I run multiple domains/sites on my linux server. I know there is a php.ini files that comes with the php installation package. But I have heard that there is a way to create a local php.ini file for each domain.
Does anyone knows how to create local php.ini files for each domain. Is there a special setting i need to do to make it run?
in my rc.local i've got it so a program starts up automatically, this works when i restart my machine but the machine has also been crashing randomly (something which i haven't tracked down the source of yet) and when it goes up after this the program isn't started. Could this relate to my crashing problem or would it be something else that isn't configured right?
View 3 Replies View RelatedI am trying to source some pure HK Local bw
can anyone give me some contacts on who to speak to?
am now registered my domain with a local person who's name is ABT in india.. but their service was not good and am planning to change the hosting space to yahoo or other cheap web space provider... how to do it... whether the ABT peoples help with this part...
View 13 Replies View RelatedI have problem on eth1 for local IP. Eth0 is public IP behind Firewall, and eth1 is local IP for backup and for database. Every time eth1 is on, eth0 cannot be reached by ssh and http, although still can be pinged. Eth1 is also IPMI BMC port, and automatically got IP from DHCP LAN for web-based IPMI access, and the IPMI cannot be turned off. Motherboard is Tyan B7002.
View 2 Replies View Relatedhave only done static html sites in the past, but am ready to branch out and learn php and mysql. I have watched numerous video tutorials on php,mysql, dreamweaver cs3, and how they all work together.
I have followed all the steps on the tutorials and the website works great on my local testing server, but how in the world do I get it to work live on the internet! This is probably a very stupid question but I am at the point of not caring about looking stupid. I just want to know what Im missing/ doing wrong. The website is hosted with GoDaddy, (and the domain is registered with them as well).Am I supposed to have something set up there or a different server? I have tried using ftp to transfer all files over to the domain but when I visit the domain, the php pages do not work.
wasn't sure if this should go into "technical" or "programming" but I figure someone here will instantly be able to tell me...
(details: I'm on a shared host with cpanel and centos 3)
My hosting service techs refuse to update gnu TAR on the server even though it's several years old at 1.13 and has some know bugs that are annoying for complex calls - (basically the techs use any request like this to try to upsell me to dedicated or VPS which I don't need at my low level)
So I'd like to install a "local" copy of the newer gnu 1.14 or 1.15 TAR (which I *think* is possible?) into my account and have it run instead of the shared copy?
Unfortunately this is beyond my knowledge so thanks for any help in the right direction...
Okay, so here's the issue. I've been searching for a solution for about a week now, and just can't seem to find any information. The company that I work for had me switch their site live so I went through and changed the DNS information and pointed the A records to the new server running an online store. I waited and waited and waited for the propagation to finish so I could keep working on developing the site. I talked to our hosting company and they assured me that they were being pointed to the new server and there was no issue. I changed the DNS on my own computer to point to openDNS and I could see that it did in fact change.
We are now two weeks into the change and we can still not view the site from our network. I am in need of any ideas you can give me! If you ping the site with the default DNS server you receive the old IP Address but if you ping it with the openDNS IP in place, you receive the IP of the new server. I've gone through and run a /flushdns, /release, and /renew. I am working from a mac so advice geared towards this would be helpful however, I do have access to several machines running XP.
Again, the site has propagated across the internet, just not in our office.
I look forward to and appreciate any insight that you can offer with all of your eclectic wisdom.
I am really thinking of upgrade my dedi server, but since its from a IDE disk to a SATA, I can´t move the IDE to the new system.
Is there a way to backup the server disk to your
local computer? FTP ?
I have been working on an online shop locally from my machine, using Visual Web Developer and SQL server.
This is working fine, but now its at the stage were i need to show a client. In order to do this i need to upload it to our servers.
What i cant get my head round is the connection to the sql server, do i need to upload this too, or can i somehow point the connection string to the sql server sitting on my local machine...
Is it easier just to upload an sql server? how would i go about this?
I will have two servers (both centos), one is web server, the other one is database server. I would like to set the db server (mysql server) not accessed by the public internet, but web server only through an internal IP, like 10.x.x.x
How may I set them up? I'd appreciate a step by step tutorial. Because I am not a master of linux admin.
I have a client who needs a very special configuration. We are trying to find a data center or server provider in Switzerland who can only broadcast there ip in Switzerland only. So any attack or anyone trying to access that ip outside Switzerland will not get even close to it...
View 3 Replies View RelatedI have a script running on my server that has access via port 1031, but I would like to block access to it from the public, and instead allow access only through a php proxy script on my server which will connect to port 1031 via 127.0.0.1 (i.e. 127.0.0.1:1031)
So some may be thinking why? Currently users gain access by heading to mydomain.com:1031 . However I would now like to include adverts along side the script (but can't physically make adjustments to the script as the company that made the script has vanished of earth)
So the only way I can think of doing this, is by having the adverts in an Frame next to the proxy script.
So does opening up access via 127.0.0.1 just for this case, give me security problems?
I have a client that is using proboards.com and they are tired of all the ads / limitations. They want to migrate to their own copy of SMF but they have over 1000 users and tons of posts.
Does anyone know if you can migrate your data from proboards.com?
I have a problem with SSH. I can't login from outside the local network.
Software:
Centos 5.2 X86_64 + virtuozzo 4 (fresh install)
Already tried:
checking sshd_conf, everything is right
Checking nameservers and network setting (look fine)
Stopped iptables service
Problem:
Eth0 have IP xxx.xxx.xxx.xxx i can ping this ip over wan
Eth1 have a lan IP 192.168.0.10
Those two ips are listed in sshd_conf.
Ssh worked fine over lan/eth1. From a extern host i can ping the eth0 ip, but not ssh over that IP. (get a timeout)
Also new containers are pingable but ssh doesn’t work. (firewall off) Webinterfaces are working well.
Hope someone have a solution, this is pretty frustration i have search over 2 days for a solution, this must be a simple thing (i hope)
I try to enhance my server security and prevent local hack but it seem useless.
I tried to chmod home/user/public_html to 711; disable functions; enable php open_basedir.
I can stop some popular shell such as c99shell.php but server can be hacked local.
Anyway to prevent it completely?
From last 2 days I am trying to browse a website locally in FC6 but not getting any sign of success, this site is not live yet.
Website is access through IP but my some application need the website accessing with domain name.
Dns zone file is existed all services are running
What exactly I am missing..
I am trying to assist a customer install a Dolphin CMS but it returns some "open_basedir restriction in effect" on /usr/local/bin/php (it needs the path to the PHP binary).
If I put /usr/local/bin/php in httpd.conf -> php_admin_value open_basedir "..." it seems to work and it finds the required binary but...is this safe?
All the summers the same thing, problems from the locals ISPs affect us because some users can't connect to their websites. If they manually change the dns can do it, but someones don't want to understand it.
I want to ask you if you know any solution, or see any error in my dns configuration.
1. I setup the dns entry on the domain registration service like : ns*.domain.com
2. domain.com it's my main domain only for dns
3. then I setup the servers with ns15.domain.com for the main ip and the secondary ns16.domain.com for example with the next ip .
It's possible to setup more dns to prevent this? or setup dns in another servers? something like geographical dns? or configure servers to resolve from others dns?
I live in Australia and a lot of my websites get their base traffic from the United States; therefore I have a dedicated server in the United States.
In a few months I will be developing a website that is mainly for Australians. I'm wondering if it would be better to seek Australian hosting just for this site or just put it on my dedicated server in the U.S.
Personally I don't really notice the difference in load times between websites hosted in different countries but it may add up in the long run.
The reason I am leaning towards the U.S dedicated server option is that I have full control over the server. (i.e what php modules and extensions are loaded).
I utilized xammp to set up a local hosting enviroment on my desktop. It included Apahe, mysql and php. Apparently php support has not been properly installed on my web server.
How do I do that?
Just got a quotation from one of the local colo companies :-
[1] 1/4 rack with shared 10Mbps
[2] 1/4 rack with 256Kbps
I am interested to know what's the difference between [1] and [2]
I have a question if it is possible to use my local server as database storage and even some uploaded files. I am planning to host my website even in a shared hosting server provided that I could used my local server as data storage.
View 2 Replies View RelatedI'm getting a very weird problem that I can't seem to figure out after I upgraded from windows 2000 adv server to windows 2008 server.
The problem is whenever I try to visit my website (which is hosted on this server) some of the images will not load up ..
they will be X'ed (connection seems to terminated or timed out) .. all of the text, scripts seem to work ..
If I was to use the servers local IP Address indead of the Domain name / External IP .. everything comes up ..
Anyone got a idea what could cause connection issues via the Domain / EXT IP?
This has to be something new with windows 2008 --
Maybe something in Windows Firewall settings?
*Also note .. the problem only is happening here on my local network --
The server has Routing Enabled w/Nat --
All other websites work fine -
People outside of my local network can see my website with no issues - via the Domain ...
I'm planning a website at the moment but I'm wondering about a slight issue, regarding the local root folder of a website.
Currently, I'm using Dreamweaver to create a website and I have had no problems of uploading my files to a site through Dreamweaver before. But I will not have access to my computer for about one month every year. However, I have a laptop available during that month. But since my local root folder is located on my stationary computer it seems impossible for me to, in any way, use that laptop to manage my site (upload new files to the server).
I am running my own webserver and up untill now checked my sites on a second broadband connection. Due to an accident i can now only afford the one connection.
My question is, how can i view my sites using domain name or static ip (not local)
I am running windows server 2003
I saw a post mentioning host files but did not quite understand if that is what was deeded, I am assuming that i need to loopback somehow.
My router has no loopback
I have a local web server that I want to make available outside of my local network of two computers. I configured NAT at my router, configured the firewall. I Typed the external IP and got nothing, while I still was able to access my web server by typing "localhost", I tried both IIS and Apache, but what is interesting is that fact that the other people can access my web server via that external IP, I just cannot access it from my local network.
View 4 Replies View RelatedI have a web server running Server 2003 and IIS6. I can access everything fine via IP. Now I want to have a domain name work with it.
The server is in a .local domain environment. Does anyone have any info on how I should setup DNS for the web server if the domain itself is not getting any DNS info from the outside?
Is it just a matter of adding new A and NS records or do I need to be in a FQDN domain for it to work?
My server running and update CentOS 4.4. In the last hours lot of spam are being send form my server to the world. I'm unable to locate the source.
Sendmail is define to relay localhost, and it seems that the source is local!
It seem that all the email are send from apache@mydomain.com to user@mydomain.com
Sendmail is configure to accept for local delivery mail for domain mydomain.com
Here is trace of spam session:
Quote:
May 3 14:39:51 active sendmail[17696]: NOQUEUE: connect from mydomain.com [127.0.0.1]
May 3 14:39:51 active sendmail[17696]: AUTH: available mech=CRAM-MD5 DIGEST-MD5 PLAIN ANONYMOUS LOGIN, allowed mech=EXTERNAL GSSAPI KERBEROS_V4 DIGEST-MD5 CRAM-MD5
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: Milter: no active filter
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 220 mydomain.com ESMTP Sendmail 8.13.1/8.12.8; Thu, 3 May 2007 14:39:51 +0300
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: <-- EHLO mydomain.com
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-mydomain.com Hello mydomain.com [127.0.0.1], pleased to meet you
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-ENHANCEDSTATUSCODES
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-PIPELINING
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-8BITMIME
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-SIZE
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-DSN
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-ETRN
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-AUTH DIGEST-MD5 CRAM-MD5
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-DELIVERBY
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250 HELP
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: <-- MAIL From:<apache@mydomain.com> SIZE=133 AUTH=apache@mydomain.com
May 3 14:39:51 active sendmail[17696]: ruleset=trust_auth, arg1=apache@mydomain.com, relay=mydomain.com [127.0.0.1], reject=550 5.7.1 <apache@mydomain.com>... not authenticated
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250 2.1.0 <apache@mydomain.com>... Sender ok
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: <-- RCPT To:<reports@mydomain.com>
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250 2.1.5 <reports@mydomain.com>... Recipient ok
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: <-- DATA
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 354 Enter mail, end with "." on a line by itself
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: from=<apache@mydomain.com>, size=410, class=0, nrcpts=1, msgid=<200705031139.l43BdpDW017695@mydomain.com>, proto=ESMTP, daemon=MTA, relay=mydomain.com [127.0.0.1]
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250 2.0.0 l43Bdpg2017696 Message accepted for delivery
May 3 14:39:51 active sendmail[17696]: l43Bdpg3017696: <-- QUIT
May 3 14:39:51 active sendmail[17696]: l43Bdpg3017696: --- 221 2.0.0 mydomain.com closing connection
It seems the spam message BCC contain a lot of victims address, that not from mydomain.
Is some one connect form outside and spoof 127.0.0.1 ?
If it local process, ho do I locate it?
I scan /tmp and my web server root for suspicious file and didn't find nothing!
We send email from site throught exim
All is ok for hours.. after there is a error :
"451 Temporary local problem - please try later"
We have check our codes (php) more times but all is ok
If we restart exim error disappear and email go out.. for any hours.. after error return
Is there some kind of resource for finding local data centers? I've tried google and yell and no luck, either there's no data centers in Southampton UK or i'm blind
View 6 Replies View Related