If I put in site some file with 10MB ( example ) the data statistic don't refresh to new space allocated...
Disk space stay in actual size, how to enable auto-refresh on statistics like traffic and quota space?
Mail Statistic not working, In /var/log/maillog contains below logs:The limit on the number of allowed outgoing messages was exceeded. Try again later.
But on Home
>
Tools & Settings
>
Outgoing Mail Control
Attempts to send mail per hour (except the current hour):
Statistics are being calculated.Count statistic not working, it not show any infomation abount mail attempt sending. !When i check ./mailserver -i options
POP3 authorization: off
SMTP authorization: on
Maximum letter size: 20971520
Relaying: auth
Check the passwords in the dictionary: on
Enable MAPS spam protection: off
MAPS zones: b.barracudacentral.org;zen.spamhaus.org
Short POP3/IMAP mail account names: off
The maximum number of connections (IMAP, POP3, IMAP over SSL, or POP3 over SSL).: 1024
[code]....
Show the alert on the Home page about attempts to exceed limits based on statistics for the last: P1DSend a notification about attempts to exceed limits on outgoing mail every: PT15M
I'm suffer 2 major problem as below :
1.
how to turn off spamassassin completely ?
I've already stop the spamassassin service on Services Management but it's only valid one day. The next day, spam assassin service automatically start
2.
my customer mailbox statistic wrong. Even if their mailbox not full but when they send email. The quota said that their mailbox full. So they can't send/receive email.
Our action :
Manually, use command
/usr/local/psa/bin/sw-engine-pleskrun /usr/local/psa/admin/plib/DailyMaintainance/script.php -f execute-statistics
i'm using plesk 11.5..i've deleted a huge file of 15Go and i've still a message about free space on ther server...MySQL query failed: Got error 28 from storage engineClick to expand...
View 2 Replies View RelatedWe have Plesk installed with a dedicated disk on /opt. System disk is about 20 GB, data disk is about 220 Gb.There is 190 Gb free on the data disk (mounted on /opt).
But when we try to increase allocated space for a domain, Plesk says that there's enough disk space..Is there any change or adjustement on Plesk we can do, so Plesk will check space on the good disk ?
I have a customer on a 250MB hosting plan and has been using approximately 450MB for the past few days but hasn't received a resource overuse email.
In my notifications I have "Resource usage limits exceeded by subscription" set to send myself and the customer an email but neither of us have received anything.
I changed the DUMP_TEMP_D directory in psa.conf.
I have set it on /var/backups and given the permission 1777.
I have rebooted the psa service and initialized the backup again but it always returns that error.
Moreover, if I run the command df -h, the tmp directory doesn't appear.
I have Plesk 12 on Centos6.I require a list of every subscription which has consumed the most data on the server. Disk space used by the following files and directories in the subscription:
Websites
Mail accounts
Databases
Logs
Backups
Chroot directories
Configuration files
Anonymous FTP directory
The Plesk bible only listed that this was possible through Subscriptions > Statistics. URL....However viewing the Subscriptions > Statistics is not an option because there are many subscriptions..I also have access to SSH/terminal and found a script for finding large file and directories here URL....However i rather have it in excel or HMTL format.
Whenever I am trying to take backup through Parallels Plesk (Plesk version:12.0.18 Update #53) getting an error "Error: Insufficient disk space for backup. "
Default backup location is '/var/lib/psa/dumps' with enough space (Near 1TB). Then why showing above error message?
Version Details:
Version Parallels Plesk v12.0.18_build1200140811.16 os_CentOS 7
OS CentOS Linux 7.1.1503 (Core)
[Code]....
How do i know the amount of ram allocated to me?
How will i know if my account is allocated with the ram i bought.
How will i know if my host is over selling?
My sites are going down frequently, I have to restart apache to get them back.I checked the cpu and memory usage logs on whm, and they are well with in limits.
But my hosting support fellow is saying other wise.
Quote:
Our logs indicate that from time to time your VPS is going above the RAM Guarantee, this puts your services in danger of going offline until the RAM usage is back under the guarantee. If you continue to see these problems, we recommend either reducing the RAM usage by disabling any unused services, purchasing a guaranteed RAM upgrade, or upgrading to the next plan, to help alleviate the problem.
How much local disk space is necessary for a full backup of 240 GB data to a remote ftp?
I have 314 GB free on my local disk, but this is still not enough.
The backup process is 100% after round about 4 hours, according to Backup Manager.
But there are still tar processes until the disk is full.
I have a python script that generates images and is able to write them into a directory on the same web space
However, I would like the same script to write files into another directory located in the web space of another domain on the same server.
For example, script lives here...
/var/www/vhosts/domain1.com/httpdocs/scripts/myscript.py
this works...
/var/www/vhosts/domain1.com/httpdocs/scripts/images/
this fails...
/var/www/vhosts/domain2.com/httpdocs/web/images/
The directory structure already exists, so there is no need to create any new directories
I have tried setting permissions for the destination "images" directory to 777 and that didn't work.
Do I need to specify something within Plesk to enable it to write to another directory?
It appears that my clients disk space usage calculation is including admin full server FTP backups that I am doing.
This shouldn't be the case, these full server backups that I'm doing should not count towards my clients plans disk space allowance.
We had many backups stored on our Plesk 12 server about 51 GB in total.
After reducing the backups back to 10 GB by removing old backups through the Backup Manager.
The issue is that Health Monitor still reported that there was low diskspace displayed by color yellow. And it look Health Monitor over 16 minutes to change the alarm level from Yellow to Green
However the statistics at the specific subscription still present the Backup usage of 51 GB's whilest they are no longer there.
What can i do about this in order to speed up the synchronization?
I migrated from one server running Plesk 10.4.4 Update #59 to a new server running Plesk 11 which I then updated to 12.0.18 Update #32. Since moving to Plesk 12 the "Notify when disk space/traffic usage reaches" emails have been being sent to our customers set up on the server whereas previously they were sent to the server admin email address.
Is this a change with this version?
looking for some ball parks on how much 1000sqft of data center space would be - looking at about 30kVA for the power. location is Upstate, NY; PA vicinities.
View 9 Replies View RelatedI'm wondering what kind of prices you would be looking at for some private data center space, maybe in the InfoMart or one of Internaps data centers - somewhere in Texas though, preferably Dallas. Is there any kind of rough monthly price I should expect? Maybe a standard per sq ft charge?
Also, if you rent a private "suite" does that include office space, or would that still be needed separately? How much would it be to get a small (100 to 500 sq ft) office in the infomart?
Cabinet Suite (Internap only it seems), and private suites would be considered. Possibly a cage or private rack, but not preferred.
I deleted my databases unconsciously in Parallels Plesk 12 for CentOS.I want to restore all data because it's more important for my activities.Is it possible to restore or others possibilities for my problem ?
View 8 Replies View RelatedNot all the data was backed up into /var/lib/psa/dumps/domains/xyz.com/databases/xyz successfully.
Use of chdir('') or chdir(undef) as chdir() is deprecated at /usr/local/psa/PMM/agents/shared/Storage/Bundle.pm line 39.
mysqldump: Couldn't execute 'show table status like 'xyz'': Can't read dir of './xyz/' (errno: 24) (1018)
I have Plesk 12 on Ubuntu. In an earlier version of Plesk I have some domains and all was fine. Now on a new server I have a problem: I cannot access to the domains via ftp. I have have user and I can connect to the server with a ftp client. But after (successful) login I did not receive any data and can not do anything.
View 3 Replies View RelatedI can not delete only a Domain and replace it with a other Domain. There is just the possibility to delete the Domain incl. the data. The Problem is i have 2 Domains that point to the same root-directory. And now i was making a new website in a other directory. And now i want to use one of this domain for my new website. But i can't change it. Also if i change the document root, the website d'ont use the new domainname - it makes like a redirection to the old domainname.
View 3 Replies View RelatedBuy the new Dedicated Server Self-Managed Dedicated Servers - Self-Managed - Intel Xeon E3-1240v2 Quad Core But i don;t have cpanel installed in my server i had now Managed VPS Server with whm panel had only 1 site [URL] .... don't have too much data i m facing server issue problem they request me to buy dedicate server i buy self manage server it cost me less but now i search on google alternative whm i find parallels but i m new here don;t know how to install and transfer it WHM tO Paralllels plesk panel
View 4 Replies View RelatedI just took a server at a hosting service where I already have several Plesk servers running. The servers I already have running are equipped with 2 conventional disks in RAID1
This new server is equipped with a 2 x 2 TB and a 128 GB SSD disk. With a setup wizard you can install Plesk which comes with licenses.
This new server has a bit different partition model where /var is mounted on the SSD and there's a /data that's mounted on the 2 TB RAID. This /data will then not be used for Plesk.
I can think of many scenarios to change this, but I don't want to find out in the near future that back-ups aren't working because I'm using a symlink somewhere (just an example). The increased speed of the SSD is of course good for the databases, so maybe it's better not to move everything to that partition.
I'm thinking of creating mount points instead of /var/www , /var/qmail and /var/lib/psa
Copy its content to /data/var/www , /data/var/qmail and /data/var/lib/psa
Then modify /etc/fstab so these will point to the appropriate folder
I think it's more robust and transparent instead of using symlinks.
And what are the folders I chose to move?
Apache didn't want to start due to a permission problem.. I think I solved it by making SELINUX permissive
grep SELINUX= /etc/selinux/config
Code:
# SELINUX= can take one of these three values:
#SELINUX=enforcing
SELINUX=permissive
[Code].....
i have installed today Reverse Proxy Nginx on Plesk 12. After have activing Nginx, website show "no data received".
Nginx error.log:
PHP: no "ssl_certificate" is defined in server listening on SSL port while SSL handshaking-----conflicting server name
I have the last update (#6) but i have this message when i try to make a backup.
Error:
Runtime error: The check dump failed with code '1'. The dump can contain invalid data! at /opt/psa/admin/bin/plesk_agent_manager line 1022.
Error:
The dump have been invalidated by check-dump operation
What is this?