Plesk 12.x / Linux :: FTP Login Suddenly Does Not Work Anymore
Jun 8, 2015
I have a freshly installed Plesk 12 on CentOS 7.
FTP logins worked fine yesterday. Today I get a 530 Login incorrect.
I think the only change since yesterday was a server reboot.
/var/log/secure tells me that /etc/ftpusers is missing
Code:
Jun 8 00:33:19 macbook proftpd: PAM unable to dlopen(/usr/lib64/security/pam_stack.so): /usr/lib64/security/pam_stack.so: cannot open shared object file: No such file or directory
Jun 8 00:33:19 macbook proftpd: PAM adding faulty module: /usr/lib64/security/pam_stack.so
Jun 8 00:33:19 macbook proftpd: pam_listfile(proftpd:auth): Couldn't open /etc/ftpusers
It seems like I have got a lot of trouble with Plesk 12 on a CentOS 7 machine.
1. I could not install Plesk properly due to some drweb problem. 2. Than the smb configuration seems only to be implemented partly. 3. Suddenly FTP login is not possible anymore (503 Access denied)
And now even Apache is not running anymore!
Code:
Unable to generate the web server configuration file on the host <xxxxxxx.dyndns.org> because of the following errors:
Template_Exception: [Mon Jun 08 14:16:28.058302 2015] [so:warn] [pid 4230] AH01574: module actions_module is already loaded, skipping [Mon Jun 08 14:16:28.063364 2015] [so:warn] [pid 4230] AH01574: module headers_module is already loaded, skipping [Mon Jun 08 14:16:28.063957 2015] [so:warn] [pid 4230] AH01574: module logio_module is already loaded, skipping [Mon Jun 08 14:16:28.066150 2015] [so:warn] [pid 4230] AH01574: module suexec_module is already loaded, skipping httpd: Syntax error on line 357 of /etc/httpd/conf/httpd.conf: Syntax error on line 5 of /etc/httpd/conf.d
I have a fully working clean installation of Plesk 12 + updates (CentOS 6.5 x64). Previous installation was a test and was working just fine with the license file.Today I did a clean install. When I tried to restore my original key file (Parallels Plesk Panel 10.x/11.x and Later 100 Domains w/1 yr SUS) I get the following error:
Code: ERROR: bad arguments (key_upload.php:76)
As result I'm not able to create domains and start using the server/panel.
I'm using Ubuntu 14.04.2 LTS and Plesk 12.0.18 - update 38. Since i have reinstalled 3 servers, i don't have imap connection possible in some case.
- When i connect from a Thunderbird, it works only if it's not secure : any attempt with ssl is refused.
- When i try to use a smartphone with the same working config done in Thunderbird, i canno't log whatever i do to find something working on the smartphone (note : it's works with pop)
- Horde refuse all users. If i switch to Roundcube, all works...
There is something wrong : i search the web, the forum, for 14 days now, without success. I tried many thing from the KB...no success either.
I've notice that LFD (from CSF) is not sending SSH Login notification anymore...
I've tried "mail root" and "mail <my email>", it's working. I see the login line in /var/log/secure Tried to tail exim_maillog and I did not saw it at all! I've tried to restart CSF and also look at the configuration, SSH is still there...
I'm running CentOS 4.x with cPanel
Got any clue ?
I've got an other server, same configuration and he's still sending the notification.
After having some issues with my server mail program i read an article online where i though removing psa-courier-imap will resolve my mail problems.
Now nor my email is working but also i lost my plesk panel. Going to plesk ip address there's nothing anymore.Checked my server and is printing i have plesk 11.0.9 installed but is nowhere to find. I try to install psa-courier-imap again but yum cant find it.
Everything working on the server including all sites are available on the web.The only think i'm missing is the Plesk login page.
Symptoms are that two of my domains are not resolved anymore, one of which is my mail, the other the plesk default. So even I try to login by ip, it bounces to the default name and that does not resolve.
This probably happened yesterday morning and i see an autoupdate log, so i can't think what else would cause this out of the blue, since i am on holiday and have not touched the server for three weeks.
The log doesn't really have errors, just one warning i saw, about packages not beeing updated, using old ones. But that was only passenger, so ok i guess. The log is rather big and so i didn't read it all. It ends by saying patch for 12.0.18 will not be applied and errors in apt-get update, that i mentioned.
The domains were set up like many others that still work, as masters.
I can log in as root, so if i could just let me log in by ip again.
Linux auringostaitaan.fi 3.2.0-4-amd64 #1 SMP Debian 3.2.63-2+deb7u1 x86_64
unfortunately plesk was upgrading automatically and something goes wrong.The update is successfully installed but now I can't see all the website images...I'm running this plesk version: Plesk version12.0.18 Update #6, last updated at July 1, 2014 03:24 AM...Is there something that can I do for restoring images?
In the last few days the responses from Plesk's XML API have been extremely slow. It's now taking an average of 45 seconds to handle an XML API request where it used to be more around 5 seconds. What would cause that? What service handles these requests on the server so I can try rebooting it?
it works fine for months but now when i type: mytop in SSH i geto erro:
---------------- Cannot connect to MySQL server. Please check the: * database you specified "test" (default is "test") * username you specified "root" (default is "root") * password you specified "" (default is "") * hostname you specified "localhost" (default is "localhost") * port you specified "3306" (default is 3306) * socket you specified "" (default is "") The options my be specified on the command-line or in a ~/.mytop config file. See the manual (perldoc mytop) for details. Here's the exact error from DBI. It might help you debug: Unknown database 'test' ---------------
Over the weekend, I upgraded from Plesk 10.3 to Plesk 11.5, using the updater in the control panel. Everything seemed to go well. However, this morning I've noticed that some, not all, email accounts are having trouble logging into the server to send and receive mail. Other accounts are working fine.Via POP, I get this error: -ERR Temporary problem, please try again later
Via SMTP, I get this error: 535 auth failure
I see this in the maillog:
Jun 17 07:15:05 [server] courier-pop3d: LOGIN FAILED, user=[username], ip=[::ffff:xxx.xxx.xxx.xxx] Jun 17 07:15:05 [server] courier-pop3d: authentication error: Input/output error
And this... Jun 17 07:24:50 [server] smtp_auth: FAILED: [email address] - password incorrect from [host] [xxx.xxx.xxx.xxx]
I replaced the server name, username, host, and IP in the above.
Here are the steps I've tried so far. - Changing the password using the control panel. - Updating the number of daemons in authdaemonrc - Restarting the services
I just upgraded my Plesk on Ubuntu (vServer) yesterday. But after the upgrade I couldn't login to the Panel anymore because all I get when I try to reach the panel (https://panel.examplesite.com:8443) is a white screen.
I rebooted the server and restarted the panel as well as Apache several times with no change.
I cannot login to Plesk server with admin credentials as it says Error: Access for administrator from address 'xx.xx.xx.xx' is restricted in accordance with IP Access restriction policy currently applied. Also I cannot SSH to server and it says connection refused.
I have VPS Server with Parallels Plesk 11.5.30 (64 bits) on OVH.ORG..Today i do Update to newest version via https://MY-IP:8447
Code: [URL] .....
Now i cant login to my server: [URL] ....
How can i repair it. I dont wanna install again Plesk Panel becouse i have a lot of configuration and email adress.All components like Apache Mysql, ftp works good, but i cant only login.
ERROR: Failed to download the package URL...transfer closed with 205 bytes remaining to read..Not all packages were installed.Please try installing packages again later.try installing the packages again.
I'm running plesk 11.0.9 on Centos 6. I can't login anymore, the administration login page is just a blank page. The error in the log file is:
(mod_fastcgi.c.2746) FastCGI-stderr: PHP Fatal error: Call to a member function getContext() on a non-object in /usr/local/psa/admin/plib/Navigation.php on line 54
I would like my clients only to be able to access Plesk Panels from a certain domain, instead all from or with all the domains hosted on our server, is there a way to accomplish that?
When I try to login via webmail horde I get always:
Login failed because your username or password was entered incorrectly.
The logfile shows:
Jul 13 12:23:32 HORDE [error] [imp] FAILED LOGIN for mail@domain.tld [1.2.3.4] to to {127.0.0.1:143 [imap/notls]} [pid 5358 on line 139 of "/usr/share/psa-horde/imp/lib/Auth/imp.php"]Click to expand...
I just finished installing Plesk Panel 12. I seems like that everything is working as it should, except for FTP. I am not able to login with any FTP accounts.
After a few minutes or after specific actions Plesk shows the login screen without obvious reason. For example when I am trying to modify a file online and try to save it for the second time it always shows the login screen.
Also, when I enter the credentials I can see that the previous session(s) remain open. I have configured the session idle time to 1000 minutes, although I do not remain idle for 300 min anyway.
After a fresh install on a Debian Wheezy system, I get the following error(s) when trying to access the control panel.
https://sub.example.com:8443/ 404 Not Found Nginx
My log
Code: 2014/06/09 19:04:15 [warn] 32236#0: conflicting server name "" on 0.0.0.0:8443, ignored 2014/06/09 19:04:26 [error] 22597#0: *43 "/usr/share/html/index.html" is not found (2: No such file or directory), client: 68.51.77.126, server: , request: "GET / HTTP/1.1", host: "sub.example.com:8443"
I set a new Plesk 12 server (Debian 7.8) and migrate some domains from a plesk 11.0.9 server.After this, FTP does not work. I can connect but I receive this error:
Error:The data connection could not be established: ETIMEDOUT - Connection attempt timed out..And no list of folder or files found. Not one domain, any domain.I restart xinetd and fil2ban but still same problem. Via control panel I can see the files but not via FTP.
I cannot SSH or login into Plesk Admin panel. Once I tried SSH, it says 'connection refused'. Once I tried login into admin panel, it says 'Error: Access for administrator from address 'xxx.xxx.xxx.xxx' is restricted in accordance with IP Access restriction policy currently applied.
Tried restarting the plesk server too. Nothing seems working.
I am using CentOS 6.4... I cannot login to the admin page. Showing this message:
Error: Unable to log you on. An internal error occurred in the Single Sign-on authorization engine. Please try to log in later, and contact your hosting service provider if the problem persists.
Error log: Doing restart of Parallels Installer... 2014-05-17 01:08:38: (server.c.1543) server stopped by UID = 0 PID = 10122 2014/05/17 01:15:04 [crit] 16495#0: *1 connect() to unix:/var/run/sw-engine.sock failed (2: No such file or directory) while connecting to upstream, client: 127.0.0.1, server: , request: "POST /plesk-billing/task-manager.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "localhost:8443"
[Code] ....
I have tried this post: [URL] ....
[root@ns4008757 ~]# /usr/share/plesk-billing/integration --command=repair-all Customer & Business Manager is not installed yet. [root@ns4008757 ~]# /usr/local/psa/bin/sso -g SSO status: on SSO server url: https://XXX.XXX.XXX.XXX:8443 SSO API version: sw:sso:idp:1_0 SSO Application ID: z9fabw14uesl6ccoz0wnpwk68eghgvs6ny7
After running this two lines, when i login to admin panel, it shows: Can not extract SAML message.
