I have a laptop and redhat box. The laptop has wireless card and connected to internet using wireless router. Can I connect to redhat box to laptop using cross over cable and use internet? If so, how can I do it?
View 2 RepliesI have a Linux Server (CentOS 4.4) running, it has two network cards.
1. Onboard 100MBit (eth0), uses DHCP to obtain IP, this card is the only one that is able to connect to the internet.
IP: 192.168.1.13
Subnet: 255.255.255.0
Gateway: 192.168.1.1
Bcast: 192.168.1.255
2. PCI Gigabit card (eth1), uses static IP, and is connected to my Windows machines via a CROSSOVER cable.
IP: 192.168.2.2
Subnet: 255.255.255.0
Gateway: NONE
Bcast: 192.168.2.255
Before I installed the gigabit card all internet was working fine. However now i cannot even ping? here is some more info:
PHP Code:
[root@node home]# ifconfig eth0
eth0 Link encap:Ethernet HWaddr
inet addr:192.168.1.13 Bcast:192.168.1.225 Mask:255.255.255.0
inet6 addr: fe80::213:20ff:fee9:69de/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:473 errors:0 dropped:0 overruns:0 frame:0
TX packets:462 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:60513 (59.0 KiB) TX bytes:497973 (486.3 KiB)
[root@node home]# ifconfig eth1
eth1 Link encap:Ethernet HWaddr
inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::20c:76ff:fe7d:46/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:15996232 errors:0 dropped:0 overruns:0 frame:0
TX packets:7250441 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1137563077 (1.0 GiB) TX bytes:437192485 (416.9 MiB)
Interrupt:177 Base address:0x2f00
[root@node home]# netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.39.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet1
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
172.16.123.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet8
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1
[root@node home]# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.39.0 * 255.255.255.0 U 0 0 0 vmnet1
192.168.2.0 * 255.255.255.0 U 0 0 0 eth1
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
172.16.123.0 * 255.255.255.0 U 0 0 0 vmnet8
169.254.0.0 * 255.255.0.0 U 0 0 0 eth1
[root@node home]#
Im sure its just a few lines I need to change somewhere, just not sure where?
Has anyone worked with the cable companies on internet connections for hosting? Eg. Comcast, TW.
I worked with a sales rep for Comcast a few years ago on a solution for our offices. He worked out a line that would give us 3+mbits up speed for less then the price of a T1.
It also included a dedicated line to our offices. Would using a cable line be a bad idea for a hosting connection?
I'm having a hard time finding a source that has the Supermicro CBL-0084L splitter cable in stock. Any suggestions where I could get my hands on about 10 to 20 of these at a reasonable price? Maybe more if the price is right.
View 4 Replies View RelatedI have had a few Colo and Dedicated servers but I have decided that the traffic I am getting on my sites warrants using a large setup so I have four servers that I need to colo to one site.
My major question is that when I go colo they generally only supply one Cat 5 cable and what is the best setup to have for a switch/router? Generally you get enough IP addresses to have one per server so my guess is that you can just plug the switch/router in and away you go?
I am going to have one server as a load balancer then two as the load balanced pair and then a database server.
SoftLayer recently added TW Cable to their BGP mix. However, it is Time Warner Cable, while the ones I usually see is TW Telecom.
View 12 Replies View RelatedWe are looking for new network cable labels...
Perhaps something like this:
[url]
What distributor are you guys using for cable management?
I know typically at least CAT5 cable is to be used for FE or Gig-E Ethernet links, but can CAT3 cable be used at short distances? I know there is little to none cost difference in the cable price, but I am only allowed to used the preinstalled cable at this location which is CAT3 which is what Verizon typically runs for telephone cables.
View 14 Replies View RelatedSo we have 10 racks of mess in our custom colo cage. Each rack currently has 20+ servers, most with dual network interfaces hooked up, most racks with two switches and 3+ apc remote power strips per rack. Each rack is an APC 4 post unit [url]
We have no cable management trays and currently tie up cables with velco and zapstraps, trying to keep power cables to the left and cat5 cables to the right. Unfortunately, even with all our effort, it's really turning into a wall of cabling that is basically insulating each rack and causing a temperature issue (or the potential for one at least).
Even worse, we want to add in KVM over IP hooked up on nearly every server. While I see the great benefits of the KVM, I can't see how on earth we are going to make the cabling work out!
i was trying to search for reviews on time warner cable and was not able to find any. I would like to hear from ppl using it like what is the quality of bandwidth and what is their pricing structure.
View 14 Replies View RelatedI put this in the co-location section since I am co-locating a server that I host a few Websites on. The server is located in the Pacfic Northwest at a hosting company out there. As you may know, this is a "more remote" area of the United States.
Today, the company lost all Internet access when a Fiber optic cable went down. Not only was my stufff down but the entire hosting company was down. In 10 years of doing Internet development, I have never seen this happen to any hosting company I have worked with no matter how good or bad they were. On top of that, it happened one time last year as well.
According to my co-location provider, the problem happened a long way up stream. SO far that the lines cannot be backed up. Is this true? Could a fiber optic cable fail at some point where it cannot be switched over to another line?
I don't know if I should I believe that or not. It would seem to me that it is a matter of money and they may not have a back-up system in place if the pipe goes down. Is it possible? Who's fault is it?
Should i use a filber cable line for hosting server?
and which methods to security my hosting server such as : which Firewall, ANti-virus, ..?
if anybody know the cable pin out on making a console cable using those serial adapters?
View 1 Replies View RelatedCan I just get a DSL line or a cable modem and host the site or my own computer?
View 14 Replies View Relatedif anyone have experience with remote MySQL server setup
I have 2 servers in the same datacenter, 1 serve as web server, and 1 serve as mysql server.
would my remote MySQL server slows down my site load if it's not connected through cross cable? it's on the same datacenter though
Like the title says it: Is there anywhere in the bay area where I could colo a box and get a cable tv feed without paying an arm and a leg? Nothing illegal going on here either
View 0 Replies View Relatedis to use windows authentication, to connect to the site, and connect to MS SQL with the same user.
I read on the net (http://msdn.microsoft.com/en-us/library/ms998358.aspx), and it said I should go to my default sites properties, to to the "directory security" tab, and make sure "Integrated Windows authentication" is the only box that is checked.
I did that and now I cant connect to my site...
When I try to connect, it bring up a windows user name and password box. I put a user name and password in, but nothing...
Iv double checked the user exist, and still nothing...
I REALLY REALLY need to connect to my FTP on 1and1 and for some reason it seems to be down. Is anyone else having this problem?
View 2 Replies View RelatedThis week connectswitch's service has not been that good. Basically first they restart the node without prior notice and our vps was down for 7 hours. and now we buy our cPanel license via them and they havent paid it so the license is now expired although we have paid them for it.
View 11 Replies View RelatedWe can't resolve any outside websites, for example wget won't resolve any websites.
elvis:~# wget [url]
--2009-07-30 03:12:15-- [url]
Resolving g-ecx.images-amazon.com... failed: Temporary failure in name resolution.
wget: unable to resolve host address `g-ecx.images-amazon.com'
elvis:~#
How can we debug this? Its just started to do this, before it was fine for months.
We can resolve IP addresses fine.
elvis:~# wget [url]
--2009-07-30 03:18:08-- http://206.251.77.82/~proxy/images/b...ntent-view.png
Connecting to 206.251.77.82:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 241 [image/png]
Saving to: `background-content-view.png'
100%[======================================>] 241 --.-K/s in 0s
2009-07-30 03:18:08 (63.8 MB/s) - `background-content-view.png' saved [241/241]
elvis:~#
i am searching a VPS to connect Thailand users
its need very fast link and good ping
its for real time multimedia ( i try to avoid LAG in sound)
windows as a preference but linux can do
I dont need a lots of CPU or RAM cpy of 233mhz and ram of 256m is enought
put the connectivity is crucial full dubplex 100mbps and 500G of bandwith as a minimal
any clue where i can find this litle jewel
now i am using one who use tiscali as the provider its works fine the VPS is ok but its dont connect well all my poeples
so i am looking to change it
I'm getting a cabinet colocation with a provider and on the sales order there is a setup and re-occurring fee for "cross connect". My rep explained it's for the connection from my cabinet to their switch. Is this a typical charge for colocation? I thought cross connect is for connecting from their facility to 3rd party providers.
View 13 Replies View RelatedI got my dedicated server on centos ... everything is running, how to remotly connect
I already tried putty but there are some problems. My hosting provider give me this details:
root / Admin Password: xxx
DRAC-ip-user-password
and APC IP.
So which program is the best for remote connect?
how to setup an iPhone to access a mailbox hosted with VPS?
View 0 Replies View Relatedi runnig backup, after runing backup, i can not connect to whm cpanel
show this error:
In order to access the interface, you will need to make sure that the software license on this server is active and installed.
Your license could not be activated because:
Cannot Read License File
I can't connect to CPanel or any of my sites but I can connect to my virtuozzo control panel. When I try to connect to CPanel or any of my sites I get an error that says that the server is taking to long to respond.
If I go through a proxy I see the sites so I know CPanel is not down.
How is it possible to connect to my Virtuozzo control panel but not Cpanel?
We're having a small problem with one of our Ventrilo boxes (Linux) that seems to be blocking users from connecting. The DC (The Planet) is reporting that the issue is likely with the user and my tech is also saying the same thing. I have reason to believe they're both wrong but wanted to see if anyone had any ideas.
Here are 3 tracert's that show normal activity until the user reaches the DC network and then they can't reach our server.
All 3 of these are from different users experiencing the exact same problem.
Tracing route to ca.13.1343.static.theplanet.com [67.19.19.202] over a maximum of 30 hops:
1 2 ms 1 ms <1 ms 192.168.1.1
2 * * * Request timed out.
3 70 ms 72 ms 24 ms 68.86.105.193
4 127 ms * 13 ms 10g-9-3-ur02.longmont.co.denver.comcast.net [68. 86.103.157]
5 103 ms 87 ms 66 ms 10g-9-1-ur01.longmont.co.denver.comcast.net [68. 86.103.161]
6 12 ms 11 ms 12 ms 10g-3-1-ar01.denver.co.denver.comcast.net [68.86 .103.154]
7 9 ms 9 ms 23 ms 68.86.103.150
8 11 ms 12 ms 11 ms 12.125.159.89
9 45 ms 42 ms 33 ms tbr2-p013702.dvmco.ip.att.net [12.123.207.150]
10 31 ms 34 ms 126 ms tbr2-cl33.dlstx.ip.att.net [12.122.12.125]
11 145 ms 32 ms 31 ms gar1-p3100.dlrtx.ip.att.net [12.123.16.165]
12 38 ms 32 ms 31 ms 12.119.136.14
13 30 ms 34 ms 32 ms te7-1.dsr02.dllstx3.theplanet.com [70.87.253.18]
14 34 ms 32 ms 30 ms vl41.dsr01.dllstx4.theplanet.com [70.85.127.83]
15 59 ms 142 ms 48 ms gi1-0-2.car02.dllstx4.theplanet.com [67.19.255.1 34]
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Tracing route to ca.13.1343.static.theplanet.com [67.19.19.202] over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms 192.168.1.1
2 8 ms 7 ms 10 ms 73.96.20.1
3 9 ms * 7 ms GE-2-37-ur01.aberdeen.wa.seattle.comcast.net [68 .86.98.9]
4 9 ms 13 ms * te-5-2-ur01.olympia.wa.seattle.comcast.net [68.8 6.96.6]
5 11 ms * 12 ms te-8-4-ar01.burien.wa.seattle.comcast.net [68.86 .96.10]
6 14 ms 19 ms 14 ms 12.116.25.13
7 69 ms 69 ms 70 ms tbr1011401.st6wa.ip.att.net [12.122.111.6]
8 72 ms 76 ms 74 ms tbr2-cl10.sffca.ip.att.net [12.122.12.113]
9 73 ms 66 ms 67 ms tbr1-cl30.sffca.ip.att.net [12.122.9.137]
10 67 ms 68 ms 69 ms tbr1-cl3.la2ca.ip.att.net [12.122.10.26]
11 70 ms 67 ms 67 ms tbr1-cl20.dlstx.ip.att.net [12.122.10.49]
12 67 ms 68 ms 67 ms gar1-p340.dlrtx.ip.att.net [12.123.16.161]
13 65 ms 66 ms 65 ms 12.119.136.14
14 66 ms 66 ms 65 ms te9-1.dsr02.dllstx3.theplanet.com [70.87.253.22]
15 68 ms 67 ms 68 ms vl42.dsr02.dllstx4.theplanet.com [70.85.127.91]
16 67 ms 66 ms 66 ms gi1-0-1.car02.dllstx4.theplanet.com [67.19.255.6 ]
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
1 9 ms 5 ms 7 ms 73.101.80.1
2 7 ms 7 ms * GE-2-37-ur01.gigharbor.wa.seattle.comcast.net [6 86.99.9]
3 * * * Request timed out.
4 13 ms 9 ms 11 ms 12.117.243.13
5 64 ms 66 ms 64 ms 12.127.6.50
6 67 ms 67 ms 273 ms tbr2-cl10.sffca.ip.att.net [12.122.12.113]
7 67 ms 73 ms 69 ms tbr1-cl30.sffca.ip.att.net [12.122.9.137]
8 66 ms 66 ms 65 ms tbr1-cl3.la2ca.ip.att.net [12.122.10.26]
9 68 ms 64 ms 63 ms tbr1-cl20.dlstx.ip.att.net [12.122.10.49]
0 67 ms 70 ms 66 ms gar1-p340.dlrtx.ip.att.net [12.123.16.161]
1 70 ms 68 ms 67 ms 12.119.136.14
2 72 ms 69 ms 66 ms te9-1.dsr02.dllstx3.theplanet.com [70.87.253.22]
3 63 ms 65 ms 65 ms vl42.dsr02.dllstx4.theplanet.com [70.85.127.91]
4 69 ms 75 ms 69 ms gi1-0-1.car02.dllstx4.theplanet.com [67.19.255.6
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
0 * * * Request timed out.
I recently tried installing phpbb forum via fantastico and everytime I try I get the error "phpbb critical error" "could not connect to database"
I also get an error connecting to database when I try installing SMF.
I checked the configuration/information and the password and username is all correct.
I'm trying to cross connect two linux servers' secondary NICs with a cross over cable. after I pluged in the both ends, I tried to set internal ips for eth1 with netconfig, 192.168.3.1 and the other one is 192.168.3.2, i don't know what to put on netmask and gateway so I left it with netconfig's default, after that I tried ifup ifcfg-eth1 but the server lost connection.
The tech at the datacenter checked and said I delete their network gateway from the list of routes.
what should I do? remove the gateway line in ifcfg-eth1?
I am unable to connect to corehoster at all again --
I have been having issues since I opened my alpha master reseller account
Any reseller account I create cant create cleints..
I am even unable to enter tickets or send email to them since they are unreachable
Nick S refuses to refund my account .
Any one else having issues with core hoster
I install a Oracle Collaboration Suite portal on a Windows 2003 server.
I configure everithig to put it online. I cerate a dyndns hostname and I forwarded the 80 port on the router.
So, when I type the adress the portal appears but when I press on a link he redirects me on server.xxx.local.