OpenVZ APF Installation CentOS
Jul 7, 2008I installed APF on my CentOS OpenVZ VPS but when I start it the ssh terminal is spammed with this error:
iptables: Unknown error 4294967295
Does anyone know how to fix this?
ADVERTISEMENT
Openvz Kernel On Centos 64bit
May 21, 2009I was Use Centos 64bit and when i install the openvz kernel and the openvzquota:
Quote:
yum -y install ovzkernel
yum -y install vzctrl vzquota vzpkg
I reebot my server and never boot up
I was planning to use a 8gb ram that's why i select 64bit.
Centos RAID Configuration For OpenVZ
Sep 24, 2007Would this be a good setup for a VPS Serving system with 2x 500gb hard disks (up to) 8gb memory.... (Looking to use OpenVZ to create about 14-15 512mb VZ VPS's)?
Host machine to do nothing other than host the VPS's. Host O/S to be Centos 5 x64, guest O/S's to be the usual OpenVZ supported linuxes.
Make 2 software raid partitions 120mb, each
|
+- Make RAID 1, mounted at /boot
Make 2 s/w raid partitions Remainder of drive
|
+- Make 1 LVM Physical Drive, using RAID 1
|
+- Make Logical Partition, 20gb, mounted '/'
+- Make LP, Swap 16gb
+- Make LP. ext3 remainder, mounted as '/vz'
Is it important what order I should make the Logical Partitions? Should I create a /tmp partition? If so, how much?
Quota Problem In OpenVZ/HyperVM/CentOS
Jun 9, 2008Anyone of the top of their head know how to fix the CPanel "Unlimited" Quota problem in CentOS/OpenVZ/HyperVM?
This post is not related to Infinitie, I personally have a few VPS servers I run and they are on CentOS 4.6 and the latest HyperVM, secondary quotas is enabled but I still keep having that problem where I cannot get quotas.
CentOS 5 - Problem Installing OpenVZ Kernel
Jun 22, 2008Just to make things clear, i am not new at setting up VPS nodes, i have set up all of my servers with the HyperVM/OpenVZ setup and they work perfectly, but im having a problem with a new server.
Just received my new server, installed HyperVM-Slave, rebooted but the OpenVZ kernel was not installed for some reason, so i manually installed the OpenVZ Kernel using the RPM as yum seemed to install the wrong kernel.
I then installed the kernel using RPM and got this error at the end of installation:
grubby: unable to open /dev/hda: No such file or directory
grubby: unable to open /boot/boot.b: No such file or directory
grubby fatal error: unable to find a suitable template
I have never encountered this error with any of my other servers before...
Also after installation everything seems to be correct. /etc/grub.conf has the new OpenVZ kernel displayed, and default is set to 0, so upon startup it should be booting the correct kernel, but the thing is, when i reboot the machine the default kernel is loaded even though the grub.conf is configured to load the OpenVZ Kernel.
Im thinking that this may be due to the error i got when installing the kernel.
Munin Installation In Centos
Jun 25, 2008I tried to install cacti, somehow it didn't work out so i decided to install munin. But when i choose munin from plugins list it starts to install than it says
Starting Munin Node: [ OK ]
Can't locate RRDs.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 . /usr/local/cpanel/3rdparty/lib/perl) at /usr/share/munin/munin-graph line 225.
BEGIN failed--compilation aborted at /usr/share/munin/munin-graph line 225.
Install Complete (munin 1.2.4)
Done
I did some googling about the error and it is because rrdtool is not installed.
Actually i installed rrdtool 1.3.0 from its website it was in /usr/local/rrdtool
Anyway i clicked install a rpm from whm and choose rrdtool.i386
root@server # rpm -qa | grep rrd
rrdtool-1.2.23-6.fc6
But it is still giving error above when i try to install munin
Centos 5 Installation Froze
Jan 19, 2008I'm trying to install Centos 5 64bit with 8GB RAM and 4 SATA hard drive... But it keeps getting stuck at the screen menu: Select the appropriate keyboard for the system.
View 5 Replies View RelatedMytop Installation On Centos VPS
Jul 15, 2008I just can't make Mytop work on my Centos VPS. Looks like I made some perl problem. Is there any good working installation tutorial?
View 10 Replies View RelatedVpopmail Installation In Centos 5 Server
Apr 24, 2009We like to create the mail accounts through php scripts in mywebsite.com website. So we request you to setup the Qmail with Vpopmail server in our server. As we have the following packages are already installed.
1. Qmail
2. Courier POP/IMAP
3. Horde Webmail client
Please install the vpopmail in the ourserver and configure these four packages to create the mail accounts via php script. So that we can use vaddsuer command in php to create the mail ids annd also imap_open commands to access the mails.
Our server is configured with Plesk control panel.
The installation is very urgent, as our website is going live sooner.
I will make the decision sooner and let us know the cost, as it will be given to the provider sooner.
CentOS 5 Minimal Package Installation
Apr 27, 2008I got this new server with FDC today, I asked for CentOS 5 minimal package installation, when I got the server I checked with rpm -qa |wc -l and seeing 572 packages. I have other CentOS 5 servers running with only 220 packages installed. So I asked the tech to reinstall it but he says the install is as minimal as the default install will allow. it doesn't seem right to me,
View 8 Replies View RelatedMy CentOS 5 Bind Installation Commands
Dec 15, 2007if after doing the following and transferring my domains to the server, they will functions properly as far as BIND setup is concerned. This will also serve as installation instructions for others if you can verify that this is all good.
I have installed BIND9 and setup DNS with the following:
------------------------------------------------------------------------
yum install bind-chroot
chmod 755 /var/named/
chmod 775 /var/named/chroot/
chmod 775 /var/named/chroot/var/
chmod 775 /var/named/chroot/var/named/
chmod 775 /var/named/chroot/var/run/
chmod 777 /var/named/chroot/var/run/named/
chown -R named /var/named/chroot/etc
chown -R named /var/named/chroot/var
cd /var/named/chroot/var/named/
ln -s ../../ chroot
cp /usr/share/doc/bind-9.3.3/sample/var/named/named.local /var/named/chroot/var/named/named.local
cp /usr/share/doc/bind-9.3.3/sample/var/named/named.root /var/named/chroot/var/named/named.root
touch /var/named/chroot/etc/named.conf
chkconfig --levels 235 named on
named.conf now contains:
Code:
options {
pid-file "/var/named/chroot/var/run/named/named.pid";
directory "/var/named/chroot/var/named";
query-source address * port 53;
allow-query { any; };
recursion no;
};
zone "server.mydomain.com" { type master; file "server.mydomain.com.db"; };
zone "mydomain.com" { type master; file "mydomain.com.db"; };
zone "mydomain.net" { type master; file "mydomain.net.db"; };
Upload named.conf to /var/named/chroot/etc
Modify /etc/resolv.conf to have the following before its current data:
search mydomain.com
nameserver 127.0.0.1
nameserver 78.129.143.155 // Replace this with the server's IP
// So below these there should be one or more nameserver $ip that point to the ISP's name servers so that the server can download stuff.
Modify /etc/host.conf to become the following:
order hosts,bind
multi on
nospoof on
Modify the files mydomain.com.db and mydomain.net.db and server.mydomain.com.db
to have the correct IP address. (These are DNS zone files that I'm sure are correct so I don't need you to confirm those.)
* Upload them to /var/named/chroot/var/named
/etc/init.d/named start
LVM With RAID1 In Text Mode Centos Installation
Jun 28, 2009How can config LVM with RAID1 in text mode centos 5.3 installation?
I need to do it for xen installation.
Vpopmail Installation On Centos 5 Dedicated Server
Apr 24, 2009We like to create the mail accounts through php scripts in mywebsite.com website. So we request you to setup the Qmail with Vpopmail server in our server. As we have the following packages are already installed.
1. Qmail
2. Courier POP/IMAP
3. Horde Webmail client
providers who install the vpopmail in the our server and configure these four packages to create the mail accounts via php script. So that we can use vaddsuer command in php to create the mail ids and also imap_open commands to access the mails.
We will take the decision sooner since we need to live the website shortly.
Our server is configured by plesk control panel.
Plesk 12.x / Linux :: CentOs 7 After Installation Webpage Not Accessible
Sep 26, 2014I'm just testing Plesk 12 on CentOs 7 and after installation is succesfully completed, I cant access [URL]
This is the environment and steps which I taken:
* Fresh CentOs 7 iso
* Windows 2008 R2 Hyper-v hypervisor
1) Installation of the CentOs successfully completed
2) Yum update
3) Download auto-installer
4) Run auto-installer
5) process successfully completed
6) NOW I CAN'T access the url ...
[openvz ]How To Make For Kernel Of Openvz To Recognize 4GB Of Ram?
Dec 10, 2008[openvz ]How to make for kernel of openvz to recognize 4GB of ram?
How to make for kernel of openvz to recognize 4GB of ram?
# uname -a
Linux xxxxxxxxxxx 2.6.18-92.1.13.el5.028stab059.3 #1 SMP Wed Oct 15 17:48:55 MSD 2008 i686 i686 i386 GNU/Linux
Difference Between CentOs 5.0 And Centos 4.5? Both With Plesk
Oct 1, 2007What is the difference between CentOs 5.0 and Centos 4.5? (Both contains Plesk)
Would CentOS 5 contain more updates and fixes? CentOS 4.5 be more stable?
OpenVZ Or Xen?
Feb 18, 2009Can anybody advise, or provide somewhere which advises on the pros/cons of OpenVZ and Xen virtualisation platforms?
View 14 Replies View RelatedOpenVZ Or Xen
May 18, 2009Well which one?
Also if possible say why you prefer either OpenVZ or Xen.
OpenVZ Max Ram
Sep 17, 2008I am being told that when a VPS in openvz hits the maximum ram assigned to it that openvz disables that vps.
Isn't the ram limit a hard limit that simply restricts the available ram to that container to XX ram?
Is this normal?
JVM On A Xen Or A OpenVZ
Oct 8, 2008We are looking for a VPS to house a scala framework running on a JVM, from what I can gleen Xen would be the best route for us or is it possible that openVZ with enough dedicated ram would suffice, does anyone have a view on this?
View 6 Replies View RelatedMemory On OpenVZ
Oct 31, 2009How I can see how much guaranteed memory I have ? And how I can see how much guaranteed memory I have used ?
Additional how I can see how much bustable memory I have used or how much total memory my VPS is using.
Overselling In OpenVZ
Feb 17, 2009Just how it actually works? I have a pretty good knowledge about Xen and Linux KVM (somewhat about VMware as well). Prior to joining WHT, I rarely heard about Virtuozzo and OpenVZ.
I'm just interested in RAM usage actually. I also read on some threads that you can oversell storage and net bandwidth as well? That just seems a little weird to me.
I also used a fairly good amount of Solaris Zones as well.
Example, if I have a 8GB box and I leave some, say 512MB, reserved for CT0. 8192-512=7680 (I know the ACTUAL RAM amount will NOT be 8192), that leaves 7680MB use for CTs. So technically in OpenVZ if you dice out dedicated 512MB VEs... you end up with 15 right?
So you are able to sell more than 15 VPSs on a 8GB server box? If also set all burstable RAM to 1GB for all VEs.
In Xen, when you set dedicated RAM it is taken away from dom0, period. That's all there is to it, no oversell (Xen 3.3+ you can use ballooning to overcommit RAM, I know).
Within CT in VZ, user is able to check beancounters to see the guaranteed/burstable RAM. Technically you can't lie to the users.
I researched around... when oversell in VZ and the RAM gets maxed out... VZ will try to slow/stop/kill processes in order to keep the guests happy, to me that's just dangerous. Why needs to kill processes for RAM saturation?
Anyone can shed some lights for me? Or point me to an article(s). It can be technical, I should be able to grasp.
Hypervm And Openvz Vps
Apr 25, 2009I am trying to create some vps using openvz but after creating the vps with the Centos basic template 304mb i can't ping the ip and i can't view the centos welcome page in my browser (using ip and not domain, so i don't need to change there anything yet) and the most important is that i can't connect to the vps using ssh
I aks for many good users about my problem but i don' found a solution yet.
I ask my DC about ip's and they told me that the ip's are routed in my server.
I follow this instructions:
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 50G 2.8G 44G 6% /
/dev/sda3 198M 21M 168M 11% /boot
/dev/sda5 408G 2.4G 385G 1% /vz
tmpfs 1012M 0 1012M 0% /dev/shm
I follow this:
I disable selinux by editing /etc/sysconfig/selinux and changing the line to selinux=disabled
and then run:
I just login using ssh as root and run the folllowing commands.
Did i have to move to another directory to run them or ?
setenforce 0
wget[url]
Next i open /etc/grub.conf
vi /etc/grub.conf
and change default=1 to default=0
Then i add the ip's at the pool and create a plan and then create a vps without any errors but nothing.
I try with my DC resolvers or the 4.2.2.1 4.2.2.2 but nothing.
I alo add at the settings the gateway with no results at all.
After all i can't ping the ip that the vps got from the pool even ping it and not possible to connect to it using the ssh Sad
HyperVM+OpenVZ
Apr 17, 2009When you're creating VPS container, you can ssh with that IP and login with your username and password correct? But, what is the problem when I successfully created a VPS, and when trying ssh into it, I can't. Ok, here we go. I want to create a 2nd vps and will be using it as my DNS server. I enter a set of IPs into HyperVM's IPpool. First IP: x.x.x.178 Last IP: x.x.x.182 Resolv Entries (space Separated) : Gateway (IP): x.x.x.x.177 NetMask: 255.255.255.248
Then I created a vps resource plan. And then I created a VPS and it use the first IP from above. I want to connect to SSH and want to make it as my DNS server but seems the IP are not responding, it wasn't even live. So, what is the problem here? Where I did wrong? Just to let you know, I successfully created 1 VPS before that and it works without any hiccups. Got even whm/cpanel installed as well on it. The thing that I suspected is that my DC pulled the IPs off me and assigned them to other server. Waiting for their reply on this though.
What Does OpenVZ / W HyperVM
Aug 21, 2008What does OpenVZ / w HyperVM
Can I distribute VPS through?
How To Install Yum In Openvz ?
Aug 30, 2008When i using openvz to create VPS, and RHEL4 needed yum installed.
I don't know how to install yum on it.
Xen Or Openvz On Hypervm?
Feb 12, 2008i have dedicated server. i want install hypervm on this server my work is sell vps.
of your seems xen is better or openvz for my work?
server is :
Intel 2.13Ghz Quad-Core Xeon X3210 Dell PowerEdge 840, 1066MHz, 2x4 MB L2 Cache
4GB DDR2 RAM
2x250GB HDD
Have You Heard Of OpenVZ?
Nov 2, 2007I'm trying to convince someone into a project. He's not sure if OpenVZ is well known.
Do you know of it?
How Can Secure /tmp /var/tmp In OpenVZ VPS ?
Mar 15, 2007recently I got a VPS from cheapvps.co.uk and so far so good. Im getting used to the VPS enviroment. I tried to follow several guides about how to secure with noexec and nosuid the /tmp and /var/tmp and it did not work.
in http : / / www . webhostingtalk .com/showthread.php?t=474681&highlight=tmp points it must be done from the hosting. Same is said in http : // kb . swsoft . com/article_130_648_en.html.
I asked the hosting to do it and they told me as I got an Unmanaged VPS they cant do it for me.
Do anyone know how can be done ? I dont want to use tmpfs as it uses main memory.
VPS - Mananged, Non/ Xen Or Openvz
Jul 26, 2008i am looking to get away from hostgators extremely overloaded servers and get a vps. I have been admining linux servers for a while although never as a web server, but think i can handle that aspect. I have done a huge amount of research but dont know which way to go. One of the things thats rough is the control panels, i like cpanel and have only used cpanel but many charge alot for it. I have been considering an xl-256 plan from vpsland.com. they are east coast (i am in NJ, west coast is out) and their xl plan is xen with swap. But its $15 for cpanel and that is too much, i was thinking of trying directadmin for $6. Is directadmin any good? I need spamassasin and that stuff of course. To me its crazy that openvz has no swap and the server will crash if you reach max ram like at vpslink.com. I really liked vpslink.com's phone support but the west coast thing is rough. I have been looking at http://www.ubiquityservers.com/vps/new-york.php these guys but its virtuozzo, but cpanel is cheap only $5 a month. bodhost.com seemed cheap at $8 for cpanel. then i found this which sounds great! especially since its close but i emailed them to ask if its xen or openvz and havent heard back in almost 12 hours which scares me for support. i like phone support but vpslink.com again was on the west coast. their cpanel was cheap though at $8. plus i dont know if i want managed ro not then i remembered this site, and remembered i had gotten alot of help hear before so i figured it be best to hear others experience and favorites, etc.
View 7 Replies View RelatedOpenVZ Questions
Sep 23, 2007I am aiming to offer VPS based on OpenVZ. Have some questions, please help to answer
- in OpenVZ, is there any monitor script, that will release an email to say one VPS is down? Or will I need to use external monitoring?
- can I do the backup / restore of full VPS within OpenVZ? Can customers do it themselves?
- how hard to change the VPS configuration? For example, upgrading from 256MB RAM to 512MB RAM, or adding more CPU, space...?
- how about the IP control in OpenVZ? Let's say each VPS will have 2 IPs, so to prevent customers adding more IPs, I will need to setup VLAN, is that correct? How hard is it in OpenVZ?
- how about the ideal hardware for running OpenVZ? Saying SATA, or SCSI disks, how many RAM... for example