Having been away from the hosting field for a few years returning back I notice some hosts are offering IPs with, for instance, personal basic plans. Some are even offering 15 IPs to anyone. And 350GB disk space and 1TB data transfor for $3.95, but that is another question. I wonder how they get butter on the bread with these prices.
As for IPs how do these companies get their IPs? Are there no more Icann restrictions?
any restrictions on owning a .co.uk domain if one lives in the usa or should i have my uk friend register it?
View 6 Replies View RelatedIs there any hosting providers without file number limits? Or higher limits...
I've been using dreamhost, but found that they have a 500k file number limits. So now i'm using less than 2 gigs of disk and still have 370+ worthless free gigs of disk space
im using old htm pages work with php which works on localhost, but upon upload to yahoo server i need to upload a revised .htaccess which yahoo restricts
how can i read my htm pages in yahoo to work or read php in it?
other options that will work in yahoo?
getting a dedicated server and wanted to know what the differences are between Windows 2003 Web and Standard editions?
to run some activeX DLL's I have compiled on one of my websites that will be hosted on the dedicated server - can I do this on the web edition?
I'm getting this warning from check server security option in csf :
--------
You have a local DNS server running but do not have any recursion restrictions set in /etc/named.conf. This is a security and performance risk and you should look at restricting recursive lookups to the local IP addresses only
--------
I saw named.conf but In fact I didn't understand what should I do
Can somebody tells me what should i do and what this warning trying to tell me?
can anyone direct me to a host that allows me to run an IRCd with IRC bots and bouncers?
The webspace should be 5 gigs or over and the bandwidth should be 20gigs/m or over. Free management (like offered on web intellects) would be great aswell.
I have a 40-50$/m budget.
I'm migrating from Plesk 9.5 to 11 and I'm getting the following on my Transfer Pre-Check from within the Migration Manager."The destination DNS server does not support networks in the Transfer Restrictions Template, but some subscriptions have networks in DNS transfer restrictions. The records with network IP addresses in the DNS transfer restrictions will not be restored."
I've gone to Server, DNS Settings, Transfer Restriction Template and added the new server's IP to the list of allowed networks to no avail. I also couldn't find any documentation on what the cause might be.
There is a junk email filter on my server and my host has said that I need to transfer the mail in the webmail interface to the spam folder so it can learn what is spam. The spammed mailed as tagged as you can see but it only grabs about 1/10th of them. I get between 300-400 spam emails per day and I have to filter through all of them to get my good messages.
I changed the contact form on my vbulletin to use another address but then the spam started coming there too!
I haven't transfered anything to the junk email folder in months so I will try that some more but is there anything else I can do?
[url]
I've notice that LFD (from CSF) is not sending SSH Login notification anymore...
I've tried "mail root" and "mail <my email>", it's working.
I see the login line in /var/log/secure
Tried to tail exim_maillog and I did not saw it at all!
I've tried to restart CSF and also look at the configuration, SSH is still there...
I'm running CentOS 4.x with cPanel
Got any clue ?
I've got an other server, same configuration and he's still sending the notification.
The update seemed to run well (no error logged) after the restart of the panel I recieve the following error
Code:
Unable to generate the web server configuration file on the host <hxxxxxx.stratoserver.net> because of the following errors:
Template_Exception: nginx: [emerg] PEM_read_bio_X509_AUX("/opt/psa/var/certificates/cert33eyTaV") failed (SSL: error:0906D064:PEM routines:PEM_read_bio:bad base64 decode)
nginx: configuration file /etc/nginx/nginx.conf test failed
file: /opt/psa/admin/plib/Template/Writer/Webserver/Abstract.php
line: 75
code: 0
resolve the errors in web server configuration templates and generate the file again. The panel suggests to auto-recreate the bad config files, but the error persists.
I have been DotXM's customer for the previous 2 months. Due to some unforeseen circumstances, I had to terminate my hosting with them.
A month later, I am still being charged the subscription fees by paypal. Confused, I decided to look into the matter and found out that my paypal subscription to DotXM is still not canceled. I did not have a single clue that I have to cancel my subscription to DotXM in paypal too.
I have tried emailing DotXM owner several times with no reply. Shouldn't an ethical business person refund my money in this situation?
does anyone know what would cause a linux box (CentOS) to suddenly stop asking to overwrite or not?
Like before on this 1 particular box I would have to type:
cp file.txt file2.txt -f
in order to enforce overwrite
but recently if I do
cp file.txt file2.txt
it doesnt ask if I want to overwrite the file, it just does it
I think this happened with updating to the newest kernel and/or CENTOS 5
how to turn it back on so you have to answer YES/No (y/n)?
I made the idiotic move of not making a backup of the default configs and now I can't access my http website externally. ssl works fine, but I need http to work too.
View 3 Replies View RelatedAfter having some issues with my server mail program i read an article online where i though removing psa-courier-imap will resolve my mail problems.
Now nor my email is working but also i lost my plesk panel. Going to plesk ip address there's nothing anymore.Checked my server and is printing i have plesk 11.0.9 installed but is nowhere to find. I try to install psa-courier-imap again but yum cant find it.
Everything working on the server including all sites are available on the web.The only think i'm missing is the Plesk login page.
It seems like I have got a lot of trouble with Plesk 12 on a CentOS 7 machine.
1. I could not install Plesk properly due to some drweb problem.
2. Than the smb configuration seems only to be implemented partly.
3. Suddenly FTP login is not possible anymore (503 Access denied)
And now even Apache is not running anymore!
Code:
Unable to generate the web server configuration file on the host <xxxxxxx.dyndns.org> because of the following errors:
Template_Exception: [Mon Jun 08 14:16:28.058302 2015] [so:warn] [pid 4230] AH01574: module actions_module is already loaded, skipping
[Mon Jun 08 14:16:28.063364 2015] [so:warn] [pid 4230] AH01574: module headers_module is already loaded, skipping
[Mon Jun 08 14:16:28.063957 2015] [so:warn] [pid 4230] AH01574: module logio_module is already loaded, skipping
[Mon Jun 08 14:16:28.066150 2015] [so:warn] [pid 4230] AH01574: module suexec_module is already loaded, skipping
httpd: Syntax error on line 357 of /etc/httpd/conf/httpd.conf: Syntax error on line 5 of /etc/httpd/conf.d
[code]....
I installed XAMPP a few weeks ago and had a php website working on my localhost – all worked fine no probs. To do this I had to stop my IIS server as this was also using port:80 which is what XAMPP is set to use as default. Now for some reason when I started IIS again a few days ago to do some asp development work and then stopped it again, the apache server would not start even though I’ve definitely stopped IIS. I have tried uninstalling and re-installing XAMPP, but it still won’t start. I tried running the apache_start.bat from the command line and I got the following error message:
"An attempt was made to access a socket in a way forbidden by its
access permissions": make_sock: unable to listen for connections on address 0.0.0.0:80 no listening sockets available, shutting down
Apache could not be started
If I try and start Apache from the XAMPP control panel it just says Apache:stopped and the message in the bottom window is ERROR: Apache service not started [-1]
I was just wondering if you had come across this problem before? If yes, how did you resolve it? Someone mentioned changing the port, but being a bit new to apache and XAMPP I’m not really sure what would need to change in what config files.
Last week I was traveling, and we had problems with one of our fairly critical mail servers, problems I really did not want to try to resolve from airport or hotel Internet in South America. So I decide to just lease a clean dedicated server, and setup mail there, and bump over the DNS. Easy, right?
So I pick a hosting company, one that advertises 1 Hour Setups, for obvious reasons, we are losing mail.
I sign up for a $69.99 Linux Dedicated Server, and pay a $50 setup fee, they charge my credit card. Then at the end of the process, I am greeted with a demand to fill out and fax this Service Order, with my CC info on it. Needless to say, I didn’t have access to a fax machine, or scanner.
So I blow another $35.00 on eFax and fill the damn form out in Photoshop, a complete pain in the ass to buy a cheap server. I fax it to the hosting company, and don’t hear from them again. I contact their Live chat support, and they tell me it takes 24 to 48 hours for the account verification process by the sales department, before my 1-hour setup starts.
And then 24 hours later, I get an email from the hosting company, requesting a copy of my credit card, photo ID, and a utility bill for my home address. Impossible for me at the time, so I cancel the order.
And then…yes, it gets better, they tell me they can’t refund my credit card for 3 to 5 days, with some nonsense about their company policy.
This would have been a colossal pain in the ass if I had been sitting at my office, with my full staff at my disposal, but while traveling it was simply impossible. I understand fraud prevention, and charge backs, my company takes credit cards as well…but we do not make it so hard on our customers to spend money with us that they simply take their business elsewhere, just to prevent a possible chargeback.
Ironically enough, I am probably going to have to call my bank today and file a chargeback, as I have not seen my refund from this horrible excuse for a hosting company.
Are there any companies out there that have a clean and easy setup process that do not require a stack of paperwork and the need of a fax machine and scanner to rent a server?
Server :
pentium IV 3.0 Ghz
debian 3.1
kernel 2.6
apache2
php4.3.10
Some months ago I installed php4 on this server , and added eaccelerator.net , mostly with this site as guide. Everything worked fine.
Few days ago I realize I hadn't updated this server for a while. I run 'apt-get update' and 'apt-get dist-upgrade' . A whole lot of things get updated, and after that I perform a reboot, as adviced by the update script.
The next day I experiment a bit with the profiler of xdebug . I manage to install it , play around with the results, but decide to uncomment it from php.ini again as it is not that helpfull to me and it makes quiet big log files too.
Today I notice this server is getting very big loads. Normally on peak evenings it would float around 2-4 , with sometime jumps to 10-12 but always quickly recovering and working well. But on this evening it kept rising, stayed around 30-60 for most of the time, and even hit up to 85 . It only lowers when the busy hours are really over. So I look around everywhere , and then after a few hours I notice that eaccelerator is not visible in phpinfo(); anymore. This is the only weird thing I could find, and I assume this caused a big difference on the performance.
I dont know why exactly it went away. Maybe it was the server update, wich touched a lot of files. But I thought it was not supposed to update any configuration files, not without warning at least. I could also have been the xdebug script, wich also uses 'phpize' to install and also required editing in php.ini . I really wish I noticed the lack of eaccelerator after the update but before trying xdebug.
So I try to install eaccelerator again. Unpack from source, phpize, make, etc etc, just as last time. I edit php.ini to make sure the load command and settings of eaccelerator are still there and reload apache. I check phpinfo(); , but nothing changes. I try it all again to be sure, but still nothing. I check the location of the .so files, yes they are still there and the rights of the files look ok.
I edit php.ini again and uncomment 'extension=mysql.so', and reload apache. I notice a mysql error on my site as expected. So that means I'm really editing the right php.ini file and that I can influence the extensions that are loaded. I add the mysql extension again and reload apache.
I load an old php.ini backup file, from right after first installation of this server. The eaccelerator settings are there too already, but if I try it and reload apache : no difference.
I reboot my server again, because .. well sometimes it helps. But not with this. phpinfo(); still says no eaccelerator.
I check another server, exact same specs, same php+eaccelerator installation on the same day as the first one. I compare versions of apache/php/php extensions/zend extensions and all numbers I can find. Everything still looks the same, except server 1 does not have eaccelerator and server 2 still has.
I'm shomehow out of things to check now. I'm pretty sure eaccelerator has a big influence on the performance of my heavy php site, and I want it back. Everything looks ok, the files are there, the settings in php.ini are there, it should work ... but it doesnt. No errors or warnings anywhere, just phpinfo(); saying that eaccelerator has not been loaded and the high loads are confirming this.
It will either be a very complicated solution, or a very simple one, but I'm just looking over it. Does anyone has any tips on where to look or what to try ? Thanks.
I've updated to Apache 2.4.10 from 2.4.9 and all of a sudden my pages don't load anymore.Previously I had this issue rarely and closing the PHP-cgi.exe processes fixed it.But since the update the issue happens almost constantly.
View 17 Replies View RelatedSymptoms are that two of my domains are not resolved anymore, one of which is my mail, the other the plesk default. So even I try to login by ip, it bounces to the default name and that does not resolve.
This probably happened yesterday morning and i see an autoupdate log, so i can't think what else would cause this out of the blue, since i am on holiday and have not touched the server for three weeks.
The log doesn't really have errors, just one warning i saw, about packages not beeing updated, using old ones. But that was only passenger, so ok i guess. The log is rather big and so i didn't read it all. It ends by saying patch for 12.0.18 will not be applied and errors in apt-get update, that i mentioned.
The domains were set up like many others that still work, as masters.
I can log in as root, so if i could just let me log in by ip again.
Linux auringostaitaan.fi 3.2.0-4-amd64 #1 SMP Debian 3.2.63-2+deb7u1 x86_64
>plesk version
Product version: 12.0.18 Update #36
Update date: 2015/02/21 07:05
Build date: 2015/01/26 15:00
Build target: Debian 7.0
Revision: 333059
Architecture: 64-bit
Wrapper version: 1.1
unfortunately plesk was upgrading automatically and something goes wrong.The update is successfully installed but now I can't see all the website images...I'm running this plesk version: Plesk version12.0.18 Update #6, last updated at July 1, 2014 03:24 AM...Is there something that can I do for restoring images?
View 4 Replies View RelatedI have a freshly installed Plesk 12 on CentOS 7.
FTP logins worked fine yesterday. Today I get a 530 Login incorrect.
I think the only change since yesterday was a server reboot.
/var/log/secure tells me that /etc/ftpusers is missing
Code:
Jun 8 00:33:19 macbook proftpd: PAM unable to dlopen(/usr/lib64/security/pam_stack.so): /usr/lib64/security/pam_stack.so: cannot open shared object file: No such file or directory
Jun 8 00:33:19 macbook proftpd: PAM adding faulty module: /usr/lib64/security/pam_stack.so
Jun 8 00:33:19 macbook proftpd: pam_listfile(proftpd:auth): Couldn't open /etc/ftpusers
What went wrong, what would be the solution?
it works fine for months but now when i type: mytop in SSH i geto erro:
----------------
Cannot connect to MySQL server. Please check the:
* database you specified "test" (default is "test")
* username you specified "root" (default is "root")
* password you specified "" (default is "")
* hostname you specified "localhost" (default is "localhost")
* port you specified "3306" (default is 3306)
* socket you specified "" (default is "")
The options my be specified on the command-line or in a ~/.mytop
config file. See the manual (perldoc mytop) for details.
Here's the exact error from DBI. It might help you debug:
Unknown database 'test'
---------------
I also try to reinstall but nothing...
after upgrading from 11.5. to 12.0.18 all web Hosts which are using asp or aspx files are not working anymore.
We get following error:
HTTP-Fehler 404.17 - Not Found
ModulStaticFileModule
BenachrichtigungExecuteRequestHandler
HandlerStaticFile
Fehlercode0x80070032
Angeforderte URLhttp://www.ratg.at:80/index.asp
Physikalischer PfadC:Inetpubvhosts
atg.athttpdocsindex.asp
AnmeldemethodeAnonym
Angemeldeter BenutzerAnonym
If we try to repair the Installation with the reconfigurator "Plesk virtual Hosts Security" the program is crashing.
I have a fully working clean installation of Plesk 12 + updates (CentOS 6.5 x64). Previous installation was a test and was working just fine with the license file.Today I did a clean install. When I tried to restore my original key file (Parallels Plesk Panel 10.x/11.x and Later 100 Domains w/1 yr SUS) I get the following error:
Code:
ERROR: bad arguments (key_upload.php:76)
As result I'm not able to create domains and start using the server/panel.