Sending and receiving from yahoo,google mail is just fine.
But when i try to receive email from another server or an localdomain on same server, i receive an email with the below content:
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
support@xxx1.com
SMTP error from remote mail server after RCPT TO:<support@xxx1.com>:
host xxx1.com [xxx.xxx.31.49]: 550-Verification failed for <admin@xxx2.com>
550-No Such User Here
550 Sender verify failed
I am not sure it is the issue of sender or receiver?
I'm in the process of moving some websites between hosts... from Dreamhost to a VPS.
Basically I want to make sure that no emails get lost in the transfer, as it's possible some people haven't collected their emails. I'm only talking about 5 or 6 sites here with about 15 mailboxes in total.
I have pop3 set up on the VPS with exim4 and courier using Maildir's. I have imap/pop3 access to emails on dreamhost and all my clients only use pop3.
Dreamhost doesn't provide direct access to the Maildir's of users, so I was planning on using offlineimap to save a copy of each mailbox and move it into the Maildir of the user on the VPS. I.e. move the contents of INBOX/new into user/Maildir/new etc. I'll do this once the dns settings have propogated so I can be sure to have every single email.
Does this sound reasonable? Is anything likely to break? Will any email clients break with any of these transferred emails? I tried it with a test account and it seemed OK, but I would like an experts opinion on whether or not this is the best way of achieving what I'm trying to do
I am running plesk 11.05 Plesk on windows server. I have noticed this things twice...
While migrating accounts one server to another Smartermail not showing actual mail received date. For all accounts and emails Smartermail showing Migration date..
My more than 10000 emails showing migration date as received date..
I have the users daemon, freesexd and root in the trusted_users file. I have restarted sendmail (using service sendmail restart). I have the domains: server.freesexdoor.com, freesexdoor.com and mail.freesexdoor.com in the sendmail's local_hosts file.
In Apache 2's httpd.conf, I have this: php_admin_value sendmail_path '/usr/sbin/sendmail -t -i -f freesexd [at} freesexdoor.com'
Yet when I sent an e-mail with php to advertising [at} freesexdoor.com, I got these headers in the e-mail, which don't look good to a spam filter:
Received: from localhost.localdomain (IS-3293 [127.0.0.1]) by localhost.localdomain (8.13.8/8.13.8) with ESMTP id
Received: (from daemon@localhost) by localhost.localdomain (8.13.8/8.13.8/Submit) id
Additionally hotmail rejects my e-mails and it is obvious why. (My OpenSPF record is fine btw and on my former server I was able to send e-mails with it fine.)
Naturally I want something like "freesexdoor.com" to replace "localhost.localdomain" in those header lines. So how can I get this working?
I'm planning to buy a high end VPS for reselling as a whole.
Does any one know how to change the VZ SSL to localhost.localdomain as shown in the attachment? I asked many providers and non of them like to change this. I got one provider willing to change this for me but he's not very sure how.
Someone told me that "Ask your provider to study how VZPP is handled by apache in the service container and they should find his way through"
I'm already aware that this should be done from the main hardware node not from the clients VPS itself.
My server seems to be set up okay and almost everything works except for email.
Sending using Outlook or Telnet both appear to send okay and checking for email also appears to work okay. It is just that no emails are ever received (neither sending or receiving produce any errors on the email client).
In my logs I do see an error: Jan 2 11:15:05 cobalt sendmail[29380]: l02AF5mA029380: localhost [127.0.0.1] did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA Jan 2 11:15:05 cobalt dovecot: pop3-login: Aborted login: rip=127.0.0.1, lip=12
I have a detected server and it host one domain with many sub domains account. I never used the cpanel DNS service, instead I used the hosting company’s DNS. .Everything was working fine (including the email) until I decided to have my own DNS. I used the domain register company DNS service to create a DNS records for the domain and all my sub-domains. The problem is the email did not work yet!! Here what I done with the DNS :
eg.com my domain and 1.1.1.1 the server IP address (e.g.) Type--- Name ---- Domain -- Data ---Pref A---- ---- eg.com ---- 1.1.1.1 A---- *. ---- eg.com ---- 1.1.1.1 A---- forum. ---- eg.com ---- 1.1.1.1 A---- mail. ---- eg.com ---- 1.1.1.1 MX---- ---- eg.com ---- 1.1.1.1----0 MX---- *. ---- eg.com ---- 1.1.1.1----0
I update the nameserver in the cpanel basic setup. It should work fine, I don’t know what goes wrong? I never touch the server configuration, the server was relay on external DNS service.
Here are the error that I got when I tried to send an email to the server :
info@eg.com SMTP error from remote mail server after RCPT TO:: host mail.eg.com [1.1.1.1]: 550-Verification failed for ....
A client is sometimes not receiving email (ie. they are informed by phone that one was sent a day or two earlier but they didn't receive it). When this happens the sender doesn't get any error message back. I had the server logs checked out for an email I sent the client that he didn't receive and the server did receive it. I logged on to the webmail and it wasn't there, but client says it's not in his inbox. I asked them to check all spam or other folders in his email software but to no avail. The problem can happen with emails that have attachments and those without. It's not happening for any particular sender either. My client cannot see any pattern to it.
I wanted to try HyperVM/LxAdmin setup from sometime now. I finally have one but I am getting trouble with its Qmail MTA. I am posting here hoping to get some help.
Let me tell you the issue.
I have my main vps IP: 10.10.10.22 (I have 3 additional ips).
I have setup 2 domains on their dedicated IPs. (10.10.10.23 & 10.10.10.24). However, whenever I send an email, I get outgoing IP to be 10.10.10.22. I searched on Google and found out that I need to patch qmail with outgoingip.patch to change the outgoing IP.
But how to patch my already installed qmail??? I tried but failed. I am running Centos 5.3 with HyperVM/Lxadmin
Also, even if I host a domain on main IP, my SPF record is always
Quote:
Received-SPF: neutral (google.com: 10.10.10.22 is neither permitted nor denied by domain domain.com) client-ip=10.10.10.22;
I am using Cute FTP 7.0 Professional. The FTP server that I am trying to connect is firewall protected and hence I am using port method. But still I am facing problems in logging in. The following is the transcript of the command window:
*** CuteFTP 7.0 - build Jun 7 2005 ***
STATUS:> Getting listing ""... STATUS:> Connecting to FTP server 216.185.43.181:21 (ip = 216.185.43.181)... STATUS:> Socket connected. Waiting for welcome message... 220 Microsoft FTP Service STATUS:> Connected. Authenticating... COMMAND:> USER bizconsultancy 331 Password required for bizconsultancy. COMMAND:> PASS ***** 230 User bizconsultancy logged in. STATUS:> Login successful. COMMAND:> PWD 257 "/bizconsultancy" is current directory. STATUS:> Home directory: /bizconsultancy COMMAND:> FEAT 211-FEAT SIZE MDTM 211 END STATUS:> This site supports features. STATUS:> This site supports SIZE. COMMAND:> REST 100 350 Restarting at 100. STATUS:> This site can resume broken downloads. COMMAND:> REST 0 350 Restarting at 0. COMMAND:> PORT 192,168,0,14,7,111 200 PORT command successful. COMMAND:> LIST 150 Opening ASCII mode data connection for /bin/ls. ERROR:> Can't read from data socket. Socket error = #10054. 425 Can't open data connection. ERROR:> Trashed response received.
Some of the e-mails I send are received several times by my recipients. I use Outlook Express. I send the e-mail only once but some people are complaining that they receive the same message as many as 10 times sometimes. Do you know what can be causing it?
I maintain a server with a few domains. The server runs Plesk and Mailman. There are about 50 mailing lists with number of subscribers ranging from a couple people to a few hundred people. All work fine.
There is an additional list with around 2500 subscribers. Messages sent to this list are being received with nearly 500 identical "Received-SPF: pass" lines. Besides seeming odd, it's particularly problematic as some domains are bouncing the emails because the header is too large.
This behavior started after I upgraded from Plesk 11.x to 12.x.
The SPF lines look like this:
Received-SPF: pass (SERVER-HOSTNAME-HERE: localhost is always allowed.) client-ip=127.0.0.1; envelope-from=BOUNCE-LIST-ADDRESS-HERE; helo=SERVER-HOSTNAME-HERE;
Where SERVER-HOSTNAME-HERE is our hostname and BOUNCE-LIST-ADDRESS-HERE is the list's bounce address.
For what it's worth the server hostname and the domain of the list do not match.
This issue seems to be tied to the number of subscribers. We made a new list with a few subscribers and messages looked fine. We added the 2500 subscribers to the new list and then we saw the plentiful Received-SPF: pass entries.
I have a problem where all email sent from uaccb.edu (studentmail.uaccb.edu [208.190.226.130]} is not arriving at my VPS. The people sending email from the above domain are not getting any errors, it is not being marked as spam, it is just being blackholed somehow.
I have checked the above IP and domain, and can't find it on any blacklist, and I am using pretty standard cPanel setup on my VPS. I have spam set to be marked and receive a fair amount and have it autorouted to a folder rather than auto-deleted.
From uaccb.edu, the only thing I have access to is Outlook Web Access to send test emails, and they are sent fine with no errors returned. If I send test emails to gmail and other similar email accounts, they go through fine, the only problem is to ANY domain hosted on my VPS. I have even recently transferred all the domains to a second VPS (with the same hosting company) at a different datacenter (for different reason) and the problem persists.
Is there any WHM setting or any ideas on how to troubleshoot this?
I am having a peculiar problem, when ever I attempt to access my server globally I get the dreaded 'No Data Received' error.
The machine is running Ubuntu 13.10 and is a dedicated server (I do not have GUI or physical access to the machine). All ports are open, iptables disabled, yet nothing works (running on port 80). I loaded the files onto a different computer at home and it works nicely, but not on the dedicated server.
Also, when the Apache server is off it says it can not connect in my browser, and when the server is on it says 'No Data Received' ...
Not sure if all notifications are working or not but I do know that when I create a new customer with a new subscription no notification is received. I have tested with several email addresses.
There was an error sending your message: Failed to add recipient: xxxxx@hotmail.com [SMTP: Invalid response code received from server (code: 451, response: Temporary local problem - please try later)]
