Migrating accounts to a fresh Plesk 12 installation task fails with the following error: Perhaps /usr/local/psa/admin/bin/deployer application missing, has incorrect permissions or unexpectedly terminated
Fresh install of Plesk 12.0.18 MU42 on CentOS 7.1. Tried to reinstall, same problem.
already tried this:
[URL] ...
...without success
We have a problem migrating from 11.0.9 to a different server running 12.0.18. Our Plesk 11 server is running great since years ago. We have 3 resellers there, say reseller1 with 17 domains, reseller2 with 13 domains and reseller3 with 250 domains.
First, we executed a complete server migration with:
/usr/local/psa/bin/migrate -m -host xxx.xxx.xxx.xxx -password xxxxxx -ip-mapping /root/migration-mapping.txt -skip-license -replace-existing-objects true
The process ran properly, but in the end we've found reseller1 and reseller2 were NOT migrated. No errors were reported tho.
While investigating this issue we have found:
1) "/usr/local/psa/bin/migrate --list-resellers" returns only reseller3. So it looks like reseller1 and reseller2 are not "seen" by the migrate utility.
2) /usr/local/psa/bin/migrate -mr reseller1 returns:
Migration started at: 2015-06-03 04:21:11
The following clients not exist: reseller1
3) /usr/local/psa/bin/migrate --list-subscriptions returns the 250 subscriptions of reseller3, but no single mention to reseller1 and reseller2 subscriptions.
In short, reseller1 and reseller2 are invisible for the migration utility. Both missing resellers are ok, enabled and active in our Plesk 11 server.
We are now stuck on the migration process and wondering if this could be a bug in the migrate utility? or some inconsistence in our Plesk 11?
If a Plesk admin wants to install Wordpress, the installation always fails.
1. Select Server Management -> Tools & Settings -> Security -> Security Policy
2. Select (*) Very strong
3. Confirm with OK
4. Select Hosting Services -> Domains
2. Select Domain
3. Select Button Install Apps
4. Select Wordpress in All Available Applications
5. Select Install
6. Error message is shown!
Error: Installation of WordPress at http://lyl-canbys.de/blog failed. Your password is not complex enough. According to the server policy, the minimal password strength is Very strong. To improve the password strength, use numbers, upper and lower-case characters, and special characters like !,@,#,$,%,^,&,*,?,_,~
But the password was complex enough. with 20 numbers+charcters+special chars!
I i lower Plesks Security Policy to (*) Strong, the Wordpress installation works. But lowering Security with password length 8 is not desireable.
Plesk 12.0.18 Update #24
Linux Debian 7.7
I think this is a bug in Plesk.
I want to migrate a Plesk 9 tot a Plesk 11.5 server. The new server runs CentOs 6.5, but everyone talks about a checkbox with Rsync option and I also see this at pictures at the internet. But in my Plesk panel this option is missing.
where my Rsync checkbox is?
We're trying to migrate a Webspace from a 11.5 to a 12.0.18 Plesk host using the Migration Manager. The Webspace contains 4 domains. The main domain of the webspace gets migrated fine, however, all of the "child" domains fail with the following error:
Execution of /usr/local/psa/admin/plib/api-cli/domain.php --create webspace-domain.ch -webspace-name child-domain.ch -do-not-apply-skeleton -notify false -guid 733c0e02-4b75-4f73-8421-03b23051d65d -creation-date 2013-06-06 -skip-plan -ignore-nonexistent-options failed with return code 1.
Stderr is
Wrong syntax for command's '-webspace-name' parameter. 'webspace-domain.ch' does not match the pattern '/^[[:alnum:]]([[:alnum:]-]{0,61}[[:alnum:]]){0,1}(.[[:alnum:]]([[:alnum:]-]{0,61}[[:alnum:]]){0,1})+$/iu'.
When I try to migrate from old server to new server, I get this error:
Warning: Deployer has been terminated by exception: Line 471 error: Element 'certificates': This element is not expected. Expected is one of ( sb-config, backup-settings, server-preferences, spamassassin, grey-listing, virusfilter, kav-settings, coldfusion, gapps-services, events ).
Trying to migrate from Hsphere to PPA but failing with the following errors
[2014-04-29 20:14:02] [INFO] | START: fetch info from source servers
[2014-04-29 20:14:02] [INFO] fetch-source| Fetch H-sphere servers information.
[2014-04-29 20:14:32] [ERROR] | ABORT (by exception): fetch info from source servers
[2014-04-29 20:14:32] [ERROR] | Exception:
Traceback (most recent call last):
[Code] .....
whenever one of my customers tries to install an application from the application installer, they get an error that looks like this.
Error: Installation of WordPress at http://*******.com/wordpress failed. Non-zero exit status returned by script. Output stream: 'PHP Warning: mysql_connect(): Access denied for user 'ndari_wordpres_7'@'aeris.jdrepo.com' (using password: YES) in /opt/psa/var/apspackages/apscatalogSTqEEM.zip7b3ca133-9714-5d/cache/scripts/db-util.php on line 66 '.
Error stream: 'PHP Warning: mysql_connect(): Access denied for user 'ndari_wordpres_7'@'aeris.jdrepo.com' (using password: YES) in /opt/psa/var/apspackages/apscatalogSTqEEM.zip7b3ca133-9714-5d/cache/scripts/db-util.php on line 66 '.Click to expand...
i developed a socket application to recive data from port.this application recvng data from a unit through port no 4444(Vehicle Tracking unit). this application recvng data and evrything is ok....but some times no anydata is coming in to this application.for eg:if application recves data 2 days after that 2 days it will recve one or two data only....again after 2 days it will recve all data correcly....that means lot of missing data we have....my question is whether this missing data is bse of my socket application or unit?
The manufacturing company telling us unit is sending the data continuiously..but some times this socket application is not recvng data in 2 days interval....i dont know how to solve this issue....is any other setting is required in server to recve data continuously....
i think socket application 100% is ok...unit maufactures telling unit also sending data continuously...then where the problem is???can anybdy share ur idea about this?
I setup PHP support to Run as FastCGi Application, and i setup the memory_limit=32M in DOMAIN/etc/php.ini, then i create a php program with ini_set('memory_limit','128M'), it does not according to my settings are limited. How can i limit it , only just use the disable_function = 'ini_set' ? or Was there other methods ? Because, When PHP runs as apache module , i can use the php_admin_value in vhost.conf to limit what i want , it does not limit everything like this (disable_function).
View 3 Replies View RelatedI have:
Debian 7.5
Plesk 12.0.18
In the hosting setting i have selected:
PHP support (Run PHP as FastCGI application , PHP version 5.4.4)
The web instead of interpreted php makes me do the download of a file. How can I fix?
When i open the page i get the error: "502 Bad Gateway"with strace i get the following error:
Code:
connect(14, {sa_family=AF_FILE, path="/var/run/mysqld/mysqld.sock"}, 110) = 0
setsockopt(14, SOL_IP, IP_TOS, [8], 4) = -1 EOPNOTSUPP (Operation not supported)
setsockopt(14, SOL_SOCKET, SO_KEEPALIVE, [1], 4) = 0
System: Debian 7.5
Mysql: 5.6.19
Plesk: 12.0.18
When I try to install Magento 1.9.1.1 I get the error message;Error: Installation of magento at http://mydomain.com/ failed. Non-zero exit status returned by script.Can't seem to get any more information into what might be causing this issue...
View 2 Replies View RelatedI have this issue if I try to open Control Panel-Tools and Settings-Application Vault and also if I click on Wordpress Toolkit.
I have tried to find the lib with this command:
find / ( -name libmysqlserver.so.2 -o -name libmyodbc.so ) -print 2>/dev/null
with this output:
/usr/lib64/sw/libmysqlserver.so.2
/usr/share/cagefs-skeleton/usr/lib64/sw/libmysqlserver.so.2
I think that the path is incorrect because I have red that it was be /usr/lib64/ and no /usr/lib64/sw/
I have red this link: [URL] ... but the path is /usr/lib64/ and also I have reinstall mysql-connector-odbc but with no success.
After my HDD crashed, I replaced it and installed Plesk 12.0.18 but not some options are missing from the panel.I'm missing this functionality: Send from domain IP addresses and use domain names in SMTP greeting
Also now after the restoration of the backups in /var/www/vhosts/<DOMAIIN_NAME>/logs/There are no logs, but they are present in /var/www/ vhosts/ system/<DOMAIIN_NAME>/logs/Before they were symlinked to the first directory.all my domains with a dedicated IP are being sent from my main IP, and they are being marked as spam because of SPF.
After restore (without any errors) some of my files are missing from one particular domain. The files are present in the backup however, they just don't restore. In this case it is a Wordpress installation and the complete wp-content folder did not restore one one of the domains.
View 1 Replies View RelatedI am using apt-cron for automatic nightly security updates.
This morning, it won't install anything - here the log:
Code:
Jan 6 04:21:00 srv2 cron-apt: CRON-APT RUN [/etc/cron-apt/config]: Tue Jan 6 04:00:01 CET 2015
Jan 6 04:21:00 srv2 cron-apt: CRON-APT SLEEP: 1052, Tue Jan 6 04:17:33 CET 2015
Jan 6 04:21:00 srv2 cron-apt: CRON-APT ACTION: 3-download
Jan 6 04:21:00 srv2 cron-apt: CRON-APT LINE: /usr/bin/apt-get -o quiet=1 upgrade -d -y -o APT::Get::Show-Upgraded=true
[Code].....
I want to Reinstall Watchdog(RKHunter), but i don`t find Watchdog in Extensions.
Is it no longer available ?
Plesk Applications Installer. I wish to create my own WordPress template (with preinstalled plugins/themes) for my customers.
Is there an easy way to do this (or anyway to do this)?
The APSC database was corrupted, so i used :
/usr/local/psa/bootstrapper/pp11.5.30-bootstrapper/bootstrapper.sh repair
to repair the databases. Worked, but give me the error
"Table 'aps_resource' doesn't exist"
One more time, i recover this table from the newest backup existing. But now, give the error " Can not find registry resource for Application ID" for one domain - I have 3 domains, 2 are working, one not.
Since upgrading to Plesk 12, I'm getting near daily "Application Updates" emails. The body copy simply reads "date.timezone = Europe/London"
How do I stop these? They're very annoying and clients receive them too.
Parallels Panel 11.0.9
Ubuntu 12.04.4 LTS
Apache/2.2.22 / Mysql 3.5.8.1
Is it possible to let Plesk allow database creation from another web application ?
For example, we would like to use this framework (codeigniter) method => this->dbforge->create_database('db_name')
ACTUAL RESULT =>
The method returns false but i'm unable to track it on the error logs.
EXPECTED RESULT =>
The method should returns TRUE
And thus the database should be created
Is it some task we should manage at Plesk or Apache level ?
I'm missing files that the existing crontab requires. There are results on Google for it, but since the parallels' forum upgrade, all the Google links are dead...
The missing crons in question are:
/bin/sh: /usr/local/psa/libexec/modules/watchdog/cp/clean-events: No such file or directory
/bin/sh: /usr/local/psa/libexec/modules/watchdog/cp/pack-sysstats: No such file or directory
/bin/sh: /usr/local/psa/libexec/modules/watchdog/cp/clean-sysstats: No such file or directoryClick to expand...
I'm trying to make use of the multiple PHP versions in Plesk 12, however the newer versions are missing some packages my websites require.
When yum installing them it just tries to install to the default PHP5.3 version so says it is already installed.
As I didn't compile these php versions how can I install additional PHP packages to the supplied additional versions in Plesk?
I have updated from 11.5 to 12.0 mostly in order to use Fail2Ban.
I have also installed a new Plesk 12 license key to make sure that the license allows Fail2Ban. It says now that Fail2Ban is "On". But I can not find the menu entry to get to the Fail2Ban configuration. It is simply not there... (it is supposed to be in the Securitiy menu in the Tools and Settings section...)
I've been happily copy databases between subscriptions in Plesk 11.5xx for years but having updated to 12 the feature no longer works.
In the copy database screen when the 'local MySQL server' option is selected in the drop down the 'Copy to existing database' radio button is disabled.
My service provider tells me this is a feature change.
After a migration I did this weekend I mis a couple of the migrated domains in the subscription list. The domains are working great, but I cannot find them in Plesk.
I got this errors in the migration manager:
Info:
The password was generated for user 'Domain Administrator (domain.com)'. New password is 'GA66QgQ'
Warning:
Execution of /opt/psa/admin/plib/api-cli/user.php --create domain.com -owner admin -guid cfa43606-e8b0-444c-a005-660984840498 -cname Domain Administrator (domain.com) -passwd '' -status disabled -domain-admin true -email '' -external-email true -role Domain Administrator (domain.com) -country NL -legacy-user false -subscription-name domain.com -ignore-nonexistent-options failed with return code 1.
Stderr is
Error during user creation: Owner with id 1 has not subscription with id 69
Warning: domain "domain.com"
Execution of /opt/psa/admin/bin/backup_restore_helper --restore-legacy-dlu domain.com -dlu-info /opt/psa/PMM/tmp/deployer_legacy_dluIrjcWa -ignore-nonexistent-options failed with return code 1.
Stderr is
Unable to create Account object: Account: unable to select: no such row in the tableClick to expand...
I just upgraded from Plesk 11.x to 12.0.18 and was eager to try the new sieve functions. I used the normal Plesk Updates/Upgrades tool to change the imap server from Courier to Dovecot. However, Dovecot will not start. It gives an error about /etc/dovecot/private/ssl-cert-and-key.pem missing.
View 2 Replies View RelatedI think the samba add on for Plesk 12 is not correctly implemented for CentOS 7.To get smb users added I first had to manually install the samba-client, since smbpasswd was missing:
Code:
yum install samba-client Next I had to manually run
Code:
chcon -R -t samba_share_t /var/www/vhosts/my-server.tld/ for each share to be able to access it...
I have installed the Wordpress application. The wordpress url is "server.com/wordpress", but I want to change it to something like "server.com/myblog".
In Plesk, the installation path cannot be changed (at least, it is not under "Change Settings").
Changing the Wordpress installation itself is not that difficult (renaming the folder in httpdocs and changing the siteurl and home parameter in the database), however, in Plesk still the old installation path is shown, and the Plesk interface to Wordpress obviously does not work any more.
How can I change the Wordpress installation path in Plesk?
Version Parallels Plesk v12.0.18_build1200140606.15 os_Ubuntu 12.04
OS Ubuntu 12.04.5 LTS