1
2 9 ms 9 ms 9 ms 10.35.180.1
3 10 ms 7 ms 10 ms vl-201.gw03.ktgc.phub.net.cable.rogers.com [66.185.90.49]
4 22 ms 7 ms 7 ms gi-3-0.gw01.ktgc.phub.net.cable.rogers.com [66.185.81.121]
5 15 ms 13 ms 14 ms 64.71.241.93
6 25 ms 27 ms 27 ms 69.63.248.42
7 46 ms 74 ms 179 ms te1-5.mpd01.iad01.atlas.cogentco.com [154.54.12.89]
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
Tracert from server [MySiteIP] to client [ClientIP]
==============================
/root$ tracert "VisitorIP"
traceroute to "VisitorIP" ("VisitorIP"), 30 hops max, 40 byte packets
1 213.163.91.1 (213.163.91.1) 0.559 ms 0.833 ms 1.117 ms
2 10ge-3-1-0.br1.ams.we-dare.net (217.148.164.1) 1.353 ms 1.356 ms 1.507 ms
3 ge-0-3-0.br3.ams.we-dare.net (84.244.188.250) 1.749 ms 1.761 ms 1.840 ms
4 acr2-so-5-0-0.amsterdamamx.savvis.net (208.174.49.169) 1.744 ms 1.750 ms 1.827 ms
5 acr1-so-6-0-0.amsterdamamx.savvis.net (204.70.192.157) 1.732 ms 1.814 ms 1.938 ms
6 * * *
7 * * *
8 * * *
9 * * *
10 * * *
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
View 2 Replies
View Related
May 21, 2013
I am using Apache 2.4.1 (Win64), PHP 5.3.10 on Microsoft Windows 2008 server. I have also installed Microsoft VC++ 2010 (64 bit). I successfully configured mod_fcgid 2.3.7 as per the instructions. This was confirmed by running info php page. But when I run FastCGI test scripts, the output is displayed in text form and not in html format.
View 1 Replies
View Related
Jan 17, 2015
Adding simple subdomain in plesk panel hosted on windows 2012, but browsing the subdomain returning:
This page can’t be displayed....
View 4 Replies
View Related
Dec 2, 2014
I have a Plesk 11.5 server that someone made changes to in IIS to allow web site users to turn the sending of detailed error messages on and off from a web.config file. Unfortunately now none of the sites will send detailed error messages to the browser no matter what is done. The person that made the changes to IIS did not document them properly and cannot tell me what exactly they changed. None of the obvious settings have made an effect on the problem.
View 1 Replies
View Related
Apr 17, 2014
I have this error.
HTML:
<?xml version="1.0" encoding="UTF-8"?>
<!--
For more information on how to configure your ASP.NET application, please visit
http://go.microsoft.com/fwlink/?LinkId=169433
-->
<configuration>
<configSections>
[Code] ....
View 1 Replies
View Related
Nov 11, 2014
First of all I checked via command line if any software is not installed properly while plesk installation was done on destination server (windows server 2012 R2). All looks fine, please check attached file pleskinstallation.txt
Source plesk version 10.4.4 (windows server 2008)
Destination plesk version 12.0.18 MU#23 built.
We are in testing mode of migrating websites hosted with source plesk version 10.4.4 onto destination server plesk server 12.0.18 having (windows server 2012 R2).
What we did, we restored the backup of Source plesk version 10.4.4 (windows server 2008) to Destination plesk version 12.0.18 MU#23 built.
Now the problem is that backup which we restored on Destination plesk version 12.0.18 MU#23 was of 68 GB and now when we setup the backup on Destination plesk version 12.0.18 MU#23 and when backup completes successfully it show us wrong backup size up to 16 GB.
We have requested several times to plesk support has to check the entire new plesk version in terms of all feature (like taking backup, restoring, plesk installation etc) while releasing new version, If they have noticed bug than plesk support should not release new version or micro update until they are sure.
I would request them again to check backup size bug along with other bugs.
1. "Stats crashing and not updating stats"
2. installing "Spam assassin" on Plesk 12.0.18 on windows server 2012 r2 and we are getting error:
Error: Unable to set Plesk SpamAssassin 3.3.2 as the default Spam Filter: defpackagemng failed: Execute spammng.exe --check failed with error code 1: Unable generate the unique file name by template D:Program Files (x86)ParallelsPleskAdditionalPerlsiteetcmailspamassassinlocal.cf[*].bak: directory D:Program Files (x86)ParallelsPleskAdditionalPerlsiteetcmailspamassassin does not exist.
View 1 Replies
View Related
Jan 28, 2008
I am being rejected by Hotmail when sending mail from my VPS. I want to send mails from punbb and OSCommerce, with various website hosted on one VPS/Cpanel/LAMP solution. And with sendmail or SMTP, it'a always the same : passing almost every ISP except Hotmail/Gmail. I also always get this part in my email header regardless of which website i'm sending email from :
Code:
Received: from host.locker4adream.com ([74.200.75.7])
by host.locker4adream.com with esmtpa (Exim 4.68)
So I think it's the host.locker4adream.com part that makes me rejected. Because it's almost the only line in the email header that is different when I am using Outlook/Thunderbird to send mail. This ip (74.200.75.7]) is mine and I never spammed or anything.
So i asked my host ro add rDNS. And I added this line to my DNS zone on my mail domain:
Code:
lockeradream TXT "v=spf1 mx a ptr ip4:74.200.75.7/32 ip4:74.200.81.156/32?all"
I am really out of solutions! Can anyone tell me if the SPF record stated above is ok?
View 1 Replies
View Related
Jan 15, 2007
I was checking this tutorial and thank the lord I did this all correct before I saw this thanks to all of you here on WHT (you all rock!) but right at the end of the tutorial it talks about setting up PTR dns... what exactly are they for? And are they needed?
[url]
Also does anyone know how to check/configure the reverse DNS settings?
View 3 Replies
View Related
Apr 26, 2008
I have just ran easyapache to update from 5.2.4 to 5.2.5 and selected suhosin.
I can see no evidence of it by viewing phpinfo scripts such as vbulletin's.
i should be able to see something like this yes?
[url]
and there is nothing new in php.ini other than:
Directory in which the loadable extensions (modules) reside.
extension_dir = "/usr/local/lib/php/extensions/no-debug-non-zts-20060613"
zend_extension="/usr/local/IonCube/ioncube_loader_lin_5.2.so"
zend_extension_ts="/usr/local/IonCube/ioncube_loader_lin_5.2_ts.so"
extension="suhosin.so"
Via SSH i get this
# php -v
PHP 5.2.5 (cli) (built: Apr 26 2008 06:45:31)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies
with the ionCube PHP Loader v3.1.32, Copyright (c) 2002-2007, by ionCube Ltd., and
with Zend Extension Manager v1.2.2, Copyright (c) 2003-2007, by Zend Technologies
with Suhosin v0.9.23, Copyright (c) 2007, by SektionEins GmbH
with Zend Optimizer v3.3.3, Copyright (c) 1998-2007, by Zend Technologies
# /usr/bin/php -v
PHP 5.2.5 (cgi) (built: Apr 26 2008 06:49:11)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies
with the ionCube PHP Loader v3.1.32, Copyright (c) 2002-2007, by ionCube Ltd., and
with Zend Extension Manager v1.2.2, Copyright (c) 2003-2007, by Zend Technologies
with Suhosin v0.9.23, Copyright (c) 2007, by SektionEins GmbH
with Zend Optimizer v3.3.3, Copyright (c) 1998-2007, by Zend Technologies
View 3 Replies
View Related
Nov 7, 2008
I am using version 2.14.5 of MRTG, it is old.
The old MRTG works correctly?
View 1 Replies
View Related
Aug 25, 2007
to run my mail through the main IP of my server, which has reverse DNS. At present my mail is running through an other IP address on the same server.
I need someone to show me hows to set it up correctly. My host has alerted me to the problem but their support doesn't include doing this kind of work.
I will pay someone who knows what they are doing, to do this work for me.
View 3 Replies
View Related
Apr 27, 2007
I've had this problem for a while. My HTTP will stop functioning, so I attempt to restart it via SSH. I restart it, yet it doesn't fix the problem. So I reboot the server via SSH. I wait 5-10 minutes and the server STILL isnt up. Can't login via SSH or anything.
So every time I have to tell my host to manually reboot the server. I've had apache recompiled multiple times, but I don't think that's the issue.
View 1 Replies
View Related
May 28, 2009
I had a small question about ODBC. I created a new connection to a MySQL database with the 'ODBC Data Source Administrator' on my Win 2008 / IIS 7 webserver.
In this administration panel the ODBC data source works just fine. When I fill in the required values I receive the list of available databases and pressing the "test" button results in a successful connection.
But when I want to use this connection in other software, a C++ application and a PHP application, they supply me with errors "Couldn't connect to database", etc.
So the ODBC connection is correct (so are the credentials in the software 100% sure of that), but software can't use the connection. Because the software worked perfectly on an older server I think I'm missing out on some sort of setting which enables applications to use the connection (or something like that).
View 0 Replies
View Related
Jun 7, 2008
I have suPHP installed in FastCGI mode. PHP5 is my default installation but I have it setup so that PHP4 can also run. At least that is my intention.
I have PHP5 working without a problem.
PHP4 is loading if I add the directinf x-httpd-php4 .php into my .htaccess file.
HOWEVER: PHP (via phpinfo) is trying to load the config file from /usr/local/etc/php5/cgi/php.ini when it should be from ....php4/cgi/php.ini
Where do I go to fix this? Or is there a second directive that I need to load in the .htaccess file?
Also... In either php5 or php4, if I put a php.ini file into a directory, it is suppose to load that one. However, it is not doing this either.
View 9 Replies
View Related
Mar 14, 2008
I get this error with netdiag:
DNS test . . . . . . . . . . . . . : Failed
[WARNING] The DNS entries for this DC are not registered correctly on DNS se
rver 'DNS.FIRST.IP.HERE'. Please wait for 30 minutes for DNS server replication.
[WARNING] The DNS entries for this DC are not registered correctly on DNS se
rver 'DNS.SECOND.IP.HERE'. Please wait for 30 minutes for DNS server replication.
[FATAL] No DNS servers have the DNS records for this DC registered.
configuration:
Server is a DC/AD. It has 2 IP's, both are static of course. the DNS Servers are manually added into the network configuration properties, as these are provided by the hoster.
View 2 Replies
View Related
Dec 6, 2014
I am running a CentOS 6.6 (Final) with Plesk 12.0.18 Update #27 on my dedicated server. I was advised to upgrade my server to one that has a SSD due to better performance. What they failed to tell me was that I would need to perform additional configurations so that Plesk stores the subscription files in the /HDD-var/ directory and NOT the /SDD-var/ directory. Current server
Here are my questions:
1. How difficult would it be (I am a quick learner and can follow exact steps or directions very well) to make Plesk store the files on the HDD rather than the SDD?
2. Is this something I should undertake or is this very difficult to do?
3. If I perform these changes, will they revert to the old way if I perform Plesk updates? Or will the changes I make become permanent?
SSH: df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 4.0G 916M 3.1G 23% /
/dev/mapper/ssd-usr 3.9G 1.9G 1.8G 51% /usr
/dev/mapper/ssd-var 3.9G 3.7G 2.7M 100% /var (Plesk is storing data here)
/dev/mapper/ssd-home 3.9G 792M 2.9G 22% /home (Would also like this data to be on the HDD)
[Code] ....
View 3 Replies
View Related
Sep 11, 2008
I got new server for free image hosting services, I was reading up about lite speed and it seems faster for this type of need however i do not have money to buy enterprise edition now, standard edition which is free but it says only 150 concurrent connection, means i can't have more than 150 ppl viewing a image? please advice or do stick with our great Apache which free
View 8 Replies
View Related
Nov 19, 2008
Buying a dedicated server, what configuration would you expect to be as standard memory, hard drive, and raid?
And what would your budget be for this configuration? What do you expect to pay for it?
The CPU would be as the following:
Single CPU Quad Core Xeon 3220
Single CPU Quad Core Xeon 5430
Dual CPU Quad Core Xeon 5430
What standard configuration would you expect on these?
View 4 Replies
View Related
May 14, 2009
We are planing to implement a spam appliance like the mailfoundry for our 60 cpanel servers.
What is the best and easiest way to replace the standard cpanel mx entry in the dns zonefiles with our two new MX entries?
Additionaly we need to enable the option "Always accept mail locally even if the primary mx does not point to this server." for all the dnszonefiles where we use the new MX entries.
The problem is, that some customers are using already own mx entries, therefore we can not change all of them, but only the entries which point to the cpanel server.
Does someone have a script for this, or how would you change this?
View 2 Replies
View Related
Oct 2, 2013
Yesterday i was putting a website to manage in localhost but i had to abilitate the usage of mod_rewrite. when i'm in the index and i try to open links i have this message..The requested URL /c3click.php was not found on this server.Here are the steps that i followed:
1) Search for LoadModule ReWrite and decommenting
2) Search for Servername localhost
<Directory />
AllowOverride all
Require all granted
</Directory>
3) Search for C:/wamp/www
Options all
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
#
AllowOverride all
#
# Controls who can get stuff from this server.
#
# Require all granted
# onlineoffline tag - don't remove
Order Deny,Allow
Allow from all
Allow from 127.0.0.1
Allow from ::1
Allow from localhost
4) Reboot the server
In the beginning of my .htaccess file there's written
RewriteEngine On
RewriteBase /
Options -Multiviews
My configuration is Windows 7, Apache 2.4.4 on Wamp Server 64bit.
In the apache_error.log file i discovered this
[Wed Oct 02 10:33:47.582049 2013] [:error] [pid 2412:tid 1496] [client 127.0.0.1:50195] script 'C:/wamp/www/c3click.php' not found or unable to stat, referer: http://localhost/Lavoro/C3click/01-10-2013_Sito/
View 1 Replies
View Related
Jul 1, 2014
Microsoft Windows Server 2012 Panel version 11.5.30 Update #47
The Webadmin app does not install all the folders it needs to run correctly. I have downloaded and repaired the install as noted in [URL] ..... This did not repair the install. All the folders that are needed in the application directory in the vhosts folder are still missing. I have attached the install log.
View 1 Replies
View Related
Aug 23, 2014
When I modify rules using the firewall panel it is not generating rules correctly when selecting allow from selected sources deny from others.
View 2 Replies
View Related
Nov 25, 2014
I have domainA and domainB. domainA hosting files, for security ALL browser access should denied.. EXCEPT domainB make in php call with readfile() to a file on domainA. This should allowed.
domainB => readfile(http://domainA/myfile) => allowed ... all other access should denied.
So I set in vhost of domainA this:
<DirectoryMatch "^/var/www/vhosts/domainA/httpdocs/folder/">
Order deny,allow
Deny from all
Allow from 127
Allow from server-ipv4
Allow from server-ipv6/128
Allow from ::1/128
</DirectoryMatch>Click to expand...
View 3 Replies
View Related
Oct 19, 2008
I'm sure there is an easy answer to this, and i'm probably being a little lazy, but the google searches i did didn't really help.
As I need to have windows hosting, apart from the price, is there any difference between setting up the server with windows 2003 standard edition and web edition?
I want to run MS SQL and My sql databases, run asp, .Net 2 and php on the server.
I'd also want to connect with RDP which i'm assuming is fine.
Most of the searches seem to talk about the fact that you can't set up active directory,or making it a domain controller but not much else.
View 2 Replies
View Related
