I noticed that IETF had not been enabled initially in the DNS template. This has been corrected but we now have numerous domains without that enabled. I would like to enable this on all those domains. Doing so from the GUI would be too time consuming for that number of domains.
So is there a cli switch that will turn this on for all domains or that I can run against all the domains?
I have installed the nginx on my server and want to activate it for all my domains, to do this, i have to do it manually for each domains. But there should be an easier way. Apache uses too much ram.
View 7 Replies View RelatedI restored some some databases outside of Plesk in a MSSQL 2008 instance. Plesk knows about the MSSQL intance but is not aware of the databases. I want to add them to Plesk so they will be backed up.
View 2 Replies View RelatedI've created a website for a client using Sitefinity CMS and MS SQL Server 2008 R2. I've transferred the database from my local SQL server to the production server using SQL Management Studio.
I've created a customer and subscription for hosting the website and it's all up and running perfectly. However, I want to automate the backup of the SQL database for the website which I can only do if the subscription knows about the SQL database for that website. So, how do I associate the two? How do I get the database to show up in plesk for that customer such that it can be part of the scheduled backups - and of course also somethign I could restore via plesk if I had too?
The database exists. It wasn't create via plesk in any way, but I want plesk to be able to back it up, and ideally for it to show up in the customers subscription, etc.
Plesk Windows 12, MailEnable mailserver
I added users directly to mailenable (using their migration utility to import from an old mail server which plesk does not support). The domains exist in plesk but not the individual email users/mailboxes.
Now I want to add those email users to plesk but it doesn't let (not surprisingly), when I try to add a user it returns an error: "Unable to update the mail account properties:mailmng failed: MEAOPO.Mailbox.AddMailbox failed"
My question is: How can I add the users that already exist in MailEnable to the plesk configuration? (i.e. ignore the error and add the user to the plesk database, or even better yet if plesk can read the configuration and add all users)
Tthe plesk kb articles suggest running mchk.exe but that is designed to take users from plesk and add them to mailenable, I need the reverse).
I added a new SSL certificate in `Plesk -> Tools & Settings -> SSL Certificates` and now want to link an existing domain to it.
However, on domain SSL Certificates page, the only option displayed is to create a new certificate. I can't select one of the existing ones.
Am I missing something? How can I link already added SSL to a domain?
Plesk12 on IIS8.5/Windows2012r2.
For a migrated site, how can I associate an existing DB with a subscription? The only option I see is to add a new database and this is not a new database?
How to enable self add ssl certificate for end users as on linux hosting?
View 4 Replies View Relatedhow to enable AWStats for the domains on my server. In our old Panel (v9.5), I could go Domains > DOMAIN.TLD > Web Hosting Settings, and on that page there was an option to choose between Webalizer/AWStats/None. In version 11.5, I don't see that option.
When I look on the actual Windows server, I do see an AWStats directory along with a Webalizer directory in "C:Program Files (x86)ParallelsPleskAdditional", so I think it's installed...? AWStats comes along as part of the Plesk Panel license, right?
I can see the Webalizer stats when I browse to [URL] ...., but I'd much rather see AWStats.
I've enabled the DomainKeys-Signature in my server.Now I want to enable DKIM, how?
==========================================================
Summary of Results
==========================================================
SPF check: pass
DomainKeys check: pass
DKIM check: neutral
Sender-ID check: pass
SpamAssassin check: ham
I want to enable SSL in one of my domains. I've checked old topics about how to do this, but I can't get it done.
I want to use a self-signed certificate. I'm gonna use the SSL to receive and send data from/to an Android device, not to access it using a web browser.
I created my own certificate in SSL certificates (I used the self-signed option instead of Request). I didn't add anything else after that, I didn't add Certificate or anything else.
Once it's been created, I enable SSL on the domain I want. I just enabled the checkbox, there's no combobox to select a certain certificate, but I changed the default certificate on SSL certificates. I thought that was enough, but it wasn't working so I went to IP Addresses, I clicked in my dedicated IP (shared) and selected my new certificate in there, but it's still not working.
EDIT:
I've just seen that Apache Tomcat might not be installed, I'm not sure if that has anything to do with it. If I go to Server->Service Management I can find Apache Tomcat 5.4.4 in the Java tab (it's the only Apache entrance), but it says it's not active since it hasn't been installed or it's not correctly configurated. If I go to Applications->Installed applications Apache Tomcat is not there.
how to enable bzip2 compression in phpmyadmin.
View 5 Replies View RelatedWe are trying to use a configure settings for an external SMTP server within Plesk (Windows 2008 R2 Plesk 12) but are receiving the following error message:
Error: Unable to encode IDN email address 'username': email address is invalid
We are trying to use a username for SMTP authentication as we do not have the option of using an email address with our current SMTP relay provider.
Is there any way around this so that we can use a username rather than an email address?
When trying to migrate from one 12.0.18 Update #26 to another, I got always the same error:
Details
Error:
Unable to download dump files to local store.
Error:
The network path was not found
I've installed the Plesk Panel onto a windows 2008 server. It's all good, web sites are flowing and I'm really happy with the software. The issue I'm having is a customer has an asp site with an access database. After I uploaded their site, they couldn't write to the database, so I had to manually go and set the permission on the database for the "Plesk IIS Anonymous Account (IUSR_xxx)" user to have modify access on the file.
So my question is this, how can I set up the default hosting account to already allow this and so I don't have to go an waste time tweaking the folders manually trying to find the right permissions?
Also, why is it the Plesk IIS Anonymous account that needed to have it's permissions tweaked and not the "Default Plesk application pool user (IWAM_plesk(default))" which is the user who's configured on the application pool in IIS? I can't see where the Plesk IIS Anon user is being used.
Any user that logs in, even with the format domainusername, get's the following error message: 530 User cannot log in.I have already tried the following:
net stop MSFTPSvc
net start MSFTPSvc
I'm trying to rename a domain in my panel and keep getting the following error:
Code:
Error: Execute websrvmng --rename-vhost "--old-name=domainb.com" "--new-name=domaina.com" failed with error code 1: External component has thrown an exception. In IIS7NativeProvider module Exception type: System.Runtime.InteropServices.SEHException at _CxxThrowException(Void* , _s__ThrowInfo* ) at IIS7ApplicationPools.copy(IIS7ApplicationPools* , auto_ptr<IApplicationPool>* , basic_string<wchar_t,std::char_traits<wchar_t>,std::allocator<wchar_t> >* srcName, basic_string<wchar_t,std::char_traits<wchar_t>,std::allocator<wchar_t> >* dstName)
Running
Code:
websrvmng --rename-vhost "--old-name=domainb.com" "--new-name=domaina.com"
In the Windows command line gives the following error:
Code:
Cannot find domain by name 'domaina.com'
Haven't found many leads on the web as to what this might be.
I need to create more than a 1000 domains and i'm hoping to do this using an automated process. I can create them individually through the command line interface on our windows server but this will take a lot of time and effort.
View 1 Replies View RelatedI have a dedicated server here in the UK with fasthosts (win 2008 server, IIS 7), which which has been running fine for nearly a year. it was running plesk 9.2, and then out of the blue it got errors creating a new domain saying that PHP wasn't installed.
PHP was/is installed on the server, and is still running fine within my 12+ domains/websites. at the point of the error it was running 5.3.8 - i had manually upgraded the version outside of Plesk, but it had seen the new version when installing new domains.
When Plesk stopped seeing that PHP was installed, my hosts asked me to upgrade Plesk, as it would solve the issue. I used that ai.exe program, and choose v11.
The control panel installed OK - but I did lose my websites for a while, due to it downgrading my PHP to v5.2, and installing an older MySQL version which tried to use the same ports etc (I also have manually installed mysql v5.5 and have 1gig databases in that installation!).
After chosing the upgrade to 5.3 option in the Plesk control panel, and turning the Plesk installed Mysql v5.1 service off and to disabled in windows services - 'revealing' my 5.5 version, I could at least get my websites up and running once again!
Once all those were running (the priority), I have found that v11 Plesk has the same problem as v9.2, namely that it doesn't think that PHP is installed and available.
The error on installing a new domain;
Error: Failed domain creation: Unable to update domain data: Execute websrvmng --add-domain "--domain-name=testkrispy.co.uk" failed with error code 1: PHP 5 is not installed
Oddly it does see PHP 5.3.15 in the Service components screen, and it's ticked 'green' in that page, so all looks well.
On trying to install a new domain using plesk I get this;
And also on pages such as webmail - it also shows 'PHP not installed' against those webmail clients which would need PHP to run.
Any way to 'force' Plesk to see that the PHP 5.3.15 version that it itself installed (and I've removed the component and re-installed using Plesk).
My list on the server components page;
ASP 7.0.6002.18276
ASP.NET 2.0.50727.4016
FastCGI Support 7.0.6002.22343
Perl v5.10.1 built for MSWin32-x86-multi-thread
PHP 5.3.15
Python 2.6.5.12
SSI 7.0.6001.18000
I've tried something found on this forum (under the 10.4 area), but that hasn't fixed it;
"C:ParallelsInstallerparallelsPANEL-WIN_11.0.9dist-msi-Microsoft-2003-i386php53.msi" you will have an option for "repair" - ran that, no difference.
So as it stands, Plesk 11 is running, and most functions work, it just doesn't recognise the PHP install that it put in place... so I can't add software which requires PHP through Plesk, nor add new domains. All existing domains are running and using PHP fine - so it's installed OK.
One error I've noticed on startup - within the PHP error log, is the following - which I'm guessing is coming from the Plesk's own PHP executable (I can see it uses a 5.3.10 version in it's own admin area, with an extended php.ini file? ) I'm guessing the plesk's php.ini extension is trying to double load some dlls (which isn't a problem?) but seems to not find the php_sockets.dll - although that file is in the directory specified!? If it's a php dll around network sockets, maybe it is trying to use those to communicate with a running php instance? (Just guessing here?)
[30-Jul-2012 15:56:42 UTC] PHP Warning: Module 'mbstring' already loaded in Unknown on line 0
[30-Jul-2012 15:56:43 UTC] PHP Warning: Module 'mysql' already loaded in Unknown on line 0
[30-Jul-2012 15:56:43 UTC] PHP Warning: Module 'mysqli' already loaded in Unknown on line 0
[30-Jul-2012 15:56:44 UTC] PHP Warning: Module 'pdo_mysql' already loaded in Unknown on line 0
[30-Jul-2012 15:56:44 UTC] PHP Warning: Module 'pdo_sqlite' already loaded in Unknown on line 0
[30-Jul-2012 15:56:44 UTC] PHP Warning: PHP Startup: Unable to load dynamic library 'C:pleskAdditionalPleskPHP53extphp_sockets.dll' - The specified procedure could not be found. in Unknown on line 0
I got this error without any kind of explanation and I cannot identified where is the problem:
Error: Call to a member function getIpAddresses() on a non-object (PleskDataManager.php:1280)
I need to get a list of suspend domains from mysql. The domains are suspend because they exceeded quota.So far I have done this query:
#############
select domains.id,
domains.name as domena,
Round(((sum(domains.real_size))/1048576),2) realMB,
(select Round((limits.value/1048576),2) from limits left join (domains, subscriptions, subscriptionproperties) on (domains.id=subscriptions.object_id and subscriptions.id=subscriptionproperties.subscription_id and subscriptionproperties.value=limits.id) where subscriptionproperties.name='limitsId' and limits.limit_name='disk_space' and domains.name=domena) quotaMB
from domains
where domains.status='2' and
(select (sum(domains.real_size)))>0
group by domains.cl_id;
but I didnt managed to get only those that exceed the quota.
I need move "Manual Move" all the email content from different domains.
For example i have the domain:
xxx3.com
with the emails:
info@xxx3.com
sales@xxx3.com
network@xxx3.com
I like know how i can move the email content from every email from one Panel to another Panel without the Transfer Manager. Because the account is created on the other server with different configurations, but i need backup only the old email.
I migrate to 12.0.18 Actualización #28, última actualización Dic 11, 2014 02:12 PM.
When I try to Access to the domains in a specific client I´m geting this error:
Internal error: D:Plesk wes.escarmerieradomenech.com is out of webspace
MessageD:Plesk wes.escarmerieradomenech.com is out of webspace
File Webspace.php
Line401
TypePleskFatalException
After upgrading the panel from 10.4.4 to 11.5.30 Update #23, I am not able to sort domains based on the "Renewal Date" column. With 10.4.4, I was able to sort. Is there anyway I can do this on 11.5.30?
View 7 Replies View RelatedWe have the Windows version of Plesk 11.5 installed. I've removed the "Management of access to the server over Remote Desktop" but two of my sites (there's only 4 so far) still have the remote desktop button available if you log into the user account and switch to those two domains. Switching to the other two doesn't display the icon. I'm not sure if there's another place where it gets turned on/off as I've tested creating a new subscription with the "Management of access to the server over Remote Desktop" ticked and it's not giving me the desktop icon there.
View 1 Replies View Relatedhow to make backups separately of all domains and clients, without going into their panel and configuring one by one?
View 2 Replies View RelatedI have somewhere at 2000 domains.
I need to change path to vhost from W:host to D:vhost
I copied all files from W to D drive and created symbollinks. Now all files stored in D:vhost and symbollincs pointing to W:vhost.
If I will use reconfigurator, will it recopy existing files or just will skip them? Because I have millions files in my vhost dir
Also i thought about change drive letter in windows OS. It wil be enough to just stop IIS service and plesk services for switching disk letter?
Can i just some how say plesk that he should search all vhost files in D:vhost? With out process of copying files,becouse thay already exist there are.
I have a server with Plesk Panel 11.
When I create a domain, I created the folder:
c: inetpub vhosts.
I need to change the folder, since in that hard drive partition I'm running out of space.
How I can change the location of the folder where Plesk creates domains?
So after the palaver yesterday, I managed to remove everything to a degree enough to reinstall Plesk. I'm still having quite a few issues but at least the websites are up and running again.
One of the more important ones is SSL certificates. Apparently they still exist somewhere, but they're not showing up in Plesk.
I tried doing /usr/local/psa/bin/certificate -l -domain <domain>, however that returns:
PHP Notice: Undefined index: CSR; File: /usr/local/psa/admin/plib/api-common/cuCertificate.php, Line: 878
Error occured while sending feedback. HTTP code returned: 502
PHP Notice: Undefined index: Priv; File: /usr/local/psa/admin/plib/api-common/cuCertificate.php, Line: 878
[Code] .....
How I can change the "Resource type for web hosting" for an existing subscription?
I've been created a subscription with no web hosting, but now I need to activate web hosting on that subscription.
Since about a week, we've been having trouble creating new domains in an existing subscription, we always get this error message:
Error: mailmng-outgoing failed: ERRORutgoing:domains.subscription_id may not be NULL
We tried the suggested fix in the KB [URL] .... but we get this output:
# /usr/local/psa/admin/sbin/mchk
==> Checking for: mailsrv_conf_init... ok
==> Checking for: mail_handlers_init... ok
==> Checking for: mailsrv_entities_dump... ok
==> Checking for: mail_admin_aliases... ok
==> Checking for: mail_auth_dump... ok
==> Checking for: mailman_lists_dump... ok
[Code] .....