Slow Server-to-server FTP'ing On Windows
I have a number of dedicated servers at different hosting companies, all with 100mbps burstable ports, using several versions of Windows (2003 or 2008, Standard or Enterprise).
I've tried setting up FTP servers (the one that is part of IIS) on 4 of them, to transfer files between the servers. But, I can't get a single transfer to go faster than about 10-12Mbps. If I upload multiple files, each will go at right around 10-12Mbps (so I can get, say, ~50Mbps if transferring 5 files simultaneously). I've tried passive FTP, and I've tried tweaking the TCP settings (TcpWindowSize, GlobalTcpWindowSize, Tcp1323Opts), and the results are the same.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Server Very Slow, But Server Load Is Near Zero
I'm having trouble with a new server. It's a dedicated (Q6600 + 8 gig RAM + 4 x 250gig in Raid 10 + Centos 5.3 64bit + Cpanel). The machine is way overpowered for the traffic going to the site. The server load is rarely above .10 and often closer to zero. I'm getting periodic extreme slow downs. Web pages will take 30-60 seconds to load (or longer). SSH will timeout, or if I can connect, it will take seconds (sometimes 10-15 seconds) for key press to register in the SSH terminal. Pop3 times out, etc. This might last for 15 minutes or 3-4 hours. Then, everything will start running like a champ again. Traceroutes to the server during the slow downs haven't shown a problem between the server and where I am testing from (have connected from multiple proxies and remote sites to eliminate my local internet connection). I'm looking for any advice on how to trouble shoot this. Hardware? Software? Configuration issue? It is definitely not a capacity/load issue. There have been no spikes in web traffic. The opposite, this is a very slow time for my site, which is why I moved to a new server in May.
View Replies!
View Related
Server Too Slow
this is my server and i host only one site as upload image but it is too slow and usully apache down how i can optimize this server please Processor Information Processor #1 Vendor: GenuineIntel Processor #1 Name: Intel(R) Pentium(R) 4 CPU 2.26GHz Processor #1 speed: 2262.422 MHz Processor #1 cache size: 512 KB Memory Information Memory: 1002104k/1015744k available (2150k kernel code, 12844k reserved, 716k data, 164k init, 98240k highmem) System Information Linux 2.6.9-42.0.3.EL #1 Fri Oct 6 05:59:54 CDT 2006 i686 i686 i386 GNU/Linux Physcial Disks Current Memory Usage total used free shared buffers cached Mem: 1003164 976220 26944 0 102932 471740 -/+ buffers/cache: 401548 601616 Swap: 1052216 171412 880804 Total: 2055380 1147632 907748
View Replies!
View Related
Slow Server ...
frends now iam haveing dedicated server with pentium-4 and RAM is 2GB,my site online members is more than 100 members,now i feel slow in server,what i have add extra RAM or any chage in server
View Replies!
View Related
Server Is Slow
Why is my hosting server usually slow and down? CPU Usage : 100% Main : >3GB (total physical memory: 3GB) i dont know Do user access to website that are hosted on my server too crowded make server slow while bandwidth only have 4MB.
View Replies!
View Related
Slow Server
Server is dead slow. Its 3.0 1GB Ram Plesk Lniux Red Hat E4 machine. The top -c result is as below. 197 total, 6 running, 191 sleeping, 0 stopped, 0 zombie Cpu(s): 4.0% us, 1.7% sy, 0.3% ni, 0.0% id, 94.0% wa, 0.0% hi, 0.0% si Mem: 1027556k total, 953880k used, 73676k free, 23604k buffers Swap: 2040244k total, 102308k used, 1937936k free, 87872k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3167 mysql 15 0 288m 67m 4336 S 0.8 6.8 40:37.97 /usr/libexec/mysqld --defaults-file=/etc/my.cnf --basedir=/usr -- 3247 apache 18 0 125m 75m 4344 D 0.7 7.5 0:00.34 /usr/sbin/httpd 3039 root 26 10 13628 5808 2656 S 0.3 0.6 0:00.69 mytop 3250 apache 16 0 121m 71m 4520 R 0.3 7.1 0:00.35 /usr/sbin/httpd 4671 apache 15 0 141m 89m 6512 S 0.2 9.0 0:57.54 /usr/sbin/httpd 1882 popuser 15 0 4176 700 564 S 0.2 0.1 0:00.17 /usr/bin/pop3d Maildir 2111 popuser 15 0 4036 712 564 S 0.2 0.1 0:00.47 /usr/bin/pop3d Maildir 3327 apache 17 0 124m 73m 5556 R 0.2 7.3 0:00.50 /usr/sbin/httpd 1 root 16 0 3580 484 456 S 0.0 0.0 0:02.11 init [3] 2 root 34 19 0 0 0 S 0.0 0.0 0:14.01 [ksoftirqd/0] 3 root 5 -10 0 0 0 S 0.0 0.0 0:00.56 [events/0] 4 root 9 -10 0 0 0 S 0.0 0.0 0:00.00 [khelper] 5 root 15 -10 0 0 0 S 0.0 0.0 0:00.00 [kacpid] 19 root 5 -10 0 0 0 S 0.0 0.0 0:00.00 [kblockd/0] 40 root 10 -10 0 0 0 S 0.0 0.0 0:00.00 [aio/0] 20 root 15 0 0 0 0 S 0.0 0.0 0:00.00 [khubd] 39 root 15 0 0 0 0 S 0.0 0.0 4:09.01 [kswapd0] 186 root 25 0 0 0 0 S 0.0 0.0 0:00.00 [kseriod] 295 root 15 0 0 0 0 D 0.0 0.0 2:29.80 [kjournald] 1373 root 6 -10 2272 376 372 S 0.0 0.0 0:00.02 udevd 1606 root 6 -10 0 0 0 S 0.0 0.0 0:00.00 [kauditd] 1648 root 6 -10 0 0 0 S 0.0 0.0 0:00.00 [kmirrord] 1672 root 15 0 0 0 0 S 0.0 0.0 0:00.00 [kjournald] 1673 root 19 0 0 0 0 S 0.0 0.0 0:00.00 [kjournald] 2443 root 15 0 1608 528 456 D 0.0 0.1 2:14.13 syslogd -m 0 2447 root 16 0 2696 368 316 S 0.0 0.0 0:00.00 klogd -x 2474 rpc 15 0 3304 404 400 S 0.0 0.0 0:00.00 portmap 2493 rpcuser 18 0 2648 528 524 S 0.0 0.1 0:00.00 rpc.statd 2519 root 16 0 4672 188 152 S 0.0 0.0 0:00.10 rpc.idmapd 2590 root 15 0 1952 436 284 S 0.0 0.0 0:00.07 /usr/sbin/smartd 2599 root 19 0 1940 356 352 S 0.0 0.0 0:00.00 /usr/sbin/acpid 2659 named 16 0 43736 7664 1884 S 0.0 0.7 12:22.15 /usr/sbin/named -u named -c /etc/named.conf -u named -t /var/name 2702 root 16 0 4956 912 792 S 0.0 0.1 0:03.86 /usr/sbin/sshd 2715 root 16 0 3104 712 620 S 0.0 0.1 1:02.87 xinetd -stayalive -pidfile /var/run/xinetd.pid 2869 postgres 16 0 19772 1440 1332 S 0.0 0.1 0:00.08 /usr/bin/postmaster -p 5432 -D /var/lib/pgsql/data 2873 postgres 18 0 10572 216 176 S 0.0 0.0 0:00.00 postgres: stats buffer
View Replies!
View Related
Server Is So Slow
My server is so slow I don’t know where the problem is Server Load from 2 to 8 Monthly bandwidth 1300 GB Unique visitor 4000 - 5000 daily Page loads 13.000 – 20.000 This is current server features Intel Pentium 4 2.8Ghz 1024MB RAM Bandwidth: 1500GB
View Replies!
View Related
Server Slow To Load
I dont know much about what could be cuasing this so i come to you for advice, i am currently at wired tree on their VPS384 package with 348MB of ram and my site is really slow to load [url]sometimes it is so embaressing to show people i just dont bother, i am sure this is deferring visitors from my content how can i speed this up? I can add more ram but it will push the price and if the price goes too high i might aswell move to a Hybrid with wiredtree.
View Replies!
View Related
Server Network Very Slow
problem with my server running CentOS 5.3. I noticed that there are huge pings to my server from time to time, example: ------------------ 64 bytes from HOSTNAME (server-IP): icmp_seq=0 ttl=60 time=2.93 ms 64 bytes from HOSTNAME (server-IP): icmp_seq=1 ttl=60 time=2.70 ms 64 bytes from HOSTNAME (server-IP): icmp_seq=2 ttl=60 time=1901 ms 64 bytes from HOSTNAME (server-IP): icmp_seq=3 ttl=60 time=899 ms 64 bytes from HOSTNAME (server-IP): icmp_seq=5 ttl=60 time=2.69 ms 64 bytes from HOSTNAME (server-IP): icmp_seq=6 ttl=60 time=2.62 ms 64 bytes from HOSTNAME (server-IP): icmp_seq=4 ttl=60 time=2132 ms 64 bytes from HOSTNAME (server-IP): icmp_seq=8 ttl=60 time=2.57 ms 64 bytes from HOSTNAME (server-IP): icmp_seq=7 ttl=60 time=1190 ms 64 bytes from HOSTNAME (server-IP): icmp_seq=10 ttl=60 time=2.65 ms 64 bytes from HOSTNAME (server-IP): icmp_seq=9 ttl=60 time=1048 ms 64 bytes from HOSTNAME (server-IP): icmp_seq=12 ttl=60 time=2.74 ms 64 bytes from HOSTNAME (server-IP): icmp_seq=11 ttl=60 time=1205 ms ------------------ First I thought that it is network related, but most strange for me was that I did not have any packets lose. Then I tried to ping from my server to other hosts - situation was the same - some ping were good and some were huge (700ms, 800ms, even 2000ms) I checked: cat /proc/sys/net/ipv4/netfilter/ip_conntrack_max and it was 65536 Then I checked: cat /proc/sys/net/ipv4/netfilter/ip_conntrack_count and it was ~1600 so normal. dmesg was showing such errors: conntrack_ftp: partial 227 3331059707+13 Then I checked ifconfig, here is the output: ------------------ eth0 Link encap:Ethernet HWaddr 00:24:21:57:2B:6F inet addr:MAIN=IP Bcast:BCAST=IP Mask:255.255.255.192 inet6 addr: fe80::224:21ff:fe57:2b6f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:170557113 errors:0 dropped:2421127049 overruns:0 frame:0 TX packets:182047660 errors:0 dropped:46 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2756835074 (2.5 GiB) TX bytes:79640621 (75.9 MiB) Interrupt:82 Base address:0xe000 ------------------ Strange for me was: RX packets [...] dropped:2421127049 TX packets [...] dropped:46 I did not have such dropped information on all my other servers. Dropped counter for RX was constatnly increasing. So I decided to restart all services on the server. After restarting network and ipaliases - problem disappeared. RX dropped counter is still rising, but I do not have any slowdowns on the server and pings are normal. My question is - does anyone could have any idea what can casue my problem and how can I prevent this in the future?
View Replies!
View Related
Server Running Very Slow
i have a strange problem at my server , i hosted 1 wesite ( forum script with no plugins ) when my traffic consuption reache to 25mbs the server running very slow for hours although the load avarage is very normal 1-2 Iowait 3% ram consumption 8-10Gb my uplink port 1Gb and of course my DC said the connection is normal with no limitation the server specs are good Quad procs 7200 ,16Gb ram ,15K SCSI speed connections reache to 2000-2500 per seconds
View Replies!
View Related
Server Running Slow
i have installed redhat Cent O.S 4.2 on my sever. while client is accesing its homepage , it has a slow response. when client use ftp for file transfer, response from server is slow. i am running php software and MYSQL database in my server. i am using 80GB hard disk and still 28GB freespace is remaining. i have 512 MB of memory, in which currently 91 MB is still free. o/p for " vmstat" command is procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 160 91296 40656 287300 0 0 9 7 60 34 0 0 100 0 o/p for "free" command is total used free shared buffers cached Mem: 507932 416572 91360 0 40636 287284 -/+ buffers/cache: 88652 419280 Swap: 779144 160 778984 o/p of "top" command is top - 14:31:52 up 2 days, 1:12, 2 users, load average: 0.00, 0.00, 0.00 Tasks: 74 total, 1 running, 73 sleeping, 0 stopped, 0 zombie Cpu(s): 1.7% us, 0.0% sy, 0.0% ni, 98.3% id, 0.0% wa, 0.0% hi, 0.0% si Mem: 507932k total, 416772k used, 91160k free, 40612k buffers Swap: 779144k total, 160k used, 778984k free, 287268k cached In the /var/log/messages there are no errors But in the /var/log/httpd/error_log it is showing a long list of same error i.e" an unknown filter was not added :PHp".in this way my server is responding very slow for ftp and while accesssing through http.will u pls help me to solve this problem.
View Replies!
View Related
Midphase Server Frustratingly Slow
I'm based in the UK and recently I purchased a midphase ns01 dedicated server. All was going well until I decided to test out downloading a file from the server. The transfer rate on the download was and still continues to be terrible. (I did a traceroute and ping on the server as shown below.) My ISP is AOL with a connection speed of 100 mbps. Heres the traceroute and ping of my midphase server... Midphase traceroute Tracing route to ---.com [000.00.000.000] over a maximum of 30 hops: 1 * * * Request timed out. 2 40 ms 38 ms 38 ms host-000.00.000.000.as43234.net [000.00.000.000] 3 44 ms 42 ms 40 ms 000.00.000.000 4 42 ms 41 ms 41 ms xe-10-3-0-scr001.log.as13285.net [78.144.2.135] 5 41 ms * 51 ms Opal-ge-2.2.0.mpr1.lhr2.above.net [213.161.78.209] 6 115 ms * 109 ms so-0-1-0.mpr1.dca2.us.above.net [64.125.27.57] 7 113 ms 111 ms 113 ms xe-1-1-0.er1.iad10.above.net [64.125.26.238] 8 202 ms 110 ms 110 ms dcp-brdr-03.inet.qwest.net [63.146.26.61] 9 190 ms 191 ms 192 ms tuk-core-01.inet.qwest.net [67.14.4.106] 10 190 ms 190 ms 191 ms tuk-edge-09.inet.qwest.net [205.171.11.70] 11 197 ms 194 ms 195 ms te2-1.cer02.sea01.seattle-datacenter.com [65.112.24.22] 12 195 ms 197 ms 195 ms po02.fcr01.sea01.seattle-datacenter.com [67.228.118.138] 13 * 239 ms 240 ms 000.00.000.000-static.reverse.softlayer.com [000.00.000.000] Trace complete. Midphase Ping Pinging -------.com [000.00.000.000] with 32 bytes of data: Reply from 000.00.000.000: bytes=32 time=199ms TTL=51 Reply from 000.00.000.000: bytes=32 time=195ms TTL=51 Reply from 000.00.000.000: bytes=32 time=192ms TTL=51 Reply from 000.00.000.000: bytes=32 time=189ms TTL=51 Ping statistics for 000.00.000.000: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 189ms, Maximum = 199ms, Average = 193ms ======================================================== I was just wondering if anyone based within the uk was experiencing similar problems with midphase or perhaps has some suggestions as to how I can remedy this problem?
View Replies!
View Related
Slow Response Time From Server ...
I have a dedicated server that I am renting that appears to randomly respond very slowly for some reason (pings are between 90-4000ms with about 75% packet loss). This has been happening lately (about once a week for the past 4 weeks) and I thought I had originally found the cause of the problem but it appears I haven't. Originally, when this problem was happening we were getting an abnormally high about of traffic but a reboot always fixed the issue. I've checked every where I can think of but I cannot find anything out of the ordinary. ight now we're averaging less than 2Mbps in traffic, the CPU load is less than 0.75, the memory usage is at 55% with no swap being used, Apache connections are normal, no active SSH, FTP, or mail connections, I've restarted all services which had no impact, I've checked the access and error logs but can't see anything out of the ordinary. I have a ticket open with the data center but I'm trying to figure this out on my own to fix whatever is causing this so I can move my data over to a new server we just got setup over the weekend in a local data center.
View Replies!
View Related
Server Slow After Using Mail Function
I used the mail function in php to send mails to my 25000 members in a loop.. After using it my server has gone very slow.. Load has increased a lot from 2 to around 20.. Major load is taken by sql and then httpd (both have increased).. I had restarted mysql and httpd.. even reinstalled apache but no help..
View Replies!
View Related
Server Going Slow For No Apparent Reason
I have a dual processor, dual core server with 12GB memory.. It uses less than 4% CPU utilization and less than 5% memory utilization, but for some reason It's really slow to load sites... I know this isn't much information, but would any have any ideas as to what could cause the slow speed? If is anyone is available to look at it, I'll pay you (obviously).
View Replies!
View Related
Dedicated Server A Bit Slow
My dedicated server starts to be a bit too slow. But on Munin it seems just fine. what can i do to solve this problem ? This is the link to munin : [url] and this is what i have : Quote: Tier 1 Bandwidth: 2000GB Operating System **Select One**: Ubuntu Server Edition (6.0x) Memory: 6144MB RAM Uplink Port Speed - Disc: 100mbps Processor: Dual Processor Dual Core Xeon 5160 3.0GHz Woodcrest 2 x 4MB cache
View Replies!
View Related
How To Prove Your Web Server Is Too Slow
How can I prove to my web hosting company that the server is extremely slow and overloaded? If I call support, they are saying that it is fine for them. But I've checked with different internet connections and it's slow. I want to be moved to another server or get a partial refund or something. At this point my website is unusable during peak business hours.... and I get barley any traffic.
View Replies!
View Related
Slow Server Response Time ....
I recently made a shift to FDC for one of my servers that I use for downloadable content. I went for a $199 server with a 100mbps shared bandwidth port. Now, the only problem I seem to be having with it is that downloads appear to be, I would say recognized, very slowly by the server before they start, however, once the download starts I get a full speed. This usually happens during peak times. I'm using about 10/15mbps on the server according to my cPanel statistics. I just wanted to ask here prior to contacting FDC on this, whether this slow server response time has something to do with the bandwidth port, or perhaps the server's RAM, CPU, etc? Given I'm using quite minimal bandwidth on the port, should I consider having them fix this or upgrade the server instead? And if I had to upgrade, would I need to upgrade the port or the RAM, or both for this?
View Replies!
View Related
My Server Works Slow But It's Ok Of Memory
My server is hosted within a Virtuozzo VPS Server, and it runs very slow. Sometimes, when I type commands via shell, it takes 1-2 seconds to be echoed. I've just checked free memory ('free -m') and it seems to be ok: Code: free -m total used free shared buffers cached Mem: 8104 7642 461 0 220 3979 -/+ buffers/cache: 3443 4661 Swap: 4094 0 4094 If I check "ps -ef" I don't see any weird process and with "top" the most memory-wasting process is 'mysqld' (0.8%). Which extra parameters might I check?
View Replies!
View Related
Slow Server - DoS Attack
My server (Xeon 3.0Ghz) went down for no reason yesterday and ever since it was rebooted (and I've rebooted a couple of times since then), pages load extremely slowly or just timeout. Server load is constantly hovering around 1 and top stats indicate that the server's resources are not under heavy load, which is contrary to the usual pattern during peak times. I've checked netstat and I notice a lot of SYN_RECV. Could this be a DoS attack? If so, what steps do I take to stop it?
View Replies!
View Related
Slow Virtual Private Server (VPS)
The subject line pretty much sums up my major problem. My site has been intermittently slow (somtimes slow, sometimes not) for... like since I can remember. So my site isn't that big Sometimes for me it takes forever to load a vbulletin page, or even the main page of the site. I thought I had found the problem (a mysql-intensive script), removed it, improved things quite a bit, but there is still a long way to go! Many site users report the same exact things. "The site is sloowww" ... "It wasn't slow yesterday but it is today" ... "Today it's really fast, but last week I was having problems pulling up pages". Its fustrating becase this is a VPS, and although I know how to use Cpanel, WHM is really big and I am not sure what I could do to speed up my website or to even begin to locate any potential problems. My site is basically Joomla CMS, vBulletin BBS and 4images image gallery. The later two use a common user database. My current mysql usage is 327.55MB in total. Apache 1.3.34, PHP 4.4.1 and MySQL 4.1.19-standard. Powered by WHM/Cpanel & Virtuozzo. What should I do? Where can I start? Where can I look?
View Replies!
View Related
High Server Load And Slow Performance
I am currently hosting my website on one server with the specs: 2.8ghz Dual Quad-Core processor + 8 gigs of ram + two 500 hard drives with a 50 mbps unmetered bandwidth package. My current problem lies in high server loads and very slow server performance throughout the day. I am considering migrating over to The Planet onto server with the specs: 3.0ghz Dual Quad-Core + 18 gigs of ram + two 50gb hard drives with 2TB of monthly bandwidth transfer. In an attempt to have great bandwidth pricing and server performance, I plan on downgrading my current server with my current host to a lowe-end server and keeping it only to host my VIDEO and MUSIC files with the 50mbps unmetered package. The Planet will then host my database and all other web related files on their new server. Is this a good idea as an attempt to save money in bandwidth costs and eliminating my server lag issues? I was offered a setup of a separate web and database server at my current host but from what I have read, no one touches the performance and reliability The Planet has to offer.
View Replies!
View Related
Server Network Speed Gets Very Slow Then Unconnectable
I have a server with a overheating problem and a network problem. (With a lot of users connecting to it every second) Well, recently the server started to get slow then finally it was up on KVM but network connections do not work. After reboot, it works for around 10+ hours but it won't last for a day as it gets slower then unconnectable. When I look at the logs, I see this: Mar 5 00:38:35 cn1 kernel: printk: 769 messages suppressed. Mar 5 00:38:36 cn1 kernel: dst cache overflow Mar 5 00:38:39 cn1 kernel: CPU0: Temperature above threshold Mar 5 00:38:39 cn1 kernel: CPU1: Temperature above threshold Mar 5 00:38:39 cn1 kernel: CPU1: Running in modulated clock mode Mar 5 00:38:39 cn1 kernel: CPU0: Running in modulated clock mode Mar 5 00:38:41 cn1 kernel: printk: 709 messages suppressed....
View Replies!
View Related
Can Uptime Monitoring Services, Slow A Server?
Does websites uptime monotoring tools and services like for example: pindom, siteuptime or host-tracker can in any way affect the server or vps performance of the website being monitor. I think that a Monitor service that do a test every 30 minutes dont cause any inpact, but if the interval on check test is every 1 minute. Can this every minute check affect in any way the performance of a server or vps?
View Replies!
View Related
My Server Has A Low Load, And Still Runs Slow.
My server has a small load (about 30% of it is being used) and it is still running very slow. When I reboot it runs fast for about 5-10 min, and then it is back to slow. I reported this to hivelocity and the responded with " The problem was one of your apache process was pegged out. Restarting apache resolved this issue. If you still have issues check top and run lsof on the process ID that is pegged out." and after it continued "It will continur to happen until you isolate the source of the issue and stop it. The load looked fine just now, so I am not seeing an issue. What you can do is when it pegs out (simply restarting webserver will get it back up but not resolve) run the following command: ps -aux Look through the processes to see what is calling it." Whn I run ps -aux i see a username on my server. i suspended that username but the problem is still happening.
View Replies!
View Related
Server Load Is Low But Site Is VERY Slow
My machine is pretty good. Here are the specs: Intel Xeon-Woodcrest 5148-DualCore 3 gigs of ram 250GB Western Digital WD Cavia I run a forum with a modest amount of traffic along with a content management system handling the other sections of the website. I'm pretty sure the forum isn't the problem though. The server load for this machine is almost never above a 1. Right now as I type this the load is at 0.17, but it's unbearably slow! Taking up to 16 seconds to load a single page. What could be causing this? I'm a server n00b. Is there a setting I should be doing to one of my servers configuration files to make it run faster? My website gets 30-40,000 visitors a day and these problems always occur during peak hours. It would be easier to deal with this though if not for the fact that the server load is always so low. How is it possible for the site to get so slow while the server load is always so low?
View Replies!
View Related
Putty SSH Slow Open A Connection FROM ANOTHER SERVER
I am using Putty to connect to my server via ssh. When opening a direct connection, i can login quickly without any problem Quote: login as: gracie gracie@server1's password: Last login: Thu May 7 07:31:26 2009 from 192.168.0.5 gracie@server1 [~]# sudo su - Password: root@server1 [~]# When I open a connection FROM ANOTHER SERVER, I have to wait more than 20 seconds Quote: login as: tech2 tech2@server2's password: Last login: Thu May 7 07:32:07 2009 from 192.168.0.5 tech2@server2 [~]# ssh gracie@192.168.0.222 Password: After I enter the password, I waited 20 seconds before I am logged in.
View Replies!
View Related
CPU Load Low, Server Slow, Need More Ram
My server gets 300 - 600 concurrent connections to http port 80, has a CPU load of 1 - 2%, has practically all RAM of 1 GB used, is running apache 2 and centos 5. It tends to get slow and when I ban IPs that use many connections to my server (raping it), it becomes fast again. But soon after that new ******* users come which I again ban and the process repeats itself I'm starting to think that maybe I just don't have enough RAM to handle them because it seems at least some of those users are legit. I don't however have even that much content that needs to be cached so I'm not sure what good RAM would do but perhaps apache just needs more.
View Replies!
View Related
SLOW Connection: 2 Webservers Using A Single Database Server
I am developing an application on a load balanced network. It is configured as follows: Webserver1, Webserver 2 (Fedora 5 - Linux, Apache, Zend Opt, PHP) and a DataBase Server (MySQL) When the webserver attempt to use the Database server the connections and page output are REALLY slow! The database server is within the webservers local intranet - so I thought it would be a lot faster. ---------- Here is a quick test: : : Testing Database Connection on localhost Connecting to Database... 0.00054502487182617 seconds SELECT * FROM users... 0.00076389312744141 seconds Testing Database Connection on '192.168.1.200' Connecting to Database... 19.998768091202 seconds SELECT * FROM users... 0.0021719932556152 seconds 20 seconds to connect to the database server...
View Replies!
View Related
DNS Domain Name Server Manager In Windows Server 2008
I have been searching everywhere trying to find a tutorial but It is not going anywhere. Basically I need to create 2 nameservers for Godaddy and pretty much so when i type http://mysite.com it goes to my site. I can access everything from http://myip and everything works. Now is there a step by step on how to actually do it in the DNS Manager? I need help like what IP address do I use is it the router ip? The external IP?
View Replies!
View Related
Media Server Running Windows Server 2003 Std: Yes Or No
Most people probably run Linux on their media servers, but since I don't know much about Linux and the media server we have is unmanaged, I was wondering how you guys feel about running Windows Server 2003 Std on a media server instead of Linux. We'll only be using the server to host Flash video files (.flv) and we'll be serving those vids on websites hosted on other servers, resulting in approx. 50,000-100,000 media views per day (filesizes range from approx. 5MB to 10MB). We don't want to run Windows Media Services, just a Web server (IIS6) and have the Flash video players on the external websites take care of the streaming/downloading part.
View Replies!
View Related
Is This Slow For A 100MBPS Powered Virtual Private Server (VPS)?
I'm currently transferring my files from my VPS Servers. The Source file is from this VPS; Windows Server 2003 100MBPS Port Hosted at ServerComplete's Atlanta, GA DC. and I'm downloading the file from; Centos 5.3 w/ Cpanel 100MBPS Port Hosted at Futurehosting's Dallas, TX DC So the question is, Is it slow to get only around 300-800k/s download speed on a 100MBPS port powered VPS? .....
View Replies!
View Related
Dual Server Setup For Vbulletin Result Slow Load
I just added a database server in private network and moved the database for Vbulletin Forum to this server. But some how, the Forum is loading extremely slow compare to before ( when it was on the localhost). Also, Compare to another website on server (using local database) it is much slower. One thing good is the load is lower 2 servers are connected via 10mbs private link, both servers are at Softlayer. webserver: Opteron 170, 2GB RAM, 73GB SCSI 15K database: Quad Xeon 3220, 2GB RAM, 73GB SCSI 15K.
View Replies!
View Related
Samba Server :: Can Linux And Windows Exist On The Same Server?
I have a linux server for a video sharring site The video encoder that I prefer to use will only work in a windows enviorment The windows server would pass off the converted video to the Linux server. Will a Samba server for Linux allow a Linux machine to connect and share files with a Windows machine work for this application. Although it's probably a dumb question but can Linux and Windows exist on the same server?
View Replies!
View Related
Create Web Server Using Windows 2003 Server
I have three machines in network. One is server with Windows 2003. And rest two are having Win XP Professional and MS Office with Publisher. I want to create website using Publisher on one machine and put to Web server created on Win 2003 server. So that other machines on the network can browse my thsi local website.
View Replies!
View Related
ODBC Connection From A CPanel Server To A Windows Server
if it's possible to use ODBC to connect to a Windows box from a Linux cPanel server. We have attempted connections from PHP (both as CGI as well as Apache module) and we get: Fatal error: Call to undefined function odbc_pconnect() in... and Fatal error: Call to undefined function odbc_connect() in... Is ODBC possible on cPanel servers?
View Replies!
View Related
Windows VPS Slow Internet Through RDC
With Remote Desktop Connection download/upload speeds seem to be capped to barely anything like 50 KB/s. But going to speedtest.net (still in remote desktop) the server reads like 3600 KB/s. It seems like my host is smartly throttling my connection. Is there any way to get around this?
View Replies!
View Related
Windows 2003 Clock Was Right, Now It Slow An Hour
I am running windows 2003, and I patched it with the timezone windows update, everything was fine, but when I looked today, the clock is one hour slow. But when I run my php scripts, it shows the time being correct. I thought php grabbed the time from the system? Perhaps this is just a bug with the clock, and the internal system time is correct? It is the only thing I can think of.
View Replies!
View Related
Windows 2003 CPU Irratic + Slow Machine
I run mdaemon mail server and IIS6. Recently the machine started acting real freaking slow and I noticed that mdaemon was taking up 25-50% cpu almost all the time. When browsing through my computer/explorer, it takes a number of seconds (about 5-10) to show all the folders as you drill down any directory tree. Also, when you right click on any folder/set of folders/set of files/individual file, it takes a good 5 seconds for the right click menu to show up. The entire machine is just going butt slow for some reason and I'm at a total loss as to why. Here are a few bits of info regarding how the machine responds to things. If I reboot the machine, its totally fine for a short time... mail takes up the usual 1-5% cpu and all folder browsing is normal and speedy. When the machine does become slow as crap, if I turn off the mail server, the machine still runs super slow, nothing changes really. The folder browsing takes forever still and so does right clicking anything. I've done a full virus scan, and nothing. I'm not sure what else to do, but there are no processes running that are taking up a lot of cpu or ram that might be programs causing problems. Bandwidth is not being eaten up either, its on a T1 and on average does about 5-10GB of total IN/OUT bandwidth and that has not changed. I'm not stupid when it comes to computers, but I'm at a total loss as to what could be causing this.
View Replies!
View Related
Windows 2008 Versus Windows 2003 Server
With Windows 2003 server, there are comprehensive lists of what you need to do to secure the server before use. For Windows 2008, I wonder is there such a list? Or is it true as what I heard from Microsoft that it is already secured out of the box? Anyone has any resources on the hardening or preparation of 2008 for server hosting uses?
View Replies!
View Related
Windows Media Server & Web Server
I have a company that wants to stream some live events via Windows Media Encoder/Windows Media Player. I believe the best route is to use a WMS, stream to the WMS, then the CDN would pull from there for events. Can someone help me explain a Windows Media Server versus a web server? Can you host web sites on a WMS? Is WMS just an extension to a regular Windows 2003 server?
View Replies!
View Related
|
TRACKER
