R=localuser T=local_delivery Defer (-52): Retry Time N$
May 17, 2007
I've seen a lot of these messages in my exim main log:
R=localuser T=local_delivery defer (-52): Retry time n$
I do not know why. I can however still send/receive mail but I want to make sure there is no valid mails being filtered out or such.
I've done:
/scripts/mailperm
/scripts/eximup --force
My domains are in:
/etc/localdomains
/etc/remotedomains does not exist
WHM > EXIM config I only have this checked on:
Verify the existence of email senders.
EXIM config file:
Code:
untrusted_set_sender = *
local_from_check = false
#local_sender_retain = true
timeout_frozen_after = 2d
ignore_bounce_errors_after = 12h
domainlist rbl_blacklist = lsearch;/etc/rblblacklist
domainlist rbl_bypass = lsearch;/etc/rblbypass
hostlist rbl_whitelist = lsearch;/etc/relayhosts : partial-lsearch;/etc/rblwhitelist
message_size_limit = 20M
#log_selector = +arguments +subject
log_selector = +all
#!!# ACL that is used after the RCPT command
check_recipient:
# Exim 3 had no checking on -bs messages, so for compatibility
# we accept if the source is local SMTP (i.e. not over TCP/IP).
# We do this by testing for an empty sending host field.
accept hosts = :
# Accept bounces to lists even if callbacks or other checks would fail
warn message = X-WhitelistedRCPT-nohdrfromcallback: Yes
condition =
${if and {{match{$local_part}{(.*)-bounces+.*}}
{exists {/usr/local/cpanel/3rdparty/mailman/lists/${lc:$1}/config.pck}}}
{yes}{no}}
accept condition =
${if and {{match{$local_part}{(.*)-bounces+.*}}
{exists {/usr/local/cpanel/3rdparty/mailman/lists/${lc:$1}/config.pck}}}
{yes}{no}}
# Accept bounces to lists even if callbacks or other checks would fail
warn message = X-WhitelistedRCPT-nohdrfromcallback: Yes
condition =
${if and {{match{$local_part}{(.*)-bounces+.*}}
{exists {/usr/local/cpanel/3rdparty/mailman/lists/${lc:$1}_${lc:$domain}/config.pck}}}
{yes}{no}}
accept condition =
${if and {{match{$local_part}{(.*)-bounces+.*}}
{exists {/usr/local/cpanel/3rdparty/mailman/lists/${lc:$1}_${lc:$domain}/config.pck}}}
{yes}{no}}
#if it gets here it isn't mailman
#sender verifications are required for all messages that are not sent to lists
accept domains = +local_domains
endpass
#recipient verifications are required for all messages that are not sent to the local machine
#this was done at multiple users requests
message = "The recipient cannot be verified. Please check all recipients of this message to verify they are valid."
verify = recipient
accept domains = +relay_domains
warn message = ${perl{popbeforesmtpwarn}{$sender_host_name}}
hosts = +relay_hosts
accept hosts = +relay_hosts
warn message = ${perl{popbeforesmtpwarn}{$sender_host_address}}
condition = ${perl{checkrelayhost}{$sender_host_address}}
accept condition = ${perl{checkrelayhost}{$sender_host_address}}
accept hosts = +auth_relay_hosts
endpass
message = $sender_fullhost is currently not permitted to
relay through this server. Perhaps you
have not logged into the pop/imap server in the
last 30 minutes or do not have SMTP Authentication turned on in your email client.
authenticated = *
deny message = $sender_fullhost is currently not permitted to
relay through this server. Perhaps you
have not logged into the pop/imap server in the
last 30 minutes or do not have SMTP Authentication turned on in your email client.
#!!# ACL that is used after the DATA command
check_message:
# Enabling this will make the server non-rfc compliant
# require verify = header_sender
accept
nobody@lsearch;/etc/localdomains "${if !eq {$header_From:}{}{$header_sender:$header_From:}fai l}" Fs
That's just a copy/paste from whm exim fields.
dnsreport shows no errors for my domains either
What could be the cause of this error? Is it local or remote (out of my control)?
View 0 Replies
ADVERTISEMENT
May 5, 2009
Getting an error specifically to sympatico ISP in Canada.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
retry timeout exceeded
exim_mainlog shows:
T=remote_smtp defer (-53): retry time not reached for any host
telnet sympatico.ca 25
Trying 206.47.72.104...
telnet: connect to address 206.47.72.104: Connection refused
telnet: Unable to connect to remote host: Connection refused
Port 25 adn 53 are open in my CSF firewall (cpanel server), TCP and UDP (for 53) and TCP for 25.
View 14 Replies
View Related
May 15, 2009
i am getting bounce back email with retry time out error
Error message :
Quote:
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
accounts@mantratec.com
retry time not reached for any host after a long failure period
then i checked exim log & got result as below
Quote:
2009-05-13 03:11:45 1M2l9s-0006LA-L5 == accounts@mantratec.com R=dk_lookuphost T=dk_remote_smtp defer (-53): retry time not reached for any host ...
View 6 Replies
View Related
Jun 3, 2008
Exim on my dedicated have been a very strage comportment. If I try send email for some domains I receive errors as:
========================
root@server01 [/var/spool/exim/db]# mail -v xx@terra.com.br
Subject: lol10
.
Cc:
Null message body; hope that's ok
LOG: MAIN
<= root@server01.xxxx.com U=root P=local S=377
root@server01 [/var/spool/exim/db]# delivering 1K3Ptz-000110-L8
Connecting to mx.terra.com [200.154.55.2]:25 ... connected
SMTP<< 450 Client host rejected: cannot find your hostname, [xx.228.179.xx]
SMTP>> QUIT
LOG: MAIN
SMTP error from remote mail server after initial connection: host mx.terra.com.br [200.154.55.2]: 450 Client host rejected: cannot find your hostname, [xx.228.179.xx]
LOG: MAIN
== xx@terra.com R=lookuphost T=remote_smtp defer (0): SMTP error from remote mail server after initial connection: host mx.terra.com.br [200.154.55.2]: 450 Client host rejected: cannot find your hostname, [xx.228.179.xx]
========================
But My server have RDNS and PTR configured correct.
So If I try again I receive other kind of error as:
========================
root@server01 [/var/spool/exim/db]# mail -v xx@terra.com.br
Subject: ggg
.
Cc:
Null message body; hope that's ok
LOG: MAIN
<= root@server01.xx.com U=root P=local S=375
root@server01 [/var/spool/exim/db]# delivering 1K3Pyt-00014j-3C
LOG: retry_defer MAIN
== xx@terra.com.br R=lookuphost T=remote_smtp defer (-53): retry time not reached for any host
=============================
But If I delete file /var/spool/exim/db/retry and /var/spool/exim/db/retry.lockfile before sending i can send message without any problem. So If I try again some minutes later the problem come back.
View 5 Replies
View Related
Jun 2, 2007
I have been getting this recently...For these two email addresses. Is there something that I can do about this? I've done tons of searching on google and actually putting my error (the one in the title) in quotes brings up like 3 results. All the other results bring up other numbers so...This isn't any sort of dns issue is it? I don't see why it would be but...I would preferably like to get rid of this little error. Has anyone else experienced it before? Thanks!
Code:
2007-06-01 16:06:06 1HtOBC-0006io-0a == jeffnelson@mac.com R=lookuphost T=remote_smtp defer (-53): retry time not reached for any host
2007-06-01 17:06:03 1HttZJ-0003oP-Ff == ssingh@emlab.com R=lookuphost T=remote_smtp defer (-53): retry time not reached for any host
2007-06-01 17:06:03 1HtOBC-0006io-0a == jeffnelson@mac.com R=lookuphost T=remote_smtp defer (-53): retry time not reached for any host
2007-06-01 18:06:03 1HttZJ-0003oP-Ff == ssingh@emlab.com R=lookuphost T=remote_smtp defer (-53): retry time not reached for any host
2007-06-01 18:06:07 1HtOBC-0006io-0a == jeffnelson@mac.com R=lookuphost T=remote_smtp defer (-53): retry time not reached for any host
2007-06-01 19:06:03 1HttZJ-0003oP-Ff == ssingh@emlab.com R=lookuphost T=remote_smtp defer (-53): retry time not reached for any host
2007-06-01 19:06:04 1HtOBC-0006io-0a == jeffnelson@mac.com R=lookuphost T=remote_smtp defer (-53): retry time not reached for any host
2007-06-01 21:06:12 1HtOBC-0006io-0a == jeffnelson@mac.com R=lookuphost T=remote_smtp defer (-53): retry time not reached for any host
2007-06-01 22:06:02 1HtOBC-0006io-0a == jeffnelson@mac.com R=lookuphost T=remote_smtp defer (-53): retry time not reached for any host
2007-06-01 23:06:08 1HtOBC-0006io-0a == jeffnelson@mac.com R=lookuphost T=remote_smtp defer (-53): retry time not reached for any host
2007-06-02 00:06:11 1HtOBC-0006io-0a == jeffnelson@mac.com R=lookuphost T=remote_smtp defer (-53): retry time not reached for any host
View 10 Replies
View Related
Apr 12, 2008
I have a problem with Yahoo defering my email from servers for weeks!
I've submit to [url]
from
[url]
MANY TIMES! this is getting me frustrated. what's more.. i try to change my SMTP to a new server (fresh IP within same network in the same DC) and it is ALSO deferred. How do I check if this has something to do with a whole block of IP maybe listed in some spam engine or something?
View 2 Replies
View Related
Sep 25, 2014
sometimes my server doesn't forward emails to other accounts, and I see in log file:
Sep 25 07:38:55 s17218468 /usr/lib64/plesk-9.0/psa-pc-remote[1151]: handlers_stderr: DEFER
Sep 25 07:38:55 s17218468 /usr/lib64/plesk-9.0/psa-pc-remote[1151]: DEFER during call 'grey' handler
Sep 25 07:38:55 s17218468 /usr/lib64/plesk-9.0/psa-pc-remote[1151]: Message aborted.
If I restart the server it works.
View 3 Replies
View Related
Aug 16, 2008
I am getting the following error message..
R=lookuphost defer (-17): lowest numbered MX record points to local host
View 4 Replies
View Related
Nov 11, 2008
This is a rare issue i have on a RHEL 5.2 + cPanel server.
Server time is:
Tue Nov 11 17:02:51 CST 2008
Squirrelmail time show:
Code:
Last Refresh:
Tue, 5:02 pm
So, that is correct too..
But email arrives with -4 hours time, example:
webmaster@xxx.com 1:03 pm testing email
I already rebooted httpd, exim, and imap server, and the server itself too.. and problem stills.
View 11 Replies
View Related
Jan 6, 2008
I got report from webceo that I have some issues. May someone help me fix this?
DNS Lookup: 0.22 sec
Connect time: 0.33 sec
Host ping: 0.10 sec
That mean too slow with the other sites!
View 4 Replies
View Related
Sep 25, 2008
I can't get access to a certain site. I always get the page with:
network time out - server at *** takes to long to respons. More people have noticed this and apparently it only happens to people with certain specific providers. And not all the time. Some times they DO get access eventy to they belong to the same ISP. So I guess an ISP isn't blocking access to it otherwise it would be permenantly/The site administrator insists that certain ISP's are blocking his site. He's hosting it on his own server. The domain belongs is registered at namecheap.com.
If an ISP is blocking this site (if that's possible?), that would lead to that 'network timeout' page wouldn't it?
What is the most likely reason for getting a timeout page anyway?
View 7 Replies
View Related
Aug 9, 2007
I have a dedicated server specs: AMD 3500+ 64 Bit CPU, 1 GB Ram, 160 GB Sata Drive. For 1 month, CPU load average reaches 40-50 value. This happens about 5-6 times in a day. When I stop httpd service for 30 seconds everything goes normal. I think this is not a DoS attack because it comes systematic, I dont believe no one makes this regularly except bots.
Maybe its a system service or a cronjob but it stops when I turn off httpd service?
How can I be sure about what's making this regularly load?
I also did set up a script which mail me when load average of system goes crazy and restart httpd service. But instant restart is not working to stop load increase.
View 12 Replies
View Related
Feb 6, 2013
The server is going down from time to time, every 12 days or so the site hosted there is no longer accesible, everything starts with the site slowing don and down and then is not longer reachable, what we do is to request a power cycle, and with this we start all over again till next power cycle, so on so on, of course, here are my server details and more info on this:
- MySQL - 5.1.41-3ubuntu12.10
- Apache - 2.2.14-5ubuntu8.4
- PHP - 5.3.2-1ubuntu4.9
- operating system: Ubuntu Server 10.04 LTS
After some time emailing the support guys to barely check about what's going on, we received an email with a few things:
1.- found a few errors that likely would cause issues with Apache. The first error is:
[Mon Feb 04 05:03:10 2013] [error] mod_fcgid: fcgid process manager died, restarting the server and the next error is:
[Mon Feb 04 14:32:34 2013] [error] server reached MaxClients setting, consider raising the MaxClients setting ...
Both these errors seem to indicate that you have a process that is running out of control on your server. We were unable to determine what script on your site is running caused your connections to be maxed out however it does appear that before these errors were generated there was a WordPress plugin referenced in your access logs...
2.- Additionally during our review we did find that your error log for mercadodedinerousa.com is 45 GB's which is excessively large and can cause problems when Apache is trying to write a such a large file.
3.- The majority of the errors being logged are:
[Wed Feb 06 12:12:31 2013] [error] [client 200.76.90.5] Options FollowSymLinks or SymLinksIfOwnerMatch is off which implies that RewriteRule directive is forbidden: /var/www/vhosts/mercadodedinerousa.com/httpdocs/index.pl, referer: [URL]
View 6 Replies
View Related
Oct 25, 2009
I bought a new server ...
It had 2GB RAM, 2.8 GHz processor ,NIC fast Ethernet , 500GB HD.
Window server 2003 standard x64.
4 ip.
The ip ping but I cannot connect to server using remote desktop.
Is this problem related to firewall, or the network it self.
View 6 Replies
View Related
Nov 7, 2008
What if NO down time for VPS?
1. CPU (with Mainboard)
2. RAM
3. HDD
4. SMPS
5. others
with ALL things redundant
** currently my sites (on VPS) are down since couple of hours.. and God knows when they will be live again!
View 12 Replies
View Related
Jul 8, 2007
one day later, if I run the following command again, the command is same as the one run by the first time.
rsync -avz username@IP:/home/asite/public_html/ /home/asite/public_html/
does it mean rsync will just check and copy the newer folders and files from the last copy?
View 6 Replies
View Related
May 27, 2009
I have the same server for 3 years...Over that time I've been reducing the number of sites i have..
Is it time to downgrade?
The spec is below.... On a positive side It's been up for almost 500 days so it's reliable.
Would i be better with a high spec reseller account or a smaller managed server rather than spending $220 per month. I spend at the moment.
I'd even consider paying the same i pay now if i could get a faster more upto date server
2 processors: 2.8ghz pentiums
Ram 2gb
2 160 gb hdd's backup drive has used 96gb
Bandwidth used/available this month 50gb/1200gb
host 100 domains busiest is a forum with 500 members
already moved Moved all videos to Amazon S3
View 12 Replies
View Related
Mar 27, 2009
I have big problem, In my HyperVM i've change time to EUROPA/Sarajevo but in WHM still going 24 hours in forward. Please help me to resolve this. This is very important...
View 5 Replies
View Related
May 2, 2009
from: domaintools.com
Host IP Address Ping Time
1. 206.71.148.249 Timed Out
2. 206.71.148.249 206.71.148.249 126.20ms
3. 206.71.148.249 206.71.148.249 82.35ms
4. 206.71.148.249 Timed Out
5. 206.71.148.249 206.71.148.249 87.01ms
6. 206.71.148.249 Timed Out
7. 206.71.148.249 Timed Out
use: Enotch Networks
this issue from networks (enotch) or from my ISP?
because enotch staff said my ISP problem!
View 6 Replies
View Related
Jun 2, 2009
I'm just wondering what exactly "CPU Time" is, I have searched Google and checked Wikipedia but still do not really understand. The main reason this is bugging me is that MySQL on our database server seems to have a very high "CPU Time" usage.
This is the top part of the output from "top", with MySQL shown:
Code:
[mike@mysql1 ~]$ top
top - 20:26:05 up 222 days, 16:14, 1 user, load average: 2.04, 2.90, 2.36
Tasks: 95 total, 1 running, 94 sleeping, 0 stopped, 0 zombie
Cpu(s): 27.1%us, 12.1%sy, 0.0%ni, 60.2%id, 0.3%wa, 0.0%hi, 0.2%si, 0.0%st
Mem: 2074276k total, 1990828k used, 83448k free, 163012k buffers
Swap: 4192956k total, 60k used, 4192896k free, 1410448k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
26826 mysql 25 0 483m 324m 5504 S 238 16.0 363300:21 mysqld
1 root 15 0 2064 592 508 S 0 0.0 0:01.24 init
2 root RT -5 0 0 0 S 0 0.0 1:13.13 migration/0
3 root 36 19 0 0 0 S 0 0.0 0:00.00 ksoftirqd/0
4 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/0
5 root RT -5 0 0 0 S 0 0.0 0:01.17 migration/1
6 root 34 19 0 0 0 S 0 0.0 0:00.00 ksoftirqd/1
7 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/1
8 root RT -5 0 0 0 S 0 0.0 5:34.93 migration/2
9 root 34 19 0 0 0 S 0 0.0 0:00.00 ksoftirqd/2
View 2 Replies
View Related
Sep 22, 2008
I have mi server in the planet. But I am not very happy with the support you give.
That's why I want to know what is the appropriate time for the response of a ticket?
30 minuts?
1 Hour?
2 hours?
3 hours?
4 hours?
8 hours?
12 hours
1 day?
View 14 Replies
View Related
Jun 27, 2008
What is a reasonable expectation for how long a host should take to reload an OS?
Read on for my story if you want details behind my questions...
Due to a logical but unfortunately incorrect mistake on my part, we ordered a dedicated Windows server with a 64-bit OS. We just found out that the 64-bit OS isn't compatible with a software package and we needed to get the 32-bit OS reloaded in a hurry.
I understand that urgency on my part doesn't necessarily mean it's an urgency on their part, but I am also paying additional for the server reload. I submitted a ticket with the hosting company yesterday around 7PM to get it reloaded ASAP. As of 9AM this morning I didn't hear anything from them one way or another so I signed in to my hosting account only to find that they left a reply to my ticket asking to confirm that I really indeed want a reload with the selected reload options. I never received any type of an email notification of the reply. I was a little miffed that I didn't get any e-mail, but oh well so I confirmed that was indeed what I wanted.
At 10:30 I get an e-mail asking me to reconfirm that my server's physical specs and there is a discrepancy on the memory installed as their records were outdated and showed 1/2 what was really installed. I have to contact my account exec to get that straightened out and I finally get notified that the reload has started around 11:30AM.
I was originally told informally 3-4 hours in a support chat. Here it is 12+ hours after the reload supposedly started and I have heard nothing from them. I tried checking at 5:30PM tonight before I left work what the status was, but the lady I spoke with just repeated the message I got at 11:30AM saying things were underway and that she couldn't give me an ETA on when things would be finished.
Am I unreasonable in thinking 24 hours after I submit the ticket with an priority of "ASAP" is too long? I'll cut some slack for the miscommunication on confirming that I indeed want a reload but even then it's been 12+ hours after they said that they have started and the server when down.
View 11 Replies
View Related
May 19, 2008
Do you consider resolution time guarantee when choosing a host?
What resolution time guarantee does your host offer?
Is one hour resolution ok?
This is what webhostgiant.com offer as their support resolution time.
[url]
View 11 Replies
View Related
Oct 30, 2008
Does is possible to disable ftp capabilities of several websites run by cron at some specified time of the day? then re-enable it automatical at a certain time also?
View 7 Replies
View Related
May 30, 2008
I want to find a web host and i have a couple of specifics that I'd like. Obviously I want the lowest cost for a relatively reliable service. I am looking to get started in my own web development/design business so I want to use this server as a development environment for myself as well as a deployment environment for potential clients.
I want to have SSH access to my space, the ability to host without buying a domain (at first, ill want to get one later), a good number of MySQL databases.
Some things that would be nice would be the ability to resell space for clients, not absolutely necessary though.
Are there any solutions that anyone here could suggest for me? What are some pitfalls and things I should watch out for? What else could I look to take advantage of?
View 16 Replies
View Related
Jul 10, 2008
What's an acceptable time for rebooting a machine?
I send an email to midphase to get my machine rebooted and I wait nearly half an hour. Even put 911.
Pacifirack would have got it done in under 5 minutes
View 6 Replies
View Related
Nov 27, 2007
I'm currently renting a VPS, fingers crossed everything is running just fine.
A Question i go for you is,
Im Looking at upgrading the mysql on the VPS, as im looking at installing xcache
xcache.lighttpd.net/wiki/Release-1.2.0
Would you say this is a good idea or not, as i've heard that xcache can reduce server loads ?
If you think it is a good idea could you point me in the direction of how to upgrade my mysql, can this be done via WHM?
View 5 Replies
View Related