Some of the e-mails I send are received several times by my recipients. I use Outlook Express. I send the e-mail only once but some people are complaining that they receive the same message as many as 10 times sometimes. Do you know what can be causing it?
View 1 RepliesMy server seems to be set up okay and almost everything works except for email.
Sending using Outlook or Telnet both appear to send okay and checking for email also appears to work okay. It is just that no emails are ever received (neither sending or receiving produce any errors on the email client).
In my logs I do see an error:
Jan 2 11:15:05 cobalt sendmail[29380]: l02AF5mA029380: localhost [127.0.0.1] did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA
Jan 2 11:15:05 cobalt dovecot: pop3-login: Aborted login: rip=127.0.0.1, lip=12
I have a detected server and it host one domain with many sub domains account. I never used the cpanel DNS service, instead I used the hosting company’s DNS. .Everything was working fine (including the email) until I decided to have my own DNS. I used the domain register company DNS service to create a DNS records for the domain and all my sub-domains. The problem is the email did not work yet!! Here what I done with the DNS :
eg.com my domain and 1.1.1.1 the server IP address (e.g.)
Type--- Name ---- Domain -- Data ---Pref
A---- ---- eg.com ---- 1.1.1.1
A---- *. ---- eg.com ---- 1.1.1.1
A---- forum. ---- eg.com ---- 1.1.1.1
A---- mail. ---- eg.com ---- 1.1.1.1
MX---- ---- eg.com ---- 1.1.1.1----0
MX---- *. ---- eg.com ---- 1.1.1.1----0
I update the nameserver in the cpanel basic setup. It should work fine, I don’t know what goes wrong? I never touch the server configuration, the server was relay on external DNS service.
Here are the error that I got when I tried to send an email to the server :
info@eg.com
SMTP error from remote mail server after RCPT TO::
host mail.eg.com [1.1.1.1]:
550-Verification failed for ....
A client is sometimes not receiving email (ie. they are informed by phone that one was sent a day or two earlier but they didn't receive it). When this happens the sender doesn't get any error message back. I had the server logs checked out for an email I sent the client that he didn't receive and the server did receive it. I logged on to the webmail and it wasn't there, but client says it's not in his inbox. I asked them to check all spam or other folders in his email software but to no avail. The problem can happen with emails that have attachments and those without. It's not happening for any particular sender either. My client cannot see any pattern to it.
View 3 Replies View RelatedI wanted to try HyperVM/LxAdmin setup from sometime now. I finally have one but I am getting trouble with its Qmail MTA. I am posting here hoping to get some help.
Let me tell you the issue.
I have my main vps IP: 10.10.10.22 (I have 3 additional ips).
I have setup 2 domains on their dedicated IPs. (10.10.10.23 & 10.10.10.24). However, whenever I send an email, I get outgoing IP to be 10.10.10.22. I searched on Google and found out that I need to patch qmail with outgoingip.patch to change the outgoing IP.
But how to patch my already installed qmail??? I tried but failed.
I am running Centos 5.3 with HyperVM/Lxadmin
Also, even if I host a domain on main IP, my SPF record is always
Quote:
Received-SPF: neutral (google.com: 10.10.10.22 is neither permitted nor denied by domain domain.com) client-ip=10.10.10.22;
I need help with email issue.
Sending and receiving from yahoo,google mail is just fine.
But when i try to receive email from another server or an localdomain on same server, i receive an email with the below content:
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
support@xxx1.com
SMTP error from remote mail server after RCPT TO:<support@xxx1.com>:
host xxx1.com [xxx.xxx.31.49]: 550-Verification failed for <admin@xxx2.com>
550-No Such User Here
550 Sender verify failed
I am not sure it is the issue of sender or receiver?
I am using Cute FTP 7.0 Professional. The FTP server that I am trying to connect is firewall protected and hence I am using port method. But still I am facing problems in logging in. The following is the transcript of the command window:
*** CuteFTP 7.0 - build Jun 7 2005 ***
STATUS:> Getting listing ""...
STATUS:> Connecting to FTP server 216.185.43.181:21 (ip = 216.185.43.181)...
STATUS:> Socket connected. Waiting for welcome message...
220 Microsoft FTP Service
STATUS:> Connected. Authenticating...
COMMAND:> USER bizconsultancy
331 Password required for bizconsultancy.
COMMAND:> PASS *****
230 User bizconsultancy logged in.
STATUS:> Login successful.
COMMAND:> PWD
257 "/bizconsultancy" is current directory.
STATUS:> Home directory: /bizconsultancy
COMMAND:> FEAT
211-FEAT
SIZE
MDTM
211 END
STATUS:> This site supports features.
STATUS:> This site supports SIZE.
COMMAND:> REST 100
350 Restarting at 100.
STATUS:> This site can resume broken downloads.
COMMAND:> REST 0
350 Restarting at 0.
COMMAND:> PORT 192,168,0,14,7,111
200 PORT command successful.
COMMAND:> LIST
150 Opening ASCII mode data connection for /bin/ls.
ERROR:> Can't read from data socket. Socket error = #10054.
425 Can't open data connection.
ERROR:> Trashed response received.
I maintain a server with a few domains. The server runs Plesk and Mailman. There are about 50 mailing lists with number of subscribers ranging from a couple people to a few hundred people. All work fine.
There is an additional list with around 2500 subscribers. Messages sent to this list are being received with nearly 500 identical "Received-SPF: pass" lines. Besides seeming odd, it's particularly problematic as some domains are bouncing the emails because the header is too large.
This behavior started after I upgraded from Plesk 11.x to 12.x.
The SPF lines look like this:
Received-SPF: pass (SERVER-HOSTNAME-HERE: localhost is always allowed.) client-ip=127.0.0.1; envelope-from=BOUNCE-LIST-ADDRESS-HERE; helo=SERVER-HOSTNAME-HERE;
Where SERVER-HOSTNAME-HERE is our hostname and BOUNCE-LIST-ADDRESS-HERE is the list's bounce address.
For what it's worth the server hostname and the domain of the list do not match.
This issue seems to be tied to the number of subscribers. We made a new list with a few subscribers and messages looked fine. We added the 2500 subscribers to the new list and then we saw the plentiful Received-SPF: pass entries.
I'm in the process of moving some websites between hosts... from Dreamhost to a VPS.
Basically I want to make sure that no emails get lost in the transfer, as it's possible some people haven't collected their emails. I'm only talking about 5 or 6 sites here with about 15 mailboxes in total.
I have pop3 set up on the VPS with exim4 and courier using Maildir's. I have imap/pop3 access to emails on dreamhost and all my clients only use pop3.
Dreamhost doesn't provide direct access to the Maildir's of users, so I was planning on using offlineimap to save a copy of each mailbox and move it into the Maildir of the user on the VPS. I.e. move the contents of INBOX/new into user/Maildir/new etc. I'll do this once the dns settings have propogated so I can be sure to have every single email.
Does this sound reasonable? Is anything likely to break? Will any email clients break with any of these transferred emails? I tried it with a test account and it seemed OK, but I would like an experts opinion on whether or not this is the best way of achieving what I'm trying to do
[Sun Jul 27 15:06:12 2008] [error] [client ] % Total % Received % X
[Sun Jul 27 15:06:12 2008] [error] [client ] ferd Average Speed Time Time Time Current
[Sun Jul 27 15:06:12 2008] [error] [client ] Dload Upload Total Spent Left Speed
[Sun Jul 27 15:06:12 2008] [error] [client ]
0 0 0 0 0 0 0 0 --:--:-- --:--:-- 0
0 0 0 0 0 0 0 0 --:--:-- 0
Have you ever seen error like this?
i have installed today Reverse Proxy Nginx on Plesk 12. After have activing Nginx, website show "no data received".
Nginx error.log:
PHP: no "ssl_certificate" is defined in server listening on SSL port while SSL handshaking-----conflicting server name
I have a problem where all email sent from uaccb.edu (studentmail.uaccb.edu [208.190.226.130]} is not arriving at my VPS. The people sending email from the above domain are not getting any errors, it is not being marked as spam, it is just being blackholed somehow.
I have checked the above IP and domain, and can't find it on any blacklist, and I am using pretty standard cPanel setup on my VPS. I have spam set to be marked and receive a fair amount and have it autorouted to a folder rather than auto-deleted.
From uaccb.edu, the only thing I have access to is Outlook Web Access to send test emails, and they are sent fine with no errors returned. If I send test emails to gmail and other similar email accounts, they go through fine, the only problem is to ANY domain hosted on my VPS. I have even recently transferred all the domains to a second VPS (with the same hosting company) at a different datacenter (for different reason) and the problem persists.
Is there any WHM setting or any ideas on how to troubleshoot this?
I am having a peculiar problem, when ever I attempt to access my server globally I get the dreaded 'No Data Received' error.
The machine is running Ubuntu 13.10 and is a dedicated server (I do not have GUI or physical access to the machine). All ports are open, iptables disabled, yet nothing works (running on port 80). I loaded the files onto a different computer at home and it works nicely, but not on the dedicated server.
Also, when the Apache server is off it says it can not connect in my browser, and when the server is on it says 'No Data Received' ...
Not sure if all notifications are working or not but I do know that when I create a new customer with a new subscription no notification is received. I have tested with several email addresses.
View 1 Replies View RelatedI am running plesk 11.05 Plesk on windows server. I have noticed this things twice...
While migrating accounts one server to another Smartermail not showing actual mail received date. For all accounts and emails Smartermail showing Migration date..
My more than 10000 emails showing migration date as received date..
I have just come here to see if anyone else has experienced long setup times with the NY NOC?
It has been 4.5 days now and still no welcome email.
I emailed sales asking for an ETA and they just said due to the public holiday your server will be setup tomorrow (that was 2 days ago)
I emailed sales again and got no reply. NOCANDY replied on here saying yes things got delayed your server will be up shortly. (that was yesterday)
I have asked for a full refund lets see what happens
I recently took the AMD opteron special they had going for $69/m which i thought was pretty good but i wont even get to try it
my question. We host around 40 websites that have hundreds of pictures. I have 60gigs dedicated to pictures alone. since we are getting more clients I want to get a bigger hard drive just for the pictures. Since my boss is obssesed with user access times, as in users accessing the pictures on the web on their end, he thinks getting a bigger hard drive will slow down the server and hence slow down access time serving out the pictures to end users. I guess what I'm saying is does a bigger hard drive slow down a website?
Let me know if you need clarification I wasn't sure how to word this.
[url]
Just enter the IP,etc and it tells you how many hits,etc on said IP.
I've recently moved server and since then I've had a problem with the main site I administrate. The problem is that when I'm moving around the site I frequently get long lag times between clicking on a link and getting to that next page. This isn't slow transfer speeds - the status bar shows 'waiting for xxxx' for sometimes 15 to 20 seconds. The site makes quite heavy use of a MySQL database and associated forum software.
It was suggested I did some tracerts to see what that showed. The thing is I don't know what the significance of tracert results are! It seems to show lots of timeouts - but then it shows lots of timeouts when I try it on other sites as well, which don't have the same lag problems.
I have no reasons to think it's my host, who are really good and responsive. But my ISP says it's nothing to do with them either. If the routing is a problem, where lies the responsibility for selecting the routes between me and the server to my site?
I'm hoping this is just the link between me and my site, as other site users don't seem to have had a problem yet. I'll post a couple of tracert results in case anyone is able to advise me on what their significance might be.
For some reasons I cant access any of my accounts on my dedicated server via FTP. It simply times out when it tried to display the directories.
Heres a log from FileZila...
Code:
Status:Resolving address of testdomain.com
Status:Connecting to 64.237.58.43:21...
Status:Connection established, waiting for welcome message...
Response:220---------- Welcome to Pure-FTPd [TLS] ----------
Response:220-You are user number 3 of 50 allowed.
Response:220-Local time is now 19:39. Server port: 21.
Response:220-This is a private system - No anonymous login
Response:220-IPv6 connections are also welcome on this server.
Response:220 You will be disconnected after 15 minutes of inactivity.
Command:USER testaccount
Response:331 User testaccount OK. Password required
Command:PASS ********
Response:230-User testaccount has group access to: testaccount
Response:230 OK. Current restricted directory is /
Command:SYST
Response:215 UNIX Type: L8
Command:FEAT
Response:211-Extensions supported:
Response: EPRT
Response: IDLE
Response: MDTM
Response: SIZE
Response: REST STREAM
Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
Response: MLSD
Response: ESTP
Response: PASV
Response: EPSV
Response: SPSV
Response: ESTA
Response: AUTH TLS
Response: PBSZ
Response: PROT
Response:211 End.
Status:Connected
Status:Retrieving directory listing...
Command:PWD
Response:257 "/" is your current location
Command:TYPE I
Response:200 TYPE is now 8-bit binary
Command:PASV
Response:227 Entering Passive Mode (64,237,58,43,145,153)
Command:MLSD
Response:150 Accepted data connection
Response:226-ASCII
Response:226-Options: -a -l
Response:226 18 matches total
Error:Connection timed out
Error:Failed to retrieve directory listing
I have restarted the FTP service serveral times but still It doesnt loads.
We have a video streaming server, sometimes the server gets really slow and when we digg into it, we see that the same ip is trying to download the same file many many times. for example i either run this command
netstat -n | grep :80 | awk '{ print $5 }' | awk -F: '{ print $1 }' | sort | uniq -c | sort -n | tail
or go to WHM and see the 'apache stats' and i see 100 http connections from the same ip, trying to download the same video 100 times,,,
what is this? is this some sort of attack? could that be 100 different people that use a proxy? or what is going on?