Possible Problem With The Ethernet Of My Dedi
Nov 4, 2009
i have recently get this server , we moved to this server in the same datacenter
Linux OS:centos 5.4
Kernel Version(uname -r) 2.6.28.7
Hardware Information:icore7 920 + 12gb ram
Software Version;csf firewall, ossec Intrusion Detection System, rvsitebuilder
Control Panel(if any)whm+ fantastico
yesterday the dc tech logged-in by ssh (root) cause we couldn't connect to the ftp box we keep our backup's (the new box couldnt connect to the ftp got time out)
They fixed it.
Today i got a time out and after 2 reset and restaring of services the server was back again.Then i got this messages and it still coming (3 hours now i get 1 similar message per 5 second )
Code:
Nov 4 12:31:20 gandalf kernel: martian source 217.20.117.1 from 127.0.0.239, on dev eth0
Nov 4 12:31:20 gandalf kernel: ll header: ff:ff:ff:ff:ff:ff:00:1a:4b:3a:7e:23:08:06
Nov 4 12:31:21 gandalf kernel: martian source 217.20.117.1 from 127.0.0.244, on dev eth0
Nov 4 12:31:21 gandalf kernel: ll header: ff:ff:ff:ff:ff:ff:00:1a:4b:3a:7e:23:08:06
Nov 4 12:31:22 gandalf kernel: martian source 217.20.117.1 from 127.0.0.252, on dev eth0
Nov 4 12:31:22 gandalf kernel: ll header: ff:ff:ff:ff:ff:ff:00:18:71:80:07:86:08:06
Nov 4 12:31:22 gandalf kernel: martian source 217.20.117.1 from 127.0.0.244, on dev eth0
Nov 4 12:31:22 gandalf kernel: ll header: ff:ff:ff:ff:ff:ff:00:1a:4b:3a:7e:23:08:06
Also the firewall stopped the port scanning from a server within the same dc.
I checked it on google and the explanation's varies but most say that is a problem of the router/switch or similar.
View 10 Replies
ADVERTISEMENT
May 12, 2008
Can anyone recommend a product that converts a DS3 to an Ethernet connection?
View 2 Replies
View Related
Aug 12, 2007
In terms of storage, which will provide faster data transfer?
1. A NAS (e.g. Lacie or Thecus) with 1GB port connected to a gigabit switch
2. An external storage that uses USB 2.0 interface
3. An external storage that uses eSata inferface.
Assumption:
All of it use sata drives under a raid 5 configuration.
View 8 Replies
View Related
Oct 1, 2007
would you recommend some PCI with 2 or 4 Ethernet 10M ports?
View 1 Replies
View Related
Jul 22, 2008
Say I have my own office to start building out my own "mini" data center.
If I wanted a lot of bandwidth for the most reasonable cost, how do one go about buying bandwidth from various providers? What is Metro-Ethernet vs. say a DS3? I know there is Fractional DS3 (6 to 45mb/s) and then Ethernet services up to GigE. I'd rather not mess with BGP right now either.
If I am looking at 15-20mb/Sec of bandwidth, what would be a good route to go? My budget is about $1500/month for bandwidth and IP Addresses (I need 2 Full Class-C IP Spaces). I also want to be able to turn up speed as needed without a lot of hassle.
Is this a reasonable budget? And where would be a good place to start? Just call up like Level 3 or am I too small potatoes to even deal with?
View 8 Replies
View Related
Apr 28, 2008
What low-cost Gigabit Ethernet switch would you recommend for providing residential IP services to an apartment complex that is already prewired for copper Ethernet? My only real requirement is that is it a managed switch supporting QoS, capping, and has fiber uplinks.
View 9 Replies
View Related
Jan 18, 2007
I now have to move on to the question of Ethernet ports in relations to rack mount servers. I have just about ever question answered now. Now my question is about the connection to the web my server will use. Is it better to have a single or a dual Ethernet post?
I see a lot of duals. Here are some of the samples I have read when building my server.
2 x Intel® 82546GB Gigabit Ethernet Ports
Dual Onboard Gigabit Ethernet LAN Ports
Dual Intel® 82541GI Single-port Gigabit Ethernet Controller
Broadcom dual Gb NICs
Intel dual Gb NICs
Broadcom BCM5754, 10/100/1000Mbps
I don’t know which one to look at or get?
View 4 Replies
View Related
Apr 17, 2008
I have inbuilt Ethernet card RTL8139D , but when i install RHEL 4 or 5 , Fedora version the Ethernet card diver not installed or ethernet card not installed but when i install suse linux it working fine without any problem so can any one tell me how to install lan card on Fedora or RHEL5.I have driver in CD but it not working with it.
View 1 Replies
View Related
Mar 21, 2008
Say a server has 2 gig-e ports on board, and the OS
is using both. Can I still use IPMI feature? Or do I have
to get an additional ethernet card?
View 3 Replies
View Related
Feb 22, 2007
We're ready to setup 3-4 42U racks for servers and are in need of choosing Ethernet switches. What do you guys use and why?
I'm looked at Cisco switches, but lost in their product forest. I'm looked at Express 500, 2960 and 3750-E models. Is there any more difference (in exception of stacking, cli and hot-swap fan/psu) that I need to consider? Prices differentiate too much.
I'm also looked at Linksys/D-Link business products and they seems to have the same features as Cisco Express series, but only 50% cheaper.
View 14 Replies
View Related
Jul 13, 2007
I've a rack in the datacentre, and actually sharing the ethernet line with another partner's rack.
Something like:
Bandwidth -> Switch 1 -> Switch 2 (partner's rack)
Bandwidth -> Switch 1 -> Switch 3 (my rack)
After a previous uplinks issue, i'm never able to hit above 4Mbps of download speed to my home's cable broadband anymore. I have no idea whether it's because my partner capped my bandwidth from Switch 1, or his usage has increased such that it's affecting my traffic too. I can't be too concerned about it with him, as he's paying the bulk of the bandwidth costs.
For the whole rack, i'm not able to hit above 5Mbps accumulatively, and my normal bandwidth usage is only about 1-2Mbps.
So i'm thinking of getting another line for bandwidth directly from the datacentre to my Switch 3, perhaps starting from just 1-2Mbps only.
How will things improve? Just a silly thought, whether my total available bandwidth can now be 5Mbps + 2Mbps = 7Mbps.
View 10 Replies
View Related
Jul 24, 2008
We have a few CPanel servers, all with multiple NIC's. (2 Each)
We want to setup Eth0 to be the managment interface (ie. 72.2.24.x)
We want to setup Eth1 to be the Shared / Exclusive IP Nic (ie. 67.69.141.x)
Here is the issue, Eth1 is on a totally different Vlan than Eth0.. thus, isolating DDOS attacks, and any other type of traffic concerns for managment.. But, it also has a different G/W as Eth0.
View 1 Replies
View Related
Dec 19, 2008
how to check ethernet connections in debian??
my server has 2 nics, how do I view them and their usage uptime etc in debian stable
I wanna see if they are being used randomly (usage on both), or if it hasn't been already setup and I need to do it (found a tutorial on how to do this, but dont' wanna fix it, if it ain't broken)
View 1 Replies
View Related
Jan 3, 2008
We are in the process of buying a server to co-locate
All the server centre's we look at are trying to charge lots of money for firewalls
We have looked into renting and buying firewalls
but all the bought ones seem to be in the form of 1U
my question is this:
Is it possible to have a firewall that fits inside a 1U rack?
...something like a network card with an inbuilt firewall
does any hardware like this exist or will we need something that takes up a 1u space?
View 0 Replies
View Related
Oct 3, 2007
how can I change ethernet port speed. For example I want to change 100 mbit to 20 mbit. I m using centos 4.5 final.
View 4 Replies
View Related
May 19, 2008
I am testing FEDORA on my localhost server, with dual partition with windows 2003 server,
The problem is, that FEDORA can not install NETWORK CARD driver by default or by selection.
In my Windows device manager i see i am using (realtek rtl8139/810x family fast ethernet Nic), but i can not find its driver to use on linux (fedora)
Can someone guide me how can i make (realtek rtl8139/810x family fast ethernet Nic) use on FEDORA installation.
i have tried searching google ... but can not find linux driver for same...
View 1 Replies
View Related
Feb 24, 2008
login as: root
root@20*.17*.3**.1**'s password:
Last login: Fri Feb 22 15:21:26 2008 from 20*.5*.4*.2*
[root@vian ~]# yum install php-gd
Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
extras 100% |=========================| 1.1 kB 00:00
updates 100% |=========================| 951 B 00:00
base 100% |=========================| 1.1 kB 00:00
addons 100% |=========================| 951 B 00:00
Reading repository metadata in from local files
Excluding Packages in global exclude list
Finished
Parsing package install arguments
Nothing to do
[root@vian ~]#
Does that mean I have installed GD? I am new to this dedi thingy.
View 8 Replies
View Related
Mar 11, 2008
I asked my host to reload/rebuild my dedicated server as I wanted to clear my entire server so that I can used it for a brand new project but I was told that it would cost me $75 per server.
Am I able to engage a freelancer to do it rather than getting my hosting provider? I would also need to change the server hostname from www1.xxx.com to www1.yyy.com and the name server to be changed to ns1.yyy.com and ns2.yyy.com instead of ns1/2.xxx.com. In short, I do not want yyy.com to be traced back to xxx.com at all. I do not want a traceroute, cpanel or other means to link the two site together.
View 9 Replies
View Related
May 12, 2007
About 4 days back i ordered and got a Xeon dedicated box from Softlayer
BUT i am stuck adding one domain. First i tried making a new account for this domain through WHM but problem was not solved, so today i parked this domain to a domain's cPanel account but after that also problem was not solved
So, let me first explain you whole problem. Suppose my domain is my-domain.com
This domain my-domain.com was added to shared hosting account at ace-host.net. But after purchasing dedicated server, i shifted whole site data to new server and changed the nameservers of my-domain.com with new ones and atlast i removed this domain from my Ace-host.net account.
Then i waited for about 2days to domain to propagate with new server's namesevers. But when nothing happened (i checked the domain whois record, they were showing my new server's nameservers), atlast i contacted Softlayer regarding this and after sometime they replied We have given the correct server alias for your domain my-domain.com in apache configuration and it was working fine that monent.
But after sometime i checked that my-domain.com is loading fine but it is taking whole data (including database and templates) from my OLD HOST ... Ace-host.net!
As i have already mentioned that i have already deleted my-domain.com from Acehost account and also updated the my-domain.com's nameservers with new dedicated server's.
And i checked many times WHOIS records from different websites at that moment. All were showing nameserver records of my new server.
I now contacted PSM and they after sometime replied that its working now as they just had to restart dns server.
BUT NOW , today again samething is happening! (on the 4th day)
so, i terminated my-domain.com's account from my server's WHM. and then parked in other domain cPanel account on same (Softlayer) server but still problem is still there!!
Domain is registered at Namecheap.com
NOTE: I am not saying anything against PSM or Softlayer and their support staff. They are both THE BEST in the market! and they have helped me a lot manytimes.
I also have two more domains on this new server and both are working fine from very first day. They are registered with local registrar not with namecheap.
View 3 Replies
View Related
Dec 6, 2007
i've purchased a dedicated box with Plesk webhosting, but i can't get the email forwarding services to work
The domain is registered with Domainsite, set in plesk to forward admin@domain.com to my gmail... and it doesn't work no matter what i try...
First settings i tried( I use domainsite's nameservers and set the dns in there, if you know a better/other way, please reply) blanked out the last 2 chars of the ip just in case
Code:
Record Type Record Host Record Answer TTL Priority (MX only) Create Date
A *.domain.com 84.244.-.- (delete) 300 2007-11-10 07:43:03
A domain.com 84.244.-.- (delete) 300 2007-11-10
well that didn't work, so i figured i needed a MX record
I added:
Code:
MX domain.com 84.244.-.- (delete) 300 10
but it still didn't work( i did wait a few days after each change)
Then i tried the domainforwarder from Domainsite itself
which added 2 records:
Code:
MX domain.com mx0.domainsite.com (delete) 300 10 2007-12-01 12:17:37
TXT domain.com v=spf1 a mx ~all (delete) 300 2007-12-01 12:17:37
but it still doesn't work
i'm also getting mails bounced back with the line: "Reverse DNS lookup for your IP address is failing."
what changes need to make?
View 0 Replies
View Related
Apr 5, 2009
Am curious about Wildwest Dedicated Servers and VPS Servers.
I'd like to know for those of you - your thoughts either way on your experiences Good, bad, what you learned while being there.
1. What you like about Wildwest Servers Dedi or VPS
2. What you don't like about Wildwest Servers Dedi or VPS
And anything else you'd like to throw in.
View 0 Replies
View Related
Jan 3, 2009
I had shortlisted a few, although there may be more choices..
SoftLayer have lesser discount, but they have an excellent DC, hardware & more~
Gigenet have up to 30% discount and 15% at least, which is a plus, but I'm not sure about other stuffs, although they are also pretty reputable around..
LimeStoneNetworks have very little discount, and their servers are cheap, but their specs are pretty much *fixed*, and they do not seem to offer as much as the above..
HandyNetworks have cheap servers too, but they are not as competitive with the above 3, in the sense that they are not much interested to join the competition, remaining on their own track completely..
HiVelocity - No information, although their requirement is pretty simple..
Take2Hosting, although they have really cheap servers, their datacenter isn't as advanced as the others, and... Cogent... IMO more suitable for personal use, small sites etc.
IMO I will prefer SoftLayer, but their servers are quite expensive, so even if I get 4 dummy servers, which cost $119(their cheapest server) and multiple by 4 is $476, and get a server used to sell hosting, it will not be cheap.. However, on the other end, Gigenet has cheaper servers(especially their specials, really better than SL), although their entry server is $154, which I suppose everything will balance out, I just can't think of anything they can be better than SL, in terms of network, support, server administration(I heard and tried SoftLayer's portal to manage the server, it was excellent!) etc.
I will actually love to resell Gigenet servers, since it is a lot cheaper(in terms of discount), and their prices are roughly the same(except SL RAM is more expensive)..
View 14 Replies
View Related
May 29, 2009
ASPnix offers SmarterBundle for FREE with any Dedicated Server Accounts.
Purchase ASPnix Dedicated server TODAY and get SmarterBundle Professional ($747 in value) at no additional cost!
So what do you think of their offer?
View 0 Replies
View Related
Jun 19, 2009
I have non-english languages being showed as ? on different servers / vps.
I have tried "yum install french support" which installed but the problem persist.
On one of the VPS i switched to lighttp and the problem disappears.
I guess it has to do with Apache?
View 0 Replies
View Related
Apr 2, 2009
I would like share my experience with CreativeVPS/CreativeRACK, I've been around this forum for a while now but rarely post and I never shared my bad experiences but sometimes it is necessary to do so that others would know and maybe improve the service people get. Forgive me if I misspell and the bad grammar English is not my first language.
I currently have a a VPS with Servint which is Great
but lately I felt it wasn't enough and was thinking moving up to a small dedi and yesterday (March 31 2009) I found "[CreativeRACK] Closeouts! DUAL CORE / 2GB RAM / 250GB SATA - $59 (Managed!)" under "Dedicated Hosting Offers"
the offer looked good and Joseph r00ter been around the forum for a while now and has a nice posts counts so I decided to go for it so yesterday March 31 2009 I talked to Joseph on the messenger, he was nice and near midnight(thumbs up to Joseph for working late) I ordered the "last" Intel Pentium D 925 for $59.95+$20 cpanel, he emailed me the invoice I paid it right a way.
I woke up in the morning <--thats how I actually look in the mornings , and saw that Servint had upgraded all the packages, which changed things to me and I decided not to move to a dedi and stay some more with servint. so I opened a high priority ticket to cancel the order, before my morning coffee . the response I got was "Payments made to CreativeVPS are non-refundable as it says in our Terms of Service, which you were bound to when you placed the order..." later that day I messeged Joseph but he said the same thing and that they already bought the hardware *reminder* it was closeout clearance sale server* and that I'm obligated to their TOS that stated that there no refunds.
he quoted "Q: Do you have a moneyback guarantee?
A: Due to the amount of fraud orders we get, we do not offer a moneyback guarantee."
from the offer page.
the worst thing in my opinion is that when I stated that there is no visible link to the TOS on their "Legal Information" page which contained AUP and SLA which did not say anything about refunds Joseph just changed the page.
I can post the entire conversation if needed.
Unfortunately I had to open a dispute with Paypal, I hate doing it and before this incident I only charged-back only once (when RegisterFly charged my credit card and closed their business)
aside the legal part there is a right way to run a business and handle clients, this is not it. you need to be fair and honest. and not just profitable.
View 14 Replies
View Related
May 5, 2009
I shut down iptables on my dedi to try to install Poweradmin but, when the install did not work (probably because DirectAdmin was controlling files and processes I needed for the package) I attempted to restart iptables by running "/etc/init.d/iptables restart" and "service iptables start". It didn't restart. I restarted the webserver running "/etc/init.d/httpd restart". I even rebooted the dedi. Still, no iptables.
View 11 Replies
View Related
May 15, 2009
Is there anything like that?
A reseller wants to be alone, server resources, dedicated IP, etc. while doesn't have Sys Admin nor Server management knowledge..
Is there a dedicated/VPS that is fully managed from the Hardware, OS, up to System Admin level, leaving the reseller to just use his reseller account on it?
What is the name of such package? under what name should he look for it? how different is it from Managed dedicated/ VPS?
View 12 Replies
View Related
Jun 1, 2008
I was wondering if it's feasible to run a VPS/Dedi server entirely on lightweight alternatives. I.e:
nginx/lighty/litespeed instead of apache
php/fastcgi or php-litespeed instead of mod_php
tinydns instead of bind
and so on...
Is it a viable solution? Is anyone running their hosts on these alt servers? What is your experience?
I'm specially interested in nginx (lighty has been accused of leaking memory, and litespeed std is feature-limited). What's your verdict on running it as a stand-alone server for php-fastcgi and static contents?
View 6 Replies
View Related
Nov 23, 2008
i am confused which one is better VPS or Dedi ? my budget is very low under $25-20 / Month , I saw some dedi offers for $30/month from prontoserver i think is that Good?
or Go with a VPS? i need 60GB and 400GB of bw so what is the best thing?
View 3 Replies
View Related
Oct 3, 2008
I have been following there posts in the offers section of wht for a few weeks now, I've contacted RN-DAVID a few times about his offers and the response has always been fast and the service sounds good, however i would like to know what everyone else thinks.
I'm looking to order two servers from them with the following specs:
Server 1:
AMD Sempron 3000+
2GB DDR2 RAM
1X 120GB SATA II HDD
1X 160GB SATA II HDD
2 IP Addresses
Windows Server 2003 Std
3TB CAP on a 100Mbps Line
Priced @ £40.95 PM with £20.00 Setup for RAM and Second HDD
This server will just be for my personal use really, I'm planning on backing up some of my personal data to it, photos, documents etc... I'll be using it via remote desktop mainly so doesn't need to be top spec.
The second server is going to be an additional Cpanel Web Server With the following spec's
Intel Core 2 Quad 6600
4GB DDR II RAM
2X 500GB SATA II HDD'S (RAID)
8 IP Addresses
CentOS
CPanel
3TB on 100Mbps Line
Cost £69.95PM + £120 For RAM, HDD & Raid Card Upgrades
Now when it comes to value for money both servers seem fantastic to me, but what I would like to know is does anyone else use them? what are your experiences with them? whats there support like? etc...
View 14 Replies
View Related
Aug 12, 2008
any dedi server company worth its salt provides a control panel of sorts where you can check bandwidth, raise tickets, etc. Is there anyone who has got a really, really good one that is miles ahead of the rest? I'm wondering what the consensus is on who has the best panel? I want to find the best portal and check it out.
View 12 Replies
View Related