Tracking Forums, Newsgroups, Maling Lists
Home Submit Tracker Forums
  Advanced Search
  HOME    TRACKER    Web Hosting

Advertisements: & have generously sponsored dedicated servers and web hosting to ensure a reliable and scalable dedicated hosting solution for

Fast Ping But Slow Collection

sometimes I can't open my site in browser

but I can ping the site very fast

what makes the problem? or please teach me how can I find the reason?

View Complete Thread with Replies

Sponsored Links:

Related Forum Messages:
Ping :: Is My Host Slow
I am hosting some sites with innohosting and it seems they are loading slow. This could be because of my internet so im not sure.

My ping is below. What is considered good?

64 bytes from icmp_seq=0 ttl=39 time=87.104 ms
64 bytes from icmp_seq=1 ttl=39 time=89.647 ms
64 bytes from icmp_seq=2 ttl=39 time=110.035 ms
64 bytes from icmp_seq=3 ttl=39 time=130.241 ms
64 bytes from icmp_seq=4 ttl=39 time=139.109 ms
64 bytes from icmp_seq=5 ttl=39 time=163.304 ms
64 bytes from icmp_seq=6 ttl=39 time=96.559 ms
64 bytes from icmp_seq=7 ttl=39 time=96.478 ms
64 bytes from icmp_seq=8 ttl=39 time=103.415 ms
64 bytes from icmp_seq=10 ttl=39 time=111.042 ms
64 bytes from icmp_seq=11 ttl=39 time=118.234 ms
64 bytes from icmp_seq=12 ttl=39 time=94.255 ms
64 bytes from icmp_seq=13 ttl=39 time=86.390 ms
64 bytes from icmp_seq=14 ttl=39 time=95.784 ms
64 bytes from icmp_seq=15 ttl=39 time=89.193 ms

I have a lot of sites with big graphics that need to load fast.

View Replies!   View Related
Decent Ping But Extremely Slow Download Speed
I have just gotten a new server and the ping results were pretty fine. However, when it comes to the download speed its horrible. What could be the issue?

View Replies!   View Related
15ms Ping Vs 40ms Ping Vs 170ms Ping
15ms ping vs 40ms ping vs 170ms ping

Which you think is still acceptable for a website?

View Replies!   View Related
VPS Incredibly Slow, Huge Numbers Of Slow MySQL Queries For Plesk/Watchdog
I've got 25 domains on a Virtuozzo/Plesk8.6/CentOS5 VPS. Each domain has one up-to-date install of WordPress, most have very little traffic (average 200mb per month), maybe 2 domains get 5-7gb traffic per month.

I monitor port 80 connections and rarely see more than 10 at a time.
That should in my opinion be no problem at all for a VPS with 768mb guaranteed ram and 2.4ghz cpu. I've got 30gb hard drive spare too.

But.... about 8 or 10 times a day it grinds to a complete halt: server load at 500-1000%, sites timing out, plesk takes 3mins to load, often I can't even connect with SSH, and the plesk web server, apache

INSERT INTO module_watchdog_sys_stat (time, type, value, service_id) VALUES(FROM_UNIXTIME(1226404705), 'MAINMEM_USAGE', 17472, 11);

80 seconds sounds like a huge amount of time for a MySQL insert to me! Does anyone know if this is likely to be the cause of my trouble? Some problem with Plesk and the database? Or could it be something else?

View Replies!   View Related
Can Ping But Cannot Go In
My server DC technician change the cable to another switch in another rack. all in sudden, my server went 'offline'.

the weird thing is,
I can ping the server IP

When I plug my KVM,
I can ping from my server

But when I lynx, it keep saying
HTTP requests sent; waiting for response._

When I open my putty and SSH, it keep waiting.

When I try to ssh from another server, it keep waiting
$ ssh
[nothing happen]
$ ping
PING ( 56(84) bytes of data.
64 bytes from icmp_seq=1 ttl=63 time=1.10 ms
64 bytes from icmp_seq=2 ttl=63 time=0.864 ms
64 bytes from icmp_seq=3 ttl=63 time=0.854 ms

- I can ping my server from MS DOS
- I can ping my server from
- I can ping my server from another server

- I cannot ssh into my server
- I cannot ssh into my server from another server

Inside my server..
- I can ping,, other servers
- But I cannot lynx and open all websites

When I restart network, it shows [refer attachment] captured from my KVM

View Replies!   View Related
IP (ping)
after my server down, i ask for reboot then the server up again.

but i cant access SSH via my main ip, but i can access SSH via second ip. when i ping main ip, all is request time, but my second ip can ping.

ok main ip cannot use, so i use second ip the main problem come i cant do yum update kernel, will show this error


Setting up Update Process
Setting up repositories
Cannot find a valid baseurl for repo: update
Error: Cannot find a valid baseurl for repo: update

when i try run socks5 proxy in my server, it running, but when i use it for my personal pc, the socks5 it not run....just show proxy is offline.

when i do wget some direct links

it always show, but never download


[root@xxxx ~]# wget
=> `squid-2.5.STABLE6-3.4E.12.i386.rpm'

so i try to go check resolv.conf, but don have problem, my other 2 same server also dont have problem with this dns server.

View Replies!   View Related
Ping My VPS
I just moved from PowerVPS to EuroVPS, being located in Europe myself, and was of course hoping for much better ping times. Also EuroVPS advertise themselves with a 30ms ping to most of Europe.

Anyway after my VPS was installed I compared the pings:EuroVPS ( average ping: 335ms
PowerVPS ( average ping: 129ms

335ms is of course ridiculously high, and after writing them a support ticket they told me it's probably a latency problem with my ISP

Can you please post the ping you get for (preferably people located in Europe)?

View Replies!   View Related
Fast EU Peering
on a .eu hosting company with good routing/peering around europe. I have customers all over europe but still wanna save money and centralize to one hosting company.

I am looking for a gigabit uplink but nessesarily i dont need flatrate traffic since we only hit peaks a few times a day..

What are your thoughts on companies providing this kind of service at a fair price?

View Replies!   View Related
Fast Uploads
i have moved my hosting to a new provider and i was wondering what is the quickest way to upload my 500MB files to the new server? Is there anyway i can speed this up like have a dedicated uplink port to my server, or via VPN or something, cos at the moment i have an upload speed of around 10KB/s,

View Replies!   View Related
Fast Host
anyone know or can recommended a good and fast host? for share plan

View Replies!   View Related
Fast Hositng
Does there are a site that compare hosting companies by fast (fast respond and explore)?

View Replies!   View Related
Is There A Fast Web Host Out There
Is there a webhost fast enough for providing large files (2.5GB +, going up to 10GB + larger) on my website to users worldwide?

At the moment my website is hosted in the UK and it seems to deliver download speeds of around 650kbps if only one person is downloading at a time. I have tried other web hosts, and their download speeds are never advertised, but have turned out to be even less in practise (e.g. 150kbps)

As I'm hosting large files (e.g. 1GB - 2.5GB - 8.5GB or more) on my website, I need something with unlimited speed. i.e. so that the download speed is limited only by the end user's connection.

Is there anything like this out there? I realise the files are very large in size, but I'd rather keep the process electronic than mail out hundreds of DVDs all the time.

View Replies!   View Related
Fasthosts ~ Or Rather Not So Fast
I have recently closed my Linux Developer account with fasthosts due to intermittant latency problems, and rubbish support query turn around, always over 48hours if replied to at all (most of my support queries were never answered unless I actually phoned in about them!)

So is mine an isolated incident or are others out there having the same problem?

View Replies!   View Related
Leaseweb Fast
I'm probably going to buy a dedicated server at but I wanted to know from peopl who have experiences if they have fast servers?

View Replies!   View Related
Fast DNN Hosting
I'm planning to host about 10 websites, most of them will be developed on Dotnetnuke (latest version). The most important issue is the speed of the web sites. The pages need to be opened fast. The target audience is located in Istanbul/Turkey, therefore I think the EU-based companies will be better for my requirements.

View Replies!   View Related
What Is Best Cheap And Fast VPS
I have a friend that has a VPS to run a few teamspeaks, he pays good prices,

View Replies!   View Related
Fast VPS Nodes
Does anyone here know where Fast VPS Nodes Providers are?

View Replies!   View Related
KVM Easy And Fast
What's the latest KVM technologies that's easy to use and have fast response time?

View Replies!   View Related
FDC 1GB Pipe - Anyone Know How Fast It Really Is
FDC Co-location packages include a $600/month package for a 1gp pipe

It's shared bandwidth, so does anyone know how fast it really is?

View Replies!   View Related
PHP 5.2.4 Fast CGI Not Working
I run lighttpd as my webserver, and 5.2.1 worked perfectly. I upgraded to 5.2.4 but when I checked my version, it said "cli". I ran the exact same configure command that I did with 5.2.1, but for some reason it says "cli". I then just ran this config:

'./configure' '--enable-fastcgi' '--enable-discard-path' '--enable-force-cgi-redirect'

And got this error:

collect2: ld returned 1 exit status
make: *** [sapi/cgi/php-cgi] Error 1

View Replies!   View Related
Fast..Zend Opt. Is Gone.
When I type php -v from ssh

PHP 4.4.7 (cli) (built: Aug 7 2007 10:12:20)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v1.3.0, Copyright (c) 1998-2004 Zend Technologies
with Zend Extension Manager v1.2.0, Copyright (c) 2003-2006, by Zend Technologies
with Zend Optimizer v3.3.0, Copyright (c) 1998-2007, by Zend Technologies

but from web site phpinfo, there is no zend Opt installed and non of my vbulletin site getting error page that I need to install zend.

I tried reinstall, rebuild but it did not work..

View Replies!   View Related
Ping In Nagios
I have configured Nagios on my network 10+ Servers (Linux+Windows) now when i check through http://localhost/nagios everything is ok but only ping command is giving following message :-

bin/ping -n -U -w 10 -c 5 x.x.x.x
CRITICAL - Could not interpret output from ping command

and mail me "server down " message

So what is the issue ?

I am able to run this command through command line

./check_ping -H {server} -w 100.0,20% -c 500,50% -p 5
PING OK - Packet loss = 0%

./check_ping -H x.x.x.x -w 300.0,80% -c 500.0,100% -p 5
PING OK - Packet loss = 0%

View Replies!   View Related
OpenVZ - HN Can't Ping VE
I'm running my own OpenVZ server with a few VPS's running on it and have a small network issue.

I can't ping any VE from the HN. All the other networking is working ok (strangely I can ping the HN from the VE) apart from this. It's a simple setup with one network card connected to the internet.

OpenVZ the latest stable version running on CentOS 5.2

I'm pretty sure it's not a firewall problem but is something to do with arp or routing and one of the settings in sysctl.conf

Has anyone else seen this?

View Replies!   View Related
Better The Ping The Better The Host
Does it matter?

I did a few tests

Pinging [] with 32 bytes of data:
Average = 191ms
Pinging [] with 32 bytes of data:
Average = 191ms
Pinging [] with 32 bytes of data:
Average = 175ms
Pinging [] with 32 bytes of data:
Average = 150ms
Pinging [] with 32 bytes of data:
Average = 148ms
Pinging [] with 32 bytes of data:
Average = 147ms
Pinging [] with 32 bytes of data:
Average = 113ms
The pages load really fast @ ipowerweb

View Replies!   View Related
Ping Tests
i've only ever used pings to test if a host is up or down.

But what other information am i looking for in ping tests. For e.g., the time in ms the TTL etc etc?

How can i test pinging my server from different locations around the world?

View Replies!   View Related
Ping Problem In Vps Xen
i install one xen guest ( centos5)

i run yum update and result is :
-bash-3.1# yum update
Loading "installonlyn" plugin
Setting up Update Process
Setting up repositories

Could not retrieve mirrorlist error was
[Errno 4] IOError: <urlopen error (-3, 'Temporary failure in name resolution')>
Error: Cannot find a valid baseurl for repo: extras

i use of middle config :
/etc/sysconfig/network-scripts/ifcfg-eth0 TYPE=Ethernet
ONBOOT=yes /etc/sysconfig/network
GATEWAY= /etc/resolv.conf (DNS resolver)


View Replies!   View Related
Ping Is Down, Http Is Up
My sites are up when I go to http and there is no slowdown but my monitors (panopta and pingdom) say that there is an outage in ping (only in ping, http is up). I tried pinging the server and there are packet loss up to 100% but the site is still up. I also used other online pinging tools (,, etc.) and host unreachable.

I tried contacting the provider but they say there are no network problem at this time. So I found this other site that's also hosted on the same provider and I can access their site but fails on ping.

View Replies!   View Related
Selinux (ping)
My server ping keeps disconnecting

However my ssh & website is smooth running!

When i type "service iptables stop", the ping runs just smoothly.

I have CSF installed in the server, like any other server using default configurations. I believe it has something to do with selinux? (or not?)

View Replies!   View Related
i think 216.245.208.x and 216.245.215.x DOWN, but limestonenetworks tell me :"problems well outside of our network, and I would highly suggest contacting your ISP for support on this matter" ....

View Replies!   View Related
Apache Ping
Must an IP address have to be pingable for apache to be seen.

I've set up an apache server at home and I noticed that if I block ping requests, no one can see i externally.

If I enable ping requests people can visit my site/server.

View Replies!   View Related
Cannot Ping Ssh To Other Server
I have 2 CPanel servers. I wanted to transfer multiple accounts via WHM but it gives me error that I cannot SSH into the other server.

I tried to ping the 2nd server from 1st server and it gives me:
root@s [~]# ping
PING ( 56(84) bytes of data.
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
cping: sendmsg: Operation not permitted

I added both server IP into allowed list inside my APF firewall on each server as well.

I rebooted both server earlier before, but it is still not solving my problem.

View Replies!   View Related
Ping Request
Can I have some of you ping and let me know what your results are? Also where you're located would be good.

My ISP is being crappy and my dsl line is basically down ever few minutes. They're supposed to fix it tomorrow.

My current results are:

Reply from bytes=32 time=66ms TTL=51
Reply from bytes=32 time=59ms TTL=51
Reply from bytes=32 time=65ms TTL=51
Reply from bytes=32 time=58ms TTL=51

This doesn't really have anything to do with my dsl being crappy, but rather I'm just curious as to what kind of responses people are getting around the world.

View Replies!   View Related
Can't Ping To The Server But Can Log In Ssh
I have a problem with my server, that i can't not ping


[root@server apf-0.9.6-2]# ping
ping: unknown host

But i can log in the ssh. i just installed apf, i check conf.apf to made sure there are port 80, but it still can't ping.

View Replies!   View Related
Fast Hosting Worldwide?
I need to provide an 8gb file download (split into 1gb parts) that will be downloaded by 80+ people worldwide, simultaneously. I'm talking for example, they will be each downloading at 1.2megabytes per second each (this is the average speed of their home connections), simultaneously.
What are the specs or things I should be looking out for in a website hosting provider?
One service I'm looking at is advertised as 0.5Mbps in bandwidth and 100Mbps in transit, for ã40 a month. The service I'm looking at is's colo business service ( What does this mean and is it fast enough? What is the difference between these two figures - 0.5Mbps bandwidth and 100Mbps transit?

View Replies!   View Related
Surpass Hosting - Are They Fast
I'm in the process of switching my host provider and Im leaning towards Surpass Hosting.

I've already contacted them for a few question and their support seems expectational as they respond my tickets thoroughly in less then 20 minutes.

Just a few questions to those that do use surpass or have used them. How fast are their servers for PHP like Wordpress and Invision Power Board and are are your sites stable (always fast, or are they slow at times and then fast) with them.

View Replies!   View Related
Server Slows Down Fast
The server I have running has LAMP and some other related services running. It's on a 100Mbit shared port. Whenever the server has been running for 30-90mins, the pings start to become very high (+2000ms). Problem exists with ftp, ssh, http etc, and restarting named, httpd, mysqld doesn't affect anything. The only thing that gets the pings back down and the speeds up again is to reboot the system, which takes about a minute. The MRTG graphs show that there isn't any significant traffic which cause the pings go down, in fact, the traffic goes close to 0 when the pings start sky rocketing. CPU load is < 0.1 and memory usage low as well.

View Replies!   View Related
Fast Support Response
anyone know of any company with fast response time? (5-30minute no matter what time of the day it is, and maybe even guaranteed in some way?)

i have 3 different server at 3 different provider for redundancy and backup purpose and on top of that have also try 3 other hosting company but seem like support is hit and miss depending on time sometime waiting 4-8+ hours for a response.

View Replies!   View Related
How Make Dns Resolve Fast
how do i speed up dns resolving my website. It is taking much time about 5-8 seconds. My site is

usually when i type and like other websites, those sites load much faster than anything. Is this dns or any other issue>

View Replies!   View Related
Finding A Fast Host
I have a site that is currently hosted in Australia and loads relatively quickly there , but it is very slow in Uk and France.

Eli kindly set up a trial at blurstorm but I am unhapy with the way it loads in australia which is its primary audience.

how to get my speeds up with the site? ATM there is a 2.8 mb swf file that loads in about 5 sec in aus but about 20 in europe.

Blurstorm is faster in europe(france)but unacceptably slow in Aus.

Is blurstorm considered fast servers on their reseller plans? Or do I need to upgrade my expenditure to get what I want?

View Replies!   View Related
How Fast Are Prices For CPU Dropping
i noticed that Intel is shipping new CPUs at such a fast rate that prices are dropping like stone... or am i wrong?

what do you think is the percentage points by which the prices of CPUs are dropping?

View Replies!   View Related
Connection Too FAST! 9.63 Mbyte/s
Lighttpd 1.4.19

I've added to lighttpd.conf -
connection.kbytes-per-second = 250

But then I look at server-status and see:

114 Connections
Traffic9.63 Mbyte/s

I want to slow this down because I'll exceed my bandwidth limit for the month.

View Replies!   View Related
How To Find Out How Fast Is My Website
Im trying to compare the speed of my website and others and I do know of this function ping but I was wondering how do you know weather its fast or slow like example 200+ ms etc. can someone enlighten me on speed and performance,

View Replies!   View Related
How Fast 10mbit Unmetered Really Is
How fast 10mbit unmetered really is?

I am thinking of starting a file hosting site.

lets say there are 100 people downloading a 100mb file, what estimate speed would each user get?

View Replies!   View Related
Host With Fast Network
fairly strong dedicated server probably minimum of a single processor dual core, preferably a quad-core and around 2GB+ RAM. I don't mind a metered bandwidth plan and I don't have a preference on how much bandwidth is provided but I need a fairly solid and fast network. I looked into midphase and I their plans look attractive but I've heard bad reviews on them on it being unreliable, unreliable support, and a slow network. I also recently used zenex5ive and I wasn't too happy with their network either. I've looked at a bunch of providers but I can't figure out which ones would suit me best. Anybody have any suggestions that you think would match my criteria? I mostly need the specs above and a fairly fast network with good pricing...

View Replies!   View Related
Fast Transfer Speeds For MP3
I serve mp3 dj mixes for some friends and am coming up on the end of my current hosting contract here in the next couple of months. They have been a fantastic host the only reason I am working on looking elsewhere is cost-related.

I got a unbelievable deal when I signed up last year and it would run me almost $300 to renew for another year, which is out of my price range.

Aside from great uptime (99.97% over 10 months), the thing I really like about the current host is their download speed. I have a 1mb cable connection at home and consistently download files at 850ish/kbps. Everyone I have spoken with has experienced similar speeds. This is much faster than any host I have ever used and is twice as fast as another host I use.

So, what I am looking for is a host that offers something similar in that regard that's around $10/month and optimally has coupons/deals floating around.

I would be happy getting 650kbps/sec, obviously the faster the better. Uptime is always a consideration, however this is more of a hobby and I am not expecting the same uptime that I get currently.

I am not against using a dreaded 'overseller' for this venture, I just need something that pushes large files fast.

I have plenty of time to find a new host, but would like to start getting a short list put together so I can request test files and whatnot.

View Replies!   View Related
How Fast Will The ARIN Update Be
I've changed some information related to an IP address but from popular websites it is still showing up the old information, even though it updated in the ARIN whois db. It's been 24 hours or so now.

View Replies!   View Related
1and1 Server Ping
So I'm wondering what if anything I can do to get a better ping from my 1and1 server.

It's located in Wayne, PA and my ping floats around 70ms and I'm in South Lake Tahoe, CA. I only ask because there are servers with Peer1 hosted in New York, NY that give me a ping around 20ms.

Thanks for any help or advice.

Its a Windows Server 2008 Web Box.

View Replies!   View Related
Why Can Ping And Tracert? But Can't Access
A website,which i can't access,but i used the ping and tracert instruct. the result tell me the IP and route is right.later,a use a Proxy site to access that site,it can. who knows the reason?

View Replies!   View Related
Ping And Traceroute Executables
I installed net query tool from this site

They say in order for ping and trace to work, you must chmod those executables on the server itself to 755. Is this safe or a security risk? The odd thing is, ping and trace works fine from or any other network tool site.

What is the location of those executables?

View Replies!   View Related
Ping In Vlans Not Working?
I have two servers both in a same vlan. Both may access Internet and be acceessed from Internet I setup db server and web server internal IP each as follows:

step 1: on web server:

vi /etc/sysconfig/network-scripts/ifcfg-eth0:0

add following:


save and /etc/init.d/network restart

step 2: on db server:

vi /etc/sysconfig/network-scripts/ifcfg-eth0:0

add following:


save and /etc/init.d/network restart

I used ifconfig to check both status, both of them are up. both of them may ping google, but when I try to ping their each other through internal IP, nothing returns.

I used command tracert to follow, found all packages were sent to Internet rather than an internal IP.

My host tells me to do it by making NAT, I have no idea on it. Anyone may help me out on how to do with NAT?

View Replies!   View Related
Should I Block Ping Requests
Should I block ping request to my servers from WAN?

View Replies!   View Related
My Server Is Getting 999 ( Lagt ) Ping!, Vps
i am hosting a GunZ Server on a VPS,

i wana to open 2 servers, ( Quest / clan ) 2 names,

but, i can'T open the 2, only 1 if i opened the 2 one of them is getting for all palyers 999 ping ( Agent Error )...

well this is may caused by AE, how can i fix this?

View Replies!   View Related
Copyright 2005-08, All rights reserved