Plesk 11.x / Windows :: Detailed Error Messages Not Being Displayed
Dec 2, 2014
I have a Plesk 11.5 server that someone made changes to in IIS to allow web site users to turn the sending of detailed error messages on and off from a web.config file. Unfortunately now none of the sites will send detailed error messages to the browser no matter what is done. The person that made the changes to IIS did not document them properly and cannot tell me what exactly they changed. None of the obvious settings have made an effect on the problem.
HTML: <?xml version="1.0" encoding="UTF-8"?> <!-- For more information on how to configure your ASP.NET application, please visit http://go.microsoft.com/fwlink/?LinkId=169433 --> <configuration> <configSections>
First of all I checked via command line if any software is not installed properly while plesk installation was done on destination server (windows server 2012 R2). All looks fine, please check attached file pleskinstallation.txt
Source plesk version 10.4.4 (windows server 2008) Destination plesk version 12.0.18 MU#23 built.
We are in testing mode of migrating websites hosted with source plesk version 10.4.4 onto destination server plesk server 12.0.18 having (windows server 2012 R2).
What we did, we restored the backup of Source plesk version 10.4.4 (windows server 2008) to Destination plesk version 12.0.18 MU#23 built.
Now the problem is that backup which we restored on Destination plesk version 12.0.18 MU#23 was of 68 GB and now when we setup the backup on Destination plesk version 12.0.18 MU#23 and when backup completes successfully it show us wrong backup size up to 16 GB.
We have requested several times to plesk support has to check the entire new plesk version in terms of all feature (like taking backup, restoring, plesk installation etc) while releasing new version, If they have noticed bug than plesk support should not release new version or micro update until they are sure.
I would request them again to check backup size bug along with other bugs.
1. "Stats crashing and not updating stats"
2. installing "Spam assassin" on Plesk 12.0.18 on windows server 2012 r2 and we are getting error:
Error: Unable to set Plesk SpamAssassin 3.3.2 as the default Spam Filter: defpackagemng failed: Execute spammng.exe --check failed with error code 1: Unable generate the unique file name by template D:Program Files (x86)ParallelsPleskAdditionalPerlsiteetcmailspamassassinlocal.cf[*].bak: directory D:Program Files (x86)ParallelsPleskAdditionalPerlsiteetcmailspamassassin does not exist.
Mar 31 14:56:52 hosting plesk sendmail[1177]: _mh_fork(): Error occured during waiting the child process with pid: 1178: No child processes Mar 31 14:56:52 hosting plesk sendmail[1177]: Error during 'check-quota' handler Mar 31 14:56:52 hosting plesk sendmail[1177]: Unable to get sender domain by sender mailname
We have a reseler that wants his clients to receive the system warning and the account creation from a mail that he wants , not from the administrative mail that is default .
I run a website that uses a GoDaddy Virtual Private Server & Plesk. The website sends emails to alert users of various events. For the most part, this works but I occasionally capture the following error message:
Error in processing. The server response was: Requested action aborted: This mail account has sent too many messages in a short amount of time. Please try later.
Can the number of messages sent over X number of minutes be set via Plesk? If so, how?
We have just had reports of SPAM being sent from our CentOS 6.x server running Plesk 12.
Services like Plesk Premium antivirus, SpamAssasin, watchdog(rkhunter) and mod_security are enabled on the server to enhance security and none of these seemed to stop the scripts.
The issue is that multiple domains are sending out mail from this server, so it is difficult to find the script sending out SPAM. When we were running Plesk 11.0 we had a seperate log-file where we could see the file sending any mail going out from the postfix mailserver. I have check both /var/log/maillog and /usr/local/psa/var/log/maillog, but there is nothing in those files to tell me the file that sent the mail.
How would I go about finding this file from either the Plesk Control Panel or through SSH (using log-files)?
Does anyone know what the following events in /var/log/messages mean. It looks like some sort of failure on the ata bus. Does the last line mean that it successfully wrote all data using the cache, or could there be data loss?
The output of smartctl looks ok for the disk.
Code: Jul 26 16:44:35 server1 kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Jul 26 16:44:35 server1 kernel: ata1.00: cmd c8/00:08:9d:e2:8a/00:00:00:00:00/ec tag 0 cdb 0x0 data 4096 in Jul 26 16:44:35 server1 kernel: res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Jul 26 16:44:42 server1 kernel: ata1: port is slow to respond, please be patient (Status 0xd0) Jul 26 16:45:05 server1 kernel: ata1: port failed to respond (30 secs, Status 0xd0) Jul 26 16:45:05 server1 kernel: ata1: soft resetting port Jul 26 16:45:10 server1 kernel: ata1.00: revalidation failed (errno=-2) Jul 26 16:45:10 server1 kernel: ata1: failed to recover some devices, retrying in 5 secs Jul 26 16:45:15 server1 kernel: ata1: soft resetting port Jul 26 16:45:15 server1 kernel: ata1.00: configured for UDMA/133 Jul 26 16:45:15 server1 kernel: ata1: EH complete Jul 26 16:45:15 server1 kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) Jul 26 16:45:15 server1 kernel: SCSI device sda: drive cache: write back
I just ran 'rkhunter -c --quiet' and this is the error messages I got:
Line: Warning: This operating system is not fully supported! Line: Warning: This operating system is not fully supported! Warning: Cannot find md5_not_known Some errors has been found while checking. Please perform a manual check on this machine debian
Apache seems to have the port blocked. I removed my thumbdrive earlier after using XAMPP on it successfully that had it on it and went somewhere then came back & well all the sudden it will not work. I am getting the below error messages after I push the start button.
I am trying out Plesk 11 for windows, so far I like it and will most likely buy it. I am having a problem with a new domain, however. I just created the domain, and I installed wordpress on it using Plesk's application page. If I go to [URL] .... it will not load, however if I go to [URL] .... it loads just fine. I even edited the directory to make sure that IIS looks for index.php first, but this didn't fix it. What am I missing?
I have a fresh install of 11.5 on Windows Server 2008r2. I have setup a domain from a 9.5 backup. Everything _looks_ okay, php settings look fine, but php pages give the following with detailed error reporting:
HTTP Error 404.3 - Not Found
The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
Note that this happens whether I select php 5.2 or 5.4
My Server Details Panel version11.0.9 Update #61, last updated at May 5, 2014 12:52 AM Windows Server 2008 Service pack 1 64bit Intel Xeon 2.3 with 24GB Ram =======
For self diagnostic I delete all files on my root directory (C:Inetpubvhostsmydomainhttpdocs) and put only 2 files index.php and index.html
When I browse for index.html. It display properly. When I browse for index.php the error persist. What could be wrong?
I am new to Parallels software, more specifically Parallels Panels. I have installed a trial copy of the software on my Windows 2008 R2 SP1. This is a Dedicated machine with no other users on it. I presume installation of Panels was successful because I can log in and see the admin control panel. I created a customer with success. I am now trying to create a subscription using the default service plan. After entering all the appropriate info on the new subscription page and submitting it, a few moments later I receive the following error:
Error: Filename: ?C:Inetpubvhosts estyourwebhostingprosite.comhttpdocsweb.config Error: The configuration section 'system.webServer/rewrite/rules' cannot be read because it is missing a section declaration In module Exception type: System.Runtime.InteropServices.COMException at Microsoft.Web.Administration.Interop.AppHost
Trying to restore a database in plesk 11 I got the following error.
Error: dbbackup failed: Unable to restore database 'database_name'Could not load file or assembly 'Microsoft.SqlServer.ConnectionInfo, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
There is no wrong with the db, when I restore from it on local machine everything works.
I have a problem with restore ms sql server 2008 database after restoring the message...Error: Unable to creste database user: Database user name is invalid. Only latin letters are allowed in the database user nameerror
We are getting an error every time that i try to add a new IP on Plesk panel. I go to "Tool and settings" than "IP address", "Add ip address" on fields i already try to ip:
xx.xx.xx.xx/32 and xx.xx.xx.xx/submask
every time that i click on OK, the button become loading an never finish....
Every time a customer create a website with presence builder, after publish, he gets "Error 503, service is unavaliable" for it's site. We try to develop the website with another software, most like presence builder (PB), and upload the files to plesk. It works like haven. if we go back to PB, it gets the error.
Server: Virtualbox - windows 2008 STD - 3.5GB of memory, 50Gb of HDD (data only and 80% free), 50Gb of HDD for windows (40% free), 3 cores 3.5GHZ;
Host: windows 7 ultimate, 16GB of memory, 2x 500GB HDD raid 1 (data only - 80% free), 8core, 3.5GHZ.
My site is showing 500 internal server error. I use classic ASP. How to enable custom error on the server? I use Plesk 11. With Plesk 9.5, it will automatically show up on the server.
While attempting to migrate from previous version of Plesk Panel Windows to current (Windows 2012 R2 with Plesk Panel 12) version, following error appears which stops PMM to proceed further.
Error: [Errno 2] No such file or directory: 'C:ParallelsPleskPMM sessions20141117102120197capability_info'
This error is generated for all subscriptions which we are trying to migrate and above file can indeed be confirmed missing.
When I try to set a domain's hosting type from "Forwarding" to "Website hosting" I get the following error:
Error: Unable to start (/c ""C:Program Files (x86)ParallelsPleskadminbinusermng.exe" exist [username]") at Plesk impersonation(PipeServer::ServerThread::runAs line 886) at Unable to execute applicationzif_plesk_proc_open line 1274)
What I tried: - Using different usernames; - Checked plesksrv.exe permissions [URL] ;
And right now I'm running the PP Reconfigurator tool, option Plesk File Security, cause I think this issue is related with permissions.
