A few days ago Outlook Express refused to continue sending emails using my hosted account. It has been working fine for over three years now. I changed the software and used Thunderbird but it failed two. They just say that the mail server took much time and I should check the SMTP server. I even tried that from several computers and several connections. The response from the host is too slow (dislike their usual).
View 11 Replies
I have run a server for some time with no troubles. All of a sudden the server will not allow outlook, outlook express, eudora etc to send emails. I can connect and receieve emails fine, but sending is another matter. I get a connection timed out message when I attempt to connect and send emails.
Sending email via Horde Webmail works 100% fine, it only seems to be when you send from a client side email app.
what might be causing this, or where to start looking? My experience with Linux is very, very limited.
I have WHM with centos and I have a customer who needs to send large attachments of 25 or 30 mb, he uses webmail. So the question is... how do i increase the load time?...
since i believe that is not a problem of data capacity... maybe his connection is too slow, and therefore he cant send large data.
And also how do i increase load time for the customers who use outlook aswell?
There is a strange problem with picking up and sending emails on Outlook 2007 which I have wasted hours on over the last week.
Whenever I try to pick up/send emails on domain names, I get a 800CCC0F error message. It says: "reported error (0x800CCC0F): 'The connection to the server was interrupted. If the problem continues, contact your server adminstrator or Internet Service Provider (ISP)'"
I have gone through all the steps here [url]and here [url]and on another websites.
I have been setting up email addresses on Outlook for several years, so know how they should be done.
The strange thing is the email addresses of domain names hosted elsewhere work perfectly. But both new and existing Clook-hosted email addresses are producing this error message.
I believe it may be an error with the software for two reasons:
1. The email addresses work perfectly when I open Outlook in Safe Mode.
2. Our web host's staff have not been able to find anything wrong and the email addresses work when they try to set them up on their computers.
Any idea why our email addresses may not be working and how I can fix this please?
I have tried System Restore and Repairing the program on my computer's Control Panel.
I migrated a client from a Windows server to Linux and everything is fine except that mail sent to this client (say, example1.com) from a particular domain (say, example2.com) simply disappears and does not reach at all. Mail sent to that other domain (example2.com) from my new client (example1.com) is delivered correctly.
Incidentally, that other domain (example2.com) from which the mail is sent is with the hosting provider who was earlier providing services for my newly acquired client. Should I suspect anything? Or, is there a way to figure out what's happening?
I have MailScanner running on my VPS, but it isn't configured to filter at RBL level, only at Exim level, so I don't think this is the issue.
Ever since I had a OS reload, all the mail in Horde will show up as "read" after I use Outlook to fetch them. (Exaim is installed, Outlook is using POP3 to connect) Even mail that have never been opened in Outlook will show up as "read". Before this, the mail in Horde was never synchronized with Outlook. For example, if I read a piece of mail, it won't show up as read in Horde. Instead, it'll show up as "unread" until I read it using Horde. Now, it the mail in Horde seems to be synchronized with Outlook though Outlok keeps a copy on server even after deleting it locally (on the PC).
I don't want that to happen because my other co-admin uses Horde and I use Outlook.
It'll mess up the read/unread settings for each. I never changed any settings in Outlook so it must be some config on the server. Anyone have a clue where to change this setting so this behavior doesn't occur?
I'm having problems setting up email in Outlook with cpanel configurations. I've exhausted google trying to find an answer to this. Maybe someone here can help or has had a similiar problem.
I've set up accounts in cpanel (eg: info @ example.com), have the incoming mail server and outgoing mail server as mail.example.com and I even checked off the "server required authentication" but I still can't receive emails. I changed the outgoing server to smtp.internetprovider.com and it still doesn't work. I get a prompt asking for Network Server Password and click ok with the login and password but it keep popping up.
I want to reinstall Windows Xp soon, as I got a virus and after cleaning the computer doesn't work as smooth as before. I gives some strange erros and sometimes it justs hangs up... I want to backup Outlook Express emails and settings before reinstall, and restore afterwards.
View 1 Replies View RelatedWhen i try to login from outllook pop3 is ok but smtp is error.
When i check mail log file:
Code:
Nov 4 16:28:07 server1 courier-pop3d: Connection, ip=[::ffff:176.43.150.48]
Nov 4 16:28:07 server1 courier-pop3d: LOGIN, user=test@xxxxxxxxxxxxx.com, ip=[::ffff:176.43.150.48], port=[23885]
Nov 4 16:28:07 server1 courier-pop3d: LOGOUT, user=test@xxxxxxxxxxxxx.com, ip=[::ffff:176.43.150.48], port=[23885], top=0, retr=0, rcvd=12, sent=39, time=0
[Code] ....
I try to past pci compliance,but now this is not importand. If there have some repair postfix command? Default configuration? Or how can i send emain from outlook.
I have just install on a new server plesk 12.0.18 Update #7 on centos 6.5 final.Added new hosting for the domain on a dedicated IP. All works fine (website, incoming mails etc) apart from outgoing mails.Both webmail (roundcube) and other mail software (outlook 2010, 2013 , android phone etc) outgoing mail i can't get to work.
I have attached screen from webmail with SMTP error (250) : Authentication failed..With Outlook it will allow me to set up account, test account setting... it say all all complete if i don't set secure connection (SSL)/requires authentication. But when you try sending mails you get the error: Your message did not reach some or all of the intended recipients.
Subject:test
Sent:16/07/2014 15:13
The following recipient(s) cannot be reached:
'x@xxx.com' on 16/07/2014 15:13
Server error: '554 5.7.1 <x@xxx.com>: Relay access denied'
When you set the outgoing requires authentication/ advance SSL you get:Send test e-mail message: None of the authentication methods supported by this client are supported by your server.I have tried changing to some outgoing ports to no avail.
I've managed to setup my cPanel box to allowed connections to port 995 for receiving POP email over an SSL connection.
However, I can't get sending to work.
My setup:
RHEL 4
cPanel 10.9.0 Stable
APF firewall
I allow outbound ports 25 and 26.
I'm not sure where to put them in APF to allow this.
Also - it won't work with the firewall off either.
This is the error I receive in OE:
Quote:
Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'mail.EDITED.com', Server: 'mail.EDITED.com', Protocol: SMTP, Port: 26, Secure(SSL): Yes, Error Number: 0x800CCC0F
I am looking at a VPS purely to outsource email sending to.
I curently use a cloud system - which is great - but they limit my email sending.
I need to send 25,000 a day and 10,000 during a one hour period.
Will any VPS allow this? Who?
Is this recommended.
one of our dedicate server which host only one website and use vbulletin.
we are unhappy about sending mail and it goes to spam box.
but we see that some website send many mail. for examle they have 1,000,000 user and send email to them every day.but their email send to inbox
what can we do about it?
I purchased a shared hosting with these guys. I transfer domain / Set up email accounts, ect. Everything is working flawlessly.
So, yesterday my boss was riding my ass because he said he couldn’t send email. I went over to his house, and he was right it wouldn’t send (his client is entourage). I verifier’s smtp settings, and it just wouldn’t send. I found the problem to be his SBC.
Of course he doesn’t believe that (still thinks the mailserver is the issue).
So to draw this to a close. is there any way to verify that an email is being sent.. such as a receipt that the 'message has been sent'? He's using entourage on the mac.
Also, what is you're normal procedure to troubleshoot smtp/pop issues?
i Own an e-marketing company and i have about 600000 email account
i want a web hosting solutions ( VPS or dedicated server) for sending 25000 email every day
so what is the best cheap choice VPS or server or what do you thing
i will host only one domain name
i have been receiving lot of spam emails with from and to address being the same email of my domain with content being "click here to see web page" or an image link of viagra shop seen. sometimes it is sent with title "delivery status failure"
i checked the mail headers and it seems that they do not originate with contact form since i used captcha to protect them.
I'm hosting with CoreNetworks (very happy with them) on a Windows platform. One of my clients has a 500-person email list. When they try to send using Outlook, the get the following error:Sending and Receiving' reported error (0x800CCC0F) : 'The connection to the server was interrupted. If this problem continues, contact your server administrator or Internet service provider (ISP). The server responded:? 1 Too many bad commands, closing transmission channel'
They didn't have any problems with sending from the list before, when I was in a shared platform with AIT. Ideas as to what the issue could be? I've done some research but can't seem to figure it out.
I got plesk 8.2 on a linux machine (CentOS 4.3).
I'm having probs sending emails.
I created a few email accounts for a client. they can receive emails with no prob.
however, if I set my server as the outgoing server, they are unable to send emails.
could I be missing some packages?
I'm using smtp.domainname.com as setting.
I am trying to send an email from a php script on a Webfusion VPS.
$to = "me@atmydomain.co.uk";
$subject = "Test subject";
$msg = "Test message";
$headers = "From: you@atyourdomain.co.uk
Reply-To: you@atyourdomain.co.uk";
if(mail($to, $subject, $msg, $headers)){
echo "Sent";
}
else{
echo "Error!";
}
The page displays "Sent", but I don't receive the email.
Is there a setting that I should me making in either the script or via Plesk or elsewhere to enable the emails to be sent?
I phoned Webfusion support, but they claim they only support hardware. Webfusion's help pages just say:
I'm setting up a formmail script on my Linux VPS server? what is the path to sendmail?
The path is: $mailprog = '/var/qmail/bin/sendmail -i -t';
But it doesn't explain where to put this line of code. And if it should go in the php.ini file how do I get to that?
we have reseller hosting package...our server says 100 mail per hour..more over our server mail is being send to bulk...
our one client wants to send 2000 news letter every week to his subscriber...for that we want to take service ..most probably and mailing server...
so which are the cheap ,relaible and best one( means whose mails sent doesnt go to bulk means 100% clean...) and who gives us switching option to thier another server if ther mail server is blacklisted or mail starts to go to bulk
I'm using a leased linux server that uses cpanel and webhost manager.
I'm trying to set up email accounts and receiving is working just fine, but when I try to send, it isn't working at all. The way i'm setting up my account on thunderbird is
server name: mail.domain.com
port: 25 (also tried 26)
Security and Authentication: use name and password is checked. User name is user@domain.com.
use secure Connection: No
is there some setting in my WHM that I need to change to use my outgoing email
I have a customer company whom I host on my server. They claimed they have problem with their sending email through my server. I tested it on my own Laptop both at work and at home and it worked. But when I tried it on their PC and laptop, I noticed that what they claimed was true. I did the exact configuration og my Thunderbird on their PC and laptops but it still can't send email. What do you think can be the reason?
FYI, the server runs on Fedora 5 with WHM/Cpanel.
I have a client who is a media company and is interested in using a dedicated server in order to send their daily e-newsletters by email. The server will only host a script for handling the email distribution and email database.
They need to send approximately 20,000 emails every working day, in blocks of 5,000 emails. Each email includes an attached PDF file of 3Mb (this means less than 2,000Gb of bandwidth every month). They want each block of 5,000 emails to be sent within maximum 2 hours.
Please let me know the suggested configuration for a server to handle this email load.
My company's domain is mycompany.com and we are hosting our corporate website in our own datacenter.
Now I want to create another website subdomain, site1.mycompany.com, to be hosted in an external third party datacenter.
Is it possible for me to send out email from the third party servers using the address info@site1.mycompany.com? I do not want to spoof any outgoing mail.
I currently have a shared hosting provider which I am happy with but I have come across the need to exceed their email sending limits (which is 20 emails per minute).
I am planning to run a one-day (might even be one-hour) online contest where my customers would fill out an online form where a php script inserts the form contents into a database and then sends a confirmation email to both my customer and two additional email addresses (Me and a partner).
I am expecting up to 100 forms a minute to be submitted (which would translate to 300 emails) so I am looking for a reliable solution to do this without spending more than $20/month. "Throttling" the emails is not an option as delivery is time-crucial.
Are there solutions out there that would handle this kind of scenario? Or perhaps solutions where I can keep my existing provider and use the new one just for scenarios such as this?
my root@myserver.com
can send email, ( I tried from my webmail)
it does not accept emails
Currently I am on a shared hosting service. My main concerns are to send a newsletter every fortnight which has an attachment of about 3 MB and has to be delivered to 800+ members.
In doing so on a shared hosting plan i receive a memory allocation error as the php.ini has 32 MB and i cannot change it because i am on shared hosting. I am using Joomla and Acajoon component to send the mails; after every 7-8 mails out of 800 members i recive the fatal error of memory allocation and I am looking for a solution to this problem.
My main concerns are of sending 3 MB attachment mails to the members . What kind of hosting should i go for in order to send mails successfully.
Would VPN be useful .
Also what exactly is DNS hosting?
