I'm tying to assign nameservers to my new server in whm.
I am trying to do ns1.mydomain.com and ns2.mydomain.com. I would like to manually choose which IPs are given to each nameserver, but WHM is doing it automatically and selecting an internal IP for one.
I don't want this. How can I choose?
Will the nameservers work if the nameservers are pointed to a parking page?
For example:
I need to change my nameservers to ns1.mywebhost.com and ns2.mywebhost.com
(nameservers are made up)
These nameservers are from my web hosting service provider. When I visit the nameservers, it shows up a parking page from a domain parking service (let's say NameDrive parking page)
Will the nameservers function correctly and will my websites work? I have this question because usually the nameservers that I use, they always point to a CP page or something like that rather than a parking page.
currently running a SAN which has 1TB... I would like to add another 1TB to the SAN to mirror the first set and use it for a 2nd server. What's the best way I can do this?
View 0 Replies View RelatedI am making a new site based on a similar site which has the same content.
Is there anyway of doing a server-side site duplication? Rather than having to upload an 800mb backup file of the entire website?
Gmail is sending duplicated emails to our server. The time stamps would differ about 10-20 minutes for each same email and usually would duplicate up to 10 copies.
View 2 Replies View RelatedI am in a little bit of trouble I got a couple (5) of 750GB hdds that I need backed up to another couple (5?) of 750GB hdds so I can save the data storage on them. They are in a Linux box with a LVM setup I also have a RAID ware card on it but not using any RAID # on them. I decided after finding out what I could do with it to go to Windows 2003 on the server and installing RAID5/6 on it.
It seems that I will have to give up all my data and have everything wiped off from the hard drives this is very sad for me but I still have a chance to save the data on them. So I am thinking of copying them to another bunch of hard drives and then re-add it once the system is in place.
I was looking at this
[url]
But thats clearly too expensive as I just need to back up 5 hard drives (750GB/each) and just need to do it one time. Anyone have any suggestions to this or how should I go about doing it. It doesnt have to be right away but its good to know my options.
Is there any place where they might to do this kind of stuff they let you rent their machine for a couple of hours for a fee so you can back up your data? The server is a COLO and the hardware is mine so I have every right to take it off and back it up with no problem from the datacenter.
how do I go about creating the same user with the same id on different linux boxes so when i share a mount folder, it has the permission to write and read properly?
View 2 Replies View RelatedI have several websites setup as follows:
- uploaded on host 1 at dedicated IP 111.111.111.111
- and also uploaded at host 2 (backup host) at dedicated IP 222.222.222.222
The dns A-record constantly points at host 1 (IP 111.111.111.111); in case that host fails, I manually switch the dns A-record to host 2 (IP 222.222.222.222).
Being dedicated IPs, I can simply type them in my browser's address window, and I see the index page of my website.
So, in fact, my site can be accessed via 3 urls: my_site.com, 111.111.111.111 and 222.222.222.222.
The question is: will that get me into trouble with Google and other search engines that may see there a duplicate content at 3 different urls and penalize me for that? If yes, how can I avoid it?
We are having some problems with a Foundry Bigiron 4000.
The hardware config is as following:
- Bigiron 4000 chassis
- 2x B8GMR3-A management (active + standby)
- 2x B24E
Once every couple of days now, we get the following error in syslog:
Code:
2009-10-05 20:40:00User.Warning8x.xx.50.1Oct 5 20:39:59 gateway IP: IP: Duplicate IP address 8x.xx.38.1 detected sent from MAC address 0004.d3ea.e200 interface 3/13, 1 packets, first packet received at time 1 days 20 hours 41 minutes 37 seconds since bootup!............
we have a subdomain blog.ourdomain.com that we installed wordpress on to publish content for our static website. We were short of time so we set up Comment kahuna to publish articles in the spaces between our posts (bad idea we now know).
Our page rank has stayed at PR2 for over 2 years.
Now - We have moved to a cms that has a blog included and wish to start blogging on that platform (fresh new regular content).
We cannot transfer all the posts to the new platform and why would we as it is duplicate content.
Problems if we change the subdomain to the new blog we will generate about 110 pages of 404 errors as all the pages are indexed from the old blog.
if we leave the subdomain as is we can htaccess all the old urls to the front page of the new blog (we do not know the .htaccess syntaxt to do this so any ideas)
existing subdomain is apache, new system hosted at different ip on windows server and is SAAS no access to iis.
Issues -What will happen to our PR if we remove duplicate content but create the 404 errors
Should we just redirect the subdomain to the new blog and be patient?
I already have a web account with a shared web host. My site is growing. I want to buy a new account with a different web host but I'm afraid that the servers will be slower (the specs are better, but maybe it has more sites hosted on it or they are dishonest etc.?).
So, when I buy the new hosting account, can I simply copy and paste my site over and see which server serves the page faster? Then I should be able to decide which server to associate the domain name with...
After updating our server from plesk 11.5.30 to 12.0.18, one of our subscribers is receiving duplicate emails, a varying number anywhere between 5-15 of the same message!
Running plesk 12.0.18 on a CentOS 6.4 Cloud Server
This is a clean installation of Plesk, nothing else has been done on the server. After the Plesk 12 Installation I installed the Route53 Extension directly from the Panel.
I authenticated with the Access ID / Secret key, as soon as I start creating Domains I get duplicated zones in Route53. When I delete the Domain from Plesk only one Domain gets deleted, the other one remains.
This is my debug log where I see it executes the script twice:
Code:
[2014-12-10 14:50:15] DEBUG [panel] DNS Custom backend call: [{"command":"create","zone":{"name":"dummy123123test.nl.","displayName":"dummy123123test.nl.","soa":{"email":"vincent@mkbsc.nl","status":0,"type":"slave","ttl":86400,"refresh":10800,"retry":3600,"expire":604800,
"minimum":10800,"serial":1418219415,"serial_format":"UNIXTIMESTAMP"},"rr":
[Code] ....
The strange thing is, in the custom call it lists all the records twice as well..
When I disable the Plesk DNS Template it doesn't create Zones at all, when I then enable the Template per domain it creates one Zone correctly.
PRODUCT, VERSION, MICROUPDATE, OPERATING SYSTEM, ARCHITECTURE
Parallels Plesk v12.0.18_build1200140610.21 os_Ubuntu 14.04
PROBLEM DESCRIPTION
On Sub creation Plesk creates two hosted zones in AWS Route53
STEPS TO REPRODUCE
Install Plesk 12
Install Route53 Extension from Panel
Create subscription
ACTUAL RESULT
Duplicated zones in AWS Route53
EXPECTED RESULT
One Hosted Zone in AWS Route53
I have a couple of clients on my server that happen to do business with a college here locally. For some reason when anyone from the college emails a user on my server, my clients end up getting 20-100 duplicates of the same email. I contacted their IT staff and they say it is on my end and that my server is "cutting off the sending process before it completes". If that was the case, then the user would not receive the first email.
Is there something on my server that could be causing the issue? My server is Plesk 12.0.18 update #38 running Qmail/Courier-IMAP. The server has no issues otherwise.
I'm having a hard time configuring this setting for nginx on a domain, whatever i try i cant get it to accept files as big as I need. Every time i try i get this red message :
Code:
Configuration Nginx non valide : nginx: [emerg] "client_max_body_size" directive is duplicate in /var/www/vhosts/system/domain.fr/conf/vhost_nginx.conf:4 nginx: configuration file /etc/nginx/nginx.conf test failed
I followed these instructions: [URL] ....
Strange thing is there was no panel.ini file where the instructions are pointing so i created one, but still, i cant get that directive to work.
Before plesk 12 (with 11.5) i finally got it to work by manually editing some nginx conf file on the server, but i can't find anymore how...
i want to have a windows server and make 5 vps on it what should i do to make the vps
is there is additional fees or i only pay the money of the server & for the windows
i have windows 2003 dedicaited server i need software so i can make vps i need a free one and easailly to make vps and assingh ips and stuff
View 1 Replies View RelatedI was wondering I've been having problems with getting my web server going.
I'm using Apache 2 on my Windows XP SP2 machine. I have a Linksys WRT54GX2 router, and I have Charter 3MB Cable internet. I already called charter to see if they allowed web servers and they said they do. I also asked if they block ports, and they said they don't.
Now my problem... So, I originally thought maybe charter blocked port 80, so I used NO-IP to work around that, I did port forwarding through that. Well, I used there tool canyouseeme.org and it said it couldnt read any ports i put in.
All my firewalls were off and i had my router firewall off. I even put my computer in the DMZ part of my router. I'm about to see if i can connect my modem directly to my computer without having a problem but i wasn't able to a bit ago. Anyone got any clues to waht i could do if nothing changes when i put my modem to my computer.
I tried everything, nothing seems to work. I was in IIS for a good 2 hours on my windows box trying to figure out how to setup an FTP on a specific directory. Whats a good program to use for a windows FTP to easily setup a read only FTP. I just want to be able to allow me and my friends to grab the files out of one specific directory.
View 4 Replies View RelatedWhen you try to change the password of the client to login the control panel gives an error: SQLSTATE [23000]: Integrity constraint violation: 1062 Duplicate entry '<login>' for key 'login'
The impression that instead of UPDATE done INSERT.
Parallel Plesk Version: 11.5
OS: Debian Squeeze
Window server 2012 r2: I installed wordpress on a domain using plesk. Seemed to work correctly. But when I went to the site www.example.com/wp-admin, the native or default wordpress install started up. I could find no way to bypass this, so I just re-entered all the same settings.
The result was that I ended up with 2 sets of database tables, one set named with my chosen prefix wp_blahblah_ and one set prefixed with wp_blahblah_wp_.
Not good, so I deleted the later set. Wordpress seems to be working, despite one error on the tables I can't reproduce.
I am trying to customize the knoppix CD so that the SSH server can be started while the system has been booted up. I've tried to install the service and setup the appropriate run level (update-rc.d) but still the SSH daemon couldn't be started up automatically. I had to start it up manually while the system is booted up. I have an idea is to put the startup command in the /etc/rc.local, but not sure if that would work, but I prefer to start it up from the run-level. And what about the /etc/inittab, any idea on that?
View 2 Replies View RelatedMy brother is moving from shared to VPS.
Apollo has a managed VPS for $40 (with 20% off for a yearly purchase).
25GB:750GB:512MB
Any problems with this package?
Any problems specifically with Apollo VPS?
Hey heres what happens when i do a traceroute to amazon - over a maximum of 30 hops:
11 33 ms 35 ms 36 ms ae-7.ebr3.Atlanta2.Level3.net [4.69.134.22]
12 58 ms 53 ms 54 ms ae-2.ebr1.Washington1.Level3.net [4.69.132.86]
13 53 ms 53 ms 53 ms ae-81-81.csw3.Washington1.Level3.net [4.69.134.1
38]
14 47 ms 48 ms 47 ms ae-3-89.edge1.Washington1.Level3.net [4.68.17.14
4]
15 * * AMAZONCOM.edge1.Washington1.Level3.net [4.79.20.14] repo
rts: Destination net unreachable.
Trace complete.
Is there a way my server unreachable without installing a hardware firewall?
I've ordered 1gbit/s port with one my dedicated servers. But I am still unhappy with the speed of download.
I have 2 mbit DSL connection at home and I can download files with 90 kb/s from the server. I also see the same speed on a 100mbit port server. But I can download files from RapidShare with 210 kb/s..
What do you recommend me to do make faster downloads from server-side?
Hello. I owned a VPS not long ago, and hosted my WordPress enabled site on there. I used approximately 9 plugin's, all of which are very low-usage and mainly used for the backend. I noticed during every day use the VPS slowed down, is this due to the WordPress script or the VPS itself?
The VPS had 1024mb RAM (1531mb burst), and equal share CPU.
I don't own the VPS now, but would appreciate some answers as I may buy a new one soon to host the same type of site.
build our our server network for our business and power it with our new 15Mbps/15Mbps Fios Business Plan.
Now I know enough to set up a home network just fine but dealing with a server end is a little different.
What I need a for someone to help me with advise on hardware for our setup ie: Routers, Switches, ect ect
We are looking to start with 2 boxes at this time and may go as big as 5 so we want to be sure we have the equipment to handle it
I would like a Router that allows me to connect 2 uplink connection so if we need to upgrade we can add a 2nd fios line.
a decent router to handle this?
I did have a chance to really talk with the owner, Navid on the issues I did have and on what was really going on. One of the things I did have trouble was downtime, and I was assured no more of this, and latest news on what was going on.
Some of the new things they're doing
- New support staff, and more
- New servers from DC (Databank?) (which i'll be moved too ;])
- Less or No downtime at all; and total care support
- More support options
and the results are being seen, they immediately solved all my issues hopefully I won't run into them, but dear members who read this, as a owner; I've decided to go sole proprietorship and work sales, support, billing; all from my blackberry and cell phone around the clock, and downtime is the last thing I can have. Currently I have over 125 accounts and being one of the top free hosts, and clients new to the web = lots of questions. So uptime and reliability from a powerful host is needed. I thank BuyAVPS for making the turnarounds and though they've been only for 1 year, they're one of the rare hosts with the right price and great deals.
I must say, they're support team is fabulous and has been helping me out constantly, from installing scripts to great support and now they're offering more support options.
I've been with them for now 3-4 months, or maybe more I've signed up when they started; and they're coming a long way now and soon to be one of the best vps hosts.