We like to create the mail accounts through php scripts in mywebsite.com website. So we request you to setup the Qmail with Vpopmail server in our server. As we have the following packages are already installed.
Please install the vpopmail in the ourserver and configure these four packages to create the mail accounts via php script. So that we can use vaddsuer command in php to create the mail ids annd also imap_open commands to access the mails.
Our server is configured with Plesk control panel.
The installation is very urgent, as our website is going live sooner.
I will make the decision sooner and let us know the cost, as it will be given to the provider sooner.
We like to create the mail accounts through php scripts in mywebsite.com website. So we request you to setup the Qmail with Vpopmail server in our server. As we have the following packages are already installed.
1. Qmail
2. Courier POP/IMAP
3. Horde Webmail client
providers who install the vpopmail in the our server and configure these four packages to create the mail accounts via php script. So that we can use vaddsuer command in php to create the mail ids and also imap_open commands to access the mails.
We will take the decision sooner since we need to live the website shortly.
I tried to install cacti, somehow it didn't work out so i decided to install munin. But when i choose munin from plugins list it starts to install than it says
Starting Munin Node: [ OK ] Can't locate RRDs.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 . /usr/local/cpanel/3rdparty/lib/perl) at /usr/share/munin/munin-graph line 225. BEGIN failed--compilation aborted at /usr/share/munin/munin-graph line 225. Install Complete (munin 1.2.4) Done
I did some googling about the error and it is because rrdtool is not installed.
Actually i installed rrdtool 1.3.0 from its website it was in /usr/local/rrdtool
Anyway i clicked install a rpm from whm and choose rrdtool.i386
I'm trying to install Centos 5 64bit with 8GB RAM and 4 SATA hard drive... But it keeps getting stuck at the screen menu: Select the appropriate keyboard for the system.
I got this new server with FDC today, I asked for CentOS 5 minimal package installation, when I got the server I checked with rpm -qa |wc -l and seeing 572 packages. I have other CentOS 5 servers running with only 220 packages installed. So I asked the tech to reinstall it but he says the install is as minimal as the default install will allow. it doesn't seem right to me,
if after doing the following and transferring my domains to the server, they will functions properly as far as BIND setup is concerned. This will also serve as installation instructions for others if you can verify that this is all good.
I have installed BIND9 and setup DNS with the following: ------------------------------------------------------------------------
zone "server.mydomain.com" { type master; file "server.mydomain.com.db"; }; zone "mydomain.com" { type master; file "mydomain.com.db"; }; zone "mydomain.net" { type master; file "mydomain.net.db"; }; Upload named.conf to /var/named/chroot/etc
Modify /etc/resolv.conf to have the following before its current data: search mydomain.com nameserver 127.0.0.1 nameserver 78.129.143.155 // Replace this with the server's IP // So below these there should be one or more nameserver $ip that point to the ISP's name servers so that the server can download stuff.
Modify /etc/host.conf to become the following: order hosts,bind multi on nospoof on
Modify the files mydomain.com.db and mydomain.net.db and server.mydomain.com.db to have the correct IP address. (These are DNS zone files that I'm sure are correct so I don't need you to confirm those.) * Upload them to /var/named/chroot/var/named
I'm just testing Plesk 12 on CentOs 7 and after installation is succesfully completed, I cant access [URL]
This is the environment and steps which I taken: * Fresh CentOs 7 iso * Windows 2008 R2 Hyper-v hypervisor
1) Installation of the CentOs successfully completed 2) Yum update 3) Download auto-installer 4) Run auto-installer 5) process successfully completed 6) NOW I CAN'T access the url ...
Not by choice but I got a machine running qmail with vpopmail on it. The queue on this thing is ridiculously long and doesn't seem to be getting any smaller due to the large amounts of spam sent to several domains under it.
Most of the spam is coming in the form of a@domain.com aa@domain.com ect. So I figured rather than bounce the mail back to these non existent addresses rather go the route of /dev/null. Now for qmail you'd just do # but seems for vpopmail that does not work.
So my .qmail-default have the following currently:
/usr/local/vpopmail/bin/vdelivermail '' /dev/null
Unfortunately it still sends mail back to the user who sent the mail but it sends it was delivered to /dev/null.
So any suggestions on to get that working and ways to manage this queue a heck of a lot better?
Today I open my email logs and I was surprise by what I found!
Logs like this:
Nov 3 17:23:55 warhead vpopmail[5979]: vchkpw-smtp: vpopmail user not found sys@:118.167.19.58 Nov 3 17:23:58 warhead vpopmail[6010]: vchkpw-smtp: vpopmail user not found sys@:118.167.19.58 ...
We are installing Apache Web Server httpd-2.2.29 in AIX 7.1
While running the command ./configure --prefix=/usr/sap/apache --enable-mods-shared=most --with-mpm=prefork --with-expat=builtin --with-included-apr we get the below output:
checking for chosen layout... Apache checking for working mkdir -p... yes checking build system type... powerpc-ibm-aix7.1.0.0 checking host system type... powerpc-ibm-aix7.1.0.0 checking target system type... powerpc-ibm-aix7.1.0.0
[Code] ....
Also while running ./buildconf we get the below output:
found apr source: srclib/apr found apr-util source: srclib/apr-util rebuilding srclib/apr/configure buildconf: checking installation... buildconf: python version 2.7.5 (ok) buildconf: autoconf version 2.69 (ok)
I've just installed DSS 5.5.4 on Apache/Redhat server.
The installation went fine. The darwinadminserver started automatically.
But when I go to the Webadmin page on port 1220 from the browser, or when I try to stream the sample videos from quicktime, the server just hangs, won't connect.
I checked the error logs and they read:
2006-12-20 09:32:39: WARNING: Another process is already using the following RTSP port: 554 2006-12-20 09:32:39: WARNING: Another process is already using the following RTSP port: 7070 2006-12-20 09:32:39: WARNING: Another process is already using the following RTSP port: 8000 2006-12-20 09:32:39: WARNING: Another process is already using the following RTSP port: 8001 2006-12-20 09:32:39: WARNING: Streaming Server failed to listen on all requested RTSP port(s). 2006-12-20 09:32:39: WARNING: Streaming Server is not listening for RTSP on any ports.
I rebooted the server without darwin to see what processes were using those ports but I couldn't see any processes.
I work for a big organization that has a check list for standard windows server 2003 installation.
The list includes stuff such as , removing some users and adding some domain users, changing system name, windows update, ie7 installation, adding the system to the domain, installing norton anit virus from file shares and so on.
Is there anyway to auto mate this or atleast everything to do with system settings including windows update ? (Minus norton install)
I am sure one can make an answer file but i am not convinced by that answer as the post installation changes require editing regedit and other local security policies.
I have installed PEAR on my localhost/apache server and have no problem running pear scripts such as HTLM Quickform and validator. (php Anthology Vol 1 & 2 by Harry Fuecks) )
But I am having problems getting Pear to install on my Linux shared server. GoDaddy say that Pear is loaded by default with php4 and are not prepared to assist in any further installations.
I know that a copy of the pear installation can be uploaded to the folder where I host my site. I ran the following script and this shows that PEAR is enabled
<?php include("PEAR.php"); $p = new PEAR(); print_r($p); ?>
:OutPut in browser:
PEAR Object ( [_debug] => [_default_error_mode] => [_default_error_options] => [_default_error_handler] => [_error_class] => PEAR_Error [_expected_errors] => Array ( ) ) I have searched the forum but I am still none the wiser. If there is anyone on the forum who had been through the setup procedure before I would welcome your help. paradox1
We may soon get into the unmanaged arena. Recently there has been debates on whether an unmanaged server should come with anything other than a bare OS, even if ordered with a control panel. I'd like to get a feel for what you as a customer expect from an unmanaged host when ordering a server with control panel.
I need a dedicated server sometime in the future and I was wondering if I should use Virtuozzo or Hypervm and how much can I get a dual core or quad core with good support? Thank you for your time.
I have a clean installation of Parallels Plesk on my server, and I installed wordpress on two of my domains. I'm scanning for installations through Plesk Admin, and it shows two installations with empty name and the toolkit is not functional at all. Check the attached screenshot.
Just wondering if there is a list / guide on what files should be set to either chattr +i or chattr +a?
You could go a little 'crazy' and chattr +i all your major binaries......however my only issue with this is that yum updates will fail until you manually chattr -i and update. what not to chattr +i or chattr +a?
