Just wondering what is your preference when choosing a vendor based server as a provider? Do you go with Dell? HP? IBM? Or another vendor to offer to your customers? What are your reasons for using the brand you do?
View 4 Replies
Will a Perc 5 raid card work in a non-dell Linux server? These cards can be found for about $100 on eBay, and are much cheaper than the Adaptec cards with similar features and ports.
View 5 Replies View RelatedPowerEdge SC1435 Dual Core AMD Opteron® 2212; 2.0GHz,2X1MB Cache,1Ghz HyperTransport 143G20 [222-6400] 1
Operating System No Operating System NOOS [420-6320] 11
2nd Processor Single Processor Only 1P [311-3928] 2
Memory FREE UPGRADE! 2GB, 667MHz, 4x512MB Single Ranked DIMMs 2G4D6P [466-7879] 3
TCP/IP Offload Engine Enablement Broadcom® Dual Port TCP/IP Offload Engine Not Enabled NTOEKEY [430-1765] 6
PCI Riser Riser with 1 PCIe Slot PCIE [320-4982] 7
1st Hard Drive 80GB 7.2K RPM Serial ATA 3Gbps 3.5-in Cabled Hard Drive 80S2 [341-3801] 8
Primary Controller Onboard SATA Controller - No RAID OBSATA [430-1949] 9
Network Adapters On-Board Dual Port Gigabit Network Adapter, No TOE OBNIC [430-2008] 13
CD/DVD Drive No CD/DVD NOCDDVD [313-3924] 16
Bezel Bezel FRTBZL [313-4477] 17
System Documentation No Hard Copy Documentation, E-Docs ONLY and OpenManage CD Kit EDOCS [310-8261] 21
HD Configuration Onboard SATA, 1 Drive connected to Onboard SATA Controller - NO RAID MST1 [341-3957] 27
Chassis Configuration No Rack Rails Included NORAIL [341-3089] 28
Hardware Support Services 1Yr BASIC SUPPORT: 5x10 HW-Only, 5x10 NBD Onsite U1OS [980-9530][985-5117][985-9057] 29
Installation Support Services No Installation Assessment NOINSTL [900-9997] 32
Power Cords Power Cord, NEMA 5-15P to C14, 15 amp, wall plug, 10 feet / 3 meter WAL10FT [310-4450] 38
why do Dell's none dell rack rail cost $249? Can i buy the rail for dell from ebay? i saw a dell rail cost only $140 on ebay.
I know SCSI drives are better than SATA, but I wonder if the community will prefer SATA or SCSI especially when you will be paying more for less.
Heres an example.
You can get:
2GB SATA for $5 & 500MB SCSI for $5, which will you choose?
When I try to change a domain name preference from www to non-www i am getting the error
"Error: No secure shell available"
I am using plesk 12 ....Â
how to add additional HDD on Dell M-series blade server. What i have seen till now is that only 2 HDD space is available on those server, i would request expert opinion on this issue. Experienced users please share your views or how did u guyz solve this issue.
View 4 Replies View RelatedWe are looking for a couple of servers for streaming media application and database application. We are wondering if anyone can give us some suggestions as to whether to use a used-Dell 1750 or 1850 vs. a new Taiwan-made server such as Chenbro servers?
Will a used-Dell servers better or worst than a new white-label servers? Can anyone give recommedation on which servers to use? We need something that is very reliable but we definitely can't afford something like a new IBM or Dell.
alternative to OMSA to monitor dell server, for now i would monitor only raid status on Pe 860-1850-195
View 2 Replies View Relatedif i remember correctly, the best time to buy Dell's ware for cheap is at the end of the quarter. is this correct?
when do you purchase hardware from Dell?
I look after a Dell PE2800 server, it has a pair of 5.25 bays on the front, the top most of the two contains a Dell PowerVault 100T DAT72 tape backup drive. I have a second identical drive that i now wish to install into the bay beneath in a similar manner.
Problem is this - my colleague tell me that Dell are no longer selling the mounting brackets / rails needed to install the drive. I have had a fruitless look through the internet for a number of weeks now and hope that someone in the forum may be able to suggest a solution to the problem... anybody know a source for the brackets? Is there a parts site somewhere ive missed? Anyone happen to have what im after? Or any alternative suggestions?
I have a couple of Dell 1950s and in one of them, I have 2x Seagate 15K.5s that I purchased through Dell and I also have a spare sitting in my rack in case one goes bad, also from Dell.
I was going to be repurposing one of my other 1950s and was going to get two more 15K.5s for it, but wasn't planning on getting them through Dell (rip off?). This way, could still keep the same spare drive around in case a drive went bad in that system as well.
When I was talking to my Dell rep recently when purchasing another system, their hardware tech said you can't use non-Dell drives with Dell drives in the same RAID array because of the different firmware between them.
Anyone know if it is true? Anyone have any experience with using drives from Dell in conjunction with the same model drives from a third party retailer?
Does anyone have a preference for Host Excellence compared to Blue Host?
Do you think their basic offers are the same?
This is for just a couple of simple domains and sites to be hosted.
why don't you buy servers from big guys like HP and DELL? Are they too expensive, or servers are not as good as suposed to be, or something else?
Our company is buying all our computers and printers from HP, we are receiving great customer service, waranty, if something gets wrong - we had computer replaced-no problem!
Maybe some small local guys are selling cheaper and better equipment, but I have peace of mind.
I know this topic has been brought up before and I wanted to revisit this again. We are a growing hosting company looking to expand our Dedicated server offerings. So far, we have been renting servers and reselling but now we have begun colocating our equipment and are looking for hardware vendors.
Would you recommend us to...
...build our own servers using the Supermicro platform?
...purchase pre-built servers from Dell?
...purchase pre-build servers from HP?
Pricing is of major concern along with speed to provision new orders. Although we don't have a dedicated resource for putting together servers, this is something we can look into should the volume of orders increase. Scalability and Flexibility is a MUST
Thanks for chiming in...
The technical level in our org is quite low.
We would like some advice on the difference between
1. Supermicro PDSML-LN2
[url]
2. DELL PowerEdge R200
[url]
3. HP Proliant DL120
[url]
Some web hosts here in Singapore are leasing them at comparable rates.
Our research shows that the Dell and HP are comparable and the SuperMicro appears to be in a different (lower) class.
How can the servers be leased at comparable rates if they are from different classes?
I'm thinking about purchasing a Dell PowerEdge 860 and use it as a web server. I need your guy's inputs on what you guys think of this server regarding the quality, performance, & price.
This server retails for about $420 + s/h.
Here are the specs:
PowerEdge 860 Intel® Celeron® Processor 430 at 1.8GHz, 512K Cache, 800MHz FSB
Operating System No Operating System
Memory 512MB DDR2, 667MHz, 1X512MB Single Ranked DIMMs
Riser Card Riser with 2 Slots: 1 PCI Express x8 slot and 1 PCI Express x4 slot
Primary Hard Drive 80GB 7.2K RPM Serial ATA 3Gbps 3.5-in Cabled Hard Drive
Primary Hard Drive Controller Onboard SATA Controller - No RAID
Network Adapter On-Board Dual Gigabit Network Adapter, No TOE
CD/DVD Drive No CD/DVD
Bezel Bezel
Documentation Electronic Documentation and OpenManage DVD Kit
Hard Drive Configuration Onboard SATA, 1 Drive connected to Onboard SATA Controller - No RAID
Rack Rail Options No Rails Included
Hardware Support Services 3Yr BASIC SUPPORT: 5x10 HW-Only, 5x10 NBD Onsite
Installation Support Services No Installation Assessment
Power Cords Power Cord, NEMA 5-15P to C13, 15 amp, wall plug, 10 feet / 3 meter
I know this is a newbie question but with the specs above on the server, will this server be working right out of the box (equipped with PSU & other neccessary equips.) and ready for installtion of linux servers?
Got a Dell PE 2650 that I sold last week, the guy who has bought it wants the RAC (remote access controller) working on it. Unfortunately I don't have the password for it, in order to log it on, rendering it useless.
Is there any way to reset this password? I've tried resetting BIOS and that didn't work (I believe it's on a separate system)
we would buy the new PE R300 but for now the Drac5 not is yet available but we could buy it as external kit, someone have try it with R300? any issue?
View 0 Replies View RelatedI have not read the Dell return policy in a long time as it was an acceptable 30 days for the most part and no restocking fees.
Its going to be difficult ordering new servers that we have not previously experienced with their now 15% restocking fee.
[url]
configuration on Supermicro hardware and dell hardware, the pricing is pretty much the same 100+/- so thats not an issue.
But I am having a hard time to decide if I should go with supermicro or dell.
But here are the points which I have in mind.
- As far as dell goes, there is a central place for support, for example, if I have any issues, I know who to call exactly and get the issue solved, no resellers involved. If I go with supermicro and buy the hardware from a 3rd party, I dont know who to go to for support say a Motherboard fails or if I have any other questions, should I ask Supermicro themselves or the reseller?
- Has a DRAC card which I've heard is much more powerful than IPMI and I've heard Supermicro has no hardware for remote management as powerful as DRAC, I dont know how true that is.
- If I need any parts I know where I have to go to order them and what exactly to order since they have specific parts for specific server models, I dont know about supermicro.
I know, most of my points are benefiting Dell. But I've heard from the research that Supermicro hardware use less power and have less hard drive failures than Dell Servers, I dont know how true that is.
i notice the Dell do not configure the on board SATA to any RAID unless you purchase add on RAID adapter.
does this mean you can't configure it yourself? do dell poweredge onboard SATA controller support any RAID at all? do dell allow you to configure it yourself or you must purchase the add on RAID adapter?
trying to configure this thing, the software on Dell's site (IT Assistant) is what they tell you to use however it wants to scan the network looking for the device. This won't work because I bought this off ebay and god knows what it is set for right now. What is the easy way to reconfigure and talk to this card? Newer DRACs have a boot time config
View 3 Replies View RelatedJust wondering what your thoughts are on these. We just got a coupler of them in....fully loaded, and it's extremely quiet compared to the 2950's III...
View 7 Replies View RelatedAnyone have used them ? I tried to find some informations, but can't find any... seems to be new!
I plan to buy one with 2 x 146GB 15k SAS and 4 x 1TB SATA and use it as NFS for XenServer or ESXi (both free version) to have a manual (human) failover (or maybe scripted if I can).
I was wondering if anybody has experience dealing with Dell India for servers, racks etc. I find it very hard to get decent pricing, including trying to get them to match Dell UK/US/Canada quotes. Is this normal?
View 14 Replies View RelatedI'm not sure if this is the correct forum for this question.
I need to buy some new servers. I have two options:
- HP DL120 G5
- DELL R200 (more expensive than DL120)
I want to know your opinions about this servers. Two servers have the same specs:
Intel® Xeon® 3065 Dual Core a 2,33 GHz
2 GB RAM
250 GB SATA
I already have some R200, but I have never tried none HP server.
And about power consumption, ¿what server have the lowest usage?
we are a small shop...
Not looking to buy another switch but we have a crapshoot of switches around. Dell 5448,
HP 2910 and a Cisco 3560.
I'd like to keep the the Cisco back in HQ stock since it's a POE switch.
We are colocating just 1 SAN intially. Max of maybe 7-8 Servers total in the future. Not alot of bandwidth and doing L2 traffic only. Any issues with either the Dell or HP in the colo environment from a production standpoint. We have used a couple of Procurves in our environment, and the dell switches were freebies that were part of our last order.
Basically, it would look like this
ASA5510 serving as main headed VPN
2 Branch Offices connecting to it
One L2 Switch. 2 - 3 Seperate Vlans with a trunk port back out to the ASA5510
Anyone know the purpose of the battery on the DracIII cards and what the part number is? I have a Drac III card I want to use, however no battery is on it as it was provided without. Trying to scope if it is really essential and what its purpose is, can't quite find out if it's volatile ram on the card or flash ram and no need for a battery.
View 6 Replies View RelatedI've got a compaq rack here and the guy i bought it from has some cage nuts in it to mount hardware(square holes).
well the nuts he has in it doesn't fit any of my Dell hardware... Where can i find cage nuts that will fit dell hardware?
someone have try the new PS5000 series from DELL? i would buy two new storage ISCSI but i dunno betwen EQ or EMC
View 0 Replies View Relatedwhat is the difference in the PE 1950 III vs the original 1950? We're trying to get a couple in house but 1st must get a better price than $2,475 for the following specs below.
If anyone has a good sales rep at Dell (ours no longer works there), please send it via PM.
Dell PowerEdge 1950 III Specs:
2xQuad Core Xeon E5410 2.33 GHz Processors
4x1GB Ram
PERC6i RAID Controller
2x500GB 7.2k SATA 3Gbps HDs
CD-Rom/DVD
3yrs Support (5x10 HW, 5x10 NBD)
Price: $2,475.00
