I was checking this tutorial and thank the lord I did this all correct before I saw this thanks to all of you here on WHT (you all rock!) but right at the end of the tutorial it talks about setting up PTR dns... what exactly are they for? And are they needed?
[url]
Also does anyone know how to check/configure the reverse DNS settings?
I'm trying to find a solution to an issue. I run a server which has a custom apache configuration where each hosted site requires about 10 custom ENV variables. Currently I'm manually configuring them but I'm moving the product to market and need a solution which integrates with modern bill such as cPanel to handle the provisioning and set up of the new sites. They will need to be generated with the custom variables right out of the gate. I have been told by the people at our server location that this is not possible with cpanel - that it has a structure which it uses to config new sites and in reading the docs at cPanel's site I can't find any reference to this type of requirement so I am wondering if that is correct.
Is anyone aware if A) My server co-lo people are incorrect or B) If there is another app which intefaces with modern bill which allows a greater level of flexibilty when a new site is created? Ideally I would like to trigger a shell script which would also do some initial db settup - I'm thinking that this has got to be doable just unsure where to look.
what's up with RapidSSL provisioning? EV1-Server/ThePlanet and namecheap are both reporting problems registering new RapidSSL certificates.
View 3 Replies View RelatedI am being rejected by Hotmail when sending mail from my VPS. I want to send mails from punbb and OSCommerce, with various website hosted on one VPS/Cpanel/LAMP solution. And with sendmail or SMTP, it'a always the same : passing almost every ISP except Hotmail/Gmail. I also always get this part in my email header regardless of which website i'm sending email from :
Code:
Received: from host.locker4adream.com ([74.200.75.7])
by host.locker4adream.com with esmtpa (Exim 4.68)
So I think it's the host.locker4adream.com part that makes me rejected. Because it's almost the only line in the email header that is different when I am using Outlook/Thunderbird to send mail. This ip (74.200.75.7]) is mine and I never spammed or anything.
So i asked my host ro add rDNS. And I added this line to my DNS zone on my mail domain:
Code:
lockeradream TXT "v=spf1 mx a ptr ip4:74.200.75.7/32 ip4:74.200.81.156/32?all"
I am really out of solutions! Can anyone tell me if the SPF record stated above is ok?
I have just ran easyapache to update from 5.2.4 to 5.2.5 and selected suhosin.
I can see no evidence of it by viewing phpinfo scripts such as vbulletin's.
i should be able to see something like this yes?
[url]
and there is nothing new in php.ini other than:
Directory in which the loadable extensions (modules) reside.
extension_dir = "/usr/local/lib/php/extensions/no-debug-non-zts-20060613"
zend_extension="/usr/local/IonCube/ioncube_loader_lin_5.2.so"
zend_extension_ts="/usr/local/IonCube/ioncube_loader_lin_5.2_ts.so"
extension="suhosin.so"
Via SSH i get this
# php -v
PHP 5.2.5 (cli) (built: Apr 26 2008 06:45:31)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies
with the ionCube PHP Loader v3.1.32, Copyright (c) 2002-2007, by ionCube Ltd., and
with Zend Extension Manager v1.2.2, Copyright (c) 2003-2007, by Zend Technologies
with Suhosin v0.9.23, Copyright (c) 2007, by SektionEins GmbH
with Zend Optimizer v3.3.3, Copyright (c) 1998-2007, by Zend Technologies
# /usr/bin/php -v
PHP 5.2.5 (cgi) (built: Apr 26 2008 06:49:11)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies
with the ionCube PHP Loader v3.1.32, Copyright (c) 2002-2007, by ionCube Ltd., and
with Zend Extension Manager v1.2.2, Copyright (c) 2003-2007, by Zend Technologies
with Suhosin v0.9.23, Copyright (c) 2007, by SektionEins GmbH
with Zend Optimizer v3.3.3, Copyright (c) 1998-2007, by Zend Technologies
I am using version 2.14.5 of MRTG, it is old.
The old MRTG works correctly?
to run my mail through the main IP of my server, which has reverse DNS. At present my mail is running through an other IP address on the same server.
I need someone to show me hows to set it up correctly. My host has alerted me to the problem but their support doesn't include doing this kind of work.
I will pay someone who knows what they are doing, to do this work for me.
I've had this problem for a while. My HTTP will stop functioning, so I attempt to restart it via SSH. I restart it, yet it doesn't fix the problem. So I reboot the server via SSH. I wait 5-10 minutes and the server STILL isnt up. Can't login via SSH or anything.
So every time I have to tell my host to manually reboot the server. I've had apache recompiled multiple times, but I don't think that's the issue.
I had a small question about ODBC. I created a new connection to a MySQL database with the 'ODBC Data Source Administrator' on my Win 2008 / IIS 7 webserver.
In this administration panel the ODBC data source works just fine. When I fill in the required values I receive the list of available databases and pressing the "test" button results in a successful connection.
But when I want to use this connection in other software, a C++ application and a PHP application, they supply me with errors "Couldn't connect to database", etc.
So the ODBC connection is correct (so are the credentials in the software 100% sure of that), but software can't use the connection. Because the software worked perfectly on an older server I think I'm missing out on some sort of setting which enables applications to use the connection (or something like that).
I have suPHP installed in FastCGI mode. PHP5 is my default installation but I have it setup so that PHP4 can also run. At least that is my intention.
I have PHP5 working without a problem.
PHP4 is loading if I add the directinf x-httpd-php4 .php into my .htaccess file.
HOWEVER: PHP (via phpinfo) is trying to load the config file from /usr/local/etc/php5/cgi/php.ini when it should be from ....php4/cgi/php.ini
Where do I go to fix this? Or is there a second directive that I need to load in the .htaccess file?
Also... In either php5 or php4, if I put a php.ini file into a directory, it is suppose to load that one. However, it is not doing this either.
I get this error with netdiag:
DNS test . . . . . . . . . . . . . : Failed
[WARNING] The DNS entries for this DC are not registered correctly on DNS se
rver 'DNS.FIRST.IP.HERE'. Please wait for 30 minutes for DNS server replication.
[WARNING] The DNS entries for this DC are not registered correctly on DNS se
rver 'DNS.SECOND.IP.HERE'. Please wait for 30 minutes for DNS server replication.
[FATAL] No DNS servers have the DNS records for this DC registered.
configuration:
Server is a DC/AD. It has 2 IP's, both are static of course. the DNS Servers are manually added into the network configuration properties, as these are provided by the hoster.
I am running a CentOS 6.6 (Final) with Plesk 12.0.18 Update #27 on my dedicated server. I was advised to upgrade my server to one that has a SSD due to better performance. What they failed to tell me was that I would need to perform additional configurations so that Plesk stores the subscription files in the /HDD-var/ directory and NOT the /SDD-var/ directory. Current server
Here are my questions:
1. How difficult would it be (I am a quick learner and can follow exact steps or directions very well) to make Plesk store the files on the HDD rather than the SDD?
2. Is this something I should undertake or is this very difficult to do?
3. If I perform these changes, will they revert to the old way if I perform Plesk updates? Or will the changes I make become permanent?
SSH: df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 4.0G 916M 3.1G 23% /
/dev/mapper/ssd-usr 3.9G 1.9G 1.8G 51% /usr
/dev/mapper/ssd-var 3.9G 3.7G 2.7M 100% /var (Plesk is storing data here)
/dev/mapper/ssd-home 3.9G 792M 2.9G 22% /home (Would also like this data to be on the HDD)
[Code] ....
We are planing to implement a spam appliance like the mailfoundry for our 60 cpanel servers.
What is the best and easiest way to replace the standard cpanel mx entry in the dns zonefiles with our two new MX entries?
Additionaly we need to enable the option "Always accept mail locally even if the primary mx does not point to this server." for all the dnszonefiles where we use the new MX entries.
The problem is, that some customers are using already own mx entries, therefore we can not change all of them, but only the entries which point to the cpanel server.
Does someone have a script for this, or how would you change this?
I just finished installing a new webserver :
debian 4 , 2.6.18-4-686 , PHP Version 4.4.4-8+etch2 , Apache 2.0
Everything is working fine, except that a lot of excotic letters and symbols on the site are not displayed correctly. Most of the special letters in Swedish, Russian or Polish are replaced by a '?' or a small square. It is a serverside problem, as the same texts are displayed correctly on another, older webserver.
I assume it has something to do with a character set or font that I need to install. But I don't know the exact name of this option, so searching on google doesnt give much relevant results.
Yesterday i was putting a website to manage in localhost but i had to abilitate the usage of mod_rewrite. when i'm in the index and i try to open links i have this message..The requested URL /c3click.php was not found on this server.Here are the steps that i followed:
1) Search for LoadModule ReWrite and decommenting
2) Search for Servername localhost
<Directory />
AllowOverride all
Require all granted
</Directory>
3) Search for C:/wamp/www
Options all
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
#
AllowOverride all
#
# Controls who can get stuff from this server.
#
# Require all granted
# onlineoffline tag - don't remove
Order Deny,Allow
Allow from all
Allow from 127.0.0.1
Allow from ::1
Allow from localhost
4) Reboot the server
In the beginning of my .htaccess file there's written
RewriteEngine On
RewriteBase /
Options -Multiviews
My configuration is Windows 7, Apache 2.4.4 on Wamp Server 64bit.
In the apache_error.log file i discovered this
[Wed Oct 02 10:33:47.582049 2013] [:error] [pid 2412:tid 1496] [client 127.0.0.1:50195] script 'C:/wamp/www/c3click.php' not found or unable to stat, referer: http://localhost/Lavoro/C3click/01-10-2013_Sito/
Microsoft Windows Server 2012 Panel version 11.5.30 Update #47
The Webadmin app does not install all the folders it needs to run correctly. I have downloaded and repaired the install as noted in [URL] ..... This did not repair the install. All the folders that are needed in the application directory in the vhosts folder are still missing. I have attached the install log.
When I modify rules using the firewall panel it is not generating rules correctly when selecting allow from selected sources deny from others.
View 2 Replies View RelatedI have domainA and domainB. domainA hosting files, for security ALL browser access should denied.. EXCEPT domainB make in php call with readfile() to a file on domainA. This should allowed.
domainB => readfile(http://domainA/myfile) => allowed ... all other access should denied.
So I set in vhost of domainA this:
<DirectoryMatch "^/var/www/vhosts/domainA/httpdocs/folder/">
Order deny,allow
Deny from all
Allow from 127
Allow from server-ipv4
Allow from server-ipv6/128
Allow from ::1/128
</DirectoryMatch>Click to expand...
I getting that message when i try to run one windows program.
Any idea how to fix it?
That program works on netbook but i need to make it work on my main pc.
I am setting up the HotLinking access in cPanel for one of my accounts and don't understand the wording of this section.
It first has the list where you put in the domains that you want to allow hotlinking for.
Then below that it has an input that says, "Extensions to allow:". For this input, does that mean extensions to allow for EVERYONE, or just the domains listed in the section above?
You think they'd be clearer on that in the documentation, but they aren't. Help on this is greatly appreciated.
I am using the plesk firewall and trying to set up SSH rule which only allows from my IP but deny from everywhere else. In previous versions this worked fine by adding an ip selecting Allow from selected sources, deny from others and the icon in the rules would be orange with the lines
allow incoming from xxx.xxx.xxx.xx
Deny incoming from all others
However this no longer works as the deny from all others is not appearing and is not being generated in the iptables by plesk.
I have a Centos 6 server with Heart Internet, who yesterday had an issue with the issue and once back online have been struggling til now getting the mysql service working correctly again and have now refused to provide any further support and redirected me here.
I was following this article here: [URL] ....
I've gotten to point 4. "~# mysqldump -uadmin -p`cat /etc/psa/.psa.shadow` -A | sed '1iSET FOREIGN_KEY_CHECKS = 0;' > /root/dumpall.sql" however it's saying "got error: 145: table './avenue141_dabs/av_options' is marked as crashed and should be repaired when using LOCK TABLES and any attempts made to get into the DB to repair is giving me "error: 1045: Access denied for user 'root'@'localhost' (using password: NO)
This issue is urgent as we have a few websites on this server which use mysql databases for their website.
I would like to install APCu (Alternative PHP Cache) & ZendOptimizer on plesk v12, I just wanted to know if there is any instructions for installing it correctly in a manner that will not cause issues with plesk updates.
View 5 Replies View RelatedLatest Plex installed on a fresh machine. Have tried both Ubuntu 12.04 and 14.04 and cannot seem to have my website work correctly regarding URL rewrites. Its enabled in apache...
View 1 Replies View Relatedtoday i get a vps from lime, and i try to create a vps
but when i try to enable vps i get this message :
Could Not Start Vps, Reason: vzquota : (error) Quota getstat syscall for id 110: Inappropriate ioctl for device: vzquota init failed [3]:
and the disk usage not display properly:
I want to move the data directory to another partition on all nodes. Apache (vhost), IIS (vhost), MySQL (databases) and Postfix (mailbox content). What's the correct way to do this without breaking functionality of PPA?
View 5 Replies View Related