am moving from reseller hosting as we speak.
In the WHM VPS optimized control panel - under Service Status, I see these
Disk /dev/hda3 (/backup) No DMA! (Click to Enable) Disk /dev/hda1 (/) No DMA! (Click to Enable)
Should I? or shouldn't I "click to enable" - or is this something controlled by my host? what does this mean?
regards,
Mike
Instinct-Software.com admin
Apache:2.2.26
OS:RHEL
How to translate non-chunked message to a chunked message using apache server side configuration?Idea is that apache must translate non-chunked request message coming from a client to a Transfer-Encoding: chunked message,before it reaches my apache C module.Here is the configuration i tried in httpd.conf,but of no success
ProxyRequests On
ProxyVia On
<Proxy *>
</Proxy>
<VirtualHost x.x.x.x:8080>
ServerName server
ServerAdmin root@server
LogLevel warn
SetEnv proxy-sendchunked 1
[code]...
What kind of web hosting plan would I need for a message board with 500+ online active members and 100,000+ overall members?
I'm just trying to figure it out in advance and I believe that some of you have the experience and knowledge about this specific issue.
I have placed .htaccess to block some ip, when the person ip matches, my server will gives this message "client denied by server configuration", got lots of them everday in my error log, how can I disable this message? I need other error log message but not this message, is there any way I can disable it?
using centos and plesk.
My server has been running fine for months and then I got this message:
IMPORTANT: Do not ignore this email.
The hostname (server.dealsreferals.com) resolves to . It should resolve to 69.46.27.111. Please be sure to correct /etc/hosts as well as the 'A' entry in zone file for the domain.
Some are all of these problems can be caused by
/etc/resolv.conf being setup incorrectly. Please check this file if you
believe everything else is correct.
You may be able to
automaticly correct this problem by using the ' Add an A entry for your
hostname ' under ' Dns Functions ' in your Web Host Manager
What is the problem? Maybe I should do what is suggested, however, why suddenly the problem?
My server is working fine. Should I just let this problem? What harm can happen?
I've only just finished setting up Apache, PHP and MySQL etc.
I went through the sitepoint pdf on how to set everything up - and i tested it by making a php page (showing the date) and saving it in the htdocs folder just like the instructions.
I go to view the page in firefox by going to [url] and i get this error message
Apache HTTP Server has encountered a problem and needs to close.
Error signature
szAppName: httpd.exe
szAppVer: 2.2.4.0
szModName: php5ts.dll
szModVer: 5.2.3.3
offset: 00099ec5
cpsrvd failed @ Mon Mar 19 01:00:15 2007. A restart was attempted automagicly.
View 4 Replies View RelatedI have a dedicated server and I am using the SMTP of one of my domain names to send mail. The IP of this domain name ends in .25 and the server hostname IP ends in .24.
The emails that are received list the server hostname and IP in the message headers instead of the IP of the domain name that is sending the email. Is there something that can be done about this? I read that a message could be mistaken as spam if it doesn't originate from the exact IP of the domain in the 'from' field.
When i use the ip of my homepage and not the domain i see this:
Quote:
Apache is functioning normally
How can i change it?
And for lxadmin the same :
Quote:
This is the LxAdmin Default Page
How can i change it?
I keep getting this error whenever I try to update my packages which prevents me from doing any updates. Anyone have any idea how to solve this?
Transaction Check Error:
file /etc/aliases from install of setup-2.5.58-7.el5.noarch conflicts with file from package da_exim-4.67-1.i386
Trying to figure out the hardware configuration I'll need to host a message board and was wondering if those of you with experience could throw out some numbers in terms of # users, bandwidth used, and what hardware configuration you're on (single server, dual server, dual proc, RAM, disk, etc). Been tricky trying to guestimate so some numbers to compare would be a huge help.
View 7 Replies View RelatedI am opening this thread to complain about Yahoo mail issues with our ISP. Its been a month that we are having problems trying to send e-mail to Yahoo accounts.
First of all we are a Web Hosting company in Brazil and the IP that they blocked only host our main domain maxihost.com.br. We dont send bulk ou spam e-mails, we only send invoices and support replies to their accounts.
The logs from our mail servers when trying to e-mail them is below,
Code:
LOG: MAIN
cwd=/usr/local/cpanel/whostmgr/docroot 4 args: /usr/sbin/exim -v -M 1KHPUv-0007rp-0r
delivering 1KHPUv-0007rp-0r
Connecting to g.mx.mail.yahoo.com [209.191.88.239]:25 ... connected
SMTP<< 421 Message from (189.1.169.32) temporarily deferred - 4.16.50. Please refer to [url]
SMTP>> QUIT
LOG: MAIN
SMTP error from remote mail server after initial connection: host g.mx.mail.yahoo.com [209.191.88.239]: 421 Message from (189.1.169.32) temporarily deferred - 4.16.50. Please refer to [url]
Note that I already filled out the form
[url]telling them I am an ISP and I do not send any e-mail spam for their accounts, although every time I fill it I get an automatic/canned e-mail from their system with the following content,
Code:
Hello Guillherme,
Thank you for writing to Yahoo! Mail.
Please note that if you are not the mail server administrator for the
mail server(s) affected, we encourage you to contact the administrator
so they can address the possible issues regarding mailings from the mail
server. We also appreciate your report as your input helps us to
identify ways to constantly maintain and improve our service. We
apologize for any inconvenience this has caused you.
If you notice any further difficulties when delivering to Yahoo! Mail
accounts, after waiting a reasonable amount of time, please let us know
by replying directly to this email. However please note the following:
If you are receiving the error code "421 Message from x.x.x.x
temporarily deferred" or "451 Message temporarily deferred - 4.16.50" in
your SMTP logs, this indicates that the message you attempted to send
was not accepted by Yahoo! Mail servers. It is not a permanent error;
your system will automatically re-try later. If, after attempting to
deliver to Yahoo! and receive the 4.16.50 error repeatedly and conform
to the best sending practices outlined in the following page, we
encourage you to apply for prioritized sending at the link below.
Recommended Best Practices:
[url]
Prioritized Delivery (Please note that this form can also be used by
senders whose mailings are being directed to the Bulk Folder):
[url]
If you are receiving a separate error than that above, please provide
the text of any error messages you may have received. Also, providing
the specific IP address of the mail server that experienced the delivery
issue will help us to troubleshoot the issue more efficiently.
For assistance with delivery issues to Yahoo! Mail, please visit:
[url]
We appreciate your patience while we work to improve and maintain our
service.
Thank you again for contacting Yahoo! Mail. Your case number for this
issue is 50943856. Please reference it in all future communication about
this particular issue.
Regards,
James
Yahoo! Customer Care
50943856
For assistance with all Yahoo! services please visit:
[url]
When I try to reply to that e-mail I get an error back.
What can you do to stop so many users on your server that use mysql as apart of their website from getting this message: MySQL server has gone away
Like there has to be something installed or configured on the server that causes this as well, as I know people are taking too long to load something and it through that message, but it has to be something you can do server wide to get reed of it?
I getting error from cpanel now about possible hard drive failure.First it was only secondary disk,so i send request to support to ask them why is that happening and they said it is just temperature warning,but they still checked disk.Testing took 3 hours,and support said everything is ok.
But now i start to receive again that message,and now not just secondary disk,also primary disk.So what should i do,should i just ignore that error considering now is summer and it's hot or contact support again?I am in that dilema beacuse if support will test disk that require offline testing and means server will be down again,and now even longer beacuse of both disk warning,and again if they realy fail then i will lost all data and experience much longer downtime.
Here is message which i getting: ...
We have CentOS 4 and whm 11 on the server
We are getting following error while we view the awstats.
WARNING: LastLine parameter in history file is '20080518001148' so in future. May be you need to correct manually the line LastLine in some awstats*.domain.com .conf files.
is there anything to run on server to fix this issue globally as we are facing this for all domains on server.
Also in the awstats configuration file of the website(awstats.domain.com.conf). when we make the value
WarningMessages = 0
then the error gets fixed.
But after running /scripts/runweblogs < username > the value of WarningMessages again come back to 1
WarningMessages=1
and we again see the above Warning message in the awstats webpage.
I have a client who could not send email to another domain, it didn't bounce just disappeared.
When I look in the exim_mainlog, the message in question wind up frozen after getting this error:
smtp transport process returned non-zero status 0x000e: terminated by signal 14
2008-05-24 17:34:23 1K17WW-0002so-Sn == vicoello@xxxxx.com R=lookuphost T=remote_smtp defer (-1): smtp transport process returned non-zero status 0x000e: terminated by signal 14
2008-05-24 17:34:23 1K17WW-0002so-Sn Frozen
2008-05-25 18:02:27 1K17WW-0002so-Sn Message is frozen
...
2008-05-26 22:08:47 1K17WW-0002so-Sn Message is frozen
....
2008-05-27 15:00:31 1K17WW-0002so-Sn Message is frozen
??? Dissapeared
It never warned the user as said it dissapeared, I have checked exim_mainlog and have found other cases to different domains that maybe the users have not reported but they were lost too.
I tried /scripts/eximup --force and that didn't fix it.
For running PHPBB3 or vBulletin, are there certain *ballpark* figures used to help decide between 256, 384, or 512MB of dedicated RAM on a VPS?
E.g. If you have XX number of concurrent users, you will probably need this amount of RAM?
I have just got a Dedicated Server and everything is running fine except the mail (outbound). Some times it sends mail fine but most of the time I am getting a bounce back stating the address cannot be found (Which I know is untrue because it is my main email address). It is not only happening on my address but a few others I have checked as well.
Here is what I get when I get a bounce back
==========================================
Could not deliver message to the following recipient(s): ......
exim_mainlog is showing this errors continuously
2008-04-06 12:35:59 Berkeley DB error: PANIC: Invalid argument
2008-04-06 12:35:59 Berkeley DB error: PANIC: fatal region error detected; run recovery
What should I do to correct it?
Few days back i began to have problem with server overload, when i checked in /var/log/messages i found a lot of
Jun 28 14:17:59 secure named[3523]: client 200.48.225.146#59035: error sending response: host unreachable
Jun 28 14:17:59 secure named[3523]: client 200.51.211.5#32774: error sending response: host unreachable
Jun 28 14:17:59 secure named[3523]: client 202.55.145.3#32637: error sending response: host unreachable
Jun 28 14:17:59 secure named[3523]: client 66.245.177.163#3936: error sending response: host unreachable
Jun 28 14:17:59 secure named[3523]: client 202.59.163.2#32768: error sending response: host unreachable
Jun 28 14:17:59 secure named[3523]: client 216.247.37.56#24990: error sending response: host unreachable
Jun 28 14:17:59 secure named[3523]: client 194.18.168.184#39718: error sending response: host unreachable
Jun 28 14:17:59 secure named[3523]: client 64.226.28.70#45706: error sending response: host unreachable
all at the same hour,minutes and seconds, this that i wrote is an example (the ip's are reals) but like it i found a lot of more, and is in the same time that the server overload. the server is RHE and i have APF and BFA installed.
This message was created automatically by mail delivery software.
A message that you sent has not yet been delivered to one or more of its recipients after more than 72 hours on the queue on server.blablablabla.com
Im recieving this kind of errors from some domains of this server...
Im using cPanel + RHEL 3.
Looking at the logs I found this:
23.red-88-22-154.staticip.rima-tde.net (lista@domain.info) [88.22.xxx.xx] is currently not permitted to relay through this server. Perhaps you have not logged into the pop/imap server in the last 30 minutes or do not have SMTP Authentication turned on in your email client.
And SMTP authentication is enabled at the mail client.
Hello, if anyone is familiar with network technical jargon, I would greatly appreciate a translation. I cannot access my server/site or my datacenter's website.
I checked my regular site monitor and it said both sites were up. However when I checked another online monitor I received the following message:
"Got an error when connecting to ns2.ochiba.net/64.235.53.39 with a request for ochiba.net/ANY: Socket Timeout Exception: Socket timeout on name server ns2.ochiba.net. null"
Here is the ping information:[url]
My site is ochiba.net.
I have no clue what this means. Is this a network issue? DNS issue? Is it on my end (I don't think this is the case because my datacenter's site is down as well)? My datacenter's end? Any recommendations on what steps I should take to resolve this?
I've been unable to access my server now for 20 minutes, so any help would be greatly appreciated (even if it is to point me in the direction of an appropriate google search)
I have a dedicated linux/cpanel server running various websites with the shared ip and one website with a dedicated ip.
But when sending mail through sendmail from the dedicated ip website the ip in the helo greeting is not matching the ip of the sender, it is using the main shared ip rather than the dedicated ip which is producing a 550 error from some receiving mail servers. I have racked my brains trying to figure this out and was wondering if anyone else has/had a similar experience and found a solution.
By the way the helo greeting sent in mail from the shared ip websites is fine...
I am trying to troubleshoot messages piling up in my /var/log/messages on CentOS 5 that look like this:
Apr 18 10:04:01 sc16 kernel: printk: 3 messages suppressed.
Apr 18 10:04:06 sc16 kernel: printk: 2 messages suppressed.
Apr 18 10:04:14 sc16 kernel: printk: 3 messages suppressed.
Apr 18 10:04:17 sc16 kernel: printk: 1 messages suppressed.
Apr 18 10:04:25 sc16 kernel: printk: 3 messages suppressed.
Apr 18 10:04:31 sc16 kernel: printk: 1 messages suppressed.
Apr 18 10:04:39 sc16 kernel: printk: 2 messages suppressed.
The messages are supressed so I can't see what they are or what is causing them.
How can I disable printk supression?
I have already tried:
echo 0 > /proc/sys/kernel/printk_ratelimit_burst
echo 0 > /proc/sys/kernel/printk_ratelimit
They don't seem to disable it... Any ideas?
I've VPS, I want to cutomize server busy message.
what i should do to cutomize this page?
i have just start my own dedicated server for two weeks, after some system migration, i expect the hosting will provide mail server for customer to send system notifications.
but the hosting finally didn't provide, my OS is windows 2003 R2,
I have a dedicated server with godaddy (I know) and have used a pre-installed mail server product to host a few email accounts. Nothing fancy. My mail server is required to relay through godaddy's servers. A few of my users began complaining about email bounces - specifically "554 message refused". I opened a support ticket 2 weeks ago.
Initially godaddy insisted that the emails contained suspicious phishing links - which they didn't. I incrementally stripped the content of the emails and discovered that it was two simple characters that caused the bounce - left and right square brackets []. I presented this information to godaddy and their response was:
"When sending emails in the future, please make sure that these two brackets are not placed in succession to avoid the email from being bounced"
The problem is that my users are trying to forward or respond to email with embedded content that sometimes contains []. I cannot expect them to strip down their emails.
While acknowledging this issue, godaddy has refused to correct it. Sorry for long-winded explanation but I'm interested in some of your feedback - Does this policy make sense? Why can't they correct it?
I keep getting the following message in my /var/log/message log file:
kernel: ** RABHIT ** IN=eth0 OUT= MAC=00:1b:78:6e:a7:cc:00:03:fe:a0:50:00:08:00 SRC=XX.XXX.XXX.XXX DST=XXX.XXX.XXX.XXX LEN=40 TOS=0x00 PREC=0x00 TTL=237 ID=53229 PROTO=TCP SPT=51203 DPT=80 WINDOW=0 RES=0x00 RST FIN URGP=0
where the XXX.XXX.XXX.XXX is an ip address. Can anyone explain what this is?
This is on a Red Hat box.
I get this message
mysite.com has sent an incorrect or unexpected message. Error Code: -12263
Any reasons what that means/fix it?
my vBulletin forum members start complaing about an intermittent forbidden error message:
Forbidden
You don't have permission to access /vb/forumdisplay.php on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request
i did tail -f /usr/local/apache/logs/error_log and find lot of lines like this:
[Fri May 9 17:13:33 2008] [crit] [client 217.69.189.2] (24)Too many open files: /.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable
i also found the vb folder and all folders inside it have permession of 775 and all files have permession of 664
The server have to be rebooted after receiving a few of the following kernel message..
Nov 8 12:13:40 server1 kernel: sim invoked oom-killer: gfp_mask=0x201d2, order=0, oomkilladj=0
Nov 8 12:13:40 server1 kernel: [<c04588d9>] out_of_memory+0x72/0x1a5
Nov 8 12:13:40 server1 kernel: [<c0459dae>] __alloc_pages+0x216/0x297
Nov 8 12:13:40 server1 kernel: [<c045b01b>] __do_page_cache_readahead+0xc4/0x1c6
Nov 8 12:13:40 server1 kernel: [<c04555e8>] sync_page+0x0/0x3b
Nov 8 12:13:40 server1 kernel: [<c04506fd>] __delayacct_blkio_end+0x32/0x35
Nov 8 12:13:40 server1 kernel: [<c06089bf>] __wait_on_bit_lock+0x4b/0x52
Nov 8 12:13:40 server1 kernel: [<c0455563>] __lock_page+0x52/0x59
Nov 8 12:13:40 server1 kernel: [<c0457e8a>] filemap_nopage+0x151/0x313
Nov 8 12:13:40 server1 kernel: [<c0460b48>] __handle_mm_fault+0x178/0x8b3
Nov 8 12:13:40 server1 kernel: [<c042f77c>] do_sigaction+0xb5/0x155
Nov 8 12:13:40 server1 kernel: [<c060a9db>] do_page_fault+0x20a/0x4b8
Nov 8 12:13:40 server1 kernel: [<c060a7d1>] do_page_fault+0x0/0x4b8
Nov 8 12:13:40 server1 kernel: [<c0405a71>] error_code+0x39/0x40
Nov 8 12:13:40 server1 kernel: =======================
Nov 8 12:13:40 server1 kernel: Mem-info:
Nov 8 12:13:40 server1 kernel: DMA per-cpu:
Nov 8 12:13:40 server1 kernel: cpu 0 hot: high 0, batch 1 used:0
Nov 8 12:13:40 server1 kernel: cpu 0 cold: high 0, batch 1 used:0
Nov 8 12:13:40 server1 kernel: cpu 1 hot: high 0, batch 1 used:0
Nov 8 12:13:40 server1 kernel: cpu 1 cold: high 0, batch 1 used:0
Nov 8 12:13:40 server1 kernel: cpu 2 hot: high 0, batch 1 used:0
Nov 8 12:13:40 server1 kernel: cpu 2 cold: high 0, batch 1 used:0
Nov 8 12:13:40 server1 kernel: cpu 3 hot: high 0, batch 1 used:0
Nov 8 12:13:40 server1 kernel: cpu 3 cold: high 0, batch 1 used:0
Nov 8 12:13:40 server1 kernel: DMA32 per-cpu: empty
Nov 8 12:13:40 server1 kernel: Normal per-cpu:
Nov 8 12:13:40 server1 kernel: cpu 0 hot: high 186, batch 31 used:27
Nov 8 12:13:40 server1 kernel: cpu 0 cold: high 62, batch 15 used:32
Nov 8 12:13:40 server1 kernel: cpu 1 hot: high 186, batch 31 used:20
Nov 8 12:13:40 server1 kernel: cpu 1 cold: high 62, batch 15 used:43
Nov 8 12:13:40 server1 kernel: cpu 2 hot: high 186, batch 31 used:24
Nov 8 12:13:40 server1 kernel: cpu 2 cold: high 62, batch 15 used:36
Nov 8 12:13:40 server1 kernel: cpu 3 hot: high 186, batch 31 used:28
Nov 8 12:13:40 server1 kernel: cpu 3 cold: high 62, batch 15 used:14
Nov 8 12:13:40 server1 kernel: HighMem per-cpu:
Nov 8 12:13:40 server1 kernel: cpu 0 hot: high 186, batch 31 used:21
Nov 8 12:13:40 server1 kernel: cpu 0 cold: high 62, batch 15 used:4
Nov 8 12:13:40 server1 kernel: cpu 1 hot: high 186, batch 31 used:29
Nov 8 12:13:40 server1 kernel: cpu 1 cold: high 62, batch 15 used:58
Nov 8 12:13:40 server1 kernel: cpu 2 hot: high 186, batch 31 used:12
Nov 8 12:13:40 server1 kernel: cpu 2 cold: high 62, batch 15 used:46
Nov 8 12:13:40 server1 kernel: cpu 3 hot: high 186, batch 31 used:27
Nov 8 12:13:40 server1 kernel: cpu 3 cold: high 62, batch 15 used:17
Nov 8 12:13:40 server1 kernel: Free pages: 118308kB (508kB HighMem)
Nov 8 12:13:40 server1 kernel: Active:421521 inactive:430319 dirty:0 writeback:0 unstable:0 free:29577 slab:11654 mapped-file:883 mapped-anon:856741 pagetables:5457
Nov 8 12:13:40 server1 kernel: DMA free:11680kB min:68kB low:84kB high:100kB active:0kB inactive:0kB present:16384kB pages_scanned:0 all_unreclaimable? yes
Nov 8 12:13:40 server1 kernel: lowmem_reserve[]: 0 0 880 4080
Nov 8 12:13:40 server1 kernel: DMA32 free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
Nov 8 12:13:40 server1 kernel: lowmem_reserve[]: 0 0 880 4080
Nov 8 12:13:40 server1 kernel: Normal free:106120kB min:3756kB low:4692kB high:5632kB active:437212kB inactive:262196kB present:901120kB pages_scanned:1567124 all_unreclaimable? yes
Nov 8 12:13:40 server1 kernel: lowmem_reserve[]: 0 0 0 25600
Nov 8 12:13:40 server1 kernel: HighMem free:508kB min:512kB low:3928kB high:7344kB active:1408712kB inactive:1299160kB present:3276800kB pages_scanned:9082467 all_unreclaimable? yes
Nov 8 12:13:40 server1 kernel: lowmem_reserve[]: 0 0 0 0
Nov 8 12:13:40 server1 kernel: DMA: 130*4kB 125*8kB 89*16kB 63*32kB 35*64kB 7*128kB 2*256kB 0*512kB 1*1024kB 1*2048kB 0*4096kB = 11680kB