Does anyone know if it is possible to implement DKIM (DomainKeys Identified Mail) on a Linux server that uses cPanel/Exim? I am interested in getting this implemented but not sure how, or if it's even possible yet on my setup.
On of our clients use an MS Exchange 2003 SBS server, with exchange for their internal email. We provide them with a domain, ADSL (which uses dynamic DNS) and POP3 email. They don't have an spam filter program on the exchange server itself due to costs, so I have setup each user on the Exim server, which runs ASSPX for anti-virus / spam filter / etc.
Then I setup the SBS 2003 server to pull the email via POP3, but this doesn't seem to work too well, cause the exchange server doesn't always download the POP3 email, and then the users often sit without email until I go there to manually download the mail again.
I have tried changing the MX record to point to their DynDNS address, and it works well, but then they get a lot of spam. And the cost of a server-side spam solution is just too expensive, and they also pay for the bandwidth uses when spam comes in. So, I moved their MX record back to the Linux server. But now I sit with the problem of the POP3 connector failing from time to time.
So, I would like to know, is there a way to "push" (not forward) mail from the Linux server, after it has arrived and spam been blocked, to another domain, but with the same email address? i.e. the domain in question is attorneys.co.za and I've setup attorneys.dyndns.net as the dynamic domain, but the exchange serves email for attorneys.co.za Forwarding email doesn't work, since there's no such user as bob@attorneys.dyndns.net, but rather bob@attorneys.co.za.
I can receive emails from qmail but couldn't send out any... I checked my mail logs and found:
Nov 14 17:53:20 server relaylock: /var/qmail/bin/relaylock: mail from 11.22.333.444:37277 (server.domain.com) Nov 14 17:53:23 server qmail: 1163498003.114915 delivery 708: failure: 11.22.333.444_does_not_like_recipient./Remote_host_sai$
Nov 14 17:53:19 server qmail-queue[11421]: mail: all addreses are uncheckable - need to skip scanning (by deny mode)
11.22.333.444 is my server ip. Why Do I got this error and how to fix it?? Anyone help please greatly appreciate.
I want to run a script that will loop through all of the domains on a particular server and remove all MX records with mail.*.I am testing on a single test domain at the moment but I'm not sure how to do the wildcard./usr/local/psa/bin/dns -d example.com -mx '' -mailexchanger mail.*
The following example command is from: URL....To add an MX resource record mail3.example.com specifying domain name mail.example.com as the mail exchanger for the record, and setting the mail exchanger's priority to the DNS zone on the domain example.com to 15:
# ./dns -a example.com -mx mail3 -mailexchanger mail.example.com -priority 15..What does the mail3.example.com got to do with it? Isn't it just adding a MX record mail.example.com?
I have just got a Dedicated Server and everything is running fine except the mail (outbound). Some times it sends mail fine but most of the time I am getting a bounce back stating the address cannot be found (Which I know is untrue because it is my main email address). It is not only happening on my address but a few others I have checked as well.
Here is what I get when I get a bounce back
==========================================
Could not deliver message to the following recipient(s): ......
i am getting error when i trying to send mail out to external email address like gmail, hotmail, msn, yahoo
The error says 550 invalid recipent : user@domain.com
so to make sure that the mail server is working i tried sending mail to local address which is local@nameoftheserver.com it works but when i try to send mail to external address it get error listed above.
so i added my email sales@domainname.com to gmail to test whether the mail server is working correctly from gmail i can send email from sales@domainname.com and recieve both but when i try that from my server it doesnot work
my server is offshore and i am using enom mail server to send email?
What is Linux command for compressing all the files under a Directory, as well as all the files in sub-directories under that directory, so that upon uncompression the files are created in the right directory and sub-directory.
Also of course what is the command to un-compress this compressed file?
In case: the Linux OS here is Redhat Enterprise and the web server is Apache.
how I might be able to execute a Linux command by sending a text message to some email address? Where if that email address gets a message (either any message, or perhaps only messages containing some password), a Linux command is executed, e.g.
I am wondering is there any software could offer auto complete feature for linux command? most linux need enter lots of parameters, if there is such a tool, that could be cool & great.
i have to delete all PTR records in over 80 domains in a Plesk 12 panel, when i tried to run the dns command to remove the PTR record from a domain, i got the error :
Code: Unable del record in DNS server: unable find DNS record ...
There is a KB article about this specific problem : [URL] .... , but it refers to older Plesk versions (8.x-10.x). I gave it a shot by copying the fix file from all 3 different versions to /usr/local/psa/admin/plib/api-common/ and i got the following PHP errors:
Code:
PHP Warning: include_once(class.PHostingManager.php): failed to open stream: No such file or directory; File: /usr/local/psa/admin/plib/api-common/cuDns.php, Line: 4 PHP Warning: include_once(): Failed opening 'class.PHostingManager.php' for inclusion (include_path='/usr/local/psa/admin/plib:/usr/local/psa/admin/externals'); File: /usr/local/psa/admin/plib/api-common/cuDns.php, Line: 4
[URL] ......
Is there any workaround this PTR issue? Also, is Parallels going to update the article and provide solution for Plesk 12?
Up till the last update Plesk was working correctly. After the latest update I can't send out mail in any form:
webmail, pop3, wordpress forms, etc.
This is the error message I get:
Command died with status 100: "/usr/bin/spamc". Command output: Mail handler 'limit-out' said: REPLY:554:5.7.0 Your message could not be sent. The user spamfilter is not allowed to send email.
When I reverted back to the last snapshot before the update everything works fine again. But the automated update bot messes it all up again when it downloads the newer version.
I just upgraded my Plesk 11.5 on Plesk version: 12.0.18 Update #9 , and after the upgrade the Postfix stop working. And forwarding, receiving is not working at all and I am getting message bellow.
I'm using this script as a cron to generate DKIM keys for the domains I have. It's an easy script. And it does it's job just OK. I have the necessary software installed and configured.
The way it works is:
The script check if the domain in queue has a record for it. If it doesn't, OpenDKIM generates a one time DKIM record for mail._domainkey that I am entering to my dns records for all the domains I have.
After creating the DKIM record, it checks and deletes mail._domainkey records if there's any. Then adds the generated DKIM to plesk dns zones and disables/enables greylisting to create the appropriate dns entry.
If it does have a DKIM recors on the hdd already, then it removes
mail._domainkeyand TXT o=-entries.
After that it basically adds the already generated DKIM record and it disables/enables the greylisting for each domain in order to recreate "TXT o=-"
Up till here, it works fine. I can see these entries when I check the DNS Settings. They are there.
But whenever I run this script either via cron or manually, I get an error message on my panel: (You can check the screenshot as well)
Code:
Warning: The DNS zone was modified. If you would like to apply DNS template changes to this zone, either click the 'Apply DNS Template Changes' button on this page or choose the 'Apply the changes to all zones' option in Server Administration Panel > Tools & Settings > DNS Template Settings > Apply DNS Template Changes.
And unless I manually click "Apply DNS Template Changes" for EVERY SITE it doesn't go away.
So, I was wondering, is there a way to scriptize that command? Or how to prevent it?
This is the command I use to generate DKIM and add it to Plesk database, also if any such record exists, delete and re-write it:
Is there a command line way of removing Plesk backups?
I'm looking for the command line equivalent of these steps: Log into Plesk as the server admin > "Tools & Settings" > "Tools & Resources" > "Backup Manager" > check a backup and click "Remove".
We have a script that copies the contents of "/var/lib/psa/dumps/" to Amazon S3 for long-term storage of backups. It runs nightly after a scheduled Plesk backup. Once that script completes successfully, we'd like to delete the Plesk backup to free up disk space. We have Plesk's "Maximum number of backups in the repository" set to 1.
But Plesk appears to keep that backup around while creating a new backup (which makes some sense). This is causing us trouble because the server does not have enough disk space for two backups. As a temporary solution, I'm manually deleting the backup each day through the Plesk admin, but would like to automate it if possible. If automation is overly complex/risky, we'll look at upping our disk space instead.
Details: Doing restart of Parallels Installer... File downloading products.inf3: 100% was finished. File downloading plesk.inf3: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% was finished. File downloading ppsmbe.inf3: 17%..26%..37%..47%..57%..78%..88%..100% was finished. File downloading sitebuilder.inf3: 22%..35%..48%..60%..73%..86%..100% was finished.
[code]....
ERROR: Currently installed version of product with ID 'plesk' is not available from download site anymore.Please upgrade to the next available product version to receive software updates.Seems like the RPM got damaged, but I already fixed that part, now when I put "install" I'm geting the following Installation started in background..Getting bootstrapper packages to installation list:
Following bootstrapper packages will be installed: (empty) ---------------- Getting packages to installation list: Following packages will be installed: (empty) ---------------- Loaded plugins: fastestmirror
Patch for plesk 12.0.18 will not be installed since it is already applied.Error: You already have the latest version of product(s) and all selected components installed. Installation will not continue.HOWEVER the "mail" and mail server configuration no longer shows in "tools & settings".
We have a plesk server running on a Ubuntu 14.04.2 LTS machine. We check the state of the mailqueue with nagios, executing the "mailq" command. After the AutoInstaller upgraded our installation from 12.0.18 update 38 to 39, we noticed, that the nagios check failed.
After investigating a little bit, it seems that we found the problem:
When I enter "mailq" in the shell, the command is executed and gives me an proper output. But when I try to execute the command with its full path "/usr/bin/mailq" nothing happens, and I have to cancel with [ctrl]+[c]. The which-command delivers exactly the same path as written above...
I have a subscription and I'm able to switch the subscription to a given service-plan, but I'm unable to sync the subscription with the plan, using the CLI. These are my commands:
result => The subscription <domain.com> is now associated with the service plan Hosting..When watching the webinterface in Plesk, I see the domain is "connected" to the service plan, so far so good. However, I notice that the subscription is not synced.
Back to the CLI, I've tried some combinations, but I can't get the subscription synced. The webbased interface keeps telling me that the subscription is unsynced. Here is what I've tried:
And I also unlocked it (just in case it was locked) like so: /usr/local/psa/bin/subscription --unlock-subscription <domain.com>
The funny part is that the CLI tells me: "Subscription <domain.com> was synchronized with the associated service plans." but unfortenately it's not if I look through the GUI. Only if I click the sync-option webbased the subscription get synced. we have to transfer over 1000 domains and need to sync these domains with a given service-plan.
