I changed the DUMP_TEMP_D directory in psa.conf.
I have set it on /var/backups and given the permission 1777.
I have rebooted the psa service and initialized the backup again but it always returns that error.
Moreover, if I run the command df -h, the tmp directory doesn't appear.
Whenever I am trying to take backup through Parallels Plesk (Plesk version:12.0.18 Update #53) getting an error "Error: Insufficient disk space for backup. "
Default backup location is '/var/lib/psa/dumps' with enough space (Near 1TB). Then why showing above error message?
Version Details:
Version Parallels Plesk v12.0.18_build1200140811.16 os_CentOS 7
OS CentOS Linux 7.1.1503 (Core)
[Code]....
How much local disk space is necessary for a full backup of 240 GB data to a remote ftp?
I have 314 GB free on my local disk, but this is still not enough.
The backup process is 100% after round about 4 hours, according to Backup Manager.
But there are still tar processes until the disk is full.
It appears that my clients disk space usage calculation is including admin full server FTP backups that I am doing.
This shouldn't be the case, these full server backups that I'm doing should not count towards my clients plans disk space allowance.
When restoring a backup on Plesk 12, the error below is generated for some sites and the sites are only partially restored. Although the message talks about disk space, there is in fact plenty of free disk space - i.e. many GB. The backup was created on Plesk 11.5. The restore on Plesk 11.5 works.
I noticed that all the failed domains exceed the disk space allowed by their Service Plan. However, the 'Overuse is allowed' setting is selected. Strangely, I tried changing the Service Plan and retrying the backup and restore, and the same errors were generated.
<object type="domain" name="domain.com">
<object type="hosting" name="domain.com">
<message code="CantUnpackDomainContent" severity="warning" id="f3946c79-7ae2-4be2-8300-ba766bea7869">
<description>Can not deploy content of domain domain.com</description>
[Code] .....
We have Plesk installed with a dedicated disk on /opt. System disk is about 20 GB, data disk is about 220 Gb.There is 190 Gb free on the data disk (mounted on /opt).
But when we try to increase allocated space for a domain, Plesk says that there's enough disk space..Is there any change or adjustement on Plesk we can do, so Plesk will check space on the good disk ?
I have a customer on a 250MB hosting plan and has been using approximately 450MB for the past few days but hasn't received a resource overuse email.
In my notifications I have "Resource usage limits exceeded by subscription" set to send myself and the customer an email but neither of us have received anything.
I have Plesk 12 on Centos6.I require a list of every subscription which has consumed the most data on the server. Disk space used by the following files and directories in the subscription:
Websites
Mail accounts
Databases
Logs
Backups
Chroot directories
Configuration files
Anonymous FTP directory
The Plesk bible only listed that this was possible through Subscriptions > Statistics. URL....However viewing the Subscriptions > Statistics is not an option because there are many subscriptions..I also have access to SSH/terminal and found a script for finding large file and directories here URL....However i rather have it in excel or HMTL format.
I migrated from one server running Plesk 10.4.4 Update #59 to a new server running Plesk 11 which I then updated to 12.0.18 Update #32. Since moving to Plesk 12 the "Notify when disk space/traffic usage reaches" emails have been being sent to our customers set up on the server whereas previously they were sent to the server admin email address.
Is this a change with this version?
I have a plesk
[root@srv tmp]# cat /usr/local/psa/version
10.3.1 CentOS 5 1013110726.09
I have following problem:
When i do full backup and download this backup, plesk create a temporary file inside directory /usr/local/psa/tmp but after download finish this file is not deleted, and this is causing problem because i have a server with small disk space.
i have a 32 GB hdd the results of df command are:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 32G 29G 715M 98% /
/dev/sda1 99M 14M 81M 15% /boot
tmpfs 1.5G 0 1.5G 0% /dev/shm
so there are 29GB used
but the du command shows only 19GB used:
du -hs /
19G /
where are the remaining 10GB from 19GB to 29GB?
I am runing ubuntu server 64bit with plesk v.11.5.30, phpmyadmin v.4:3.4.10.1-1.
When i try to acces phpmyadmin from : myserverIP/phpmyadmin - it gives me 500 error.
When I try to acces phpmyadmin from: mydomainserver/phpmyadmin - it saves file at login into the disk instead login. I was going through different threads on the web to solve that problem but no success at all.
I have real basic knowledge about webservers, phpmyadmin and mysql server. I am runing my first cloud server just few days.
There is no possibility to access preconfigured phpmyadmin from plesk according that thread: link So what for do I need plesk?
Does anyone know why Disk Space needs to be entered in both 'Clients' & 'Domains' in Plesk? I don't understand how that works... If I set up a client template and make this 250MB Disk Space, and then set up a new Client using this template... Next I attach them to my Domain template where I have given them unlimited Disk Space... What will they have 250MB or Unlimited?
View 6 Replies View RelatedI'm on PPA 11.5 MU#2 (Should upgrade to MU#3 soon). My problem is that the Usage of Disk Space for all my customers subscriptions are not calculated. I've run the daily maintenance script (which it actually runs periodically), but there's no update on the display.
View 3 Replies View RelatedI upgraded Plesk 11.5 to the latest version 12.0.08 # 5 and now I can not configure the external FTP backup I get the error:Transport error: unable to list directory: Curl error: Timeout was reached. Also failing the backup shows this error: Unable to rotate dump: The dump rotation is failed with code '126 'at / opt / psa / admin / bin / plesk_agent_manager line 1041.
And this one:Can not upload file 'domains/domain.tld/backup_domain.tld_info_1406210716.xml' to ftp. Error code: 1..my SO Debian 6.0.8
i have make a full Plesk Backup on my Old Server with Plesk 12.0(Ubuntu) and will restore the Backup on my new Server with Plesk 12.0(CentOS).When i will restore the backup i get this error: "Error: The source file is not a valid XML file. If you supplied an archive file containing a backup from Plesk version 9 or later, then extract the contents of this archive, and process the extracted XML file with the converter. If you want to convert a backup file from a Plesk version earlier than 9, then you first need to process it with the pre9-backup-convert utility, and then process the resulting file with the pre10-backup-convert utility."
In the Logs i found this:
deployer.log - [URL] ...
import.log - [URL] ...
pmmcli.log - [URL] ...
I recently started getting errors when attempting to backup our web server.
Code:
Warning: mysql "db_xxx_0"
Failed to pack files webxx-fullbackup_db_xxx_0_1_1406050308 in /mnt/backup/location [ 412107659264 bytes free of 541129271296 bytes total on mount point 0]
Warning: mysql "db_xxx_0"
Use of chdir('') or chdir(undef) as chdir() is deprecated at /opt/psa/PMM/agents/shared/Storage/Bundle.pm line 38.
mysqldump: Error 2013: Lost connection to MySQL server during query when dumping table `wp_postmeta` at row: 1357
My server has a small SAS disk(about 73G), if I use 90% diskspace of it, is it good idea, will it harm the physical HDD?
View 6 Replies View RelatedSometimes I get this error:
Domain: mydomain.com
Plesk entry point: https://myserver.local:8443/
Following error is occurred during scheduled backup process:
[Errno 17] File exists: '/usr/local/psa/PMM/logs/backup-2014-06-18-23-30-05-556'
but in the backup.log and in the pmmcli.log I don't found any error.
What does it mean?
Can't restore.
plesk Internal error: Failed to exec pmm-ras: (array ( 'code' => 127, 'stdout' => 'Transport error: File '_info_1503031904.xml' not found ', 'stderr' => '', )).
in debug mode:
Internal error: Failed to exec pmm-ras: [2015-03-05 16:19:49.215|23284] INFO: pmm-ras started :
/usr/local/psa/admin/bin/pmm-ras --get-dump-info --dump-file-specification=_info_1503031904.xml
--session-path=/var/log/plesk/PMM/logs --debug [2015-03-05 16:19:49.215|23284]
INFO: Repository '/var/lib/psa/dumps': Initializing...
[Code] .....
I'm recieving the following error
"Transport error: unable to list directory: Curl error: Couldn't connect to server".
This happens when I enter ftp settings for the Personal FTP Repository. I'm sure the ftp server is fine. I have it already set on other domains. It connects backs-up just fine.
I've noticed two things when connecting to the FTP server it automatically issues PASV and does nothing else. It also connects using the secondary ip which I guessing it should. Micro Update 5 is installed.
When accessing a backup in backup-manager in a user subscription via a reverse proxy (eg. plesk panel is called as localhost:8443) I get following error:
Internal error: Failed to exec pmm-ras: (array ( 'code' => 127, 'stdout' => 'Transport error: File 'clients' not found ', 'stderr' => '', )).
Message Failed to exec pmm-ras: (array ( 'code' => 127, 'stdout' => 'Transport error: File 'clients' not found ', 'stderr' => '', )).
File Connector.php
Line 227
Type PleskPMMResponseException
This happens when I try to download the backup and also when clicking on the backup name. These are the apache settings for the reverseproxy domain:
SSLProxyEngine On
AllowEncodedSlashes On
<Location />
ProxyPass https://localhost:8443/
ProxyPassReverse https://localhost:8443/
</Location>
I cant restore my back up. Get following warnings:
Warning:
php_version 5.3 is not supported. It will be replaced with php_version 5.4 for the following service plans: Unlimited, Admin Simple, Default Domain, Default Simple, Web Presence Builder, SiteBuilder
Warning:
python is not supported. It will be disabled for the following objects: Service plan 'Unlimited', Service plan 'Admin Simple', Service plan 'Default Domain', Service plan 'Default Simple'
Warning:
The component fail2ban is not installed. It will be disabled for the following objects: Server settings
Warning:
php_version 5.3 is not supported. It will be replaced with php_version 5.4 for the following websites: swen.flugzeugbilder.orgClick to expand...
I am having trouble with backing up a wordpress multisite.. When backup is on i am getting this error:
Not all the data was backed up into /var/lib/psa/dumps/domains/<domain>/databases/<db_name> successfully. mysqldump: Got error: 1016: Can't open file: './<db_name>/<some_table>.frm' (errno: 24) when using LOCK TABLES
Ii got the following error during automatic Backup:
Unable to rotate dump: The dump rotation is failed with code '1' at /opt/psa/admin/bin/plesk_agent_manager line 1041.
I used Plesk Version 12.0.18. The Backup is created, but i following this error Message.
On our Centos 6.5 Vps with Plesk 12.0.18 the scheduled backup to a personal repository ftp fails every time with this error:
ERROR: () Unable to rotate dump: The dump rotation is failed with code '126' at /usr/local/psa/admin/bin/plesk_agent_manager line 1041.
ERROR: () Can't upload file 'clients/vorrei-cloud/domains/vorrei.org/backup_vorrei.org_info_1412130307.xml' to ftp. Error code: 1
On the target server there are nothing.
why but autoupdate fails. It doesn't give a reason why it cant backup.
For line of log :
START pp11.5.30-bootstrapper-11.5.30-cos5.build115131216.11 installing AT Thu Mar 27 07:43:37 CET 2014
Last lines of log :
===> Upgrading database
Trying to start service mysqld... mysqld (pid 24610) is running...
done
Trying to establish test connection... connected
done
Trying to find psa database... version is 011005030
Version is OK, no need to create psa database.
Trying to backup MySQL database...
ERROR while trying to backup MySQL database
Check the error reason(see log file: /tmp/plesk_11.5.30_installation.log), fix and try again
Trying to start psa...
**** Product prep-install for BASE failed.
***** problem report *****
ERROR while trying to backup MySQL database
Check the error reason(see log file: /tmp/plesk_11.5.30_installation.log), fix and try again
STOP Bootstrapper 11.5.30 prep-install for BASE AT Tue Jun 17 04:04:48 CEST 2014