I have a dedicated server, but i dont know how i can measure the bandwidth at specific time, the problem that i feal that my bandwidth is below what i requested...
what i mean with Bandwidth is not trfic, it is the connection speed at a moment
(i.e. 50Mbps)
Can you conduct me to check the server speed by commands ( linux fedora )?
How to check connection speed of the server. i.e. 100 Mbps , 10 Mbps, etc.
I saw an message like this : " NIC Link is Up 10 Mbps Full Duplex", according to my knowledge, this is my server connection speed/ bandwidth is 10 Mbps, isn't it?
I need a backup server
main tasks
- Download/Upload files from/to my other servers very fast.
- 1 GBps Port
- Storage no more 250 GB .
- 600 GB Traffic
- access the server from the IP no domain
- Cheaper always better : )
What offers / recommendation do you have for me?
I have been working on this site only 1 hour so it is not finished. I just seem to be having really slow connection issues and want to verify this as my computer probably only has 1gb space left from the 300gb space I used so this could be causing the problem.
I recently swithced to HostGator.com Shared. I may need to go back to LunarPages.
Please visit the site below....
Home
Also, if you are encountering layout errors please let me know what internet browser and version you are using.
As you can tell from the name it will be a new site, community and help forum dealing with ecommerce and small business!
I have a client in the US who uses FTP server based in The Planet datacenter. He complains that since several days he experiences a way low connection speed (just 5 kbytes/s), while the speed to other FTP servers is at average 75 kbytes/s. So th eproblem seems to be with this particular server.
However, I tried the speed from Ukraine (where I'm based in). It is at the level of 100 kbytes/s.
I am using their RVPS-3 plan (30$/mo, 1024 MB RAM, 40 GB drive, 500GB BW) and I am pretty unhappy about the connection and response speeds of their servers - especially during traffic peaks in the US. The server is sometimes so slow that I have to wait 5-10 seconds for a simple HTML page to load. :/
However the hardware itself works fine and for the money is IMO a very good deal. Also tech support is fine, I've had 3 requests so far and all were solved almost immediately (<20 mins). Although during the setup stage they changed the OS WITHOUT letting me know due to installation of an admin panel. They quickly changed it back when I asked them, but it's pretty strange anyway.
It really is a pity that the connection speed is so bad, because other than that I couldn't say a bad word about them. Now I have to consider moving somewhere else...
a faster internet connection in our office here in San Diego, because we are going to run a few servers out of the office.
Currently we have DSL, but the upload speed inst cutting it, our current plan is:
Download: 1.5mbps
Upload: 512kbps
1 Dynamic IP
We are looking for something with the following:
Download: 1.5mbps or greater
Upload: 1.5mbps or greater
1 Static IP Address
Can anybody recommend any solutions in particular? Is t1 the only solution? We want to keep costs inline, and under $150 a month.
I have ftp server (pure-ftp). with firewall.
i allowed 20 and 21 port in "CSF" firewall
now when i or our client connect to the server connection done.
and the they fire dir or ls command they will receive error
"425 Could not open data connection to port 2535: Connection timed out"
what is the problem.i have already allowed passive port 2500:3500 then why i received this types of error
I am the server in my house and speed of communication server 2 MB per second Is this good speed Browsing
View 5 Replies View RelatedWhat is the best way to test the speed of a server?
CPU/processing wise, and not bandwidth wise?
I've two shared hosting accounts, one is hostgator and other is godaddy.
I've uploaded a file (.flv) on hostgator and same file on godaddy.
here a link to both
Hostgator flv
Goddady flv
Now i am use a Download manager " free download manager" to download files
The hostgator file downloads at 17-35kb/s
The godaddy file downloads at 200kb/s
I am using 2Mbps dsl.
Also my hostgator cpanel loads slow. and other files are downloads at very low max 40kb/s.
What are the issues. I've contacted hostgator support and they say that every thing is ok on their end.
I have to stream videos on hostgator but the speed is too slow. and it buffers alot.
What would be best method to test quality of server?For example,how site loads,do they load at all,speed of loading,etc.
What bothers me some of my site which i host on my servers start to lose traffic a lot lately.It could be beacuse of summer slowdown,but i simply cant belive in that.
Maybe server have a downtime or server have bad hardware router which doesnt accept all traffic.In shortly i belive something is wrong.So please tell me how do i do deep scan/check of all my servers.
[url]
This has happend before when server hit 4 mb/s i saw straight line on mrtg for 20 min.
I email the support but they said they do not cap anyone.
Anyway to check my server really isnt capped?
server is on 100 mbps port. Bandwidth not shared.
I want to know how the speed compares between a single X3320 against a server with duel E5310 in it?
I have been told they should be about the same, or is the newer single x3320 faster?
the speed of FTP access to the server is acceptable, if I surf the website on the server by ip address, the speed is also acceptable however, if I surf the website on the server by domain, the speed is really slow.
View 7 Replies View RelatedI have two servers one from hostmysite and other one is from 15minute server, I would like to know which one is faster, I have a dedicated server from 15minuteserver, but sometime I get slow speed I am not really sure which one is faster.
test two Ips and let me know.
76.12.21.39
216.118.117.165
way to test the speed of your web host? If the answer is ping, what is a good response time to look for?
View 7 Replies View Relatedwhich site can do that job? when i plan to buy a dedicated server,
i want to test speed like my customers worldwide.
since 2 month i have a linux gold webspace package from the hoster leaseweb.
The speed of my webspace is very slowly from time to time.
Are the server from leaseweb faster?
I've been asked to look for a offsite ftp server solution as an alternative to having one inhouse attached to a 20-100mbps leased line. It will be used for storing ISO images of DVD's from client sites, must have a fast connection, reliable and full security.
View 6 Replies View RelatedI have seen many articles about setting up your server. WAMP, LAMP, IIS and more. But they are based on software.
I want to know that What server hardware is required to setup a server? What type of internet connection is needed? What will be total cost?
I am from middle class family from india. I have airtel broadband 256 kbps dynamic IP unlimited plan for my daily use. Airtel provides business plans too with static IP address. You can check their tariff here:
airtelbroadband.in/wps/wcm/connect/airtel.in/Airtel.In/Home/ForYourBusiness/Data+and+Internet/Broadband+and+Internet/Tariff/
I want to know that if I want to host upto 10 websites with upto 20 lakh pageviews/month on a server...
which internet connection should I use?
what type of server hardware should I use?
what should be its configuration?
How can I set domain name on my webserver IP?
I am not going to host 10 sites on server. Even I am not going to setup a server.
I have never seen anybody talking about server hardware. They always talk about software (apache, php, iis, sql etc).
I want to know about server hardware and its configuration.
Can someone throw light, on how to check my Server's network speed?
I have uploaded a 200 MB dump and getting this result :
Quote:
# wget ******/dump.doc
HTTP request sent, awaiting response... 200 OK
Length: 231,816,431 [application/msword]
2% [> ]
4,984,776 1.15M/s ETA 03:22
1) How is this Dedicated Box, speed considered?
2) Any other way to test network speed?
I am planing to buy XLHOST dedicated server for my software project. Before buying this dedicated server I want to check it's standard server speed using following file. Please can anyone check download speed?[url]I will upload my file after getting satisfied with your test. Then I will post my dedicated server file link here to cross check download speed.
View 8 Replies View RelatedIm trying to limit the total amount of bandwidth my server can use, but I am unsure where to start.
Say for example I want to limit the total available upload bandwidth to 100kbit/s.
My host keeps telling me that it is my connection but my server keeps getting slower and slower. how can I actually test it?
View 3 Replies View RelatedI have a server with a overheating problem and a network problem.
(With a lot of users connecting to it every second)
Well, recently the server started to get slow then finally it was up on KVM but network connections do not work.
After reboot, it works for around 10+ hours but it won't last for a day as it gets slower then unconnectable.
When I look at the logs, I see this:
Mar 5 00:38:35 cn1 kernel: printk: 769 messages suppressed.
Mar 5 00:38:36 cn1 kernel: dst cache overflow
Mar 5 00:38:39 cn1 kernel: CPU0: Temperature above threshold
Mar 5 00:38:39 cn1 kernel: CPU1: Temperature above threshold
Mar 5 00:38:39 cn1 kernel: CPU1: Running in modulated clock mode
Mar 5 00:38:39 cn1 kernel: CPU0: Running in modulated clock mode
Mar 5 00:38:41 cn1 kernel: printk: 709 messages suppressed....
How can I detect port speed on my CentOS server ? I need to know it's 10Mbit/s or 100Mbit/s
View 6 Replies View Relatedi just buyed a dedicated server with 100mbps dedicated port..
how can i test the traffic on port to see is is realy working on 100mbps?
As per topic, what is the best method to do to the hardware to improve bandwidth / uplink speed of server?
I have a production server that is used for regular file serving.
P4 3.0Ghz
4GB RAM
500GB + 160GB + 160GB hard disk
2Mbps Dedicated + 10Mbps shared.
However, the most I can pulled through the whole server is always between 1.5Mbps - 3Mbps, anyway to pull the speed up to around 10Mbps should there be availability of bandwidth for me to burst?
For any informations, the hard disk is SATA 2.
I've got a CentOS 5 box that I want to cap/throttle the speed of the port to ensure that no more than 50 meg is passing in either direction at any given time.
- I know you can do this with FreeBSD using ipfw but that's not an option for me at the moment...
- I also know you can do this with some reasonably decent switching gear but again that's not an option. It's not my switch and they don't provide capped ports.
So, the question then becomes is there any way to lock the port down to 50 meg using only linux itself?
what is the best server hosting company that i can get speed from to the midle east --?
i have houge files that i want to store on my server and let people download them att maxemom speeds
so what is the best company that can do that?
xlhost?
powerserver?
or what?
