New PS5000 Series From DELL?

Mar 16, 2008

someone have try the new PS5000 series from DELL? i would buy two new storage ISCSI but i dunno betwen EQ or EMC

View 0 Replies


ADVERTISEMENT

EqualLogic PS5000 ISCSI SAN

Mar 23, 2008

Has anyone here tried the Dell/EqualLogic PS5000 series iSCSI SANs? Any opinions on them? I'm looking to use two in a VMWare ESX cluster.

Also, does anyone have any more specific pricing than the 'starting at $19,000' that's been banded around the internet? I have an EqualLogic sales person visiting my offices in a week but would ideally like to get some rough pricing before then (eg: the price difference between SAS and SATA). Trying to get prices out of Dell hasn't been easy so far.

View 4 Replies View Related

Dell Perc 5 Raid Card Non-Dell Server

Oct 17, 2007

Will a Perc 5 raid card work in a non-dell Linux server? These cards can be found for about $100 on eBay, and are much cheaper than the Adaptec cards with similar features and ports.

View 5 Replies View Related

Is This A Good Price For Dell 1u And Question About Dell's Rail

Aug 21, 2007

PowerEdge SC1435 Dual Core AMD Opteron® 2212; 2.0GHz,2X1MB Cache,1Ghz HyperTransport 143G20 [222-6400] 1
Operating System No Operating System NOOS [420-6320] 11
2nd Processor Single Processor Only 1P [311-3928] 2
Memory FREE UPGRADE! 2GB, 667MHz, 4x512MB Single Ranked DIMMs 2G4D6P [466-7879] 3
TCP/IP Offload Engine Enablement Broadcom® Dual Port TCP/IP Offload Engine Not Enabled NTOEKEY [430-1765] 6
PCI Riser Riser with 1 PCIe Slot PCIE [320-4982] 7
1st Hard Drive 80GB 7.2K RPM Serial ATA 3Gbps 3.5-in Cabled Hard Drive 80S2 [341-3801] 8
Primary Controller Onboard SATA Controller - No RAID OBSATA [430-1949] 9
Network Adapters On-Board Dual Port Gigabit Network Adapter, No TOE OBNIC [430-2008] 13
CD/DVD Drive No CD/DVD NOCDDVD [313-3924] 16
Bezel Bezel FRTBZL [313-4477] 17
System Documentation No Hard Copy Documentation, E-Docs ONLY and OpenManage CD Kit EDOCS [310-8261] 21
HD Configuration Onboard SATA, 1 Drive connected to Onboard SATA Controller - NO RAID MST1 [341-3957] 27
Chassis Configuration No Rack Rails Included NORAIL [341-3089] 28
Hardware Support Services 1Yr BASIC SUPPORT: 5x10 HW-Only, 5x10 NBD Onsite U1OS [980-9530][985-5117][985-9057] 29
Installation Support Services No Installation Assessment NOINSTL [900-9997] 32
Power Cords Power Cord, NEMA 5-15P to C14, 15 amp, wall plug, 10 feet / 3 meter WAL10FT [310-4450] 38

why do Dell's none dell rack rail cost $249? Can i buy the rail for dell from ebay? i saw a dell rail cost only $140 on ebay.

View 5 Replies View Related

55XX Series

Apr 23, 2009

Does anyone know a way to put Virtuozzo on a Nehalem node?

Secondly, do these Nehalem's have a great increase in Virtualization like they say, versus the 5450 series?

I would like to know this just for general reference. Because in a VPS to VPS envoironment are these really better? If there's no solution to this I guess the best solution would be a 7xxx 16 core Xeon, what's your opinions on that?

View 11 Replies View Related

I5 And I7 Are The Same As Which Series Xeon

Oct 27, 2009

about thei5 and i7 cpu,

what series of xeon are the same as they are?

View 3 Replies View Related

Juniper J Series

May 9, 2008

Can anyone give any real world numbers as to what each model of the Juniper-J series router is capable of? How much do these routers cost, and where is the best place to get them from?

View 14 Replies View Related

Juniper SSG Series

Dec 26, 2007

In one of our racks, we now just have two Procurve (J4900B) switches, and run software firewalls on our CentOS servers. We are now looking towards a hardware firewall to ease managment and reduce load on our servers.

One of our suppliers reccomends the SSG140 from Juniper, and it seems to cover our needs. The SSG320 however seems to have more features, like layer3 routing. Could this device replace our Procurve switches, and act as a firewall/switch?

Anyone familiar with these devices and have some input on what to choose? How does the anti-ddos and bruteforce attack functions work out, do they hold up? Anyone tested the Deep Inpspection Signature module? Is it worth having for a ISP/Webhost?

View 6 Replies View Related

Juniper J-series

Nov 10, 2007

any experience and feedback on Juniper J-series routers?

View 4 Replies View Related

Dell Drives In A RAID Array With Non-Dell Drives

Sep 14, 2009

I have a couple of Dell 1950s and in one of them, I have 2x Seagate 15K.5s that I purchased through Dell and I also have a spare sitting in my rack in case one goes bad, also from Dell.

I was going to be repurposing one of my other 1950s and was going to get two more 15K.5s for it, but wasn't planning on getting them through Dell (rip off?). This way, could still keep the same spare drive around in case a drive went bad in that system as well.

When I was talking to my Dell rep recently when purchasing another system, their hardware tech said you can't use non-Dell drives with Dell drives in the same RAID array because of the different firmware between them.

Anyone know if it is true? Anyone have any experience with using drives from Dell in conjunction with the same model drives from a third party retailer?

View 1 Replies View Related

Virtuozzo W/ 55xx Series

Apr 16, 2009

Has anyone got Virtuozzo working with the new Nehalem's (55XX) series? I know some people got Xen working and Hyper-V for Windows.

View 4 Replies View Related

Woodcrest Vs Xeon X Series

Jun 21, 2008

i think to buy a dedicated which processor is better,

for big vbulletin and medium php/mysql sites

1- Intel Xeon Dual CPU Dual Core Woodcrest 5160 3.0GHz w/4MB L2 Cache Per Core

2 - Quad Core Xeon X3353 Processor 2x6M Cache, 2.66GHz, 1333MHz

View 2 Replies View Related

Intel 5000 Series

Jan 30, 2008

What is the difference between the Intel 5000V, 5000X, and 5000P? I have done some research on this and depending on the manufacturer they can all be identical. The only difference that I noticed on certain boards was the amounts of memory it can handle. Is that it?

View 1 Replies View Related

Cisco 3750G Series

Aug 12, 2007

I'm researching hardware alternatives to the Foundry switches we currently employ in our DCs. I'm focusing in on the Cisco 3750G-24TS, which seems to cover all the bases I need from a hardware standpoint. What I'm looking for from this crowd is any information they can share about that switch from a service & reliability perspective, especially how Cisco has treated you when you run into problems with the devices.

View 14 Replies View Related

Install Manuals For... Winchester Fc-3400 Series

Oct 31, 2009

I was wondering if any body may have some pdf manuals or such on Winchester sans.

I email'd support but no feed back from them yet, sigh its been well over a year.

View 0 Replies View Related

Nortel 455x Series Comparable Cisco Model

Sep 14, 2009

I used so far Nortel switches like Nortel 4550T-PWR, recently few of them died and since they have only 1 year of warranty i'm looking into other options.

To Nortel is this Cisco comparable model Catalyst 3750 (p/n: WS-C3750-48TS-S) or this Catalyst 3560 48 10/100 + 4 SFP IPB Image(p/n: WS-C3560-48TS-S) ? If is some other model please let me know, and i got around 20 nortel switches 2xxx, 4xxx and 5xxx series and at at least once a year one dies is that normal? They are properly installed in server rooms so there is no overheat issue.

And how much warranty Cisco gives on their switches which are comparable to 4xxx and 5xxx series of Nortel.

View 2 Replies View Related

Best Way To Monitor, Be Alerted To Drive Failure On 3ware 8000 Series Card

Nov 12, 2008

I am not sure exactly which model is in my server, but I know it is in the 3ware 8xxx line.

What is my best option to be alerted to a drive failure. I am running a Raid 1 setup.

I went to 3ware's sight, and wasn't sure exactly which software to download/install.

I am on Centos 5.2 32bit and have Cpanel/WHM installed.

View 4 Replies View Related

Intel Xeon 3200 Series Quad Core VS Intel Core2Quad Q6600

Oct 7, 2008

Intel Xeon 3200 series Quad Core VS Intel Core2Quad Q6600

What stood between Intel Xeon 3200 series Quad Core VS Intel Core2Quad Q6600?

View 14 Replies View Related

HP And DELL

Oct 2, 2007

why don't you buy servers from big guys like HP and DELL? Are they too expensive, or servers are not as good as suposed to be, or something else?

Our company is buying all our computers and printers from HP, we are receiving great customer service, waranty, if something gets wrong - we had computer replaced-no problem!

Maybe some small local guys are selling cheaper and better equipment, but I have peace of mind.

View 14 Replies View Related

Supermicro // Dell // HP

Jul 22, 2009

I know this topic has been brought up before and I wanted to revisit this again. We are a growing hosting company looking to expand our Dedicated server offerings. So far, we have been renting servers and reselling but now we have begun colocating our equipment and are looking for hardware vendors.

Would you recommend us to...

...build our own servers using the Supermicro platform?
...purchase pre-built servers from Dell?
...purchase pre-build servers from HP?

Pricing is of major concern along with speed to provision new orders. Although we don't have a dedicated resource for putting together servers, this is something we can look into should the volume of orders increase. Scalability and Flexibility is a MUST

Thanks for chiming in...

View 11 Replies View Related

Dell, HP Or SuperMicro

May 30, 2009

The technical level in our org is quite low.

We would like some advice on the difference between

1. Supermicro PDSML-LN2
[url]

2. DELL PowerEdge R200
[url]

3. HP Proliant DL120
[url]

Some web hosts here in Singapore are leasing them at comparable rates.

Our research shows that the Dell and HP are comparable and the SuperMicro appears to be in a different (lower) class.

How can the servers be leased at comparable rates if they are from different classes?

View 14 Replies View Related

Dell PowerEdge 860

Jul 9, 2008

I'm thinking about purchasing a Dell PowerEdge 860 and use it as a web server. I need your guy's inputs on what you guys think of this server regarding the quality, performance, & price.

This server retails for about $420 + s/h.

Here are the specs:

PowerEdge 860 Intel® Celeron® Processor 430 at 1.8GHz, 512K Cache, 800MHz FSB
Operating System No Operating System
Memory 512MB DDR2, 667MHz, 1X512MB Single Ranked DIMMs
Riser Card Riser with 2 Slots: 1 PCI Express x8 slot and 1 PCI Express x4 slot
Primary Hard Drive 80GB 7.2K RPM Serial ATA 3Gbps 3.5-in Cabled Hard Drive
Primary Hard Drive Controller Onboard SATA Controller - No RAID
Network Adapter On-Board Dual Gigabit Network Adapter, No TOE
CD/DVD Drive No CD/DVD
Bezel Bezel
Documentation Electronic Documentation and OpenManage DVD Kit
Hard Drive Configuration Onboard SATA, 1 Drive connected to Onboard SATA Controller - No RAID
Rack Rail Options No Rails Included
Hardware Support Services 3Yr BASIC SUPPORT: 5x10 HW-Only, 5x10 NBD Onsite
Installation Support Services No Installation Assessment
Power Cords Power Cord, NEMA 5-15P to C13, 15 amp, wall plug, 10 feet / 3 meter

I know this is a newbie question but with the specs above on the server, will this server be working right out of the box (equipped with PSU & other neccessary equips.) and ready for installtion of linux servers?

View 14 Replies View Related

Dell PE2650 RAC

May 25, 2008

Got a Dell PE 2650 that I sold last week, the guy who has bought it wants the RAC (remote access controller) working on it. Unfortunately I don't have the password for it, in order to log it on, rendering it useless.

Is there any way to reset this password? I've tried resetting BIOS and that didn't work (I believe it's on a separate system)

View 3 Replies View Related

Dell Pe R300

Apr 8, 2008

we would buy the new PE R300 but for now the Drac5 not is yet available but we could buy it as external kit, someone have try it with R300? any issue?

View 0 Replies View Related

Dell 15% Restocking Fee

Apr 18, 2008

I have not read the Dell return policy in a long time as it was an acceptable 30 days for the most part and no restocking fees.

Its going to be difficult ordering new servers that we have not previously experienced with their now 15% restocking fee.

[url]

View 14 Replies View Related

Dell Vs. Supermicro

Apr 26, 2007

configuration on Supermicro hardware and dell hardware, the pricing is pretty much the same 100+/- so thats not an issue.

But I am having a hard time to decide if I should go with supermicro or dell.

But here are the points which I have in mind.

- As far as dell goes, there is a central place for support, for example, if I have any issues, I know who to call exactly and get the issue solved, no resellers involved. If I go with supermicro and buy the hardware from a 3rd party, I dont know who to go to for support say a Motherboard fails or if I have any other questions, should I ask Supermicro themselves or the reseller?

- Has a DRAC card which I've heard is much more powerful than IPMI and I've heard Supermicro has no hardware for remote management as powerful as DRAC, I dont know how true that is.

- If I need any parts I know where I have to go to order them and what exactly to order since they have specific parts for specific server models, I dont know about supermicro.

I know, most of my points are benefiting Dell. But I've heard from the research that Supermicro hardware use less power and have less hard drive failures than Dell Servers, I dont know how true that is.

View 14 Replies View Related

Dell PowerEdge

Jan 6, 2007

i notice the Dell do not configure the on board SATA to any RAID unless you purchase add on RAID adapter.

does this mean you can't configure it yourself? do dell poweredge onboard SATA controller support any RAID at all? do dell allow you to configure it yourself or you must purchase the add on RAID adapter?

View 4 Replies View Related

Dell Blade Server HDD

Jul 26, 2009

how to add additional HDD on Dell M-series blade server. What i have seen till now is that only 2 HDD space is available on those server, i would request expert opinion on this issue. Experienced users please share your views or how did u guyz solve this issue.

View 4 Replies View Related

Dell DRAC II In PE 1500SC

Jun 9, 2009

trying to configure this thing, the software on Dell's site (IT Assistant) is what they tell you to use however it wants to scan the network looking for the device. This won't work because I bought this off ebay and god knows what it is set for right now. What is the easy way to reconfigure and talk to this card? Newer DRACs have a boot time config

View 3 Replies View Related

Your Server Preference Dell / HP / IBM / Other

Oct 5, 2009

Just wondering what is your preference when choosing a vendor based server as a provider? Do you go with Dell? HP? IBM? Or another vendor to offer to your customers? What are your reasons for using the brand you do?

View 4 Replies View Related

Running Dell R710's

Aug 5, 2009

Just wondering what your thoughts are on these. We just got a coupler of them in....fully loaded, and it's extremely quiet compared to the 2950's III...

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved