Juniper SSG Series
Dec 26, 2007
In one of our racks, we now just have two Procurve (J4900B) switches, and run software firewalls on our CentOS servers. We are now looking towards a hardware firewall to ease managment and reduce load on our servers.
One of our suppliers reccomends the SSG140 from Juniper, and it seems to cover our needs. The SSG320 however seems to have more features, like layer3 routing. Could this device replace our Procurve switches, and act as a firewall/switch?
Anyone familiar with these devices and have some input on what to choose? How does the anti-ddos and bruteforce attack functions work out, do they hold up? Anyone tested the Deep Inpspection Signature module? Is it worth having for a ISP/Webhost?
View 6 Replies
ADVERTISEMENT
May 9, 2008
Can anyone give any real world numbers as to what each model of the Juniper-J series router is capable of? How much do these routers cost, and where is the best place to get them from?
View 14 Replies
View Related
Nov 10, 2007
any experience and feedback on Juniper J-series routers?
View 4 Replies
View Related
Oct 5, 2009
I need to protect about 80 servers from certain attacks some of them are being victim of. Altogether, these servers use about 200Mbps being almost all of them webservers. The last time, one of them was a victim of a DDoS attack which made all the rest get some packet loss (because this attack was consuming all the bandwidth we had available).
I was looking at Juniper solutions, however I get a bit confused with all the products they have to offer. First, I was looking at IDP series, but they seem a bit pricey and I believe I donīt need all those IDP functions those devices are capable of. NetScreen is also too expensive for me. Iīm looking at a budget of 10.000$ aprox.
I found SRX series and after taking a look at SRX240 and SRX650 specs [url] those firewall numbers seem very nice and perfect for my problem. Would this be a wise choice? This device would act also as the main router for our racks. Please let me know if there are other recommendations that fit the specified budget (10K).
View 14 Replies
View Related
Apr 17, 2008
Does anyone have any experience running Juniper SSG-550 firewalls in a high-traffic hosting environment?
I run network operations for a hosting provider in Australia. We currently have two J4350s running as border routers, and we are looking at putting two Juniper SSG-550s behind the border routers to do stateful firewalling / NAT.
We'll be using active/active NSRP on the SSGs for load balancing and failover.
My concern is that these devices may not be able to handle our traffic load. They have a hard-set limit of 256,000 "concurrent sessions" which may not be enough for us in peak times. Almost all of our traffic is HTTP though, so I would imagine sessions would timeout quite quickly?
View 5 Replies
View Related
Apr 23, 2009
Does anyone know a way to put Virtuozzo on a Nehalem node?
Secondly, do these Nehalem's have a great increase in Virtualization like they say, versus the 5450 series?
I would like to know this just for general reference. Because in a VPS to VPS envoironment are these really better? If there's no solution to this I guess the best solution would be a 7xxx 16 core Xeon, what's your opinions on that?
View 11 Replies
View Related
Oct 27, 2009
about thei5 and i7 cpu,
what series of xeon are the same as they are?
View 3 Replies
View Related
Oct 11, 2009
I've been reading and searching on here as much as I can to try to help me in making a decision, unfortunately when I think I know what to do, I read something else and get confused again.
We are in the process of moving networks within our datacenter and will have 2 drops coming into our half-cabinet. We have about 7 servers in there, some for our own use and some for clients. In all cases, we manage the servers and are the only ones with root access (no need for VLANs for the purpose of protecting IPs etc).
We currently have a single drop and use an HP procurve 2524 layer2 switch that has been in there for over 6 years and never had a single hiccup. We also don't push much traffic at all though. Under 5mbps combined.
My question though is this: moving to the new network we will have 2 drops that are set up as HSRP on their end (upstream of me, I don't have to worry about having two switches). In order to use the dual feeds, we will need a Layer3 switch. One feed will be active, the other is not, both are connected to the switch via a VLAN and provide a gateway for VLAN2 to use. I have never used a layer3 switch, though I'm not *too* concerned since I don't expect we'll be doing anything too complex. My understanding is that one VLAN (VLAN1) will be set up with an IP address assigned to each drop and that VLAN1 will create a gateway for VLAN2. The second VLAN (VLAN2) will be all our "inside" client IPs that will then route through VLAN1.
I was briefly checking out the cisco 3750, but I think it's overkill...? I don't want to spend too much money, since I don't think we need any complex setups, at the same time, I don't want to waste money by buying something that won't work efficiently down the road.
My immediate short-list is now an HP procurve 2610, an HP procurve 3500 J9470A (not the YL), and a Cisco 3560 24-TS.
Of course, then someone mentioned Juniper (whom I have zero experience with either) and hence the title to my thread... I'm thoroughly confused. I was looking at the EX3200-24T.
Ok, so if I have to boil this down to some simple requirements/thoughts... here goes:
1. I only need 24 ports for now.
2. I use SNMP currently to monitor usage for clients (and overall)
3. I like HPs and have used them for layer2, I like their lifetime warranty and software availability
4. I don't have direct experience with Cisco at all.
5. Aside from routing from one VLAN (provider side) to another VLAN (my side), I don't think I need any other special features (hence the hp 2610 being ok I think, since it offers "lite layer3")
6. Some people say HP is great for layer2 but not for layer3? Now I dont' know what to think.
7. Currently use about 2mbps and might jump to 3 or 4mbps, but don't have major needs. I'd like for this switch to be able to last me a while though... so maybe 20~40mbps+? (but still not the hundreds of mbps that others here push
8. If possible, I'd LIKE to limit some servers to 1mbps or 2mbps on a per-port basis... but this is not a hard requirement. (I think this takes the 2610 out).
Budget: I like the $500 price tag of the 2610, but can spend the $1500~$2000 for the HP 3500, Cisco 3560, or Juniper. I would just rather not, if the price/features are not justifiable.
Hopefully I've provided enough information for someone to offer their insight? I think a few strategic key points or questions from someone with more experience might be what I need to help me bust through the "too many choices" fog and end up with the best switch for my situation...
View 14 Replies
View Related
Nov 10, 2007
I am tried of not finding a good documentation on now to configure netscreen-25 firewall.
This is the current setup;
Ethernet Drop -> Netscreen (connected via straight RJ-45)
NetScreen -> Switch (Connected via cross-over cable)
This is the what I want to be able to do...
I am assigned a 76.36.57.32/27 subnet
Netmask 255.255.255.224
Gateway 76.36.57.33
1) Make Netscreen accessible via IP 76.36.57.34 for remote management.
2) I dont want netscreen to assign IPs for my wired devices because I've already set all their IPs and those are the ones I want to use.
Now, I did read the manual [url] and went to Network -> Interfaces -> Ethernet 1 Trust *edit* and in the "IP address" box I typed 76.36.57.34 and netmask "/27".
In the "Manage IP" box, I typed 76.36.57.39/27 according to the manual.
After doing all that, I cant access any of my "wired" devices behind firewall and neither can I access the firewall itself with the IP I assigned.
View 6 Replies
View Related
Dec 19, 2007
we have this Juniper SSG5 firewall, our very first Juniper and wanted to use it.
While I am able to use it in NAT mode, I have been unsuccessful to use it in route mode.
We have Public IPs from the same segment and I wanted to use it with the firewall but it appears that I can't assign IPs for each port if the IP is from the same segment.
Does it mean that we can't use it other than in NAT mode?
What we want to accomplish is to have one of IPs to act as gateway and filter or route in/out traffic to/from our other IPs.
View 0 Replies
View Related
Apr 16, 2009
Has anyone got Virtuozzo working with the new Nehalem's (55XX) series? I know some people got Xen working and Hyper-V for Windows.
View 4 Replies
View Related
Mar 16, 2008
someone have try the new PS5000 series from DELL? i would buy two new storage ISCSI but i dunno betwen EQ or EMC
View 0 Replies
View Related
Jun 21, 2008
i think to buy a dedicated which processor is better,
for big vbulletin and medium php/mysql sites
1- Intel Xeon Dual CPU Dual Core Woodcrest 5160 3.0GHz w/4MB L2 Cache Per Core
2 - Quad Core Xeon X3353 Processor 2x6M Cache, 2.66GHz, 1333MHz
View 2 Replies
View Related
Jan 30, 2008
What is the difference between the Intel 5000V, 5000X, and 5000P? I have done some research on this and depending on the manufacturer they can all be identical. The only difference that I noticed on certain boards was the amounts of memory it can handle. Is that it?
View 1 Replies
View Related
Aug 12, 2007
I'm researching hardware alternatives to the Foundry switches we currently employ in our DCs. I'm focusing in on the Cisco 3750G-24TS, which seems to cover all the bases I need from a hardware standpoint. What I'm looking for from this crowd is any information they can share about that switch from a service & reliability perspective, especially how Cisco has treated you when you run into problems with the devices.
View 14 Replies
View Related
May 3, 2009
We are searching a firewall for our small colocation.
We have chosen the Juniper SSG 520/550 or a Cisco ASA 5520 (eventually the 5540).
We want primaly filter ddos attacks on our webservers (bot-network, attacking a domain, port 80) and syn flood attacks (port 80).
Do you have real experience with the Juniper or Cisco devices?
Can we integrate such device in the fellowing network design:
(where to put the firewall ?)
- Uplink 1gbit datacenter -> our HP Procurve gigabit switch
- HP Procurve switch -> Servers
We are using /30 as eth0 "bridged", and /29 /28 /27 "routed" over eth0.
I would prefer a "live analysis" of our traffic. Is that possible?
View 12 Replies
View Related
Oct 23, 2007
I've been looking at these two Firewalls for a quite some time and I am not sure which one I should go with. Price is not a factor since both are around the same price range.
The firewall is going to be in between my DROP and LAYER3 Switch.
So...FastE -> Firewall -> Layer3
As you can see, I dont want any fancy VLAN stuff or anything like that since my switch can take care of all that. I just want a firewall which is easy to configure and manage and has DDoS protection built-in.
If you have any other hardware based firewalls in the price range of ASA 5505 and Netscreen 5GT then I would want to hear about those as well.
View 14 Replies
View Related
Nov 25, 2008
I have a SSG-320M I manage, and would like to know if I can block traffic to our web servers based on the user agent hitting us? I know user agents that keep using more and more IP addresses to crawl us, one already taking up some 30 or 40 addresses under my policies and its a pain to identify these by hand and keep updating the firewall every few days to add new IP addresses for them. Is there somewhere I can add part of the user agent I do not want to ever see again? Right now I do this by having a policy at the top saying "BadBotsGroup" is denied. But I want to deny anyone with a user agent "OneUserAgent" or "SecondUserAgent"
It seems so important and simple, but I do not see anything about being able to do this. Thanks for help and pointers. Right now we have special code at the top of our sites that blocks these bots, but I would much rather do it in one location at the firewall.
View 3 Replies
View Related
Oct 31, 2009
I was wondering if any body may have some pdf manuals or such on Winchester sans.
I email'd support but no feed back from them yet, sigh its been well over a year.
View 0 Replies
View Related
Sep 14, 2009
I used so far Nortel switches like Nortel 4550T-PWR, recently few of them died and since they have only 1 year of warranty i'm looking into other options.
To Nortel is this Cisco comparable model Catalyst 3750 (p/n: WS-C3750-48TS-S) or this Catalyst 3560 48 10/100 + 4 SFP IPB Image(p/n: WS-C3560-48TS-S) ? If is some other model please let me know, and i got around 20 nortel switches 2xxx, 4xxx and 5xxx series and at at least once a year one dies is that normal? They are properly installed in server rooms so there is no overheat issue.
And how much warranty Cisco gives on their switches which are comparable to 4xxx and 5xxx series of Nortel.
View 2 Replies
View Related
Aug 23, 2009
Looking to upgrade to a new switch and have the following in mind. Budget is around 1-2k. We're pushing 500mbps upstream so i want to make sure that the unit can handle that well. Lots of full speed traffic between servers too.
No fancy features required, and the only need is port trunking, which all of these have.
I look at the specs for latency and pps, but I'm not sure if you can trust these figures.
Anyone have experience with the following.
HP Procurve 2910al-24
$1430
latency <2.9us
131 Mpps
176 Gbps
Bonus: 10Gb capability with expansion module
Extreme Networks Summit x350
$1300
latency < ?
65 Mpps
88 Gbps
Bonus: 10Gb capability with expansion module
Juniper Juniper EX3200-24T
$1800
latency < ?
65 Mpps
88Gbps
Bonus: 10Gb capability with expansion module
Bonus: 8 ports are POE
Netgear GS724AT
$350
latency <3us
??? Mpps
48Gbps
View 9 Replies
View Related
Nov 5, 2007
to build a new 10GE network and have received offers from Juniper and Cisco distributors.
Juniper seems to be a bit more expensive. It was our first choice at the beginning untill we saw many big ISP's using cisco 6509 with SUP720-3BXL for routing.
Is there anyone with experience on both products? How about support for both of these?
View 14 Replies
View Related
Nov 12, 2008
I am not sure exactly which model is in my server, but I know it is in the 3ware 8xxx line.
What is my best option to be alerted to a drive failure. I am running a Raid 1 setup.
I went to 3ware's sight, and wasn't sure exactly which software to download/install.
I am on Centos 5.2 32bit and have Cpanel/WHM installed.
View 4 Replies
View Related
Oct 7, 2008
Intel Xeon 3200 series Quad Core VS Intel Core2Quad Q6600
What stood between Intel Xeon 3200 series Quad Core VS Intel Core2Quad Q6600?
View 14 Replies
View Related