Harddrive (RAID10 8hdd) Failure
Jun 13, 2007
about a server of mine that went down recently. Its a RAID10- 8hdd setup and there seems to be a hdd that died (at least according to host) and the OS is not loading. I am a newbie to servers and am curious if data will be lost (which I hope not) and what procedures are taken in the event a drive fails in a RAID setup.
A couple more specific questions, based on notes from DC
- What if fsck is being run on the failed RAID drive?
- What happened if the OS doesnt load from raid10 (8 drives) anymore?
- One partition only showed up as 3mb large when knopix was run
I am still waiting from the support at the DC (been 4 days wait), so just wanted to get some insight from others who might have went thru a similar situation.
View 3 Replies
ADVERTISEMENT
Oct 11, 2006
I am confused between RAID10 and RAID0+1 by reading these two links
http://www.acnc.com/04_01_10.html
http://www.acnc.com/04_01_0_1.html
On RAID10 link, is that correct on rightside of picutre?
hm.. just confused between RAID10 and RAID0+1.. anyone has little more clear diagram between those two with good example?
View 4 Replies
View Related
Dec 21, 2007
My filesystm is damaged, I cannot make record in some files.
At users it is impossible to change passwords in WHM because at attempt of record in a file/etc/passwd there is a mistake - Error writing/etc/passwd: Read-only file system.
At attempt to activate shell access for an account in WHM:
===============
Shell Access Manager
Enabling shell access for user fotograf
Changing shell for fotograf.
Shell *NOT* changed. Try again later.
===============
Constantly there are the mistakes with write on a disk (/, /etc)
I EVERYDAY ran command in SSH:
===============
shutdown-rF now
===============
After that, all problems with file system are solved, but through some hours they again appear.
Attempt to create file in /
====================
Error writing tuning-primer.sh: Read-only file system
====================
FSCK solves my problems only at some hours.
Quote:
[root@*** unixbench-4.1.0-wht-1]# badblocks -vv /dev/hda
Checking blocks 0 to 78125000
Checking for bad blocks (read-only test): done
Pass completed, 0 bad blocks found.
I can ask to replace a hard disk, but whether it is necessary to do it? Whether it Requires replacement?
View 1 Replies
View Related
Feb 29, 2008
I a powerful cPanel server and I'm afraid of running out of I/O resources before the CPU and memory. So what do you think about having a different drive for MySQL DBs. Should this lower the risk of running out of I/O resources?
View 5 Replies
View Related
Jul 19, 2007
i failed to mount one harddrive taken from Red Hat to centos 5 server, the thing is that this drive is one of 2 drives in Raid 1
View 0 Replies
View Related
Jan 1, 2007
I have a FreeBSD system with cPanel on it, and the harddrive has failed.
It keeps saying there is an incorrect superblock, and it can't mount the drives.
Both the datacenter technicians and myself can't seem to get it to mount, and we need to recover the information. fsck fails, continiously.
The irony here is that the backup harddrive on the secondary server blew up a few weeks ago, and while I thought it was backing up to another account it apparently hasn't been.
View 4 Replies
View Related
May 15, 2007
I have a windows 2003 VPS and I'm not satisfied with the HD I/O speed, and before I mention what speeds I am getting I just want to see what people say should be plausible. I want to know if I am thinking I should get more out of the VPS then I really should.
Anyway, I used this program from ATTO to benchmark:
short-media.com/download.php?d=108
Called ATTO Disk Benchmark
If anyone is willing, run it on your VPS and post a screenshot. It's a standalone .exe, no install needed.
View 12 Replies
View Related
Jun 13, 2008
Tried to install xml::rss perl module in whm and go this:
Running make install
Installing /usr/lib/perl5/site_perl/5.8.5/XML/RSS.pm
Installing /usr/lib/perl5/site_perl/5.8.5/XML/RSS/Private/Output/Base.pm
Installing /usr/lib/perl5/site_perl/5.8.5/XML/RSS/Private/Output/V1_0.pm
Installing /usr/lib/perl5/site_perl/5.8.5/XML/RSS/Private/Output/V2_0.pm
Installing /usr/lib/perl5/site_perl/5.8.5/XML/RSS/Private/Output/V0_91.pm
Installing /usr/lib/perl5/site_perl/5.8.5/XML/RSS/Private/Output/V0_9.pm
Installing /usr/lib/perl5/site_perl/5.8.5/XML/RSS/Private/Output/Roles/ModulesElems.pm
Installing /usr/lib/perl5/site_perl/5.8.5/XML/RSS/Private/Output/Roles/ImageDims.pm
Installing /usr/share/man/man3/XML::RSS.3pm
Writing /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi/auto/XML/RSS/.packlist
Appending installation info to /usr/lib/perl5/5.8.5/i386-linux-thread-multi/perllocal.pod
/usr/bin/make install UNINST=1 -- OK
cPCPAN: Module (File::Spec) holdback (3.2701 held back to 3.25)
perlmod--Install done
Why is it installing to perl 5.8.5 when my perl version is 5.8.8?
root@server [~]# perl -v
This is perl, v5.8.8 built for i686-linux
View 1 Replies
View Related
Apr 28, 2009
I was hosted with these guys for well over 2 years, and was spending on average more than $2,000.00 a month for servers.
I had slowly grown to well over 10 boxes, and was definately on my way. then one day I get a spam complaint that one of my serves was casing complaints. So I checked it out, and asked for the complaints to be relayed so I would have record of it..... nothing.... I responded and even tried to call, but at that point they had sent me a tciket stating.
We have recieved well ofer 1000 spam complaints from a server you lease with us, per out TOS we are terminating ALL OF YOUR SERVERS, and you have 15 days to remove the data!
WOW... there was no ability to have them terminate that server, they simply said NO your account will be terminated (all of your servers) and you will be banned from The Planet!
When I tried to call they said your not allowed to speak with the abuse dept, again I tried contacting my account manager, and he said he checked into it and only saw a few complaints, and didn;t understand why they were doing this... In short I barely got moved over to another provideer before they shut me down completely..... They did however offer one course of action... you could turn your dedicated server clients over to us so they dont have to move! THEY ACTUALLY SAID THIS!
I at that point made the move and then they hit my credit card for another month well short of 20 days before a bill would even be due.. I had to file charges at the local courthouse to get this reversed.
My advice, if you host at the planet dont send mail. get another server provider for mail, these guys are *&^)(* and they don;t care about shutting you down no matter what you spend with them, on top of that they will try to scarf your clients up if they can, after they leave you high and dry....
Anyone else have issues like this with anyone else. I want to compile a list of providers that do business like this so I can avoid them.
View 14 Replies
View Related
Nov 4, 2009
Probably nothing new. Seriously, they're horrible and everyone here probably knows it. But... I'm ticked, so I'll add something extra to show how genius they are.
The problem is I can't seem to reach my website on godaddy. It appears as if the server is down. Both via the browser and ftp it fails.
Anyway, I could write a review but no need... I'll let the e-mail I sent them and their responses do the talking.
Okay, thanks for the information... I'm still humored that needing my pin is
actual security considering it's listed on your website after I login. My
password is way better security because it's never visible anywhere...
anyway... based on the information you gave me here's what I have found out..
The first instance of me not being able to reach the website was around noon
EST yesterday. Earlier that morning I was on the website and had logged in
via FTP. After noon the website was no longer reachable. This is a test from
one computer.
Around 6PM on a different network, the website was reachable from 3
different computers, including the one it wasn't reachable from earlier that
day. About 30 minutes later the website became unreachable again. Attempts
to reach it from all 3 machines failed.
This morning, I considered your response email and assuming the webserver is
up like you stated, I decided to try another network. The website was up on
that network. However, it is still down on the other two networks. It seems
that the website works for a limited time on each network before something
happens to keep the network from reaching the webserver.
Attempts at pinging the webserver all fail.
Doing a tracert to 2leet.com times out at the following: ....
View 14 Replies
View Related
Mar 18, 2008
so my server dies every day and requires human intervention to fully restart all service to have my site work properly. i suspect sigterm issues as it fails to restart all service as website is still down so i always have to reboot it.
Tried recompile apache with no success
[Tue Mar 18 06:51:27 2008] [error] [client 203.160.1.39] request failed: erroneous characters after protocol string: If-Modified-Since: Wed, 21 Nov 2007 06:16:52 GMT
[Tue Mar 18 10:03:18 2008] [error] Bad pid (7465) in scoreboard slot 16
[Tue Mar 18 10:03:18 2008] [error] Bad pid (27848) in scoreboard slot 17
[Tue Mar 18 10:03:18 2008] [error] Bad pid (27434) in scoreboard slot 18
[Tue Mar 18 10:03:18 2008] [error] Bad pid (30782) in scoreboard slot 19
[Tue Mar 18 10:03:18 2008] [error] Bad pid (7465) in scoreboard slot 16
[Tue Mar 18 10:03:18 2008] [error] Bad pid (27848) in scoreboard slot 17
[Tue Mar 18 10:03:18 2008] [error] Bad pid (27434) in scoreboard slot 18
[Tue Mar 18 10:03:18 2008] [error] Bad pid (30782) in scoreboard slot 19
[Tue Mar 18 10:03:18 2008] [error] Bad pid (7465) in scoreboard slot 16
[Tue Mar 18 10:03:18 2008] [error] Bad pid (27848) in scoreboard slot 17
[Tue Mar 18 10:03:18 2008] [error] Bad pid (27434) in scoreboard slot 18
[Tue Mar 18 10:03:18 2008] [error] Bad pid (30782) in scoreboard slot 19
[Tue Mar 18 10:03:18 2008] [notice] caught SIGTERM, shutting down
[Tue Mar 18 10:03:20 2008] [notice] mod_security/1.9.5 configured - Apache/1.3.39 (Unix) PHP/5.2.5
[Tue Mar 18 10:03:20 2008] [notice] Any You Like mod_ssl/2.8.30 OpenSSL/0.9.8g mod_perl/1.29 FrontPage/5.0.2.2510 configured -- resuming normal operations
[Tue Mar 18 10:03:20 2008] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Tue Mar 18 10:03:20 2008] [notice] Accept mutex: sysvsem (Default: sysvsem)
View 1 Replies
View Related
Jul 31, 2008
when using outlook, things are fine but mail() in php is acting up. I ran a dns report and here is what it said. could this be the problem? what should i do?
Domain mydomain.com has 2 mail-servers.
Checking mail server (PRI=10) mail.mydomain.com [208.70.160.19]
Mail server mail.mydomain.com[208.70.160.19] answers on port 25
<<< 220 mail.hsservers.com ESMTP
>>> HELO www.checkdns.net
<<< 250 mail.hsservers.com
>>> MAIL FROM: <dnscheck@uniplace.com>
<<< 250 ok
>>> RCPT TO: <postmaster@mydomain.com>
<<< 451 temporary failure (#4.3.0)
>>> RCPT TO: <root@mydomain.com>
<<< 451 temporary failure (#4.3.0)
>>> RCPT TO: <info@mydomain.com>
<<< 451 temporary failure (#4.3.0)
>>> RCPT TO: <webmaster@mydomain.com>
<<< 451 temporary failure (#4.3.0)
Probably mail server does not accept mail for mydomain.com (received status 451)
Checking mail server (PRI=30) mail2.mydomain.com [208.70.160.20]
Mail server mail2.mydomain.com[208.70.160.20] answers on port 25
<<< 220 mail2.hsservers.com ESMTP
>>> HELO www.checkdns.net
<<< 250 mail2.hsservers.com
>>> MAIL FROM: <dnscheck@uniplace.com>
<<< 250 ok
>>> RCPT TO: <postmaster@mydomain.com>
<<< 451 temporary failure (#4.3.0)
>>> RCPT TO: <root@mydomain.com>
<<< 451 temporary failure (#4.3.0)
>>> RCPT TO: <info@mydomain.com>
<<< 451 temporary failure (#4.3.0)
>>> RCPT TO: <webmaster@mydomain.com>
<<< 451 temporary failure (#4.3.0)
Probably mail server does not accept mail for mydomain.com (received status 451)
Some of your MX do not work properly
View 1 Replies
View Related
Nov 7, 2007
just a 4 drive raid 5 array go down, this is hardware based, controller indicates a 2 drive failure.
It is possible to rebuild this array from the 2 good drives?
Thing is that drives come up fine in test system when testing in spinrite which show no problems, though only 2 show partition structure others just come up as empty!
View 2 Replies
View Related
Jan 23, 2008
I have had sporadic mysql failures. Cpanel/WHM successfully restarts it and I am notified via e-mail and text message, but I have yet to be able to determine what is causing the failure. From what I can tell nothing is logged ether by cpanal, mysql or the system about the failure.
My questions is can cpanel or mysql be configured to log what the issue is?
I have the max connections for mysql and apached limited to match the servers capacity.
View 2 Replies
View Related
Apr 4, 2007
I had a server built and it is now at the data center. It is working great.
I have a Raid 10 question concerning what would happen if one of my hard drives failed.
I have a 3ware 9550SX card. If one of my drives fails and I install a new one with it automatically rebuild on it own?
Someone I know mentioned to me that I need IPMI, KVM override B for it to do this and that I would also have to have software installed fore this to work.
View 5 Replies
View Related
Sep 1, 2007
first we have, uname -a
Code:
Linux nsa.nullbytehosting.com 2.6.9-55.plus.c4 #1 Sun May 20 10:11:05 EDT 2007 i686 i686 i386 GNU/Linux
this is centos4.5 I believe.
and I have 5 ip addresses.
208.110.67.101 at eth0:0
208.110.67.114 at eth0:1
208.110.67.115 at eth0:2
208.110.67.116 at eth0:3
208.110.67.117 at eth0:4
my problem.
I cannot seem to get my dns working properly.
I am pointing my domain of nullbytehosting.com to ns1.nullbytehosting.com and ns2.nullbytehosting.com and of course , iuse godaddy, and ive configured that part properly.
Ive recently stopped using any control panel software, and started using ssh only.
I can access ns1 and ns2 . nullbytehosting.com just fine.
www. or just plain old nullbytehosting.com and its a no go.
allow me to show you my files.
/etc/resolv.conf
Code:
search nullbytehosting.com
nameserver 208.110.67.101
nameserver 208.110.67.114
/var/named/chroot/etc/named.conf
Code:
//
// named.conf for Red Hat caching-nameserver
//
include "/etc/rndc.key";
controls {
inet 127.0.0.1 allow { localhost; } keys { "rndckey"; };
};
options {
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
recursion no;
/*
* If there is a firewall between you and nameservers you want
* to talk to, you might need to uncomment the query-source
* directive below. Previous versions of BIND always asked
* questions using port 53, but BIND 8.1 uses an unprivileged
* port by default.
*/
query-source address * port 53;
multiple-cnames yes;
fetch-glue yes;
};
//
// a caching only nameserver config
//
controls {
inet 127.0.0.1 allow { localhost; } keys { rndckey; };
};
zone "." IN {
type hint;
file "/var/named/named.ca";
};
zone "localdomain" IN {
type master;
file "/var/named/localdomain.zone";
allow-update { none; };
};
zone "localhost" IN {
type master;
file "/var/named/localhost.zone";
allow-update { none; };
};
zone "0.0.127.in-addr.arpa" IN {
type master;
file "/var/named/named.local";
allow-update { none; };
};
zone "0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa" IN {
type master;
file "/var/named/named.ip6.local";
allow-update { none; };
};
zone "255.in-addr.arpa" IN {
type master;
file "/var/named/named.broadcast";
allow-update { none; };
};
zone "0.in-addr.arpa" IN {
type master;
file "/var/named/named.zero";
allow-update { none; };
};
zone "nsa.nullbytehosting.com" {
type master;
file "/var/named/nsa.nullbytehosting.com.db";
};
zone "nullbytehosting.com" {
type master;
file "/var/named/nullbytehosting.com.db";
};
zone "enigmagroup.org" {
type master;
file "/var/named/enigmagroup.org.db";
};
zone "2020code.com" {
type master;
file "/var/named/2020code.com.db";
};
zone "megansblog.info" {
type master;
file "/var/named/megansblog.info.db";
};
logging {
};
view test {
};
/var/named/nsa.nullbytehosting.com.db
Code:
$TTL 14400
@ 86400 IN SOA ns1.nullbytehosting.com. nullbytehosting.gmail.com. (
2007031502
86400
7200
3600000
86400
)
ns1.nullbytehosting.com. 14400 IN A 208.110.67.101
ns2.nullbytehosting.com. 14400 IN A 208.110.67.114
mail.nullbytehosting.com. 14400 IN A 208.110.67.101
nsa.nullbytehosting.com. 14400 IN A 208.110.67.101
ftp.nullbytehosting.com. 14400 IN A 208.110.67.101
www.nullbytehosting.com. 14400 IN CNAME nullbytehosting.com.
test.nullbytehosting.com. 14400 IN CNAME nullbytehosting.com.
nsa.nullbytehosting.com. 14400 IN MX 0 mail.nullbytehosting.com.
nsa.nullbytehosting.com. 14400 IN NS ns1.nullbytehosting.com.
nsa.nullbytehosting.com. 14400 IN NS ns2.nullbytehosting.com.
nsa.nullbytehosting.com. 14400 IN A 208.110.67.101
/var/named/nullbytehosting.com.db
Code:
$TTL 14400 nullbytehosting.com 14440 IN SOA ns1.nullbytehosting.com. psychomarine.gmail.com. (
2007031601
86400
7200
3600000
86400
)
ns1 14400 IN A 208.110.67.101
ns2 14400 IN A 208.110.67.114
mail 14400 IN A 208.110.67.101
ftp 14400 IN A 208.110.67.101
www 14400 IN CNAME nullbytehosting.com.
nullbytehosting.com. 14400 IN MX 0 mail.nullbytehosting.com.
nullbytehosting.com. 14400 IN NS ns1.nullbytehosting.com.
nullbytehosting.com. 14400 IN NS ns2.nullbytehosting.com.
nullbytehosting.com. 14400 IN A 208.110.67.101
/var/named/named.local
Code:
$TTL 86400
@ IN SOA localhost. root.localhost. (
1997022700 ; Serial
28800 ; Refresh
14400 ; Retry
3600000 ; Expire
86400 ) ; Minimum
IN NS localhost.
1 IN PTR localhost.
/var/named/named.zero
Code:
$TTL 86400
@ IN SOA localhost root (
42 ; serial (d. adams)
3H ; refresh
15M ; retry
1W ; expiry
1D ) ; minimum
IN NS localhost
/var/named/localdomain.zone
Code:
$TTL 86400
@ IN SOA localhost root (
42 ; serial (d. adams)
5M ; refresh
5M ; retry
1W ; expiry
1D ) ; minimum
IN NS localhost
localhost IN A 127.0.0.1
/var/named/named.broadcast
Code:
$TTL 86400
@ IN SOA localhost root (
42 ; serial (d. adams)
3H ; refresh
15M ; retry
1W ; expiry
1D ) ; minimum
IN NS localhost
and finally, here is a list of the files in the /var/named directory.
Code:
/slaves
/chroot
/data
named.broadcast
named.zero
localdomain.zone
named.ca
localhost.zone
named.ip6.local
named.local
nsa.nullbytehosting.com.db
nullbytehosting.com.db
can someone please inform me of why this isnt allowing me to see nullbytehosting.com www.nullbytehosting.com or any sites I point to ns1.nullbytehosting.com or ns2.nullbytehosting.com
clearly accessing
ns1.nullbytehosting.com
ns2.nullbytehosting.com
shows the default page I intend to see, however
nullbytehosting.com
www.nullbytehosting.com
or anyhting like that doesnt exist.
A lookup on the dns tools website, shows alot of errors , that google isnt much help with. everyone has their own way, and none seem to put it all together and work properly.
View 5 Replies
View Related
Oct 19, 2007
How long it takes to rebuild RAID5 if one of failed disks was replaced? How long it takes to assume full performance again?
Our support changed disk in our server 2h ago, but it's still extremely slow
View 8 Replies
View Related
Oct 18, 2006
Anyone have issues where after setting up cpanel dns cluster via whm, cpanel fails often on the clustered boxes?
View 2 Replies
View Related
Apr 19, 2009
I just received:
[cPanel smartcheck] Possible Hard Drive Failure Soon
ATA Error Count: 1512 (device log contains only the most recent five errors)
Error 1512 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours)
Error 1511 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours)
Error 1510 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours)
Error 1509 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours)
Error 1508 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours)
----END /dev/sda--
What do you advice me to do? ask the DC to change the Hard Drive or wait till damaged?
I already have a weekly external Backup.
View 14 Replies
View Related
Nov 3, 2009
I am facing problems with 4 of my servers
They cannot resolved hostname DNS
For example
[root@rbi0403 ~]# ping www.google.com
ping: unknown host www.google.com
[root@rbi0403 ~]#
[root@rbi0407 ~]# ping www.google.com
[root@rbi0407 ~]# traceroute www.google.com
www.google.com: Temporary failure in name resolution
[root@rbi0407 ~]#
[root@rbi0407 ~]# traceroute 209.85.129.147
traceroute to 209.85.129.147 (209.85.129.147), 30 hops max, 40 byte packets
Unable to look up 91.194.90.1: Temporary failure in name resolution
1 91.194.90.1 0.219 ms 1.270 ms 0.197 ms
Unable to look up 93.104.204.33: Temporary failure in name resolution
2 93.104.204.33 0.722 ms 1.703 ms 0.666 ms
Unable to look up 212.18.6.110: Temporary failure in name resolution
3 212.18.6.110 0.637 ms 0.657 ms 1.110 ms
Unable to look up 194.59.190.61: Temporary failure in name resolution
4 194.59.190.61 70.601 ms 69.473 ms 62.710 ms
Unable to look up 66.249.94.86: Temporary failure in name resolution
Unable to look up 66.249.94.88: Temporary failure in name resolution
5 66.249.94.86 2.048 ms 1.984 ms 66.249.94.88 0.705 ms
Unable to look up 209.85.248.249: Temporary failure in name resolution
Unable to look up 72.14.233.107: Temporary failure in name resolution
6 209.85.248.249 9.087 ms 72.14.233.107 9.363 ms 9.954 ms
Unable to look up 72.14.232.203: Temporary failure in name resolution
Unable to look up 72.14.232.165: Temporary failure in name resolution
7 72.14.232.203 8.672 ms 8.370 ms 72.14.232.165 10.434 ms
Unable to look up 72.14.239.170: Temporary failure in name resolution
Unable to look up 72.14.233.210: Temporary failure in name resolution
8 72.14.239.170 14.446 ms 72.14.233.210 12.574 ms 9.609 ms
Unable to look up 209.85.129.147: Temporary failure in name resolution
9 209.85.129.147 10.858 ms 10.048 ms 11.172 ms
[root@rbi0405 ~]# traceroute www.google.com
www.google.com: Temporary failure in name resolution
[root@rbi0405 ~]#
[root@rbi0381 ~]# ping www.google.com
ping: unknown host www.google.com
[root@rbi0381 ~]#
The DNS ip still can be ping if i changed the hostname into numeric ip address
root@rbi0407 ~]# ping 209.85.129.147
PING 209.85.129.147 (209.85.129.147) 56(84) bytes of data.
64 bytes from 209.85.129.147: icmp_seq=1 ttl=55 time=9.56 ms
64 bytes from 209.85.129.147: icmp_seq=2 ttl=55 time=10.7 ms
64 bytes from 209.85.129.147: icmp_seq=3 ttl=55 time=9.79 ms
64 bytes from 209.85.129.147: icmp_seq=4 ttl=55 time=8.05 ms
--- 209.85.129.147 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2999ms
rtt min/avg/max/mdev = 8.055/9.541/10.752/0.966 ms
[root@rbi0407 ~]#
However one of my server and still working on nicely with no problems
[root@rbi0419 ~]# ping www.google.com
PING www.l.google.com (209.85.129.103) 56(84) bytes of data.
64 bytes from fk-in-f103.1e100.net (209.85.129.103): icmp_seq=1 ttl=55 time=8.26 ms
64 bytes from fk-in-f103.1e100.net (209.85.129.103): icmp_seq=2 ttl=55 time=9.48 ms
64 bytes from fk-in-f103.1e100.net (209.85.129.103): icmp_seq=3 ttl=55 time=8.05 ms
--- www.l.google.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1999ms
rtt min/avg/max/mdev = 8.059/8.600/9.480/0.632 ms
[root@rbi0419 ~]# traceroute www.google.com
traceroute to www.google.com (209.85.129.147), 30 hops max, 40 byte packets
1 gw.giga-dns.com (91.194.90.1) 0.323 ms 0.330 ms 0.396 ms
2 host-93-104-204-33.customer.m-online.net (93.104.204.33) 0.692 ms 0.789 ms 0.887 ms
3 ge-1-3-0.rt-inxs.m-online.net (212.18.6.110) 0.756 ms 0.830 ms 0.892 ms
4 inxs.google.com (194.59.190.61) 0.734 ms 0.746 ms 0.777 ms
5 66.249.94.88 (66.249.94.88) 0.740 ms 0.769 ms 0.663 ms
6 209.85.248.249 (209.85.248.249) 8.029 ms 7.998 ms 8.144 ms
7 72.14.232.201 (72.14.232.201) 20.406 ms 20.459 ms 20.498 ms
8 72.14.239.170 (72.14.239.170) 9.985 ms 72.14.233.210 (72.14.233.210) 9.721 ms 9.712 ms
9 fk-in-f147.1e100.net (209.85.129.147) 9.556 ms 9.277 ms 8.074 ms
[root@rbi0419 ~]#
Anyway ticket has been issued to them and still waiting for reply.
Just curious if anybody else face the same problems as i didn't not play around with my DNS servers at all.
View 6 Replies
View Related
May 13, 2008
I have a server with CentOS Enterpise 4.6 using 2.6.9-67ELsmp Kernel
I found that I must update the kernel for security reasons !! so I updated it to 2.6.25.3 ( leatest stable version )
I updated it 2 times but always fail in this server
View 6 Replies
View Related
Apr 2, 2008
I am writing this message to share with fellow readers my sincere dissatisfaction and utter disappointment with the low standards and non-performance of customer service at 1&1.com. The following message is a copy of a feedback e-mail that I sent to 1&1 management after cancelling my Dedicated Server. I was a customer since 2005.
----
Dear Sir or Madam:
I am writing to provide you with feedback on my experience with 1&1, and the events and circumstances that led me to cancel my Dedicated Server Package (a "1&1 Managed Server III"). I have been a customer since 2005, and over the course of these past few years, have witnessed the gradual degradation of service, transparency, and accountability by 1&1 customer service and technical support staff.
I purchased a Managed Server because I wanted support personnel to administer my system, so that my business team and I could focus on building and developing content. We design and launch web sites and interactive communities focused around creative topics, and our sites are ultimately very successful and highly active. Upgrades of our server's operating system were often done reactively and late, rather than proactively and positively, at times exposing our server to security holes and performance inefficiencies. However, my real disappointment rests with how your customer service has been managed.
Over the past year, there were complete server outages that lasted several hours at a stretch. When I was aware of these, I would call the 1&1 Customer Service line, via the "dedicated server" 1-800 number that your company had established. What I received was an outsourced call center in India, with absolutely no ability to perform technical or quality maintenance on my server. The customer service representatives were marginally understandable through their thick accents, and were very clearly reading from a script. Their inability to think creatively and adapt solutions to the problems at hand is understandable, even if frustrating; but entirely unacceptable is the fact that, by their own admission on several calls over the past few months, the data center in the United States was unstaffed. Ordinarily, Tier-1 customer service escalates to live Tier-2 and Tier-3 technicians and admins; your customer service department, however, was left lodging help desk tickets into a system that, according to them, would not be checked in days.
In the latest episode, my dedicated server went offline on Friday night. Saturday morning, I was on the phone with your customer service personnel, who told me that the U.S. data center where my server was located was unstaffed on weekends and admins might not be able to get to my issue until Monday morning. They repeatedly offered insulting "scripted" suggestions as to why my server was offline ("perhaps it was my Internet Service Provider?", for example). Finally, they concluded that there was nothing that they could do - not even a remote-reboot, which is now standard in the industry (such as an APC-reboot). All in all, my server was offline for over 20 hours without explanation, with no clear accountability, and with zero communication. When I kept calling, demanding escalation, I finally got through to an admin in the United States, who managed to remote-force-reboot my machine. After I conversed with him briefly, he simply said he did not know why my server went offline.
Our Dedicated Server's system specifications were modest, but still competitive (a Pentium 4, 2 Gigs of RAM machine, with around 500 concurrent MySQL connections on a single site). Our site's system specifications, using out-of-the-box software that we licensed to run our site, should easily have supported thousands of concurrent connections before we needed to upgrade our system. Nevertheless, I specifically paid extra and purchased 1&1's "managed dedicated server" option because I wanted the extra care and attention to our business-critical web sites.
FEEDBACK ITEMS:
To improve upon your business, I recommend three immediate changes.
1. Train Your Customer Service Personnel.
Your Indian/Outsourced customer service appeared generally unfamiliar with both my package (they had to escalate several times, placing me on hold for over 20 minutes at a stretch, before they could conclude that I had a dedicated and managed server), and had been reading from an outdated script that left them uninformed and incompetent to handle even basic queries on system status, server and service readiness, and the functionality of my server. Furthermore, they were completely unsupported by not having any live technical team working during reasonable hours.
2. Staff your U.S. Data Center.
It is astonishing, and horrifying, to me that 1&1 is apparently selling any hosting services, much less dedicated/managed hosting services, on a data center that is apparently not staffed with technicians 24 hours a day, 7 days a week. In my situation, my business-critical server went offline for nearly 24 hours, and there was no one that either I, or your Outsourced/Indian Tier-1 customer support could escalate to in order to get accountability. Furthermore, there was no transparency: there is no number to reach a live human being on-site at the data center, and your Customer Service personnel seemed either unable or unwilling to ask questions to figure out if anyone was in charge on the ground. They concluded to me, on the phone, that the "technicians were home for the weekend". That is entirely unacceptable, and it operates on a level of non-performance that is shocking to me as both a business executive and an organizational manager.
3. Provide full-time, English-speaking, U.S.-based Customer Service.
Your call center in India was staffed with people who, quite frankly, were neither qualified nor competent to handle the concerns of your United States and European customers. When asked questions that deviated from the script that they were reading (you could hear them both typing and flipping pages to try and find the answer), they ended up placing me on hold for long stretches of time. There is zero innovation, and absolutely no adaptability by your customer service at this call center. When this scenario unfolds, there absolutely must be an immediate, Tier-2 customer service personnel that can promptly, professionally, and courteously handle the concerns of your customers, and they should do so in an intelligent, dynamic, innovative fashion. I am extremely patient and forgiving of outsourced and offshore technical solutions, especially since my business leverages a global model similar to most information technology consultancies. I can only imagine the number of clients that your user-unfriendly, backward, and mentally-atrophied customer representatives have cost you. The fact that they are the only customer support you offer before escalation to a (non-existent or absent) technical team is unacceptable, and speaks of a systematic failure in your organizational management and escalation hierarchy structure. Please, for the sake of your future customers, provide a full-time, intelligent, responsive, and communicative U.S.-based customer service team.
CONCLUSION
In closing, I want to reiterate my sadness at having come to the decision to cancel my 1&1 account and close all of my business with your organization. I have been a customer for nearly three years with your company, and have been very patient and understanding of the delays and mismanagement with customer service, especially since it seemed that in previous years, you had an attentive and present technical support team that would resolve matters promptly. However, after the past few months, I have witnessed the apparent absence of any service level agreement to respond to issues, queries, or escalations, the complete incompetence and mismanagement at your outsourced and offshore Indian call-center, and gross non-performance of your technical personnel and utter negligence of your support staff on the data center. Within a matter of moments, I was able to identify a major and large-scale competitor of yours that offered me an enterprise server solution at a U.S.-based data center that was staffed 24 hours a day, 7 days a week; a full-time U.S.-based customer service team that had guaranteed SLA's of responsiveness; and, professional management services for a comprehensive management solution -- all of this at a cost less than what you currently charge new customers.
The decision was one of the easiest ones I have ever made.
View 11 Replies
View Related
Jan 12, 2008
I am getting this error on my mail from cpanel
S.M.A.R.T Errors on /dev/sda
From Command: /usr/sbin/smartctl -q errorsonly -H -l selftest -l error /dev/sda
Please note the following marginal Attributes:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
190 Unknown_Attribute 0x0022 050 039 045 Old_age Always In_the_past 890961970
----END /dev/sda--
Is it a big issue.. whats the solution for it?
View 1 Replies
View Related
Sep 6, 2008
so this is the second time I got an email like this from my server:
This email was generated by the smartd daemon running on:
host name: xxxxxxxxxxxxxxxxxxxx
DNS domain: xxxxxxxxxxxxxxxxxxx
NIS domain: (none)
The following warning/error was logged by the smartd daemon:
Device: /dev/sdb, 6 Offline uncorrectable sectors
For details see host's SYSLOG (default: /var/log/messages).
You can also use the smartctl utility for further investigation.
No additional email messages about this problem will be sent.
What can I do about this?
I actually COLO a box.. I sent them the server NEW, and the drive failed a week after I sent them a new one. This SECOND drive is now having errors apparently.. what can I tell my tech to do about this? Please advise me on what I can do.. (There is a chance that this could be my primary drive)
I asked FDC to check the controller and drive, and they said there was nothing they could do.
View 14 Replies
View Related
Dec 1, 2007
Let me start by saying that we use redundant power supplies for all of our core service nodes, however I am wondering about the failure rate others have experienced.
I have been in the industry for nearly 4 years now, and have yet to see a power supply failure, so I'm considering just going with single power supplies instead of redundant.
View 14 Replies
View Related
Jun 5, 2007
My VPS is setup and now when I did a dnsreport for my site, it shows:
Number of nameservers
ERROR: You have 2 nameservers, but both are on the same IP! This is not a valid setup. You are required to have at least 2 nameservers, per RFC 1035 section 2.2.
Is this a big problem?
The report [url] also shows other failures. Are there any critical ones that I need to take care of? How do I do it?
View 11 Replies
View Related
Aug 3, 2007
I'm currently hosted on a VPS server with Galaxy Solutions, but just last night I was informed of a hard drive failure.
This morning they said the DC couldn't recover the data, and now they are trying to recover the data themselves. Right now I'm assuming that if the DC can't recover it, then there isn't much of a chance of it being recovered at all.
I've put in countless hours and dedicated so much of my time to my sites, something which certainly cannot be compensated for. I would like to exhaust any possible way to recover the data.
Can anyone recommend what I should do in a situation like this? Would it be advisable to consult a data recovery specialist? It would be great if you could also recommend one.
The cost doesn't matter. I'm extremely frustrated, annoyed, and confused because of all this. Just like that, all my work is gone.
I did have backups, but they were on the same server.
View 14 Replies
View Related
Apr 22, 2007
I have a server like this:
WHM 10.8.0 cPanel 10.9.0-S9966
CentOS 3.8 i686 - WHM X v3.1.0
My cron files are like this: var/spool/cron/
Quote:
33 4 * * * /scripts/upcp
0 1 * * * /scripts/cpbackup
*/15 * * * * /usr/local/cpanel/whostmgr/bin/dnsqueue > /dev/null 2>&1
2,58 * * * * /usr/local/bandmin/bandmin
24 5 * * * /usr/local/cpanel/whostmgr/docroot/cgi/cpaddons_report.pl --notify
0 0 * * * /usr/local/bandmin/ipaddrmap
0 */1 * * * /usr/local/nobody_check/nobody_check >/dev/null 2>&1
0 6 * * * /scripts/exim_tidydb > /dev/null 2>&1
*/5 * * * * perl /root/rvadmin/rvmultiupdate.pl >/dev/null 2>&1
14 6 * * * perl /root/rvadmin/auto_rvskin.pl
*/5 * * * * /usr/local/cpanel/bin/dcpumon >/dev/null 2>&1
But e-mails like tha is coming to me
Quote:
Cron <root@mavi> /usr/local/cpanel/bin/dcpumon >/dev/null 2>&1
/bin/sh: line 1: 1
: ambiguous redirect
Quote:
Cron <root@mavi> perl /root/rvadmin/rvmultiupdate.pl >/dev/null 2>&1
/bin/sh: line 1: 1
: ambiguous redirect
View 1 Replies
View Related
Jul 2, 2007
I have a weird Issue with my Qmail program. It happened when I separated webmaster@domain, postmaster@domain, and admin@domain into separate e-mail accounts, instead of having them as aliases of each other. Now the standard server and anti-virus automated e-mails all get bounced, and the bounce messages are overwhelming my admin account.
Also randomly some important messages from approved senders also get bounced and end up in there, but with the sheer quantity of messages (100s per day) I have no way of going through and filtering them out. All spam get's failure notice's, but that's how it should be.
I'm a web designer, not a webmaster, but I ended up in charge of this and can't figure out how to fix it. Some insight into the possible cause would be much appreciated.
Here's a sample e-mail:
Quote:
Hi. This is the qmail-send program at domain.com.
I tried to deliver a bounce message to this address, but the bounce bounced!
<anonymous@domain.com>:
The address you used is not a vaild e-mail address at Domain. If you believe this is an error send an e-mail to admin@domain.com
--- Below this line is the original bounce.
Return-Path: <>
Received: (qmail 32529 invoked for bounce); 2 Jul 2007 05:30:22 -0400
Date: 2 Jul 2007 05:30:22 -0400
From: MAILER-DAEMON@domain.com
To: anonymous@domain.com
Subject: failure notice
Hi. This is the qmail-send program at deltascanlaboratories.com.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work out.
<drweb@domain.com>:
The address you used is not a vaild e-mail address at Domain. If you believe this is an error send an e-mail to admin@domain.com
--- Below this line is a copy of the message.
Return-Path: <anonymous@domain.com>
Received: (qmail 32519 invoked by uid 111); 2 Jul 2007 05:30:21 -0400
Date: 2 Jul 2007 05:30:21 -0400
Message-ID: <20070702093021.32516.qmail@domain.com>
From: root@domain.com (Cron Daemon)
To: drweb@domain.com
Subject: Cron <drweb@localhost> /opt/drweb/update.pl
X-Cron-Env: <SHELL=/bin/sh>
X-Cron-Env: <HOME=/var/drweb>
X-Cron-Env: <PATH=/usr/bin:/bin>
X-Cron-Env: <LOGNAME=drweb>
X-Cron-Env: <USER=drweb>
Dr.Web (R) update details:
Update server: http://update.msk3.drweb.com/unix/433/433
Update has began at Mon Jul 2 05:30:05 2007
Update has finished at Mon Jul 2 05:30:21 2007
Following files had been updated:
/var/drweb/bases/dwntoday.vdb
/var/drweb/updates/drwtoday.txt
/var/drweb/updates/dwntoday.txt
/var/drweb/bases/drwtoday.vdb
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.476 / Virus Database: 269.9.14/883 - Release Date: 7/1/2007 12:19 PM
View 0 Replies
View Related
Apr 2, 2007
We've migrated our WHM/CPanel server over to a new set of IP's and for some reason I can't connect to them without using a public proxy, this even includes the providers website now. I can't figure out exactly who is responsible and where the point of failure is exactly...
Traceroute/ping from my home location to the old server (which works)...
---
traceroute to 85.17.13.20 (85.17.13.20), 64 hops max, 40 byte packets
1 192.168.0.1 (192.168.0.1) 1.303 ms 0.872 ms 0.302 ms
2 10.209.128.1 (10.209.128.1) 10.084 ms 8.325 ms 12.404 ms
3 s10-2.cr01-knwk.wa.charter.com (68.186.73.13) 9.361 ms 28.299 ms 10.369 ms
4 68.186.73.49 (68.186.73.49) 19.083 ms 25.163 ms 9.095 ms
5 12.127.79.29 (12.127.79.29) 15.992 ms 30.138 ms 13.872 ms
6 12.127.6.30 (12.127.6.30) 39.046 ms 60.329 ms 23.623 ms
7 12.122.86.45 (12.122.86.45) 14.747 ms 24.446 ms 34.399 ms
8 br1-a350s5.attga.ip.att.net (192.205.33.238) 25.601 ms 21.799 ms 37.404 ms
9 te2-1-10g.ar2.ams1.gblx.net (67.17.92.153) 170.920 ms 170.827 ms 171.122 ms
10 64.213.76.150 (64.213.76.150) 170.045 ms 169.986 ms 175.025 ms
11 62.212.95.146 (62.212.95.146) 178.002 ms 178.664 ms 177.936 ms
12 novosibirsk.v-unix.sbp.attikh.net (85.17.9.244) 182.034 ms 178.866 ms 179.335 ms
13 rakebacknation.com (85.17.13.20) 179.246 ms 181.997 ms 189.018 ms
---
Ping has started ...
PING 85.17.13.20 (85.17.13.20): 56 data bytes
64 bytes from 85.17.13.20: icmp_seq=0 ttl=48 time=178.690 ms
--- 85.17.13.20 ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max/stddev = 178.690/178.690/178.690/0.000 ms
---
Traceroute/ping from my home location to the new server (which fails)...
---
traceroute to 77.235.37.113 (77.235.37.113), 64 hops max, 40 byte packets
1 192.168.0.1 (192.168.0.1) 7.087 ms 0.303 ms 0.203 ms
2 10.209.128.1 (10.209.128.1) 18.712 ms 38.402 ms 11.605 ms
3 s10-2.cr01-knwk.wa.charter.com (68.186.73.13) 33.955 ms 41.386 ms 13.996 ms
4 68.186.73.49 (68.186.73.49) 26.398 ms 13.656 ms 20.702 ms
5 12.127.79.29 (12.127.79.29) 12.477 ms 28.289 ms 20.980 ms
6 12.127.6.30 (12.127.6.30) 27.392 ms 19.994 ms 17.067 ms
7 12.127.6.61 (12.127.6.61) 23.416 ms 15.131 ms 14.724 ms
8 192.205.33.114 (192.205.33.114) 21.345 ms 15.118 ms 16.140 ms
9 so-0-0-0.cr2.sea1.us.above.net (64.125.28.186) 16.115 ms 29.307 ms 17.559 ms
10 so-2-0-0.cr2.ord2.us.above.net (64.125.30.222) 72.402 ms 70.323 ms 75.338 ms
11 so-1-1-0.mpr2.lga5.us.above.net (64.125.27.34) 88.384 ms 88.768 ms 88.345 ms
12 so-0-0-0.mpr1.lga5.us.above.net (64.125.27.237) 94.959 ms 86.645 ms 90.357 ms
13 so-7-0-0.mpr3.ams1.nl.above.net (64.125.27.186) 172.967 ms 207.672 ms 201.681 ms
14 ge1-1.sr1.esy.nl.leaseweb.net (82.98.247.34) 169.246 ms 166.772 ms 166.667 ms
15 * * *
16 * * *
17 * * *
//
64 * * *
---
Ping has started ...
PING 77.235.37.113 (77.235.37.113): 56 data bytes
--- 77.235.37.113 ping statistics ---
1 packets transmitted, 0 packets received, 100% packet loss
---
Traceroute/ping from dnsstuff to the old server (which works)...
---
HopT1T2T3BestGraphIPHostnameDistTTLCtryTime
19111.3 ms
66.36.240.2 AS14361
HOPONE-DCA c-vl102-d1.acc.dca2.hopone.net. 255USUnix: 20:35:48. 71
26151.3 ms [+0ms]
66.36.224.232 AS0
IANA-RSVD-0 gec2.core1.dca2.hopone.net. 0 miles [+0]254USUnix: 21:35:29. 17
312211.3 ms [+0ms]
66.36.224.18 AS0
IANA-RSVD-0 ge3-0.core1.iad1.hopone.net. 0 miles [+0]253USUnix: 20:37:31.545
41211.7 ms [+0ms]
206.223.115.86 AS2914
NTTA-2914 ge-4-1-0.mpr1.iad10.us.mfnx.net. 0 miles [+0]251USUnix: 20:35:08.131
51231.9 ms [+0ms]
64.125.30.118 AS6461
MFNX so-4-0-0.mpr1.iad2.us.above.net. 0 miles [+0]250USUnix: 20:35:08.163
64222.4 ms [+0ms]
64.125.27.74 AS6461
MFNX so-6-0-0.mpr1.iad5.us.above.net. 0 miles [+0]249USUnix: 20:35:08.195
72242.5 ms [+0ms]
64.125.29.229 AS6461
MFNX so-4-0-0.mpr1.iad1.us.above.net. 0 miles [+0]248USUnix: 20:35:08.227
83333.0 ms [+0ms]
64.125.28.125 AS6461
MFNX so-1-0-0.mpr1.dca2.us.above.net. 0 miles [+0]247USUnix: 20:35:08.261
9123747474 ms [+71ms]
64.125.27.58 AS6461
MFNX so-0-1-0.mpr1.lhr2.uk.above.net. 0 miles [+0]246USUnix: 20:35:08.429
1092899089 ms [+14ms]
64.125.27.178 AS6461
MFNX so-7-0-0.mpr1.ams5.nl.above.net. 0 miles [+0]249USUnix: 20:35:08.486
11100909090 ms [+0ms]
64.125.31.190 AS6461
MFNX so-4-0-0.cr2.ams2.nl.above.net. 0 miles [+0]249USUnix: 20:35:08.549
12102929090 ms [+0ms]
82.98.242.162 AS6461
MFNX gi3-0.r1.sbp.leaseweb.net. 0 miles [+0]248DEUnix: 20:35:08.602
1391909190 ms [+0ms]
85.17.9.244 AS16265
LEASEWEB novosibirsk.v-unix.sbp.attikh.net. 0 miles [+0]56NLUnix: 20:35:09.147
14124909090 ms [+0ms]
85.17.13.20 ASN=16265[Destination Unreachable] rakebacknation.com. 0 miles [+0]56 Unix: 20:35:09.196
15***99999 ms [+99909ms]
[Unknown][Unknown - Firewall did not respond] -1 miles [+0] 0 miles [+0]
16***99999 ms [+0ms]
[Unknown][Unknown - Firewall did not respond] -1 miles [+0]
---
Pinging 85.17.13.20 [85.17.13.20]:
Ping #1: Got reply from 85.17.13.20 in 90ms [TTL=56]
Ping #2: Got reply from 85.17.13.20 in 91ms [TTL=56]
Ping #3: Got reply from 85.17.13.20 in 89ms [TTL=56]
Ping #4: Got reply from 85.17.13.20 in 90ms [TTL=56]
Variation: 2.0ms (+/- 2%)
Shortest Time: 89ms
Average: 90ms
Longest Time: 91ms
Done pinging 85.17.13.20!
---
Traceroute/ping from dnsstuff to the new server (which works)...
---
HopT1T2T3BestGraphIPHostnameDistTTLCtryTime
11000.8 ms
66.36.240.2 AS14361
HOPONE-DCA c-vl102-d1.acc.dca2.hopone.net. 255USUnix: 20:17:56.686
20020.8 ms [+0ms]
66.36.224.232 AS0
IANA-RSVD-0 gec2.core1.dca2.hopone.net. 0 miles [+0]254USUnix: 21:17:37.642
35211.6 ms [+0ms]
66.36.224.18 AS0
IANA-RSVD-0 ge3-0.core1.iad1.hopone.net. 0 miles [+0]253USUnix: 20:19:40.257
42421.6 ms [+0ms]
206.223.115.86 AS2914
NTTA-2914 ge-4-1-0.mpr1.iad10.us.mfnx.net. 0 miles [+0]251USUnix: 20:17:16.839
56121.6 ms [+0ms]
64.125.30.118 AS6461
MFNX so-4-0-0.mpr1.iad2.us.above.net. 0 miles [+0]250USUnix: 20:17:16.879
62352.1 ms [+0ms]
64.125.29.133 AS6461
MFNX so-4-0-0.mpr2.iad1.us.above.net. 0 miles [+0]249USUnix: 20:17:16.906
733822.1 ms [+0ms]
64.125.27.210 AS6461
MFNX so-1-0-0.mpr2.dca2.us.above.net. 0 miles [+0]248USUnix: 20:17:16.975
876837474 ms [+72ms]
64.125.27.166 AS6461
MFNX so-0-1-0.mpr1.lhr3.uk.above.net. 0 miles [+0]247USUnix: 20:17:17.107
9104888683 ms [+8ms]
64.125.27.221 AS6461
MFNX so-1-0-0.mpr3.ams1.nl.above.net. 0 miles [+0]250USUnix: 20:17:17.208
10108858583 ms [+0ms]
82.98.247.34 AS6461
MFNX ge1-1.sr1.esy.nl.leaseweb.net. 0 miles [+0]251DEUnix: 20:17:17.241
11108838383 ms [+0ms]
77.235.33.50 AS0
IANA-RSVD-0 gianna.v-unix.esy.attikh.net. 0 miles [+0]59GRUnix: 20:19:10.519
1293**93 ms [+9ms]
77.235.37.113 AS0
IANA-RSVD-0
[Reached Destination]77.235.37.113 [No PTR] 59GRUnix: 20:19:10.550
---
Pinging 77.235.37.113 [77.235.37.113]:
Ping #1: Got reply from 77.235.37.113 in 84ms [TTL=59]
Ping #2: Got reply from 77.235.37.113 in 84ms [TTL=59]
Ping #3: Got reply from 77.235.37.113 in 83ms [TTL=59]
Ping #4: Got reply from 77.235.37.113 in 83ms [TTL=59]
Variation: 1.2ms (+/- 1%)
Shortest Time: 83ms
Average: 83ms
Longest Time: 84ms
Done pinging 77.235.37.113!
---
I tried pinging from the new server to 68.186.73.13 since that's showing on the traceroute path, then to 71.83.224.13 (which is the IP my router reports as it's WAN address).
---
root@alpha7 [~]# ping -c 1 68.186.73.13
PING 68.186.73.13 (68.186.73.13) 56(84) bytes of data.
--- 68.186.73.13 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms
---
root@alpha7 [~]# ping -c 1 71.83.224.131
PING 71.83.224.131 (71.83.224.131) 56(84) bytes of data.
From 12.127.79.30 icmp_seq=0 Packet filtered
--- 71.83.224.131 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
, pipe 2
---
I tried pinging from the old server to 68.186.73.13 since that's showing on the traceroute path, then to 71.83.224.13 (which is the IP my router reports as it's WAN address).
---
root@old [~]# ping -c 1 68.186.73.13
PING 68.186.73.13 (68.186.73.13) 56(84) bytes of data.
64 bytes from 68.186.73.13: icmp_seq=0 ttl=245 time=170 ms
--- 68.186.73.13 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 170.487/170.487/170.487/0.000 ms, pipe 2
---
root@old [~]# ping -c 1 71.83.224.131
PING 71.83.224.131 (71.83.224.131) 56(84) bytes of data.
64 bytes from 71.83.224.131: icmp_seq=0 ttl=53 time=179 ms
--- 71.83.224.131 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 179.271/179.271/179.271/0.000 ms, pipe 2
---
View 4 Replies
View Related
Oct 27, 2009
I have a really urgent problem.
I signed up for a new WHM/CPanel reseller account, and want to transfer my sites from an existing reseller account (also WHM/CPanel) with a new (very well-known & positiviely-reviewed) provider.
(I'm moving because the new host offers services my existing host doesn't.)
Now, I have moved a reseller account from one WHM/CPanel host to another before without any issues.
But this time - moving from my current host to the new account - it doesn't work.
This is the error my *new* host got when transferring one of my clients' accounts:
*********************************************
/scripts/restorepkg /home/migrate/backup-10.27.2009_06-42-18_abiaheno.tar.gz
Using backup archive
cPanel restorepkg 2
cPanel user: abiaheno
Force Mode: no
Reseller Privs Restore: yes
Searching /home/migrate....
Found backup-10.27.2009_06-42-18_abiaheno.tar.gz !
Extracting tarball...................
Done
Extracting Domain....Done
Sorry, the copy failed. Unable to find the cpanel user file. Is the archive missing (cwd: /home/migrate/cprestore loaded backup-10.27.2009_06-42-18_abiaheno/cp/abiaheno)?
checked 6 files.....
***************************************************************
They told me to ask my current host to fix whatever's wrong. I did so, and his response was, (paraphrasing) "I'll submit a bug report to CPanel, but it will take quite a while for us to get an answer, and we backup and restore websites every day so I don't think there's a problem."
I'm very frustrated, and desperate to get this migration done. I've notified my own hosting clients that a move is imminent, and they are all holding off on updating their own sites until the migration is done. This was all supposed to be done yesterday, so I'm getting so anxious and think I'm losing credibility with my clients every moment.
my question is, does anyone have experience with this type of issue, and what can cause the error mentioned above?
View 14 Replies
View Related
