I have run a server for some time with no troubles. All of a sudden the server will not allow outlook, outlook express, eudora etc to send emails. I can connect and receieve emails fine, but sending is another matter. I get a connection timed out message when I attempt to connect and send emails.
Sending email via Horde Webmail works 100% fine, it only seems to be when you send from a client side email app.
what might be causing this, or where to start looking? My experience with Linux is very, very limited.
I have WHM with centos and I have a customer who needs to send large attachments of 25 or 30 mb, he uses webmail. So the question is... how do i increase the load time?...
since i believe that is not a problem of data capacity... maybe his connection is too slow, and therefore he cant send large data.
And also how do i increase load time for the customers who use outlook aswell?
I am using CPanel,I have thousands of messages and it takes time to access them via webmail; I have moved all inbox mails to Outlook but I am looking for a solution to upload my sent messages to Outlook so that I 'll never have to use webmail.
A few days ago Outlook Express refused to continue sending emails using my hosted account. It has been working fine for over three years now. I changed the software and used Thunderbird but it failed two. They just say that the mail server took much time and I should check the SMTP server. I even tried that from several computers and several connections. The response from the host is too slow (dislike their usual).
I have just install on a new server plesk 12.0.18 Update #7 on centos 6.5 final.Added new hosting for the domain on a dedicated IP. All works fine (website, incoming mails etc) apart from outgoing mails.Both webmail (roundcube) and other mail software (outlook 2010, 2013 , android phone etc) outgoing mail i can't get to work.
I have attached screen from webmail with SMTP error (250) : Authentication failed..With Outlook it will allow me to set up account, test account setting... it say all all complete if i don't set secure connection (SSL)/requires authentication. But when you try sending mails you get the error: Your message did not reach some or all of the intended recipients.
Subject:test Sent:16/07/2014 15:13
The following recipient(s) cannot be reached:
'x@xxx.com' on 16/07/2014 15:13 Server error: '554 5.7.1 <x@xxx.com>: Relay access denied'
When you set the outgoing requires authentication/ advance SSL you get:Send test e-mail message: None of the authentication methods supported by this client are supported by your server.I have tried changing to some outgoing ports to no avail.
There is a strange problem with picking up and sending emails on Outlook 2007 which I have wasted hours on over the last week.
Whenever I try to pick up/send emails on domain names, I get a 800CCC0F error message. It says: "reported error (0x800CCC0F): 'The connection to the server was interrupted. If the problem continues, contact your server adminstrator or Internet Service Provider (ISP)'"
I have gone through all the steps here [url]and here [url]and on another websites.
I have been setting up email addresses on Outlook for several years, so know how they should be done.
The strange thing is the email addresses of domain names hosted elsewhere work perfectly. But both new and existing Clook-hosted email addresses are producing this error message.
I believe it may be an error with the software for two reasons:
1. The email addresses work perfectly when I open Outlook in Safe Mode.
2. Our web host's staff have not been able to find anything wrong and the email addresses work when they try to set them up on their computers.
Any idea why our email addresses may not be working and how I can fix this please?
I have tried System Restore and Repairing the program on my computer's Control Panel.
a client get the following error message when he tries to send an attach of 13 mb with horde
Quote:
Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 36859419 bytes) in /usr/local/cpanel/3rdparty/lib/php/Net/SMTP.php on line 836
and as far as i know: 36859419 < 134217728, so i dont know why it shows that error.
btw the memory limit in the php.ini is of 48 mb (quite a lot) so i dont know where else i have to look.
I migrated a client from a Windows server to Linux and everything is fine except that mail sent to this client (say, example1.com) from a particular domain (say, example2.com) simply disappears and does not reach at all. Mail sent to that other domain (example2.com) from my new client (example1.com) is delivered correctly.
Incidentally, that other domain (example2.com) from which the mail is sent is with the hosting provider who was earlier providing services for my newly acquired client. Should I suspect anything? Or, is there a way to figure out what's happening?
I have MailScanner running on my VPS, but it isn't configured to filter at RBL level, only at Exim level, so I don't think this is the issue.
Hi when configuring MS Outlook with an IMAP account it works perfectly, however when you send email it only ever goes into the default personal files sent folder, is there anyway to get sent items from each imap account to go into their own imap sent folder?
Ever since I had a OS reload, all the mail in Horde will show up as "read" after I use Outlook to fetch them. (Exaim is installed, Outlook is using POP3 to connect) Even mail that have never been opened in Outlook will show up as "read". Before this, the mail in Horde was never synchronized with Outlook. For example, if I read a piece of mail, it won't show up as read in Horde. Instead, it'll show up as "unread" until I read it using Horde. Now, it the mail in Horde seems to be synchronized with Outlook though Outlok keeps a copy on server even after deleting it locally (on the PC).
I don't want that to happen because my other co-admin uses Horde and I use Outlook.
It'll mess up the read/unread settings for each. I never changed any settings in Outlook so it must be some config on the server. Anyone have a clue where to change this setting so this behavior doesn't occur?
I am having a user that is having issues with their IMAP accounts and Outlook timing them out. I have had them set the timeout in Outlook to the maximum of 10 minutes and it is still showing up occassionally. I have a dedicated server that is running Exim 4.2. I was hoping someone here had an idea on how I can either fix this on the Server side or the client side.
I've found today that my outlook can't download email messages from server. I thought it was a mail server but the messages are there when I look through webmail.
For 48 hours I didn't receive any email in outlook and I was alerted today by my customers since they don't receive anything too. The strange thing is that outlook runs normally. It doesn't display any error: just doesn't download any messages from inbox. I have my customers complaining BAD service (about 80 customers on that VPS). It was working and now it isn't...
I opened a support ticket to my provider (jaguarpc.com) but they are taking toooooo long to solve it and their answers are ineffective - I think they are not giving the correct attention to this issue. As you know, email issues are big since online businesses rely on them.
I have another VPS with jaguarpc and pop3 is working fine...
If someone could give me a hint about this issue maybe I could solve it through cpanel or give that info to support.
By the way, IMAP works fine. Just POP3 doesn't work.
I'm trying to send an e-mail from my imap server to an aol e-mail address, when i attempt to send the e-mail it doesn't send it to the aol e-mail address. Is there a specific port number i should set on my out look under my smtp settings?
im sure this has probably been asked before but i cant fidn it, does anyone know how to do the MS Outlook autoconfiguartion scritps for pop email accounts liek what cPanel does as im ceating an email service on my site but its all done manually (joys of php and shell_exec) so id love to be able to code my own autoconfig script for users aswell
i am aware of the LVL 1 and 2 configuration files and they are configured right.
My problem at the momment is the follow:
When i am on the local network and try to download and attachment or save it to the HD i am able to do it.
When i am on an external connection and try to do the same i am not able to do it and a message telling me that the attachment is blocked comes up if i try to open it in a new window.
I did like to know if any one could help me out to configure and solve this issue. Thanks.
I have my firewall configured to permit 443, certified ssl configure and the external access to OWA works fine but the attachment download, have i forgot to configure anything ?
Server is running Exchange 2003 and it is one machine just for it behind a ISA firewall.
I have a customer that relies heavily on her email (sends/receives about 200 emails each day). Last Friday we traded her Windows XP computer for a new Windows Vista system.
Now since that time one of her main contacts is unable to receive any emails. She is able to receive messages from that contact but the replies are not received by the customer. I talked with the technical support group on the receiving end and they tracked it back and said that the emails are sitting in their spam filter.
What change(s) were made that changed this trusted email account to a spam account just by upgrading to Vista? I ran the DNS Tools Spam tool and the domain and IP address is not listed in any database. The only thing that showed was something about the PTR not found in the domain record. Is this something that is required?
