I have a client who needs a very special configuration. We are trying to find a data center or server provider in Switzerland who can only broadcast there ip in Switzerland only. So any attack or anyone trying to access that ip outside Switzerland will not get even close to it...
View 3 RepliesAre there any sites that allow you to compare hosts / backbones in terms of peering?
Example:
Verio (NY) has peering agreements with:
Peer1
AT&T
etc, etc etc
Level3 (LDN) has peering agreements with:
NTL
BT
Demon
on a .eu hosting company with good routing/peering around europe. I have customers all over europe but still wanna save money and centralize to one hosting company.
I am looking for a gigabit uplink but nessesarily i dont need flatrate traffic since we only hit peaks a few times a day..
What are your thoughts on companies providing this kind of service at a fair price?
My colo is charging about $80/Mbit, they use InterNAP. Is that reasonable? This is in west coast/california.
That brings me to my other question, how do you know whats a good network? How is hurricane electric compared to InterNAP?
fixedorbit.com shows HE on the top 10 list and shows a lot of peering. I don't see InterNAP on that list at all! Does that mean thats it not as good?
The more peering, the better? (I guess we assume that the network provider isn't over selling and isn't cramming a lot of customers into a single port etc...)
How does peering work from the business angle? Say company X has bought a Gb port at an exchange, and wants to peer with other folks peering there. What are the folks typically going to expect from X before they'll peer with it? What are the
characteristics of X that would make folks willing/unwilling to peer? I've no idea what the relative importance of things would becontent (desirable, undesirable) WAN Network. (Does one have to have one?) technical cluefulnessBrand Qualities of the potential peer. It's hard to figure out the realpolitik of it all just by understanding the tech (BGP, etc.) and http://en.wikipedia.org/wiki/Peering .
Are there any co-location companies in California (preferably northern) that have a peering agreement directly with Comcast?
Not sure if it's peering or transit I should be asking about. Basically I'm trying to get the best path I can afford to Comcast customers in California.
I find it very interesting that the major ISPs in and around Portland Oregon apparently do not peer with anyone in the region. For low latency you're better off choosing a provider in Seattle or San Jose as traffic always seems to be routed there and back anyways.
Why is this? Is it simply not worth their effort to setup the peering connections because most traffic will be hosted outside the region anyways?
I just read this on their forums.Softlayer is pleased to announce that we have turned up a private 10G peer with Comcast in Dallas. This will bring our total capacity in Dallas to 70Gs.
Dallas, TX (dal01) - 70Gs
Verio - 20G (2x 10G)
Level3 - 10G
Savvis - 10G
Global Crossing - 10G
Internap - 10G
Comcast - 10G private peering Which other providers have this?
I run multiple domains/sites on my linux server. I know there is a php.ini files that comes with the php installation package. But I have heard that there is a way to create a local php.ini file for each domain.
Does anyone knows how to create local php.ini files for each domain. Is there a special setting i need to do to make it run?
in my rc.local i've got it so a program starts up automatically, this works when i restart my machine but the machine has also been crashing randomly (something which i haven't tracked down the source of yet) and when it goes up after this the program isn't started. Could this relate to my crashing problem or would it be something else that isn't configured right?
View 3 Replies View RelatedI am trying to source some pure HK Local bw
can anyone give me some contacts on who to speak to?
am now registered my domain with a local person who's name is ABT in india.. but their service was not good and am planning to change the hosting space to yahoo or other cheap web space provider... how to do it... whether the ABT peoples help with this part...
View 13 Replies View RelatedI have problem on eth1 for local IP. Eth0 is public IP behind Firewall, and eth1 is local IP for backup and for database. Every time eth1 is on, eth0 cannot be reached by ssh and http, although still can be pinged. Eth1 is also IPMI BMC port, and automatically got IP from DHCP LAN for web-based IPMI access, and the IPMI cannot be turned off. Motherboard is Tyan B7002.
View 2 Replies View Relatedhave only done static html sites in the past, but am ready to branch out and learn php and mysql. I have watched numerous video tutorials on php,mysql, dreamweaver cs3, and how they all work together.
I have followed all the steps on the tutorials and the website works great on my local testing server, but how in the world do I get it to work live on the internet! This is probably a very stupid question but I am at the point of not caring about looking stupid. I just want to know what Im missing/ doing wrong. The website is hosted with GoDaddy, (and the domain is registered with them as well).Am I supposed to have something set up there or a different server? I have tried using ftp to transfer all files over to the domain but when I visit the domain, the php pages do not work.
wasn't sure if this should go into "technical" or "programming" but I figure someone here will instantly be able to tell me...
(details: I'm on a shared host with cpanel and centos 3)
My hosting service techs refuse to update gnu TAR on the server even though it's several years old at 1.13 and has some know bugs that are annoying for complex calls - (basically the techs use any request like this to try to upsell me to dedicated or VPS which I don't need at my low level)
So I'd like to install a "local" copy of the newer gnu 1.14 or 1.15 TAR (which I *think* is possible?) into my account and have it run instead of the shared copy?
Unfortunately this is beyond my knowledge so thanks for any help in the right direction...
Okay, so here's the issue. I've been searching for a solution for about a week now, and just can't seem to find any information. The company that I work for had me switch their site live so I went through and changed the DNS information and pointed the A records to the new server running an online store. I waited and waited and waited for the propagation to finish so I could keep working on developing the site. I talked to our hosting company and they assured me that they were being pointed to the new server and there was no issue. I changed the DNS on my own computer to point to openDNS and I could see that it did in fact change.
We are now two weeks into the change and we can still not view the site from our network. I am in need of any ideas you can give me! If you ping the site with the default DNS server you receive the old IP Address but if you ping it with the openDNS IP in place, you receive the IP of the new server. I've gone through and run a /flushdns, /release, and /renew. I am working from a mac so advice geared towards this would be helpful however, I do have access to several machines running XP.
Again, the site has propagated across the internet, just not in our office.
I look forward to and appreciate any insight that you can offer with all of your eclectic wisdom.
I am really thinking of upgrade my dedi server, but since its from a IDE disk to a SATA, I can´t move the IDE to the new system.
Is there a way to backup the server disk to your
local computer? FTP ?
I have been working on an online shop locally from my machine, using Visual Web Developer and SQL server.
This is working fine, but now its at the stage were i need to show a client. In order to do this i need to upload it to our servers.
What i cant get my head round is the connection to the sql server, do i need to upload this too, or can i somehow point the connection string to the sql server sitting on my local machine...
Is it easier just to upload an sql server? how would i go about this?
I will have two servers (both centos), one is web server, the other one is database server. I would like to set the db server (mysql server) not accessed by the public internet, but web server only through an internal IP, like 10.x.x.x
How may I set them up? I'd appreciate a step by step tutorial. Because I am not a master of linux admin.
I have a script running on my server that has access via port 1031, but I would like to block access to it from the public, and instead allow access only through a php proxy script on my server which will connect to port 1031 via 127.0.0.1 (i.e. 127.0.0.1:1031)
So some may be thinking why? Currently users gain access by heading to mydomain.com:1031 . However I would now like to include adverts along side the script (but can't physically make adjustments to the script as the company that made the script has vanished of earth)
So the only way I can think of doing this, is by having the adverts in an Frame next to the proxy script.
So does opening up access via 127.0.0.1 just for this case, give me security problems?
I have a client that is using proboards.com and they are tired of all the ads / limitations. They want to migrate to their own copy of SMF but they have over 1000 users and tons of posts.
Does anyone know if you can migrate your data from proboards.com?
I have a problem with SSH. I can't login from outside the local network.
Software:
Centos 5.2 X86_64 + virtuozzo 4 (fresh install)
Already tried:
checking sshd_conf, everything is right
Checking nameservers and network setting (look fine)
Stopped iptables service
Problem:
Eth0 have IP xxx.xxx.xxx.xxx i can ping this ip over wan
Eth1 have a lan IP 192.168.0.10
Those two ips are listed in sshd_conf.
Ssh worked fine over lan/eth1. From a extern host i can ping the eth0 ip, but not ssh over that IP. (get a timeout)
Also new containers are pingable but ssh doesn’t work. (firewall off) Webinterfaces are working well.
Hope someone have a solution, this is pretty frustration i have search over 2 days for a solution, this must be a simple thing (i hope)
I try to enhance my server security and prevent local hack but it seem useless.
I tried to chmod home/user/public_html to 711; disable functions; enable php open_basedir.
I can stop some popular shell such as c99shell.php but server can be hacked local.
Anyway to prevent it completely?
From last 2 days I am trying to browse a website locally in FC6 but not getting any sign of success, this site is not live yet.
Website is access through IP but my some application need the website accessing with domain name.
Dns zone file is existed all services are running
What exactly I am missing..
I am trying to assist a customer install a Dolphin CMS but it returns some "open_basedir restriction in effect" on /usr/local/bin/php (it needs the path to the PHP binary).
If I put /usr/local/bin/php in httpd.conf -> php_admin_value open_basedir "..." it seems to work and it finds the required binary but...is this safe?
All the summers the same thing, problems from the locals ISPs affect us because some users can't connect to their websites. If they manually change the dns can do it, but someones don't want to understand it.
I want to ask you if you know any solution, or see any error in my dns configuration.
1. I setup the dns entry on the domain registration service like : ns*.domain.com
2. domain.com it's my main domain only for dns
3. then I setup the servers with ns15.domain.com for the main ip and the secondary ns16.domain.com for example with the next ip .
It's possible to setup more dns to prevent this? or setup dns in another servers? something like geographical dns? or configure servers to resolve from others dns?
I live in Australia and a lot of my websites get their base traffic from the United States; therefore I have a dedicated server in the United States.
In a few months I will be developing a website that is mainly for Australians. I'm wondering if it would be better to seek Australian hosting just for this site or just put it on my dedicated server in the U.S.
Personally I don't really notice the difference in load times between websites hosted in different countries but it may add up in the long run.
The reason I am leaning towards the U.S dedicated server option is that I have full control over the server. (i.e what php modules and extensions are loaded).
I utilized xammp to set up a local hosting enviroment on my desktop. It included Apahe, mysql and php. Apparently php support has not been properly installed on my web server.
How do I do that?
Just got a quotation from one of the local colo companies :-
[1] 1/4 rack with shared 10Mbps
[2] 1/4 rack with 256Kbps
I am interested to know what's the difference between [1] and [2]
I have a question if it is possible to use my local server as database storage and even some uploaded files. I am planning to host my website even in a shared hosting server provided that I could used my local server as data storage.
View 2 Replies View RelatedI'm getting a very weird problem that I can't seem to figure out after I upgraded from windows 2000 adv server to windows 2008 server.
The problem is whenever I try to visit my website (which is hosted on this server) some of the images will not load up ..
they will be X'ed (connection seems to terminated or timed out) .. all of the text, scripts seem to work ..
If I was to use the servers local IP Address indead of the Domain name / External IP .. everything comes up ..
Anyone got a idea what could cause connection issues via the Domain / EXT IP?
This has to be something new with windows 2008 --
Maybe something in Windows Firewall settings?
*Also note .. the problem only is happening here on my local network --
The server has Routing Enabled w/Nat --
All other websites work fine -
People outside of my local network can see my website with no issues - via the Domain ...