Can't Connect To CPanel
I can't connect to CPanel or any of my sites but I can connect to my virtuozzo control panel. When I try to connect to CPanel or any of my sites I get an error that says that the server is taking to long to respond.
If I go through a proxy I see the sites so I know CPanel is not down.
How is it possible to connect to my Virtuozzo control panel but not Cpanel?
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Can Not Connect To Whm Cpanel
i runnig backup, after runing backup, i can not connect to whm cpanel show this error: In order to access the interface, you will need to make sure that the software license on this server is active and installed. Your license could not be activated because: Cannot Read License File
View Replies!
View Related
Connect Switch
This week connectswitch's service has not been that good. Basically first they restart the node without prior notice and our vps was down for 7 hours. and now we buy our cPanel license via them and they havent paid it so the license is now expired although we have paid them for it.
View Replies!
View Related
Can't Connect To Outside Websites
We can't resolve any outside websites, for example wget won't resolve any websites. elvis:~# wget [url] --2009-07-30 03:12:15-- [url] Resolving g-ecx.images-amazon.com... failed: Temporary failure in name resolution. wget: unable to resolve host address `g-ecx.images-amazon.com' elvis:~# How can we debug this? Its just started to do this, before it was fine for months. We can resolve IP addresses fine. elvis:~# wget [url] --2009-07-30 03:18:08-- http://206.251.77.82/~proxy/images/b...ntent-view.png Connecting to 206.251.77.82:80... connected. HTTP request sent, awaiting response... 200 OK Length: 241 [image/png] Saving to: `background-content-view.png' 100%[======================================>] 241 --.-K/s in 0s 2009-07-30 03:18:08 (63.8 MB/s) - `background-content-view.png' saved [241/241] elvis:~#
View Replies!
View Related
Cant Connect To IIS
is to use windows authentication, to connect to the site, and connect to MS SQL with the same user. I read on the net (http://msdn.microsoft.com/en-us/library/ms998358.aspx), and it said I should go to my default sites properties, to to the "directory security" tab, and make sure "Integrated Windows authentication" is the only box that is checked. I did that and now I cant connect to my site... When I try to connect, it bring up a windows user name and password box. I put a user name and password in, but nothing... Iv double checked the user exist, and still nothing...
View Replies!
View Related
What Is Cross Connect
I'm getting a cabinet colocation with a provider and on the sales order there is a setup and re-occurring fee for "cross connect". My rep explained it's for the connection from my cabinet to their switch. Is this a typical charge for colocation? I thought cross connect is for connecting from their facility to 3rd party providers.
View Replies!
View Related
How Do I Connect To Centos
I got my dedicated server on centos ... everything is running, how to remotly connect I already tried putty but there are some problems. My hosting provider give me this details: root / Admin Password: xxx DRAC-ip-user-password and APC IP. So which program is the best for remote connect?
View Replies!
View Related
Clients Can't Connect To IP
We're having a small problem with one of our Ventrilo boxes (Linux) that seems to be blocking users from connecting. The DC (The Planet) is reporting that the issue is likely with the user and my tech is also saying the same thing. I have reason to believe they're both wrong but wanted to see if anyone had any ideas. Here are 3 tracert's that show normal activity until the user reaches the DC network and then they can't reach our server. All 3 of these are from different users experiencing the exact same problem. Tracing route to ca.13.1343.static.theplanet.com [67.19.19.202] over a maximum of 30 hops: 1 2 ms 1 ms <1 ms 192.168.1.1 2 * * * Request timed out. 3 70 ms 72 ms 24 ms 68.86.105.193 4 127 ms * 13 ms 10g-9-3-ur02.longmont.co.denver.comcast.net [68. 86.103.157] 5 103 ms 87 ms 66 ms 10g-9-1-ur01.longmont.co.denver.comcast.net [68. 86.103.161] 6 12 ms 11 ms 12 ms 10g-3-1-ar01.denver.co.denver.comcast.net [68.86 .103.154] 7 9 ms 9 ms 23 ms 68.86.103.150 8 11 ms 12 ms 11 ms 12.125.159.89 9 45 ms 42 ms 33 ms tbr2-p013702.dvmco.ip.att.net [12.123.207.150] 10 31 ms 34 ms 126 ms tbr2-cl33.dlstx.ip.att.net [12.122.12.125] 11 145 ms 32 ms 31 ms gar1-p3100.dlrtx.ip.att.net [12.123.16.165] 12 38 ms 32 ms 31 ms 12.119.136.14 13 30 ms 34 ms 32 ms te7-1.dsr02.dllstx3.theplanet.com [70.87.253.18] 14 34 ms 32 ms 30 ms vl41.dsr01.dllstx4.theplanet.com [70.85.127.83] 15 59 ms 142 ms 48 ms gi1-0-2.car02.dllstx4.theplanet.com [67.19.255.1 34] 16 * * * Request timed out. 17 * * * Request timed out. 18 * * * Request timed out. 19 * * * Request timed out. 20 * * * Request timed out. 21 * * * Request timed out. 22 * * * Request timed out. 23 * * * Request timed out. 24 * * * Request timed out. 25 * * * Request timed out. 26 * * * Request timed out. 27 * * * Request timed out. 28 * * * Request timed out. 29 * * * Request timed out. 30 * * * Request timed out. Tracing route to ca.13.1343.static.theplanet.com [67.19.19.202] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.1.1 2 8 ms 7 ms 10 ms 73.96.20.1 3 9 ms * 7 ms GE-2-37-ur01.aberdeen.wa.seattle.comcast.net [68 .86.98.9] 4 9 ms 13 ms * te-5-2-ur01.olympia.wa.seattle.comcast.net [68.8 6.96.6] 5 11 ms * 12 ms te-8-4-ar01.burien.wa.seattle.comcast.net [68.86 .96.10] 6 14 ms 19 ms 14 ms 12.116.25.13 7 69 ms 69 ms 70 ms tbr1011401.st6wa.ip.att.net [12.122.111.6] 8 72 ms 76 ms 74 ms tbr2-cl10.sffca.ip.att.net [12.122.12.113] 9 73 ms 66 ms 67 ms tbr1-cl30.sffca.ip.att.net [12.122.9.137] 10 67 ms 68 ms 69 ms tbr1-cl3.la2ca.ip.att.net [12.122.10.26] 11 70 ms 67 ms 67 ms tbr1-cl20.dlstx.ip.att.net [12.122.10.49] 12 67 ms 68 ms 67 ms gar1-p340.dlrtx.ip.att.net [12.123.16.161] 13 65 ms 66 ms 65 ms 12.119.136.14 14 66 ms 66 ms 65 ms te9-1.dsr02.dllstx3.theplanet.com [70.87.253.22] 15 68 ms 67 ms 68 ms vl42.dsr02.dllstx4.theplanet.com [70.85.127.91] 16 67 ms 66 ms 66 ms gi1-0-1.car02.dllstx4.theplanet.com [67.19.255.6 ] 17 * * * Request timed out. 18 * * * Request timed out. 19 * * * Request timed out. 20 * * * Request timed out. 21 * * * Request timed out. 22 * * * Request timed out. 23 * * * Request timed out. 24 * * * Request timed out. 25 * * * Request timed out. 26 * * * Request timed out. 27 * * * Request timed out. 28 * * * Request timed out. 29 * * * Request timed out. 30 * * * Request timed out. 1 9 ms 5 ms 7 ms 73.101.80.1 2 7 ms 7 ms * GE-2-37-ur01.gigharbor.wa.seattle.comcast.net [6 86.99.9] 3 * * * Request timed out. 4 13 ms 9 ms 11 ms 12.117.243.13 5 64 ms 66 ms 64 ms 12.127.6.50 6 67 ms 67 ms 273 ms tbr2-cl10.sffca.ip.att.net [12.122.12.113] 7 67 ms 73 ms 69 ms tbr1-cl30.sffca.ip.att.net [12.122.9.137] 8 66 ms 66 ms 65 ms tbr1-cl3.la2ca.ip.att.net [12.122.10.26] 9 68 ms 64 ms 63 ms tbr1-cl20.dlstx.ip.att.net [12.122.10.49] 0 67 ms 70 ms 66 ms gar1-p340.dlrtx.ip.att.net [12.123.16.161] 1 70 ms 68 ms 67 ms 12.119.136.14 2 72 ms 69 ms 66 ms te9-1.dsr02.dllstx3.theplanet.com [70.87.253.22] 3 63 ms 65 ms 65 ms vl42.dsr02.dllstx4.theplanet.com [70.85.127.91] 4 69 ms 75 ms 69 ms gi1-0-1.car02.dllstx4.theplanet.com [67.19.255.6 5 * * * Request timed out. 6 * * * Request timed out. 7 * * * Request timed out. 8 * * * Request timed out. 9 * * * Request timed out. 0 * * * Request timed out.
View Replies!
View Related
Could Not Connect To Database
I recently tried installing phpbb forum via fantastico and everytime I try I get the error "phpbb critical error" "could not connect to database" I also get an error connecting to database when I try installing SMF. I checked the configuration/information and the password and username is all correct.
View Replies!
View Related
Connect Two Servers
I'm trying to cross connect two linux servers' secondary NICs with a cross over cable. after I pluged in the both ends, I tried to set internal ips for eth1 with netconfig, 192.168.3.1 and the other one is 192.168.3.2, i don't know what to put on netmask and gateway so I left it with netconfig's default, after that I tried ifup ifcfg-eth1 but the server lost connection. The tech at the datacenter checked and said I delete their network gateway from the list of routes. what should I do? remove the gateway line in ifcfg-eth1?
View Replies!
View Related
CoreHoster :: Unable To Connect
I am unable to connect to corehoster at all again -- I have been having issues since I opened my alpha master reseller account Any reseller account I create cant create cleints.. I am even unable to enter tickets or send email to them since they are unreachable Nick S refuses to refund my account . Any one else having issues with core hoster
View Replies!
View Related
Portal Connect But Don't Work
I install a Oracle Collaboration Suite portal on a Windows 2003 server. I configure everithig to put it online. I cerate a dyndns hostname and I forwarded the 80 port on the router. So, when I type the adress the portal appears but when I press on a link he redirects me on server.xxx.local.
View Replies!
View Related
Best VPS To Connect Thailand
i am searching a VPS to connect Thailand users its need very fast link and good ping its for real time multimedia ( i try to avoid LAG in sound) windows as a preference but linux can do I dont need a lots of CPU or RAM cpy of 233mhz and ram of 256m is enought put the connectivity is crucial full dubplex 100mbps and 500G of bandwith as a minimal any clue where i can find this litle jewel now i am using one who use tiscali as the provider its works fine the VPS is ok but its dont connect well all my poeples so i am looking to change it
View Replies!
View Related
Vsftpd Running, Can't Connect From Outside
I have been pulling my hair out all day trying to fix this issue, which should be simple in theory. Basically in summary, vsftpd is running on the server, I can't connect to FTP from my own computer. I have tried many things, but right now the way it stands is my vsftpd.conf file has listen=YES. I did a netstat -pan, with a return of: tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 29984/vsftpd I can telnet/FTP into port 21 locally, so vsftpd is indeed running properly, but I cannot connect from the outside at all. I have also commented out everything in /etc/hosts.allow. At this point, I am out of ideas. And to top it all off, I'm on a tight deadline. Usually works out there way doesn't it?
View Replies!
View Related
Can't Connect To Remote Desktop
I signed up for a Win2k3 VPS account with 3dgwebhosting. I'm a newbie to Plesk and win2k3 so I spent the first day getting head around Plesk. I then logged into Remote Desktop only to find someone else had beat me. They'd hacked in and downloaded a mass email client, email stripper and obviously sent out spam from a 2mb text file of email addresses. I didn't spend long in Remote Desktop, but while there I switched on Windows Firewall, changed my admin login password and logged off. Now, 24 hours later, I can't get back in. I get the error - This computer can't connect to the remote computer. Try again..... I can still login through Plesk, FTP and ExpressionWeb. Is FW keeping me out of RD or has the hacker returned?
View Replies!
View Related
How Can I Connect More Than Server With One Domain
i want to know how EXACTLY connect more than server with one domain i will explain what i want [note : sites & ip all for example below] i have a site name [company name] is www.comanyname.com and i have two servers [client servers] with the following dns server 1# ns1.companyname.com pointed to ip 192.168.1.1 ns2.companyname.com pointed to ip 192.168.1.2 server 2# ns3.companyname.com pointed to ip 10.0.0.1 ns4.companyname.com pointed to ip 10.0.0.2 now i want to make a NEW domain name like www.companynamedns.com and i want this domain hold all client's servers [want to spilt the company dns of the client dns], like ns1.companynamedns.com ns2.companynamedns.com ns3.companynamedns.com ns4.companynamedns.com vip.companynamedns.com s1.companynamedns.com i can make any name server like i want, so the first thing it must to be all server's ip that i want to connect to the domain companynamedns.com in www A record and mx record too and if u ping to companynamedns.com every time it give you random ip [cuz i put www a record for more than server with same one domain name] so this way not very cleard for me and i want to know how can i add the www a record? should i create a dns zone in any server but this entry in one server in whm [note i use cpanel/whm]? and put the www A record with new domain name companynamedns.com for every time i get a new server like i add www A record this companynamedns.com 1 A 192.168.1.1 14400s companynamedns.com 1 A 10.0.0.1 14400s companynamedns.com 1 A 10.10.10.1 14400s companynamedns.com 1 A 11.11.11.1 14400s and mx record like this companynamedns.com 1 TXT v=spf1 a mx ip4:192.168.1.1 ip4:10.0.0.1 ip4:10.10.10.1 -all 14400s but how about the ns record? should i but all ns record in the dns zone in whm? [note : there is another company make this trick and he have alot of name server NS but i didn't see all registred in dns records only 2 NS for the site And pointed to one server only] so how can the client connect the the server with ns that the main domain name companynamedns.com already did't added the others NS in the dns zone like A client make the nameserver for his site is ns22.companynamedns.com ns23.companynamedns.com but the DNS Records for the companynamedns.com is ONLY s1.companynamedns.com s2.companynamedns.com so how the ns22 and ns23 working and it didn't even added in the dns zone in the main domain companynamedns.com maybe he add all the name server he want in the domain control panel in the child name server only not in the name server but i think it didn't work it must be add in the name server too i really going to be CRAZY for this this trick is the right way to connect more than server with one domain name i colored the thread to read and get my idea easy and i really need expert help me with that issue
View Replies!
View Related
How To Connect Virtual PC To Host PC
I've downloaded and installed the Microsoft Virtual PC image for testing IE6. The development copy of my website is on the host PC, running on Windows XP/Apache/PHP. I need to use IE6 on the virtual PC to view pages served up by Apache on the host PC. I know this requires networking them together, but I've no idea how to do that. I've installed the Microsoft Loopback Adapter on the host PC, and told the virtual PC it can use that adapter in the Virtual PC settings dialogue, but on the host PC the loopback adapter says "limited or no connectivity". (Before someone suggests it, I've been using MultipleIEs. Trouble is, you can't test printing with that - you need a proper copy of IE6.)
View Replies!
View Related
Shoutcast Customers Cannot Connect
i have problem with shoutcast accounts....i have some shoutcast servers in ports 8002,8004,8006,8008,8010,8012... every day some of the shoutcast server or all, goes down and the customers can connect by winamp...so as result i am always go to start the servers by myself...why these happening?why the servers are going down? is there an automatically way to start them when they stop?
View Replies!
View Related
Fail To Connect To Mailservers
I have this server with no control panel and dnsreport could not connect to mailservers on all my domains. But the server can send out emails because I'm receiving logwatch emails, etc. I'm also using dnsmadeeasy for my nameservers. Quote: ERROR: I could not complete a connection to any of your mailservers! mail.mydomain.com: Timed out [Last data sent: [Did not connect]] If this is a timeout problem, note that the DNS report only waits about 40 seconds for responses, so your mail *may* work fine in this case but you will need to use testing tools specifically designed for such situations to be certain. I tried adding the domains on /etc/mail/local-host-names and restart sendmail but the error is still there.
View Replies!
View Related
MySQL Can't Connect To Socket.....
I saw following error in some of my site in my server. Coppermine critical error: Unable to connect to database ! MySQL said: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111) or following error : Invalid mysql server connection Please help me how can I resolve this error ! /etc/my.cnf : [mysqld] datadir=/var/lib/mysql skip-locking skip-innodb skip-networking safe-show-database query_cache_limit=1M query_cache_size=16M ## 32MB for every 1GB of RAM query_cache_type=1 max_user_connections=200 max_connections=500 interactive_timeout=10 wait_timeout=20 connect_timeout=20 thread_cache_size=128 key_buffer=64M ## 128MB for every 1GB of RAM join_buffer=1M max_connect_errors=20 max_allowed_packet=16M table_cache=1024 record_buffer=1M sort_buffer_size=1M ## 1MB for every 1GB of RAM read_buffer_size=1M ## 1MB for every 1GB of RAM read_rnd_buffer_size=1M ## 1MB for every 1GB of RAM thread_concurrency=8 ## Number of CPUs x 2 myisam_sort_buffer_size=64M server-id=1 collation-server=latin1_general_ci [mysql.server] user=mysql basedir=/var/lib [safe_mysqld] err-log=/var/log/mysqld.log pid-file=/var/lib/mysql/mysql.pid open_files_limit=8192 [mysqldump] quick max_allowed_packet=16M [mysql] no-auto-rehash #safe-updates [isamchk] key_buffer=64M sort_buffer=64M read_buffer=16M write_buffer=16M [myisamchk] key_buffer=64M sort_buffer=64M read_buffer=16M write_buffer=16M [mysqlhotcopy] interactive-timeout My server details : 1 GB RAM P4 3.00 HT
View Replies!
View Related
How To 2 Cisco 2950 Switch Connect Together
I have 2 racks in a DC that cross connected together. Now, the datacenter gives me 1 port and I would like to put 1 switch at each rack. I have successfully set up 1 switch and connect to the internet. But, I am unable to set up the other. Below is a diagram of what I want to do: ...
View Replies!
View Related
Could Not Connect To Slave Node (hypervm)
Our master node unable to connect to slave node for create, rebuild, manage. But we can give access to slave with hypervm -> Servers and run anything on it. I checked firewall, also im stopped iptables. But master cannot connect to slave. Where is issue and how can resolve? Note: i can give ping or ssh access with both server to slave/master! Help me please. I have this when i run /script/upcp on main node: [root@server ~]# /script/upcp Getting Version Info from the Server... Connecting... Please wait.... hypervm is the latest version Executing UpdateCleanup. This will take a long time. Please be patient License Successfully updated vps backupdir exists... returning Updgrading Slave xx.xx.xx.xx... no_socket_connect_to_server
View Replies!
View Related
UK Users Unable To Connect To One Of My Websites
I've been getting a lot of complaints today on my forum that users cannot view their websites which are subdomains on a seperate domain that I own. It makes no sense why they would have access to the forums which is on the same dedicated server, using the same IP, and with the same nameservers as the site they cannot access. This issue started last night out of nowhere. Where should I even start looking? It appears to only be with overseas users since none of the US and Canadian users have any issues with either domains or their subdomains.
View Replies!
View Related
Windows Script To Connect Via SSH
How can I set up a script or shortcut to run commands from a Windows XP machine on my CentOS machine over SSH? I am running a virtual CentOS (VirtualBox) machine containing my LAMP stack. I also have other tools like subversion, git, etc. on there that I wish to use. On my windows machine, I want to set up quick scripts like 'commit' and send my path with args. I also want to use it for running command line PHP scripts on the remote server.
View Replies!
View Related
Users Cannot Connect To MySQL Via Phpmyadmin
It seems I am having issues with WHM/CPanel. I cannot connect to mysql via phpmyadmin through WHM as a root and get this error #2002 - The server is not responding (or the local MySQL server's socket is not correctly configured) All users get the same error when they try to access mysql from cpanel. The access seems to be only for valid for 192.168.1.% Would allowing access to localhost will help and how can I do that for all users?
View Replies!
View Related
Cannot Connect To Database ; Errno.: 2003
I'm having trouble to connect my site to the MYSQL server. The condition is like this: My site is running under 5 http servers and all are serve using a mysql server. Recently, I have changed the ip address of all the servers due to the ip migration at the datacenter. After the changes, all my http server having problem to connect to mysql server. It shows the error like below: Quote: Error: Can't connect to MySQL server on '123.456.789.2' (4) Errno.: 2003 However, I tried to establish a connection by placing the http file into mysql server. Only this site can be shown up correctly. Means, there's actually no problem with the Mysql Server. Can I know what's the problem actually? I guess there might be some setting of the mysql server blocking the connection from my other servers. Where do we normally do the setting for this? I'm quite new in server stuff and wish to get some advice from you all...
View Replies!
View Related
Unable To Connect Localhost(10061)
I am stuck in re-installing mysql server..... Everything I have removed even mysql service give reboot the machine but still not able to complete the installation. At the end I receive error " Can't connect to Mysql server with LocalHost (10061) By the way if port 3306 is not enabled in firewall can this issue be occurred because of this?
View Replies!
View Related
20% Of People Unable To Connect To My Site
I just switched to a new server last month and Im having a problem where a lot of my members and even some of my mods are unable to connect to my website. They are just getting a page cannot be displayed error. The website is ftascene(dot)com. Is everyone here able to connect to the site, and any idea why not everyone would be able to connect?
View Replies!
View Related
Unable To Connect With Wireless Router
I have not been able to connect to my server via browser, ftp or email since my server had a OS reload & security package installed. If I disconnect and remove my wireless router I can access the server directly from the modem. When the Linksys WRT54G is connected I can go anywhere on the net with no problems, except my server. Is there something they might have done at the server to block wireless router access? I get a timed out message when I ping any of the IP's on the server with the wireless router connected. Linksys has been of no help and I have talked with Clearwire who owns my modem.
View Replies!
View Related
MySQL Cannot Connect To Database Via PHP
I got this weird problem with my VPS which has MySQL 4.1.22 running on it. Everything works fine for sometime and then out of a sudden, it stop recognizing the mysql users and refused to allow my PHP scripts to access the database. It seems that I needed to restart mySQL server to resolve the issue. Then out of the blues, the same problem occurs. I am running Cpanel on a VPS and there isn't any overloading as the database access is pretty light on my 512mb VPS. I contacted my web host about the issue and it seems like all they do is to restart the mySQL. This cannot be a solution as it happens at least once or twice a day depending on how soon I could catch the problem. All the time this problem occurs, the MYSQL Server is still active and working. I can even access it through PHPMyAdmin but not through the scripts. I just added an hourly crontab so as to restart the MySQL server as a stop gap.
View Replies!
View Related
Connect To Windows VPS With Http
How can i connect to my windows VPS if my office PC connect to internet by http proxy (user name and password) and all ports are closed unless: 22 23 80 8080 So Remot desktop not working, I tryed some remote softwar like pcAnywhere but did'nt work.
View Replies!
View Related
Linux Cross-connect Routing
I have two RedHat EL 4 boxes linked via a cross-connect. One is a web server (10.0.0.3) and one is a mySQL server (10.0.0.2), the interface between them is eth1 on both machines and a second interface eth0 connects to the internet. I want to use the web server to send queries to the database server via eth1, 10.0.0.2:3306 in this case. If I send a database query via eth1 there is a delay of about 10-20 seconds before the result comes back. If I send the same query to the database server but use it's main IP instead of the internal IP so that the query is being sent to it over the internet (xx.xx.xx.xx:3306), the result comes back instantly. Similarly, if I send a query from any remote server the result is instant. Why should there be such a huge delay when sending a query directly through the cross-connect? The routing table ( ip route show ) for the web server is: xx.xx.xx.xx/xx dev eth0 proto kernel scope link src xx.xxx.xx.xx 10.0.0.0/24 dev eth1 proto kernel scope link src 10.0.0.3 default via xx.xx.xx.xx dev eth0 and the routing table on the database server is: xx.xx.xx.xx/xx dev eth0 proto kernel scope link src xx.xx.xx.xx 10.0.0.0/8 dev eth1 proto kernel scope link src 10.0.0.2 default via xx.xx.xx.xx dev eth0 I have ifcfg-eth1 on both boxes: DEVICE=eth1 ONBOOT=yes TYPE=Ethernet IPADDR=10.0.0.3 / 10.0.0.2 NETMASK=255.255.255.0 Both boxes can ping each other and transfer files using wget without any apparant problems or delays. Anyone have any ideas on how to fix this 10-20 second delay when sending queries through the cross-connect?
View Replies!
View Related
Telnet Can't Connect To Mail Server
I can't telnet to mail server. when I try # telnet mail.domain.com 25 Trying xxx.xxx.xx.xx... telnet: connect to address xxx.xxx.xx.xx: Connection refused telnet: Unable to connect to remote host: Connection refused but when it's # telnet localhost 25 Trying 127.0.0.1... Connected to localhost.localdomain (127.0.0.1). Escape character is '^]'. 220 mail.domain.com ESMTP it connects. I don't have a firewall
View Replies!
View Related
Users Cannot Connect To Remote MySQL Server
I have a few users that have a hosting account with me and are trying to connect to their own MySQL servers elsewhere. Both said that they are able to connect to the MySQL server with other hosting accounts but not the ones hosted with me. I asked if they had setup permissions to allow remote connections from my server and they confirmed that they did. What am I missing? Do I need to configure my firewall somehow? I figured the connection is just using port 80 since it's from an PHP script right?
View Replies!
View Related
Can't Connect To MySQL Server On 'localhost' (10055)
Do you guys know anything about this? My server works perfectly with INSERT, UPDATE, DELETE for mysql. but after like 12 hours later, my application crashes and I get this "Can't connect to MySQL server on 'localhost' (10055)" and I would have to restart my applications and everything will be working perfectly. Do you guys have any idea why this happen? I do have a lot of connections coming in and out of my server. Would that mean anything?
View Replies!
View Related
Warning: Fsockopen(): Unable To Connect To 127.0.0.1:25
Yesterday I had to install a renewed SSL Certificate. Managed to get it installed, in Plesk under domains/www_mydomain_com, but I also deleted the default SSL from the server/certificates area... So then I was getting an dns 500 error when browsingour site and I could not start httpd from within plesk. Went in through SSH and tried to start it from there and got and error stating it could not find the SSLCA cert it was looking for. So I edited my httpd.include file to point to my new certificate. Now http works, but my email has stopped? What gives how could the two be related! I can log into my webmail, compose message and when I send I get: Warning: fsockopen(): php_hostconnect: connect failed in /usr/share/psa-horde/pear/Net/Socket.php on line 108 Warning: fsockopen(): unable to connect to 127.0.0.1:25 in /usr/share/psa-horde/pear/Net/Socket.php on line 108 I have started and stopped psa, qmail. Rebooted the server. I tried the telnet localhost 25 but I get connection refused. Anytime I check qmail status it says stopped. Don't know if that is right or not. I know I am not recieving emails asI have sent many today through other accounts and they all come back undeliverable. We do run an online store as well so I am kinda nervous when our email goes down! Time to hire a server admin? I am running Plesk 7.5.4 on Red Hat 9 on a Virtual Dedicated Server with GoDaddy. Here is my "Component Info" from Plesk: bind 9.2.1-16 coldfusion-support 7.3-2.96.118 courier-imap 3.0.8-rh9.build75050824.12 frontpage 5.0.2.2634 httpd 2.0.40-21.17.legacy.1.swsoft mod_perl 1.99_07-5 mod_python 3.0.1-4 mysql 3.23.58-1.9 perl-Apache-ASP 2.57-rh9.build75050824.12 php 4.3.2-psa.rh9.1 psa 7.5.4-rh9.build75050824.12 psa-api-rpc 7.5.4-rh9.build75050930.11 psa-bu Component was not installed psa-horde 3.0.5-rh9.build75050824.12 psa-imp 4.0.3-rh9.build75050824.12 psa-logrotate 3.7-rh9.build75050824.12 psa-manual-custom-skin-guide 7.5.4-rh9.build75050824.12 psa-proftpd 1.2.10-rh9.build75050824.12 psa-qmail 1.03-rh9.build75050824.12 psa-qmail-rblsmtpd 0.70-rh9.build75050824.12 samba 2.2.7a-8.9.0.1.swsoft SSHTerm 0.2.2-rh9.build75050824.12 stunnel 4.04-3 webalizer 2.01_10-11
View Replies!
View Related
How To Configure A Firewall To Let Only Exim Connect Via Port 25
Alright now this is the most intelligent way to send spam I have ever seen. Apparently a guy has made a PHP or Perl script that is acting as an MTA. That's right: He is neither using Sendmail nor Exim but he made a script that acts as an MTA. That means the script itself connects to third party mailservers via port 25 and communicates with the remote mailserver as if it was an MTA itself. This works even if Exim is entirely disbaled... The spam still get's sent. The script is running only occasionally...not like a daemon. So it is nearly impossible to locate it. You have no Exim logs to look at. And in the Apache logs any PHP script could be it... You are not able to find that out. Therefore I am unable to stop him unless I manage to block outgoing connections to another host's port 25 for any program but for exim. How can I configure my firewall (APF) so that only Exim my connect to other servers via port 25? Is that even possible?
View Replies!
View Related
Connect To Mysql From Many Remote Virtual Hosts
I have a set up where server 1 holds a mysql DB and a virtual host. server 2 holds many virtual hosts in apache (16) connecting to this DB. The virtual hosts all hold the same script, but the single VH on server 1 receives about the same amount of visits as all the VHs of server 2. server 1 is very busy at times, like 100% CPU and a load around 10 for long period of times. server 2 is not very busy, around 30% CPU usage and 0.6 CPU load. Yet, users on server 2 experience *much slower* response times than the ones on server 1. The obvious reason could be the network between the two, but I'm not convinced (6 seconds for a query run from server 2 when it brings back 1 row and takes 0.01 second from server 1). I was wondering what other reasons it could be. The mysql processlist is weird: Code: mysql> show processlist; +-------+----------+---------------+----------+---------+------+--------------------+------------------------------------------------------------------------------------------------------+ | Id | User | Host | db | Command | Time | State | Info | +-------+----------+---------------+----------+---------+------+--------------------+------------------------------------------------------------------------------------------------------+ | 81817 | mysite | localhost | mysite | Sleep | 865 | | NULL | | 94992 | mysite | server2:47927 | mysite | Sleep | 188 | | NULL | | 96890 | mysite | server2:50881 | mysite | Sleep | 26 | | NULL | | 97213 | mysite | server2:51010 | mysite | Sleep | 22 | | NULL | | 97391 | mysite | server2:51085 | mysite | Sleep | 36 | | NULL | | 97919 | mysite | server2:51300 | mysite | Sleep | 49 | | NULL | | 97927 | mysite | server2:51306 | NULL | Sleep | 49 | | NULL | | 97933 | mysite | server2:51282 | mysite | Sleep | 48 | | NULL | 97933 | mysite | server2:51282 | mysite | Sleep | 48 | | NULL | | 97958 | mysite | server2:51321 | mysite | Sleep | 26 | | NULL | | 97961 | mysite | server2:51323 | mysite | Sleep | 46 | | NULL | | 98104 | mysite | server2:51344 | mysite | Sleep | 39 | | NULL | | 98169 | mysite | server2:51376 | NULL | Sleep | 36 | | NULL | | 98177 | mysite | server2:51388 | mysite | Sleep | 9 | | NULL | | 98365 | mysite | server2:51461 | mysite | Sleep | 26 | | NULL | | 98377 | mysite | server2:51427 | mysite | Sleep | 26 | | NULL | | 98380 | mysite | server2:51468 | mysite | Sleep | 6 | | NULL | | 98394 | mysite | server2:51474 | mysite | Sleep | 26 | | NULL | | 98404 | mysite | server2:51479 | mysite | Sleep | 26 | | NULL | | 98418 | mysite | server2:51486 | mysite | Sleep | 26 | | NULL | | 98419 | mysite | server2:51487 | mysite | Sleep | 26 | | NULL | | 98429 | mysite | server2:51496 | mysite | Sleep | 2 | | NULL | | 98503 | mysite | server2:51520 | mysite | Sleep | 22 | | NULL | | 98512 | mysite | server2:51524 | mysite | Sleep | 22 | | NULL | | 98514 | mysite | server2:51525 | mysite | Sleep | 20 | | NULL | | 98519 | mysite | server2:51526 | mysite | Sleep | 22 | | NULL | | 98557 | mysite | server2:51514 | mysite | Sleep | 21 | | NULL | | 98568 | mysite | server2:51548 | mysite | Sleep | 20 | | NULL | | 98581 | mysite | server2:51557 | mysite | Sleep | 5 | | NULL | | 98617 | mysite | server2:51572 | mysite | Sleep | 18 | | NULL | | 98620 | mysite | server2:51574 | NULL | Sleep | 18 | | NULL | | 98630 | mysite | server2:51577 | mysite | Sleep | 17 | | NULL | | 98644 | mysite | server2:51584 | mysite | Sleep | 17 | | NULL | | 98681 | mysite | server2:51601 | mysite | Sleep | 15 | | NULL | | 98698 | mysite | server2:51604 | mysite | Sleep | 14 | | NULL | | 98704 | mysite | server2:51606 | mysite | Sleep | 14 | | NULL | | 98714 | mysite | server2:51610 | NULL | Sleep | 14 | | NULL | | 98736 | mysite | server2:51619 | NULL | Sleep | 13 | | NULL | | 98748 | mysite | server2:51626 | NULL | Sleep | 12 | | NULL | | 98753 | mysite | server2:51628 | mysite | Sleep | 12 | | NULL | | 98785 | mysite | server2:51635 | mysite | Sleep | 11 | | NULL | | 98820 | mysite | server2:51654 | mysite | Sleep | 10 | | NULL | | 98821 | mysite | server2:51655 | mysite | Sleep | 10 | | NULL | | 98822 | mysite | server2:51656 | mysite | Sleep | 10 | | NULL | | 98823 | mysite | server2:51657 | mysite | Sleep | 10 | | NULL | | 98836 | mysite | server2:51660 | mysite | Sleep | 9 | | NULL | | 98840 | mysite | server2:51662 | NULL | Sleep | 9 | | NULL | | 98841 | mysite | localhost | NULL | Query | 0 | NULL | show processlist | | 98901 | mysite | server2:51680 | mysite | Sleep | 6 | | NULL | | 98903 | mysite | server2:51651 | mysite | Sleep | 7 | | NULL | | 98920 | mysite | server2:51684 | mysite | Sleep | 6 | | NULL | | 98947 | mysite | localhost | mysite | Sleep | 1 | | NULL | | 98954 | mysite | server2:51696 | mysite | Sleep | 5 | | NULL | | 99024 | mysite | server2:51710 | mysite | Sleep | 1 | | NULL | | 99031 | mysite | server2:51712 | mysite | Sleep | 2 | | NULL | | 99032 | mysite | server2:51686 | mysite | Sleep | 2 | | NULL | | 99041 | mysite | server2:51694 | mysite | Sleep | 2 | | NULL | | 99049 | mysite | server2:51717 | mysite | Sleep | 2 | | NULL | | 99058 | mysite | server2:51720 | mysite | Sleep | 1 | | NULL | | 99063 | mysite | server2:51685 | mysite | Sleep | 1 | | NULL | | 99064 | mysite | server2:51722 | mysite | Sleep | 2 | | NULL | | 99073 | mysite | localhost | mysite | Sleep | 1 | | NULL | | 99075 | mysite | server2:51724 | mysite | Sleep | 1 | | NULL | | 99086 | mysite | localhost | mysite | Query | 1 | Creating tmp table | SELECT DISTINCT * | | 99089 | mysite | localhost | mysite | Sleep | 1 | | NULL | +-------+----------+---------------+----------+---------+------+----------- Why so many sleeping processes from server 2, and none or almost none from server 1 ? Is it normal that every query from server 2 is open on a different port ? Should they be grouped by virtual host, or is there one different port for each script running concurrently? What could be a reason for server 2 having problems to open connections on server 1, and how to solve it? Right now I'm about to deport more users from server 1 to new virtual hosts on server 2, hoping it will lower the load on the first machine and overall accelerate the response times. I just thought I'd post here first because this all seems very weird to me and i thought someone with an external look might tell me what I'm doing wrong. And also if network would be the problem maybe that's not the clever thing to do to make more users remote.
View Replies!
View Related
Mail Server Taking Too Much Time To Connect
For some reason, one of the servers can't connect to my mail server. Whenever a user tries to send email from that server to my server, the message won't go through and I see the following in the logs (var/log/exim/mainlog): 2007-02-13 23:56:06 SMTP connection from (***.ca) [***.***.***.***] lost while reading message data (header) this problem occurs only with this ***.ca mail server (as far as I know). In fact, trying dnsreport.com tool on any of my server domains, I am getting the error message "ERROR: I could not complete a connection to any of your mailservers! ******.com: Timed out [Last data sent: RCPT TO: ] If this is a timeout problem, note that the DNS report only waits about 40 seconds for responses, so your mail *may* work fine in this case but you will need to use testing tools specifically designed for such situations to be certain.
View Replies!
View Related
Unable To Connect Via SSH With Centos5 X64
I have been struggling with a couple of new servers that we want to run Centos 5 on. For a second assume that is our desire so going back to 4.x isn't an option yet. Now while I mention Centos 5, the problem seems to be with PAM and x64. When trying to login to the server via ssh, the login succeds but then immediately kicks the user out. I have tried this with root and another user created. I have set the UsePam option to no to try to resolve this in sshd_config. On the H-Sphere forum I found this reference: [url] " if i try to connect with ssh and i enter the right password i get an error and ssh closes the connection. The answer already was in the ticket you opened: Quote: That is known bug dealt with PAM authentication. The bug was fixed for i386 systems long time ago. But it was not fixed for x86_64 architecture. We build FreeVPS kernel new version 1.5-13.1 for x86_64 architecture to fix the problem. We also installed the kernel into the box IP 64.71.227.16. Please reboot the box with the new FreeVPS kernel version: 2.6.9-freevps-1.5-13.1smp. Let us know the result." Does anyone know how to resolve this? A reinstall of PAM was attempted by a well known sysadmin here but to no avail.
View Replies!
View Related
Unable To Connect To Local Httpd Server.
When i go to my website or any page under the domain it's just white. Blank nothing, nada. "Failed to receive status information from Apache. Unable to connect to local httpd server." This error message appears when i click on "apache status". Is this because of the network issue? Or is it because of something I did myself? I did a google search and came up on some solution, I did them and nothing.
View Replies!
View Related
Remote SQL Connect Web Hosting
shared hosting for multiple websites, but I have some specific requirements: 1) Remote connections to a SQL database (using SQLCompare) 2) ASP.NET 2.0 3) A decent control panel to set things like subdomains up Other features such as disk space aren't as important to me. I'm just having trouble finding any hosting that allows remote connections. Right now I'm using godaddy and it's great... just no remote connections.
View Replies!
View Related
|
TRACKER
