I installed XAMP and copied my entire site down and put it in htdocs. I can see the index page, but the page's links and css are broken.
My local site:
//localhost/libweb/
my production environment:
//sitename.edu
and the physical address on the box is:
f:inetpublibweb
On my server not works links www.server.com/cpanel and www.server.com/whm only ports www.server.com:2082 www.server.com:2086 how repair this?
View 2 Replies View RelatedWe were using the mailserver on our linux install, but have since changed over to an ms exchange server. With that I removed the mailserver and installed MSMTP relay only mailserver (SMTP client) option.
I configured the External SMTP Server settings under Tools & Settings / Mail with a valid email address password host name and port of 587. When I save it says settings saved.
Since doing this I have been unable to use the email link option for share files in the file share portion of my domain. When I try to select a user from the list to send the email to or even type an external email all I get is the error "Unable to send email".
When I checked the maillog file in /usr/local/psa/var/log, I get this error "Jun 20 15:42:59 u16271698 msmtp: host=smtp.1and1.com tls=off auth=on user=to@email.ca from=psaadm recipients=to@email.ca errormsg='cannot use a secure authentication method' exitcode=EX_UNAVAILABLE"
Where I have proper emails configured where I placed "to@email.ca"
How can I get this working with the MSMTP relay only mailserver (SMTP client) option installed?
Im having a problem where local authentication will not work when when the configured LDAP server is unavailble. When the ldap server is online I can authenticate fine against ldap and local file. However, when the ldap server is offline, I cannot authenticate with the user1 account. The browser just sits at a blank screen.
Ive searched a lot on this and found many examples, all very similar to my config below, but I still cannot failback authentication to local file when ldap is unavailable. Im running Apache/2.2.10. I have also tested this on 2.2.16 with the same results.
=======.htaccess==========================
AuthName "Server Access"
AuthType Basic
AuthBasicProvider file ldap
AuthUserFile /etc/apache2/htpasswd
AuthzLDAPAuthoritative off
AuthLDAPURL ldap://ldap.domain.com:389/OU=Users,DC=domain,DC=com?sAMAccountName
[Code]...
I'm trying to accomplish two goals: First, get "Pretty Links" to work on my local Wordpress instance; second, to set up a local domain for the site.I have a fresh install of Apache 2.4.6 running, and I'll I've done is enable the rewrite and vhost_alias mods. Nevertheless, here's my apache2.conf: URL....
I need to have AllowOverride set to All. This, I gather, allows .htaccess files within the subsequent directories to alter the apache config. To try one thing at a time, I'm accessing the site from localhost/var/www/dhae/Wordpress (foregoing the domain). I tried altering the 000-default.conf to oblige this: [URL] .... -- all I added was the <Directory> section. This didn't work, and neither did changing the AllowOverride to All in the apache2.conf.
I wondered if perhaps I needed something more specific to the directory, so I tried using my second goal to accomplish this. I wrote the dhae.conf: URL....
I've also added the following line to my HOSTS file:127.0.0.1 dhae.dev
This hasn't worked either. I've tried virtual host config stuff as much as I could find, and I'm just not having any luck. What I have even came from this site (URL....).
I can't get MAMP to work. I sadly uninstalled and AppZapped MAMP and reinstalled it. Now I can't get WordPress to install. I can make a DB on PHP MyAdmin but I get "not found" when I try the WordPress install. I can't get the PHP info? line to work either. How do you troubleshoot MAMP?
View 4 Replies View RelatedWe can no longer create a working subscription
Microsoft Windows Server 2012 R2
12.0.18 Update #26
After the creation of a subscription, DNS does not work properly.
The last successful subcription was created Sept 26, 2014.
I thought something ontoward had happened at first so attempted to delete the subscription and re-create.
On attempting to delete the subscription the following error is given
Error: Some of the selected subscriptions were not removed.
Unable to remove domain: Error during domain.com removeZone: dnsmng failed: Unknown error 0x80131509 (COM Interop Error 80131509, Description: System.InvalidOperationException: Operation is not valid due to the current state of the object. at System.Management.ManagementObject.Delete(DeleteOptions options) at System.Management.ManagementObject.Delete() at WMIMsDNS.Provider.DeleteRecordsByType(String zone, String type) at WMIMsDNS.Provider.DeleteZone(String zone, UInt32& serial)) at removeZone ZoneName = 'domain.com'Click to expand...
Noticed they have a High Availability version coming out soon and was wondering how dependable their products have been over time and how responsive their tech support are.
View 1 Replies View RelatedHas anyone successfully gotten Apache 2.2 and cPanel 11 running in production? I would love to have this setup.
I'm currently running cPanel 11.15.0-RELEASE with Apache 2.0.16 with no problems.
I would love to get Apache 2.2 running so I can actually utilize Ruby on Rails.
I would like to set up a quick and dirty mail server for my production machine.
Basically, I just need to send emails to myself when I'm testing php scripts that use mail(). My solution right now is to comment the instances of mail() out until the site goes live, which is a pain.
I'm on a Windows Vista(64) box, I'm running Apache2, PHP5, and MySQL5. What (free) mailserver could I use that has a relatively quick setup.
How I do put a website of a client that is in production and give them access it to view it while preventing search engines from indexing it? I had the production site on a sub domain but search engines would inevitably index it. I could a no-index robot text but if people had the domain, they'd still find it. I want to just put it on my server and the client can login with a PW and view the status.
View 3 Replies View RelatedAfter several issues with our shared hosting provider, I have decided to recommend we move our site to a VPS solution.
We are a video/media production house and although our actual site does not demand many cpu/memory resources, we have a huge need for ample disk space and FAST data transfers up and down.
We are constantly uploading video files for client approval, receiving files from animators/designers/etc., delivering files to clients, etc. and need FAST and RELIABLE hosting to accomplish this.
I may end up using a content management system for the site itself, probably Drupal, but our actual web content is minimal. Most of our traffic takes place behind the scenes as data transfer.
I simply don't have the bandwith onsite to run my own server, so I would like to try the VPS route. I don't think we have money to budget for a dedicated server.
One last question. Do any VPS solutions offer a media streaming server for Flash streaming?
Working on bringing up a new site and was looking to solicit some feedback regarding the optimum way to maintain build/production integrity.
I currently use FileZilla FTP client, set file override to trigger on size and do a bulk upload of the entire site.
The problem is that I need to exclude certain files and directories like the image directory and the configure.php etc. every time I do an upload.
I have used Dreamweavers development/production sync features for a client site in the past and that was very good.
I was thinking about writing my own script to do the maintenance work, but thought I would ask if there is a better way.
How do you all maintain your production/development synchronization?
For learning purposes, I'd like to purchase a switch to network at least 4 servers. Based on your knowledge of switches and the ones you currently use in production, could you recommend some switches that, while initially for development use, could be transitioned to production?
I'd like a switch that specifically isn't meant for home use, because a big part of the reason for purchasing it is to get experience configuring, using, and troubleshooting a production-quality switch that has anywhere from 8-32 ports.
For those of you that actually network 32 devices together in production, do you have one mega 32-port switch, or multiple smaller (e.g. 8-port) switches? What setup, in your experience, have you determined to be ideal?
What criteria are very important to consider when purchasing a switch that, as a newbie to this area, I may not have otherwise considered? Most resources on this topic give pretty basic information, but don't highlight the real 'gotcha' areas.
Have run through a bunch of threads on mod_proxy race conditions, possible causes, and potential solutions.
What is the status? Is there a fix for this, maybe in 2.4.7?
On 2.4.3 in production we literally have 10K errors in the past 2 months along the lines of:
Code : AH00898: Error reading from remote server returned by...
Application server (JVM webapp) issues no errors at the time of mod_proxy error occurring. It seems then that mod_proxy is sporadically broken, which is horrible for end users accessing an otherwise rock solid production application.
I'm not sure if i posted this in the right place - but couldn't find a better place. Here is my problem.
I am converting my current site [URL] ... from one software to another. I am testing it on a temporary domain name [URL] .....
Once i finish testing i want to move the .co site to the .com site and i don't know the best way to do this.
An obvious way would be to move all of the files and databases to the .com site after first deleting all of the files at the .com site. I would also have to do a few tweaks to the software to make sure it's pointing to the .com and not .co where iI tested.
but this method seems clunky.
Is there a way to just point the .com to the .co when I'm ready to 'move' and therefore nothing would actually get 'moved'?? both the .com and .co are on the same VPS.
The 2848's can be had at pretty good prices these days. Don't think I'll be needing any fancy features out of these guys aside from vlaning, spanning tree, port channeling and some other basic commodities -- all of which should be cake for this switch.
I was going to pickup some 2950's, but considering these are only ~600 each in most cases..might as well.
I have two servers - one serves dynamic content (PHP) and the other serves static content (images and other files).
The PHP needs to have access to the images and files on the other server so at the moment I execute SSHFS manually to mount a directory containing the contents of the remote server. Permissions are set up so PHP can access and modify the images and files as if they're local files.
This works fine until the server needs restarting or network problems occur. I'd like to rectify this by using an daemon auto-mounter to make sure the directory is remounted if it ever becomes unmounted for any reason, including after a server reboot.
I understand that SSHFS is solid and secure, and both AFUSE and AutoFS offer suitable auto-mounting functionality, but I can't find any solid information on how suitable AFUSE or AutoFS are for a production server - my main concern being whether it's going to cause some unforeseen security issues.
Is AFUSE or AutoFS suitable for a production server?
I want to create a testing environment that is a miniature replication of a full production environment for a web service. From what I understand I'll need three components:
1. A web server
2. PIX firewall
3. DB server
Is there anything else I'll need or anything else I should be mindful of? Looking forward to insight/feedback.
When I go through my AWStats under "Links from an external page (other web sites except search engines)" I see several domains that have linked to me. When I visit these sites they are generally porn and drug sites that do not contain a link. Some of the sites redirect you to other sites. When you look up these domain names they are all from Russia.
These sites account for mulitple hits as high as +14.5%. These sites do not represent the content on my sites.
My questions are.
How do I stop this? I have found banning IP addresses does nothing.
How are they doing this?
Can this lead to your site being blacklisted?
My company hosts our primary website on a Linux box. We link to a third party for term life quotes. The quoting server is going down this weekend and I need to change the links to their page to one on our site. Unfortunately, our content management server is also down while we re-organized our network.
I have SSH access to the live server. Can someone tell me how to search for a specific href in files under the document root and automagically change them all? It would save me the time of finding each one and changing it by hand.
I have a linux sserver. And I mount a drive from a windows server. The mount point is /mnt/winmirror.
I make 2 test folders, test1 and test2 under /mnt/winmirror. Then I create a symbolic link in test1 to test2. In -s /mnt/winmirror/test2 linktotest2.
But there is an error message:
ln: creating symbolic link `linktotest2' to `/mnt/winmirror/test2': Operation not permitted
Any body know why I can't create symbolic link in this situation?
have a few different list of links in my link section for eg one page i give people links to about 20 or so games company where they can buy from. another has a small list of forums people can join eg, another list of places that i shop at.i do not have any reciprocal links with any of them and only included them cos i thought it would be handy for my readers. now can i leave the links or should i take it all off because all these external links would not help in my pr? there seems to be so many conflicting opinions
how many external links can you have in a page before it's bad for you.
idea to just use robots.txt on all these pages to be on the safe side?
I have an SSL cert installed to have a secure commerce area. Some of the pages have external links to non-secure sites like say [url]The padlock icon breaks and warns that there's unauthorized content. The hosting provider says it's because the external links need to be https links. Obviously that can't be done to a non-secure external site.
So the question is: do external http links break security on a secure https page? If so, is there a work around other than removing external links?
I'm creating a site similar to slickdeals & bensbargains and I'm trying to find a script that I can integrate into my text editor (tinymce.moxicode) that will create a tiny url as well as the redirect page automatically using php & mysql.
Looking at the following mouseover link from slickdeals:
slickdeals dot net/?pno=6999&lno=1&afscr=1
where it always starts with slickdeals dot net/
?pno=6999 each deal added gets a +1 to this number. The next deal would be 7000.
&lno=1 each link within a particular deal. Where the first link to the deal is lno=1, the next link (rebate) would be lno=2, etc.
&afscr=1 I'm not sure what this is for, I moused over a bunch of their links and they are all =1.
But the bottom line effect is that when you click on one of their links, it brings you momentarily to a blank page and then bestbuy dot com/etc/etc/etc comes up. The user never sees the funky affiliate link.
The best I've found so far is gentlesource dot com/short-url-script/
One of the machines we have at LW crashed 2 weeks ago.
we use relative links for pages and images throughout our site, but now in the new machine, every relative link request gets sent to HTTPS instead of a regular HTTP request.
I have to redirect all the links from http to https.
IS there some setting on IIS.
SSL is installed on server.
tried to download files from http links to my ftp server. i looked all over the forums but could not find any services. google spitted out this one. [url]Well, it really does help to upload http links to an ftp server and move files from one ftp server to another. does anyone know other services or free scripts that help to do this?
View 0 Replies View RelatedA dynamic php+mySQL site was converted to a static html by mirroring (wget). The result was that each page became an html file named some-page.html
View 4 Replies View RelatedIn my personal website at URL.... I have the top like 'index.php?pg=profile', 'index.php?pg=home' or 'index.php' (without any querystring), 'index.php?pg=diary' etc. I am looking to see if I can have .htaccess file which can make me create links like
index.php/
index.php
index.php/home
index.php/profile
index.php/diary
write an .htaccess for the same?
