I've a sandbox, when i upload my package, the package disappear.
With aps build package and aps lint package I have no error and no warning, and on the panel when i import the package, simply disappears.
There is a log, a sign, I can not find the error.
I use APS 1.2
since upgrading PPA, I noticed that in the External Applications section, all the APS packages have a column "imported" and "certification" - what these are/mean?
I hit "import" on the wordpress package - but what it is doing and why it would be to our advantage to import an APS package, rather than have them externally hosted so they're always the latest version.
I am trying to install Automation, and I keep getting an error after the "Getting SELinux" step, here is a log of the process so far:
Code:
[INFO]: Checking current user privileges...
[INFO]: Checking critical environment requirements...
[INFO]: Determining OS parameters...
[INFO]: Detected OS: CentOS-5-x86_64
[INFO]: Getting SELinux state...
[ERROR]: Unexpected error: ''
[Code] ....
I have tried running the installation on a different server and the same issue came up...
I am installing plesk automation on centos 6.5 using this command on a fresh system
./ppa_installer --password some_password --admin_email some_email
and get the following error.
[LOGTEE]: Error Downloading Packages:
[LOGTEE]:
[LOGTEE]: libuuid-2.17.2-12.18.el6.i686: failure: Packages/libuuid-2.17.2-12.18.el6.i686.rpm from base: [Errno 256] No more mirrors to try.
Looks like some lib is not found in the mirrors.
On a clean install of CentOS 6.6 (Final) I did the following:
1. updated the /etc/hosts file to point my ip to the hostname
2. Open the ports in the iptables file.
3. ran the ppa_installer per the instructions on [URL] ....
The ppa_installer log says installed Successfully. However the following occurs:
1. Cannot browse to the url:8443, or any of the other variations (8080, 8880, https/http)
2. Yum installer is now broken (I replicated this twice). Yum will not run at all with the following error:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/libcurl.so.4: file too short
Please install a package which provides this module, or verify that the module is installed correctly.It's possible that the above module doesn't match the
current version of Python, which is:
2.6.6 (r266:84292, Jan 22 2014, 09:42:36)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-4)]
I am now going to try Cent OS 6.4.. will report back.
Chrome/Chromium don't offer to "remember this password" if using https with a self signed, or no, certificate, which is pretty frustrating when your job requires regular logins to various Plesk installations!
The trick, apparently, is to import your self signed certificates into Chrome's chrome://settings/certificates list, so I'm trying to do this with Plesk's default panel certificate.
From Tools & Settings -> SSL Certificates, I've hit the 'Download the Panel's SSL Certificate' link to get the .pem file but when I import this into Chrome I'm asked to provide the password it was encrypted with. Where would I find this password? Or do I need to replace the default with my own self-signed?
We have too many DNS servers such as BIND, PowerDNS, NSD on different platform.I need transfer all zones to Plsek server.Is there a ready-made solution import dns zones using axfr?
View 3 Replies View RelatedI've created a website for a client using Sitefinity CMS and MS SQL Server 2008 R2. I've transferred the database from my local SQL server to the production server using SQL Management Studio.
I've created a customer and subscription for hosting the website and it's all up and running perfectly. However, I want to automate the backup of the SQL database for the website which I can only do if the subscription knows about the SQL database for that website. So, how do I associate the two? How do I get the database to show up in plesk for that customer such that it can be part of the scheduled backups - and of course also somethign I could restore via plesk if I had too?
The database exists. It wasn't create via plesk in any way, but I want plesk to be able to back it up, and ideally for it to show up in the customers subscription, etc.
I have a virtual server with CentOS 6.4 (Final) and Plesk 11.5.30 and I would like to increase the database size to import because right now it's only 2MB and I have to put online a website with 10MB.
View 5 Replies View RelatedI expored my databse fom my old hoster and want to import it to my new Windows Server 2012 r2 vps Server but I can't find that option:
I found this link: URL....
my dashboard looks like this, it is missing the Backup Manager: Image: "dashboard.png"
I would like to know if is possible to export Plesk firewall rules from Plesk 9.5.4 to Plesk 11.5.30 with panel.
View 2 Replies View RelatedSince we upgraded to Plesk 11.5 or (I'm not shure) the last Update 12, user can not import MySQL-Databases anymore.
If the user open phpMyAdmin for import and select the database and click on Ok, phpMyAdmin does nothing.
I heard that could be a problem with JQUERY and I checked the files in ParallelsadminhtdocsdomainsdatabasesphpMyAdminjsjquery and all files seems to be there.
Only if I check the source of the phpMyAdmin Import-Website it seems, there is a problem with jquery-1.6.2+fix-9521.js.
But how I can fix this problem for all Windows-Servers.
I'm running Plesk 12. I install it today, using the ISO which parallels provides, which includes centos 6.5 and preinstalled Plesk 12 in my vps. Then I logged in plesk, and I did everything it wants. Then I upgraded my php, to php 5.4.36 according to the manual that Paralells provides, and then I tried to increase the max upload file size for phpmyadmin. I have edited my /usr/local/psa/admin/conf/php.ini file and tried to restart using with 3 different ways using terminal:
1st: service sw-cp-server restart
2st: /etc/init.d/psa stop
/etc/init.d/psa start
3st: reboot (which rebooted all the vps)
My php.ini file is:
short_open_tag = On
y2k_compliance = Off
output_buffering = Off
max_execution_time = 600
max_input_time = 600
memory_limit = 256M
max_file_uploads = 99999
max_input_vars = 2000
[Code] ....
However, when I'm trying to import a 31mb sql file, I always get that error, and only some of my tables are being imported:
#1153 - Got a packet bigger than 'max_allowed_packet' bytes
how can active htaccess files in side my server, every time when i upload any htaccess just disappear from the dir
View 5 Replies View RelatedI upload a .htaccess file in FTP and it disappears, i checked with SHELL file is there but cant see in ftp ,
View 2 Replies View RelatedI've had a page hosted on pagesgarden.com for about 4 years now, they were fairly cheap and the service was decent. Now they seem to have vanished entirely and I'm looking to transfer my domain to another host, but I used pagesgarden as the registrar also so I'm not entirely sure of what I should do to reclaim my domain name.
What is the process for transferring a domain name after the registrar vanishes?
I have a virtual dedicated server with GoDaddy. I don't know to much about managing a server, but have been doing ok for the last 5 months or so (so please make any explainations VERY simple)
I run several pretty heavy traffic sites, and the scripts on the sites send out automatic notifications to the user base that has requested such notifications (new responses, new listings etc..) and in the past few days NONE of those emails are making it through.
The mail just DISAPPEARS! I'm not getting any bounced email, the mail queue manager has only the same spam as not being allowed through, and I have restarted exim, GoDaddy also says that mail IS being sent from the server, they just can't explain why it isn't being delivered, and I'm not going over the max amount I can send daily.
I have NO clue what is going on and ANY help is REALLY appreciated!
Also, the forwarders are still working (mail sent to user@domain.com still gets successfully forwarded to the correct email address)
Trying to access any APS installed in Plesk i obtain this error: Internal error: Package with UID 'fb00f4ad-620a-4052-96b7-398bd99d9d6d' not found.The error panel.log:
[19-Dec-2014 13:17:19 Europe/Berlin] Exception: Package with UID 'fb00f4ad-620a-4052-96b7-398bd99d9d6d' not found.
file: /usr/share/aps_php/aps_php.php
line: 12519
[code]....
This post change the error, but i think that is not the correct way: [URL] ..... Any way to reinstall/regenerate APS database and anything related with it?
Is it possible to enable NLS support in psa-proftpd package?
root@server :]> proftpd -V | grep NLS
- NLS support
Is it possbile for proftpd to support not English filenames ( for example russian, greek etc )?
I am getting Package with UID '9f03febe-57f4-4233-ace8-23f5ce964198' not found error.
I have applied this => [URL] ...
But problem is not solved this time I am getting same error but different UID number.
I define expiration date for my package in my domain and after that date my domain still active. I think this problem related to statistic. When I run this command manullay i'v got the error.
/usr/local/psa/admin/sbin/statistics --calculate-one --domain-name=mydomain.com
And the error
WARNING during statistics_collector execution: : statistics[12391]: Executing logs preparation...
PHP Notice: Zend_Db_Adapter_Pdo_Abstract::closeConnection(): send of 5 bytes failed with errno=32 Broken pipe; File: /usr/local/psa/admin/externals/Zend/Db/Adapter/Pdo/Abstract.php, Line: 166
I was trying to install Plesk on my Windows Server 2012 Standard, but it failed. It says:
" Failed to install 'C:ParallelsInstallerparallelsPANEL-WIN_12.0.18dist-msi-Microsoft-2003-i386plesk-site.msi':"
Error: The installation of the package 'plesk-site' failed with code 1603. (install: installing Parallels Panel WebSite...)
Please contact Support.
I have recently deployed PPA with on nodes with hostnames on the serverroom.net.au domain, so management.serverroom.net.au, mail.serverroom.net.au etc. The DNS is currently hosted on a plesk server which will soon be migrated to PPA.
When I add the serverroom.net.au domain to PPA, I it fails at the sync task with an error saying that there are no A or AAA records for ns1.serverroom.net.au, even when these records exist in the external DNS. The same error occurs when I try to add the domain as a dns entry and switch to internal...
i have installed a Win2008R2 server with IIS and Coldfusion. I want to allow customer to set DSN, i know that older "Plesk Panel" versions that can do but i missing this now in PPA in the customer view. In the subscription is OBDC and Coldfusion connections allowed and unlimited. Must i do anything to activate this ?
View 2 Replies View RelatedWe operate many Plesk VPS servers in a virtual environment for our customers and would really like the ability to allow Plesk VPS servers to switch to using our PPA DNS servers instead of having to have multiple ips on each VPS to run their own name servers. Not to mention the added nuisance of each customer having to register name servers and glue records.
We looked at adding the Plesk servers as nodes to our PPA cluster but the license jump and loss of Nginx is completely prohibitive. Is this possible?
How do I merge two subscriptions - ie, move domainB.com into the subscription of domainA.com?
View 5 Replies View RelatedI try to migrate FTP accounts from our old hosting panel to Plesk CP using plesk API, but I get following error message:
Code: You specified incorrect username.
The problem propably is, that the username (1234_ftpuserexample) stats with digits.
I try to apply my dns template to all dns but it can't work.
I try on the interface and on the command line.
/usr/local/psa/bin/dns --reset [domain_name] -ip [ip]
Is it somehow possible to disable autoresponders for spam mails? Many spam mails are sent under false addresses and will produce MAILER DEAEMON messages if the autoresponder trys to reply to them.
View 4 Replies View RelatedWe currently have Plesk Expand 2.3.2 with 3 Linux servers, 1 Windows server, a SmarterMail server and 2 DNS servers that we are looking to migrate to PPA 11.5. I have the PPA working okay and am trying to test out a migration on just one domain from one of the Linux servers. When I run the preliminary check I keep getting this error:
Error: Mail content transfer from Qmail/Postfix to SmarterMail mail service is not supported.
Assign this subscription to a service template which offers Postfix mail service. We aren't using Qmail or Postfix for user mailboxes in the Expand or PPA systems, only the SmarterMail. I've tried the work around listed here: [URL] .... but that didn't work.
Am I still going to have to assign Postfix to my Service Templates in PPA even if we're not planning on using it for mailboxes?
I have all my client hosting accounts set up to do backups daily but only keep two backups.
There is a problem as PPA is not deleting old backups and simply creates more and more backups until the backup server eventually runs out of space.