Plesk 12.x / Linux :: Listening On Two IP Addresses
Dec 3, 2014
I need to listen to two IP addresses supporting many domains.
It the pass we achieve this on the Data Centre firewall. This option is no longer available.
Traffic is been presented to Plesk 12.0.18 on
Eth0 – 192.168.0.2
Eth1 – 192.168.0.12
I set up 192.168.0.2 – all is working well
I installed NGINX – all is well and the websites are running faster.
Normally I would try to listen on two IP address in Apache. This option I could not get working as Plesk creates the Apache configuration files from the information entered through the panels. This in turn over rights any manual changes to the Apache configuration files.
I understand that I could use NGINX to achieve this. Is this correct how is it achieved?
View 1 Replies
ADVERTISEMENT
Feb 8, 2015
What is apsc? I found an apsc.conf (in /etc/sw-cp-server/conf.d) the file contains the line "listen 6308 ssl;". So far that explains why sw-cp-server is listening on that particular tcp port.
Which service is provided by apsc? Can I change it to listen only to 127.0.0.1? I like my server to have a minimum of open ports to the public.
View 5 Replies
View Related
Dec 10, 2014
How can I remove a few "server { }" blocks from the file "/etc/nginx/plesk.conf.d/server.conf" without them being readded by plesk?
I want to stop nginx from listening on port 80/443 for a specific IP which is listed there.
Very much like described here: [URL] ....
But with nginx running in front of apache...
My setup looks like this:
* Plesk 12 + Ubuntu 14.04
* IP-Pair1 (IPv4_1 + IPv6_1)
* IP-Pair2 (IPv4_2 + IPv6_2)
IP-Pair1 is supposed to host admin and customer access.
= Plesk-admin-interface (lighhttpd?) on 80/443 instead of 8443 (ssh on 22, ftp ...)
IP-Pair2 is supposed to host visitor access.
= Plesk webspaces (nginx/apache) on 80/443
So I want to stop nginx from grabbing ports 80/443 of IP-Pair1 and listen to IP-Pair2 addresses only. Then I want to set plesk-admin interface to listen to 80/443 on IP-Pair1 only.
View 2 Replies
View Related
Sep 16, 2014
I built the system on Centos 6.5 with plesk 12 with a range of ips. I then (after the fact) copied the IPs of the old server to the new and moved all the domains to their IP's. This way today we flipped the routes and all should work.
The problem is that the domains only work when putting :7080 behind them. It seems like the httpd is only listening on the old IP and not the new ones. How to make plesk/httpd listen with the new IP's on port 80"
httpd.conf
#Listen 12.34.56.78:80
Listen 7080
I added all the other IP's and tried changing ports under Listen but that does not work either. So changing the listening port does not work.
View 4 Replies
View Related
Dec 1, 2014
I have a Problem with my VHosts on one of two IP addresses. One IP is dedicated and works well
The other IP is shared. Since two days every call to one of the websites of this share ip goes to the Plesk Default Website. I tried to reconfigure single sites and all sites (/usr/local/psa/admin/bin/httpdmng --reconfigure-all), nothing works and restarting apache shows some warnings.
apache2ctl -S shows the following lines:
Code:
[Mon Dec 01 19:56:08 2014] [warn] VirtualHost 85.214.41.141:7080 overlaps with VirtualHost 85.214.41.141:7080, the first has precedence, perhaps you need a NameVirtualHost directive
[Mon Dec 01 19:56:08 2014] [warn] VirtualHost 85.214.41.141:7081 overlaps with VirtualHost 85.214.41.141:7081, the first has precedence, perhaps you need a NameVirtualHost directive
[Code] ....
In an other thread I found a possible solution for the overlapping vhosts. The problem there seems to be a missing ssl-certificate and that matches with the situation on my server. After copying any other certificate-file as the one with the missing filename the apache starts without any warnings, but after that all websites (the sites from the dedicated ip too) only shows the apache default site ("it works"). I Tried to reconfigure single sites and all sites (/usr/local/psa/admin/bin/httpdmng --reconfigure-all), nothing works.
The server is hosted by STRATO, so there are daily backups. I turned back one week (the problem exists since two days). Then for some hours all works fine but suddenly all the sites on the ip 85.214.41.141 get broken again and shows only plesks default page.
View 1 Replies
View Related
Aug 18, 2014
We want to send a newsletter email for all the company employees, we are using doppler because of a location and language thing (based in Argentina where an important part of the company operation is located), so when we are ready to send the newsletter it says that all recipients are bouncing, asked to droppler support and they say the problem comes from plesk, because it needs to have their ip addresses into the whitelist.
So, went to plesk, selected the domain where the bounced email addresses are (dlbgroup.com) but from there I don't know where to go, I don't want to do something wrong or delete something accidentally, so where to upload this CSV file to the right whitelist place.
View 6 Replies
View Related
Jun 12, 2015
I have installed a new SSL cert and tried to assign it to an IP address.
Plesk says "Information: The properties of the IP address .... were changed."
But it seems the SSL cert was not changed.
Running in mysql the following query
select d.name from domains d inner join hosting h on h.dom_id = d.id where h.certificate_id = <id of new cert>;
gives:
Empty set (0.00 sec)
I changed the cert for the IP where all my domains are so it should show the domains using that IP/cert. Running the query using the ID of the old cert lists all the domains on that IP/cert.
View 1 Replies
View Related
Jun 17, 2015
get this problem on a completely new installed machine Ubuntu 14.04. I want to migrate and i come only to that point after Checks -
Home>Tools & Settings>Migration & Transfer Manager>
Define IP Addresses Mapping:
Next button is unavailable and i get the message "No free IP addresses of this type available".I tried to upload a new txt file with old and new IP address, but i doesn't get a feedback. So what I can do now?
View 2 Replies
View Related
Jul 24, 2014
If i select this option in Server-Wide Mail Settings, server still sends email trough main IP address.
View 2 Replies
View Related
Jun 16, 2014
I am running a VPS through 123-REG, Plesk version 11.0.9 with CentOS 6.4
I host 3 websites of my own (with 14 mail accounts)
4 websites for clients (with 10 mail accounts)
7 websites for clients (with 0 mail accounts)
The problem I have had in the last 2 weeks is that the server has been compromised once again by spammers.
2 weeks ago we had another instance and the support was even worse than before, I decided that the best way forward after irradicating the problem and correcting the source, and in the interest of each of my clients I decided to asign each client with their own IP address in the vain hope that if one client account is compromised the others will not be affected, 123-REG agreed that this is a solid solution so I purchased 5 additional IP addresses for the clients I host mail accounts for, (all of the said addresses were blacklisted when I was given them!!!) the reverse DNS was not set up correctly, and couldn't be through their control panel and some didn't match the SMTP banners, then I found out through them that the mail was still sent out through the Primary IP address anyway so if one client gets blacklisted they all still do.
Now they tell me that I can in fact configure Plesk to use each IP address for each client exclusively and they sent me a link to a support article that doesn't actually tell me how to do it.
I can do the following so far:
Log into puTTY and use the command: nano /etc/postfix/master.cf
Find the "smtp" record referenced in the article [URL]
1.1.1.1- unix - n n - - smtp -o smtp_bind_address=1.1.1.1 -o smtp_bind_address6= -o smtp_address_preference=ipv4
2.2.2.2- unix - n n - - smtp -o smtp_bind_address=2.2.2.2 -o smtp_bind_address6= -o smtp_address_preference=ipv4
although mine looks like the one below:
1.1.1.1- unix - n n - - smtp -o smtp_bind_address=1.1.1.1 -o smtp_b$
Is there something missing from the entry I have?
Assuming that 1.1.1.1 = the relevant IP Address for the client do I need to create an entry for each of my IP addresses?
Do I need to do anything with SMTP banners? If so how do I do it, and what do I need to do?
The article also mentions the default settings being restored each time you reconfigure mail settings and to consider a scheduled task, does that mean each time I set up a new mail account or a new client as I assume that I will need to repeat these steps in that case anyway, mainly because they will have a unique IP address that needs to be set up.
View 1 Replies
View Related
Jan 14, 2015
I am using latest version of PP12 and do not have the "Send from domain IP addresses." seeing showing in the Mail Settings page.
There is nothing shown between "Enable message submission" and the "Relay Options".
Yes, I am using Postfix.
What am I missing?
View 7 Replies
View Related
Sep 3, 2014
I m trying to get the feature "Outgoing Mail from Exclusive IP Addresses" working, as with an updated Postfix configuration the menu entry for this functions does not appear anymore.
Maybe i am missing something in my configuration that tells Plesk to not show it anymore.
Plesk 12 - fresh installation on Debian Wheezy.
We only changed main.cfnd here is the configuration file (please note that the formatting was a bit corrupted by the plesk panel ):
Code:
alias_database= hash:/etc/aliases
alias_maps= hash:/etc/aliases, hash:/var/spool/postfix/plesk/aliases
append_dot_mydomain= no
biff= no
disable_vrfy_command = yes
header_checks= regexp:/etc/postfix/header_checks
mailbox_size_limit= 0
[Code] ....
View 4 Replies
View Related
Nov 11, 2014
I have two sites that register a high amount to SMTP traffic. Both sited have only forwarding email addresses.
Do forwarding addresses accumulate SMTP traffic on the log?
Also, if a forwarding email is created without a mailbox is it necessary to add a password so that "others" cannot use the blank SMTP server to send email out?
View 2 Replies
View Related
Jun 2, 2014
I have just added some extra IP addresses to my plesk panel from 1&1
CentOS 5.6 (Final)
Panel version11.5.30 Update #45
I have changed a couple of domains to have their own IP address - one marked as shared, the other as dedicated.
I can not log in to either via FTP since changing to a new IP address, the DNS has been changed to reflect this change over and resolves correctly.
I have used the domain name, original IP address and new IP address as the host address with filezilla on windows and mac, and smart ftp on windows.
All accept the username and password, but then all of them timeout with ETIMEOUT error.
Existing domains on the original IP address log in fine via FTP.
View 2 Replies
View Related
Jul 9, 2014
The IP addresses assigned to our servers have changed so it's time to update the default SPF information contained in the DNS records for ALL of the domains hosted on our servers:
OLD
Code:
v=spf1 +ip4:173.236.23.185 +ip4:173.236.23.188/30 +a +mx -all
NEW
Code:
v=spf1 +ip4:69.160.255.188/30 +ip4:69.160.255.192 +a +mx -all
However, when we update the resource record in the DNS template and then "Apply the changes to all zones...",
Panel will apply changes from the template to all DNS zones including the customized ones. Note that user-modified records always remain intact. For example, if the template contains a new record that was already added by a customer, Panel will keep the customer's record.Click to expand...
View 1 Replies
View Related
Jul 11, 2014
Upon checking the mail logs, I find this
Code:
Jul 12 07:39:35 ns2 postfix/smtp[31739]: certificate verification failed for gmail-smtp-in.l.google.com[173.194.68.26]:25: untrusted issuer /C=US/O=Equifax/OU=Equifax Secure Certificate Authority
Jul 12 07:39:36 ns2 postfix/smtp[31739]: 2AC1222A0003: to=<aarontd207@gmail.com>, relay=gmail-smtp-in.l.google.com[173.194.68.26]:25, delay=2, delays=0.1/0/1.3/0.64, dsn=2.0.0, status=sent (250 2.0.0 OK 1405143576 q6si6606624qan.104 - gsmtp)
View 1 Replies
View Related
Sep 19, 2014
Seems everythings is working normal when ignoring following error message, but everytime I add or change mail settings for a domain, I am getting this error:
Internal error.
ERROR:
Uncaught exception 'Zend_Log_Exception' with message '"/var/log/plesk/panel.log"
cannot be opened with mode "a"' in /usr/local/psa/admin/externals/Zend/Log/Writer/Stream.php:81
Stack trace: #0 /usr/local/psa/admin/plib/Plesk/Log.php(69): Zend_Log_Writer_Stream->__construct
[Code] .....
View 6 Replies
View Related
Jun 2, 2008
I seem to have a strange problem (I am hoping that if I fix this, it will fix another problem I am having).
For some reason (I most probably did by accident) when I run the command lsof -i tcp:80. The information that comes up says that my IP address xx.xxx.xxx.172 is being used to listen to port 80. Yet the IP address that was asignned to me is xx.xxx.xxx.171. I am wondering how I would go about removing wrong IP address so that the right one is listening to the correct port.
I am running centos OS.
View 4 Replies
View Related
Nov 14, 2012
I'm running Apache 2.2 on Windows 7. I'm a casual user of the Apache server, and the server I'm running is only used to develop a Silverlight application on the local machine, nothing more. The following problem is apparently a non-systematic error (sometimes the server can startup, sometimes it cannot. If it cannot, it sometimes can after a reboot (a service startup race condition?))
I get error when starting the server: "The requested operation has failed!"
When I run "http.exe" from a command prompt I get:
Quote:
httpd.exe: Could not reliably determine the server's fully qualified domain name, using 10.0.0.100 for ServerName
(OS 10048)Only one usage of each socket address (protocol/network address/port) is normally permitted. :
make_sock: could not bind to address 0.0.0.0:80
No listening sockets available, shutting down
Unable to open logs
It does not write anything in the "error.log". It cannot? why? rights? but it could yesterday! anything changed from yesterday, no nothing!
I have tried to start the server many times today, and it has not written anything in error.log. Looking in the log there are many entries from yesterday, when the server probably worked!?
Okay there most be something using port 80 then!
Output from "netstat -o -n -a | findstr :80" is nothing! netstat says there is nothing listening on port 80.
I'm running SQL Server 2008 Express, and "Reporting Service" would be a prime candidate for listening on port 80, but netstat says it is not!
I'm using the ZoneAlarm firewall (the Apache server has been given full trust and permissions), and it has worked previously, I belive it cannot be the problem.
I'm using Avast anti-virus, but everything is disabled in it, and I'm only using it to run a virus check from time to time.
(I don't think it has anything to do with the "fully qualified domain name", because the setting it is complaining about has always been the same, also when the server is actually working, from time to time)
View 2 Replies
View Related
Oct 29, 2014
I am setting up apache 2.4 as a service locally through localhost on a windows 2008 R2 standard server. I have set up SSL listening on port 443 and works correctly, however I am having trouble figuring out how to get apache to authenticate my CAC card.
I have downloaded the DOD certs and put them into various types of files including pem, base 64, der etc and I have yet to figure out a way to get the client certificates validated.
I have left out the information about the SSLCertificateChainFile, SSLCACertificateFile and SSLCARevocationPath as I am sure this must be where my problem is.
Is it possible to get this done through localhost. Here is the error I am getting in the error log.
[Wed Oct 29 11:37:05.675491 2014] [ssl:error] [pid xxxx:tid xxx] [client 127.0.0.1:59282] AH02039: Certificate Verification: Error (20): unable to get local issuer certificate
I am using a self created self signed server ceritficate. Here are some details from my httpd-ssl.conf file:
Code:
<VirtualHost _default_:443>
DocumentRoot "${SRVROOT}/htdocs"
ServerName localhost:443
ServerAdmin admin@example.com
ErrorLog "${SRVROOT}/logs/jtdi.log"
TransferLog "${SRVROOT}/logs/jtdi-Transfer.log"
[Code] ....
View 1 Replies
View Related
Jun 3, 2008
how to configure linux so that it allows for two ip addresses on one machine?
I know this is possible because my server administrator setup one of my servers to have two different ip addresses so that I could have a static and dynamic http daemon (two different daemons but listening on different ips).
What do you need to configure?
View 1 Replies
View Related
Jul 23, 2014
After upgrading from 11.5.30 to 12.0.18, when make backup see next message:
<?xml version="1.0" encoding="utf-8"?>
<execution-result status="error">
<object name="example.com" type="domain">
<message severity="error" id="167b9714-3e33-4863-861d-69c4f559afe6" code="InformationalException">
<description>Unable to dump IP addresses for mail service</description>
[Code] ....
View 6 Replies
View Related
Jul 5, 2008
i install cpanel on my server
i have problem with dns ( ping)
i restart named and take this message: ....
View 5 Replies
View Related
Jun 20, 2014
I am trying to install Magento on my apache server. I am running into the dreaded mcrypt issue as Magento needs it to run. I have now been googling for the past few hours and have gotten nowhere.
Here are my details:
Linux
Centos 5.5
PHP 5.3.3
x86_64
Plesk 12
I have tried installing all sorts of different repos and it just isn't working.
When I try to install using # yum install php-mcrypt I get the following:
Loaded plugins: fastestmirror
Package php-mysql is obsoleted by php-mysqlnd, trying to install php-mysqlnd-5.5.13-3.el5.remi.x86_64 instead
--> Processing Dependency: php53-gd for package: psa-php53-configurator
--> Processing Dependency: php53-imap for package: psa-php53-configurator
[Code].....
View 6 Replies
View Related
Feb 25, 2015
Does Parallels support Plesk 12 being installed on a Linux VM that is provisioned on Microsoft Windows Server 2012 R2 Hyper-V?Is it fully supported?
View 2 Replies
View Related
Nov 17, 2008
Best platform for IMAP mail (Cpanel, Plesk Linux or Plesk Windows)
I need to setup 5 email accounts on my domain, each will use IMAP and store messages on server, so total space taken by each account will be 2-5 GB.
I have decided to go with eurovps.com as I'm close to them and ping is fast.
What is the best solution for IMAP and large email accounts: Linux Cpanel, Linux Plesk or Windows Plesk?
Each account will be accessed by 2 people differently by Thunderbird and occasionally by webmail, so nice webmail is a plus.
View 7 Replies
View Related
Nov 3, 2008
I have a server running Linux and PLESK, and am interested in switching to Windows and PLESK. Will the backups made under Linux restore under Windows?
View 1 Replies
View Related
Jan 25, 2008
Basically, considering my host is in Europe/Malaysia, it uses APNIC for their RR, and for more IPs its $5.00 per ip/month. Which is a bit expensive for me, so I was wondering if there are people on here that sell IPs for cheap? It doesn't matter what country it comes up in with a whois lookup, or what RIR it uses, I just need more IPs for my dedicated server.
So does anyone sell? Or know where I can buy?
View 6 Replies
View Related
May 2, 2008
Our business has grown and we would like to know if it is possible to buy IPs (/18 or /19)
Anyone have any experience with this?
View 14 Replies
View Related
May 8, 2008
There's a gadget showing how quickly we are running out of IP4 addresses.
View 11 Replies
View Related
Apr 25, 2007
As iam going to rent a server for my hosting plan I need to know 2 things:
1) are the ip addresses provided to me by the comany public or they are private inside the comany and they use natting to reach it as I don't know how they treat all the servers in thier DCs?If I check my server configuration I will find the real public ip's?
2) How they put the servers together?I mean is there any logical division like VLANs or what?
If someone can help me on this as Iam going to rent my first server and I will manage it by myself.
View 2 Replies
View Related
