I run a small website on a dedicated unmanged server with cpanel.
About a month ago,i stopped getting the daily mails from addresses that are located on the server...
Also,when I attempted to send mail to one of these addresses I never received it...
Its a RHEL 3 server with cpanel,is there anything I can do to see where the problem is?
I have a dedicated that suddenly stop php mail() function to work.
Very strange because if I run php script with mail() function as root on command line all working fine.
But If I run php script with mail() function in my browser so not work. Seems that only ROOT can run mail() function.
I have been having great trouble sending mails from my local Thunderbird/Windows client to my Debian/Exim-server via TLS/SMTP.
I am no expert on TLS and SMTP, but I managed to create a server certificate and set up a secure (TLS) connection more than a year ago, and it has been working fine until it suddenly stopped working a couple of weeks ago.
Sending to external addresses from web pages still works fine, the problem seems to be in the SMTP connection. If I try to "telnet xxx.xxx.xxx.xxx 25" I get no reply whatsoever (it seems to connect but it just gives me a blank screen with a blinking cursor) and I am wondering if there is a firewall issue or if I am simply not running the right daemon to listening for incoming SMTP connections...
POP continues to work fine with teapop/stunnel enabled.
I am running Exim 4.63-17 on Debian Etch. I configured Exim to be of the type "internet site; mail is sent and received directly using SMTP"
==============================
Firewall shouldn't be a problem (?):
debian:~# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
==============================
I really don't know what to do. I have tried running:
tail -f /var/log/daemon.log
Which responds when I access my mail using POP but not when I try to send using SMTP.
Yesterday I could reach all of my cPanels on a Vista laptop; today they all time out. I can reach them with other computers. It doesn't matter if I go to mysite.com/cpanel or mysite.com:2082. I even added a port 2082 under Windows Firewall; no change. I'm not using any 3rd party firewalls. I did install a bittorrent client last night, then uninstalled it when it didn't work.
View 3 Replies View RelatedGetting the following error in webmail when I try to acces nutsmail(squirrelmail):
Warning: strpos() [function.strpos]: Empty delimiter. in /usr/local/cpanel/base/3rdparty/squirrelmail/plugins/administrator/auth.php on line 34
Recently I noticed that I was not getting any email on my server.
Server is running CentOS
When I send email to myself I am not getting anything and then it bounces back several days later saying the server is not responding.
When I check on Dnsstuff.com I get the following:
Trying to connect to all mailservers:
mail.webzila.com. - 216.32.77.68 [Could not connect: Could not receive data: Operation timed out.]
[Note that if your mailserver takes over 30 seconds to respond, our test will timeout, even though real mailservers will wait longer]
I tried turning mail services OFF and then ON again in Plesk but that didnt help.
I have a server that I access through remote desktop. Suddenly I am getting the message "Remote Desktop Disconnected: The computer can't connect to the remote computer." when using Remote Desktop.
It was working a few minutes ago.
A while ago I suspected that someone knew the password for the box. I did change it at the time, and thought the issue was solved. Is it possible to turn off remote desktop remotely (whilst using remote desktop).
Power cycling the server isn't making any difference.
Any other options other than putting in a support request at the host?
i havent touched the config on my vps box for months and it has been running OpenVPN without any problems.
All of a sudden it is complaining it cant find /dev/net/tun
Nov 15 06:45:18 gizmo openvpn[23616]: Note: Cannot open TUN/TAP dev /dev/net/tun: No such device (errno=19)
Nov 15 06:45:18 gizmo openvpn[23616]: Note: Attempting fallback to kernel 2.2 TUN/TAP interface
Nov 15 06:45:18 gizmo openvpn[23616]: Cannot allocate TUN/TAP dev
ls -l /dev/net/tun
crwxrwxrwx 1 root root 10, 200 Jul 4 21:55 /dev/net/tun
any reason why it would stop working? i am on a VPS i have asked if the host machine parameters have been changed but in the meantime anything else i can check?
I have recently migrated my websites from Plesk 11.0.9 to a new server with Plesk 12.x and the webalizer is not working.
- Is there a chance to repair it and not loose the data? If yes, how do I do that?
- Or do I have to remove it and install Webalizer again? How do I do that?
OS Ubuntu
Uninstalling Webalizer with plesk updater is not possible.
After executing this:
Code:
# /usr/local/psa/admin/bin/statistics --calculate-all
I get:
Code:
WARNING during statistics_collector execution: : Executing logs preparation...
error: error creating output file /var/www/vhosts/system/domain.tld/logs/error_log.1: File exists
statistics[6845]: Unable to execute logrotate via: /opt/psa/logrotate/sbin/logrotate /opt/psa/etc/logrotate.conf -s /opt/psa/var/logrotate.status
on one of our Plesk-Servers (Plesk 12.0.18 Update 34 on Debian 7.6) the scheduled backup stopped working. Scheduled Backup is active in Backup-Manager, but it's not executed.
View 2 Replies View RelatedAutomatic Parallels Plesk. 12.0.18 has stopped working but no solution from plesk yet? I think every user has the same problem. Many people asked the same question but no solution/answer from plesk.
View 13 Replies View RelatedAfter Plesk panel upgrade to 12.x webadmin stopped working . It's showing following error
Code:
Server Error in '/' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. review the following URL and make sure that it is spelled correctly.
I am running Plesk 12 . Centos 6.5
I have Plesk Firewall Installed.
After the Plesk Firewall was enabled the FTP Stopped working in passive Mode.
I searched the net and found the following :
Code:
/etc/sysconfig/iptables-config and change the line with IPTABLES_MODULES to: IPTABLES_MODULES="ip_conntrack_ftp"
It started working.
I changed the default FTP port from proftpd.conf
Code:
port 2392
and /etc/services
Code:
ftp 2392/tcp
ftp 2392/udp fsp fspd
I allowed the new port in Plesk Firewall in Incoming connection and disabled port 21
Now I am not able to connect to the ftp, I get the following error. Have I missed anything ?
Code:
Response:257 "/" is the current directory
Command:TYPE I
Response:200 Type set to I
Command:PASV
Response:227 Entering Passive Mode (85,25,51,34,216,46).
Command:MLSD
Error:Connection timed out
Error:Failed to retrieve directory listing
I am getting this error after installing the AfterLogic WebMail Pro_7 app on a domain.
I removed the app but AfterLogic still appears in the list of available Webmail options. I am getting the error even after changing all my domains to use Roundcube.
backup_info_1406131330.xml:
Line 423 error: Element 'external-webmail': This element is not expected.
My backups since the day I installed that app are no longer valid.
I'm not been able to start plesk although web and mail services are running.I'm getting the error unable to execute php_handlers_control.I've patched and updated plesk with command line and bootstrap repair and I'm getting this errors:
==> Checking for: mail_responder_restore... fail
/usr/lib64/plesk-9.0/mail_restore: line 820: 17063 Illegal instruction /usr/local/psa//admin/sbin/mailmng-service --restart-service
Errors occured in mail restore procedure
Some utilities have exited with errors:
/usr/lib64/plesk-9.0/mail_auth_dump
/usr/lib64/plesk-9.0/mail_responder_restore
I get Illegal Instruction When I run :
# /usr/local/psa/admin/sbin/mailmng-service --restart-service
Illegal instruction
Also I switched from postfix to qmail and back using the command line with no luck.
/usr/local/psa/admin/bin/mailmng --features
runs without problems.....
/usr/local/psa/admin/logs/panel.log:
[06-Apr-2015 12:47:25 America/New_York] PleskUtilException: '/usr/local/psa/admin/bin/php_handlers_control' '--list-json' failed with code 4.
[code]....
I have problem:
1. Function mail(); not working
2. osCommerce e-mail error:
Code:
Gid 32157 is not permitted to relay mail, or has directly called /usr/sbin/exim instead of /usr/sbin/sendmail.
3. Fowarders working only on internal accounts e-mail
fowarder@mydomain.com --> email@mydomain.com - working
fowarder@mydomain.com --> my-emiail123@mail.pl - not working
This is VPS cPanel (OpenVZ) on my dedicated server.
I am trying to send mail using mail command with a subject using below.
mail -s "subject" me@domain.com or mail -s "subject" "me@domain.com"
Both are not working... It simple hangs for a long time. Nothing happens.
Then i tried sending mail using mail -v and then entered the subject, when it prompted.
It works fine.
I also tried mutt -s "test" -a
it also not working...
I have just changed servers and uploaded a mail() script which was working on my previous config but does not work on the new server config. What is stopping the emails from being delivered, is there something new in WHM that I need to do?
Here are my WHM and cPanel details:
WHM 11.11.0 cPanel 11.15.0-R18264
REDHAT 4 i686 on standard - WHM X v3.1.0
I set up a new account the other day and everything was set up as normal.
My client cannot recieve their emails through outlook express and I cannot open their cpanel thrugh their url.
I know I set everything up correct, and even deleted the account and created it again.
I am lost on this one, this has never happen to me before.