I have configured samba on my server but when i access shared directory but i can't its gives error.......
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.25b-1.el5_1.4]
Server not using user level security and no password supplied.
tree connect failed: NT_STATUS_BAD_NETWORK_NAME
trying to get into my horde or squirrelmail account on my server and getting the following:
A fatal error has occurred
DB Error: connect failed
Details have been logged for the administrator.
i have a vps
and all my site not working!
i got this error:
rndc: connect failed: 127.0.0.1#953: connection refused
i got this error :
rndc: connect failed: 127.0.0.1#953: connection refused
oot@server [/]# rndc status
rndc: connect failed: 127.0.0.1#953: connection refused
root@server [/]# /etc/init.d/named status
rndc: connect failed: 127.0.0.1#953: connection refused
named is stopped
root@server [/]# /scripts/fixndc
Named could not be restarted, any obvious config errors should show up below this line.
No critical problems found, will attempt to regenerate keys regardless.
warn [fixrndc] /usr/sbin/rndc status failed: rndc: connect failed: 127.0.0.1#953: connection refused
Creating rndc.conf
Creating /etc/rndc.key
warn [fixrndc] /usr/sbin/rndc status failed: rndc: connect failed: 127.0.0.1#953: connection refused
Restarting named
warn [fixrndc] /usr/sbin/rndc status failed: rndc: connect failed: 127.0.0.1#953: connection refused
/scripts/fixrndc failed to fix the rndc key (or named is otherwise broken), please investigate manually
and i have try to reload the rndc but i got this error :
root@server [~]# rndc reload
rndc: connect failed: 127.0.0.1#953: connection refused
my vps info : linux os - centos , using cpanel , apache , mysql ....
root@server [~]# uname -r
2.6.18-028stab064.7
httpd failed @ Thu Jul 30 15:55:02 2009. A restart was attempted automagically.
Service Check Method: [tcp connect]
Failure Reason: Timeout while trying to connect to service
and
httpd failed @ Thu Jul 30 15:29:57 2009. A restart was attempted automagically.
Service Check Method: [tcp connect]
Failure Reason: Unable to connect to port 80
I have tried everything I know (I know not much)
I have rebooted it multiple times. I have terminated lots of account and now I have only 2 or three accounts.
I have removed all the fishy scripts. Done everything I can.
But it just becomes un responsive within a minute of re booting.
Its a Pentium 4 Single Core server.
1GB Ram and 160GB harddisk with cpane+WHM.
I get error
cpsrvd failed @ Thu Dec 11 19:50:43 2008. A restart was attempted automagically.
Failure Reason: Unable to connect to port 2086
I cannot even connect to server because within minutes the server hangs.
Start thinking to build Family tree website.
Question:
Is there template available? What is the recommended Web designer software for this purpose (Foum, upload/download video/picture).
I simply take my WiredTree VPS for granted as it just runs, and runs, and runs with no worry or concern on my part.
However, when support is required, it is absolutely top-notch. I recently needed to set up an ftp account via cPanel. I ran into a strange problem with cPanel where it wouldn't accept a password as it didn't conform to the required security rating - and I had no idea how to achieve that rating (cPanel documenation could use enhancement). Anyhow, I've learned that it just isn't worth banging my head against the wall to figure something out, when I've got the WiredTree support team to rely on. I opened a support ticket and after a few exchanges (one would have been enough but I tend to beat a dead horse) the problem was taken care of.
All of my support tickets have been handled within unreal (insane for that matter) response times - even low priority requests get handled within just a few minutes.
The network is absolutely rock solid - the only downtime I experienced was for scheduled maintenance and was for only a brief while.
My hosting experience with WiredTree has been flat out the best hosting experience I've even had in the 13 years or so that I've had servers hosted for me. I only have a low-end VPS (384) with them, yet I feel as if I'm being treated the same as the guy with a complex turbo-hyper-cluster with chrome and white-sidewall tires.
does Wired tree own apthost?
[url]
[url]
I have a zone.net VPS with 1152mb of RAM.
I don't resell, I am using the VPS for personal use to run a small vBulletin board (30-60 members on at a time), a Mambo site that is used to aggregate news (12,000 or so news items), and then a couple small personal static sites, and about 25 email addresses.
My VPS has the following versions listed in WHM:
WHM 11.11.0 cPanel 11.15.0-R17853
CENTOS Enterprise 4.5 i686 on virtuozzo - WHM X v3.1
It is currently setup with the default update settings that came when Zone.net set it up, which are:
cPanel/WHM Updates = Manual Updates Only (STABLE tree)
cPanel Package Updates = Automatic
Security Package Updates = Automatic
Question 1:
So, for the type of site I am running, is the stable tree the best? While it is a small vBulletin community, lack of down time is my main goal, so I need to balance getting updates fast enough to keep it secure, but not getting 'bleeding edge' bugs introduced. Which tree is the best balance?
Question 2:
Should I be running automatic updats on cPanel/WHM or keep it manual and check here and other forums for important updates?
Question 3:
I recently had a problem where Horde stopped working. Zone.net's support staff helped me, and suggested two things to attempt to fix it, and this "/scripts/fullhordereset" fixed it. So, since I am new to VPS's and more specifically, working with Linux, how to I learn/research things like this in the future. Should I be checking out forums/communities for each individual app (like Horde), or is there a better option?
Question 4:
Unfortunately, I don't know what I don't know. Such as what tree to run, when to do cPanel updates, when to do Apache updates, how to make sure all my configs are right. Any suggestions on how to both make sure my WHM is configured the best way for my purposes, and more importantly, what is the best way of moving from WHM
I'm currently trying out SAMBA, and having a few last minute issues:
I got both of my centos servers to run samba fine, the mount from serverA to serverB is great... the only problem is that it can't DIR/LS the mounted/shared folder for browsing and viewing. Here is my current smb.conf:
[global]
netbiosname = superpix
security = USER
password level = 4
os level = 64
domain master = yes
local master = yes
prefered master = yes
browsable = yes
writable = yes
locking = no
case sensitive = no
default case = lower
preserve case = yes
short preserve case = no
encrypt passwords = Yes
workgroup = superpix
[homes]
read only = no
browseable = no
[shared]
path = /san
interfaces = eth1 lo
hosts deny = ALL
hosts allow = 10.222.0.
browseable = yes
write list =root, admin
create mask = 0644
directory mask = 0777
public = yes
valid users = admin
I'm not sure what I'm doing wrong... but I can access the files in that folder fine from another server, i just can list/dir the darn thing.
how can we ridiculously speed up SAMBA connections?
View 6 Replies View RelatedThis is a little samba guide from my own experiences of how to map a network drive under windows 2000 to a Linux server. I am not technical expert and this guide is the result from my trail and error.
What's Samba?
Samba allows Linux computers to share files and printers across a network connection. By using its SMB protocol, your Linux box can appear in Windows Network Neighborhood or My Network Places just like any other windows machine. You can share files this way, as well as printers. By using samba on my home network, for example, my Windows machines have access to a printer directly hooked up to my Linux box, and my Linux box has access to a printer directly hooked up to one of my Windows machines. In addition, everyone can access everyone else's shared files. You can see how samba can be very useful if you have a network of both Windows as well as Linux machines.
My OSs
Windows 2000
RHEL 3 (Redhat Enterprise Linus)
My goal
Map a network drive to Linux servers, so that I can access the Linux files under windows 2000.
Installation
Most Linux should have Samba already installed. But if it hasn't install, you can find at in http://rpmfind.net or using up2date command "up2date -i samba". You can also get it at http://www.samba.org
Then you can install it by tying the following Command:
Install:
rpm -i samba.rpm
Upgrade:
rpm -U samba.rpm
Configuration
Samba conf file is located at /etc/samba/smb.conf, allows you to specify which resources on the Linux machine you wish to share and who they can be accessed by.
Samba provide a full version conf if it's fresh install. But most of the times, we don't really need all of these options. So I provide my own conf here, which is rather simple, but it makes things work.
[global]
workgroup = WORKGROUP
server string = LinuxBOX
hosts allow = your_windows_machine_IP
log file = /var/log/samba/%m.log
security = user
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
[Downloads]
comment = Downloads
path = /path_to_your_sharefolder
browseable = yes
writable = yes
public = yes
read only = no
[homes]
comment = My Home Directory
browseable = yes
writable = yes
public = yes
read only = no
[printers]
path = /var/spool/samba
public = yes
guest ok = yes
printable = yes
browseable = yes
writable = yes
read only = no
Just replace workgroup to your windows workgroup name, your_windows_machine_IP and /path_to_your_sharefolder. If you don't need printers sharing, you don't need to have printer section.
Setup Samba Users
Since we're using user level security, we need to setup samba users. This can be easily done by using Webmin. You can go to Server --> Samba --> Convert Unix users to Samba users, you can just covert all your existing Linux users and set them password under the icon "Edit Samba users and passwords" later.
If you don't use webmin, you can also type the following command:
cat /etc/passwd | mksmbpasswd.sh > /etc/samba/smbpasswd
smbpasswd username
Replace username with each of your user's usernames. You will then be prompted to enter a password for this user account.
Samba Service
Now, it's time to start your samba server:
service smb start
service smb stop
service smb restart
Once the computer is restarted or shutdown, the samba service won't start up again in next boot up. I use webmin to make it startup at boot time.
Windows 2000 Configuration
1. Under windows 2000, you can got to windows explorer --> Tools --> map a network drive
2. select drive letter
3. enter the path (e.g. your_server_ipDownloads)
4. click connect using different user name
5. enter your samba usernaem and password that you just set
6. You can connect to your Linux machine now!
This method work for me. If there is any correction or improvements, please let me know.
I'm trying to setup a PDC Login server with SAMBA+LDAP (in separate servers).
How can I test if SAMBA is trying to login properly into the LDAP server?
Im running a redhat server with samba version 3.0.25b..
I dont think it even has winbind, and I need it to join the windows active domain so people can log in and access files etc..
ive searched everywhere to find a nice wget ftp url so i could get the rpm and just install the thing..but is nowhere to be found. I tried installing some random version of the winbind that I COULD find...but no luck, wouldnt work.
I'm struggling hard to integrate a group of windows boxes to authenticate with a Linux samba/ldap server (with personal mapped drives as well).
I get stuck in this error:
root@LittleCode:/usr/share/smbldap-configure# smbldap-useradd -a -m moquist
Error looking for next uid in cn=NextFreeUnixId,dc=activespace,dc=local:value does not conform to assertion syntax at /usr/share/perl5/smbldap_tools.pm line 1071.
root@LittleCode:/usr/share/smbldap-configure#
I am trying to install samba-3.2.1 from source.
To give a short background, I download the src zip and unpack it to local.
go into the file and run a
./autogen.sh
./configure --with-winbind --prefix=/usr/local/samba --with-smbwrapper --with-pam --with-pam-smbpass
make
make install
When I try to run
/usr/local/samba/sbin/smbd -D
I get this message
Error while loading shared libraries : libtalloc.so.1 : cannot open shared object file: no such file or directory
I searched online and found this solution, which sounds like they know what they are talking about..only problem is..I dont!
[url]
We've got a Linux box running ProFTPd reaches a Windows box over SAMBA. This works very well but when the client has a great number of files, the FTP Windows-based FTP clients they use don't always give accurate directory listings (if any at all). I know there's some bug in the way SAMBA works with Windows File Sharing but I don't know what the magic file number is that, when reached, prevents a proper directory listing. Does anyone know what this magic number is or if there's an available, tested fix for this?
View 3 Replies View RelatedI was wondering if anyone has came across this error when dealing with SAMBA.
[url]is the error and the 'fix'.
I have about 50users that can connect just fine, running sp2 (xp pro) but some other users that have xp home or media center can't. There running sp2 and they still get the above error. In the article i need to contact MS for the hotfix...
Any quick fixes other then maybe changing then workgroup?
Netbios is enabled
All can ping the server.
Z drive is OK for use (IE there PC doesnt have a Z drive in use)
I'm currently running SAMBA on one my linux servers, and wanting to connect to it from another linux server.
1. Do I need to install SAMBA on the connecting server (client-side)?
2. I can see/mount the SAMBA folder just fine, I can delete,make,etc. The only thing I can't do on the client side is change ownership of a file or folder... even if I'm logged in as root.
how to preserve permissions the same 1:1 after mounting the remote resource with samba mount cause currectly the permissions are changing.
View 2 Replies View RelatedI think the samba add on for Plesk 12 is not correctly implemented for CentOS 7.To get smb users added I first had to manually install the samba-client, since smbpasswd was missing:
Code:
yum install samba-client Next I had to manually run
Code:
chcon -R -t samba_share_t /var/www/vhosts/my-server.tld/ for each share to be able to access it...
I want to move the entire contents of a directory tree to another directory.
So for example we may have a directory with 15 directories inside, each directory contains files itself. I want to copy all the files from the directory tree into another directory located somewhere else one the file system. I want only the "files" to end up in the other directory and not the file structure too.
Im running CENTOS latest version.
I am trying to isolate different users in a directory and subdirectories.
Case:-
Directory A --> Sub A
--> Sub B
--> Sub C
I want everybody to be able to access "Directory A" but limited access to "Sub A", "Sub B" and "Sub C". How can i achieve that?
Currently, all users that are able to access "Directory A" can go in "Sub A", "Sub B" and "Sub C".
The scenario is like this I have Plesk + IIS + windows server and I want to store Plesk backups to a partition in linux server. So I have created a samba share and mounted it under the windows server. the issue showing is it is not possible to write to samba shared partition.
View 2 Replies View RelatedSamba accesses can be restricted to certain IP / ranges through the access tab in the Plesk Samba extension screen.This builds the /etc/samba/ smb. conf.include file with entered information.All well and good so far.
This file contains the standard 'do not modify...' text, so making manual changes directly here is undesirable. In Plesk are some Linux commands such as /usr/local/psa/bin/php_handler through which permitted changes can be made from the command line.
Is there a similar command included which would allow a shell script to make changes in a supported manner like the /usr/local/psa/bin/php_handler file does? any changes the script makes can be seen in the Plesk Panel and unless admin changes them through the panel will be persistent.
I have a rented VPS with 2TB of disk space and a plesk license in order to host the sites that i develop and my sites, and found myself with around 1.8TB of free space, plesk samba management and plesk vpn management but with few missing pieces for my idea. My idea was to setup vpn tunneling between my laptop and desktop to plesk server and access samba share from the server like they were in my LAN.In the firewall I have opened only the classic mail and web ports (obviously plesk access too).
View 2 Replies View RelatedI have a linux server for a video sharring site
The video encoder that I prefer to use will only work in a windows enviorment
The windows server would pass off the converted video to the Linux server.
Will a Samba server for Linux allow a Linux machine to connect and share files with a Windows machine work for this application.
Although it's probably a dumb question but can Linux and Windows exist on the same server?
is to use windows authentication, to connect to the site, and connect to MS SQL with the same user.
I read on the net (http://msdn.microsoft.com/en-us/library/ms998358.aspx), and it said I should go to my default sites properties, to to the "directory security" tab, and make sure "Integrated Windows authentication" is the only box that is checked.
I did that and now I cant connect to my site...
When I try to connect, it bring up a windows user name and password box. I put a user name and password in, but nothing...
Iv double checked the user exist, and still nothing...
I REALLY REALLY need to connect to my FTP on 1and1 and for some reason it seems to be down. Is anyone else having this problem?
View 2 Replies View RelatedThis week connectswitch's service has not been that good. Basically first they restart the node without prior notice and our vps was down for 7 hours. and now we buy our cPanel license via them and they havent paid it so the license is now expired although we have paid them for it.
View 11 Replies View Related