so this is the second time I got an email like this from my server:
This email was generated by the smartd daemon running on:
host name: xxxxxxxxxxxxxxxxxxxx
DNS domain: xxxxxxxxxxxxxxxxxxx
NIS domain: (none)
The following warning/error was logged by the smartd daemon:
Device: /dev/sdb, 6 Offline uncorrectable sectors
For details see host's SYSLOG (default: /var/log/messages).
You can also use the smartctl utility for further investigation.
No additional email messages about this problem will be sent.
What can I do about this?
I actually COLO a box.. I sent them the server NEW, and the drive failed a week after I sent them a new one. This SECOND drive is now having errors apparently.. what can I tell my tech to do about this? Please advise me on what I can do.. (There is a chance that this could be my primary drive)
I asked FDC to check the controller and drive, and they said there was nothing they could do.
[cPanel smartcheck] Possible Hard Drive Failure Soon
ATA Error Count: 1512 (device log contains only the most recent five errors) Error 1512 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours) Error 1511 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours) Error 1510 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours) Error 1509 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours) Error 1508 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours) ----END /dev/sda--
What do you advice me to do? ask the DC to change the Hard Drive or wait till damaged?
I'm currently hosted on a VPS server with Galaxy Solutions, but just last night I was informed of a hard drive failure.
This morning they said the DC couldn't recover the data, and now they are trying to recover the data themselves. Right now I'm assuming that if the DC can't recover it, then there isn't much of a chance of it being recovered at all.
I've put in countless hours and dedicated so much of my time to my sites, something which certainly cannot be compensated for. I would like to exhaust any possible way to recover the data.
Can anyone recommend what I should do in a situation like this? Would it be advisable to consult a data recovery specialist? It would be great if you could also recommend one.
The cost doesn't matter. I'm extremely frustrated, annoyed, and confused because of all this. Just like that, all my work is gone.
I did have backups, but they were on the same server.
S.M.A.R.T Errors on /dev/sdb From Command: /usr/sbin/smartctl -q errorsonly -H -l selftest -l error /dev/sdb Please note the following marginal Attributes: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 190 Unknown_Attribute 0x0022 054 037 045 Old_age Always In_the_past 46 ----END /dev/sdb-- i have done cpanel update in the log i have this error
Running Sanity Checks & Notifications...Using smartcheck config 5.32 for smartctl(5.33) Checking /dev/sda....Ok Checking /dev/sdb.... Errors: Please note the following marginal Attributes: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 190 Unknown_Attribute 0x0022 052 037 045 Old_age Always In_the_past 48
I received this a month ago and now ive just done a cpanel update and in the log i noticed this:
Running Sanity Checks & Notifications...Using smartcheck config 5.32 for smartctl(5.33) Checking /dev/sda....Ok Checking /dev/sdb.... Errors: ATA Error Count: 213 (device log contains only the most recent five errors) Error 213 occurred at disk power-on lifetime: 7 hours (0 days + 7 hours) Error 212 occurred at disk power-on lifetime: 7 hours (0 days + 7 hours) Error 211 occurred at disk power-on lifetime: 7 hours (0 days + 7 hours) Error 210 occurred at disk power-on lifetime: 7 hours (0 days + 7 hours) Error 209 occurred at disk power-on lifetime: 7 hours (0 days + 7 hours)
I just recently had a hard drive failure that produced the following error
root@re:/# mount /dev/hda3 /mnt mount: wrong fs type, bad option, bad superblock on /dev/hda3, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so
The host is going to mount this HD on the same machine after adding a new hard drive and fresh install... Does anyone have any recommendations for how I can go about recovering data? Specifically mysql databases?
As I have never used cPanel neither have whatsoever experience with control panels, in the process of ordering a couple of new server I am wondering what's the average recovery time after a server failure which involves data (ie. disk failure).
I am interested to understand this, because I need to choose between hardware raid or backup disk.
For example, at LiquidWeb (this is just one of the many managed providers i am evaluating) you can pay the same server 264$ with 2x250 hardware raid 1, and 219$ with 2x250 simple hard drives, where the second one is supposed to be a backup drive.
I am yet to ask, but on this servers most likely (at this prices) they do not have hot swappable disk drives where they can rebuild the array "live", so also if i choose raid hardware, in case of a disk failure, i face a downtime to bring down the server, rebuild the array, bring on the server, which I guess is something not less than 30-60 minutes downtime.
The advantage of this solution is that a disk failure keeps the system running, so you can schedule a maintenance window to replace the disk and rebuild the array, I guess.
On the other side, relying on a backup disk (and of course rsyncing data to an offsite server, i would do this anyway) you save 45$ each month, and disks after all do not fail every month.
If the main disk fails, they need to replace the disk, install again the server with what I suppose being a standard image (so let's figure a couple of hours, as they have a 30min hardware replacement sla), then you need to restore backups (which in my case are something like 20gigs). So I guess, on an average, it would take something like 4 hours downtime.
Am I correct ?
What would you reccomend as a solution with cpanel, taking into account the huge price difference ? Backup drive or Hardware raid ?
This would be for a single big website, not a hosting-company with resellers and customers environment, so I would value more the monthly saving, rather than the high availability, but of course I am interested to know what is the average time to recover a cpanel server after a drive failure.
Besides I have also another question, as I have never had a colocated server with raid hardware, so i do not know anything about this.
When a drive fails in a raid1 hardware environment, how the hosting provider gets notified ? I suppose it's not a led on the server to blink, as no one would see it.
So if you have software raid (like my computer at home) you get an email from mdadm with "warning, array degraded", so you know it quick and you can check it anytime doing a ' cat /proc/mdstat '. What about hardware raid?
My fear is that nobody notices my raid1 drive failure, the server keeps going on just a drive, then maybe the other drive fails, and it would be unpleasant: while a single drive failure would be obviously very easy to spot for me.
1- i did Os Reload with new Hard drive for "home" 2- data "backups" drive lost
3- replaced the old home drive as "/old drive"
4- " /old drive " is now the secondry drive in my server and it has the all sites usres and evry thing
5- what i need , to trasfer, copy this sites from " /old drive " to "home"
but data center said
The /olddrive/home directory contains the contents that were previously in the /home directory. You can copy files from this directory to any other directory on your server.
The command to copy files in the UNIX environment is the "cp" command.
The user directories in /olddrive/home directory contain the web page files for the users. However, simply copying the contents over will not recreate the users or domain entries in DNS/httpd. If you wish these back you will need to recreate them manually or restore them from backups.
The server is displaying these errors when I tried to do an FSCK: Bad inode IO ext3-fs error (device(8,3)) IO Failure
I am having a new primary installed and old primary set as 2nd drive. I need to recover the cpanel domain accounts from this 2nd drive after I mount it with the method below:
mkdir /backup mount /dev/sdb1 /backup
However, how do I actually recover these accounts in an automated process via whm? I've done this before with the same matter (corrupt primary drive, mount as 2nd, etc) but cannot exactly remember the proper steps.
I just purchased a brand new 10K 150GB drive. How can I take an exact copy of my current drive and transfer everything over to the new drive? I think I need to create a snapshop, or mirror it somehow.
What software will do this? I was told trueimage, but its very pricy, is there anything else?
I have a dedicated box and I started getting Input/output errors today.
I tried: # fsck fsck 1.40-WIP (14-Nov-2006) e2fsck 1.40-WIP (14-Nov-2006) /dev/hda2: recovering journal fsck.ext3: unable to set superblock flags on /dev/hda2
then I tried: # fsck -a -t ext3 /dev/hda2 fsck 1.40-WIP (14-Nov-2006) /dev/hda2: recovering journal fsck.ext3: unable to set superblock flags on /dev/hda2
My data is backed up, so was going to ask for a reimage, but is this an indication of bad hardware? Should I ask for a replacement drive? Is there anything else I should try on my own before going to the host?
I have a Win2K3 server which has 2 hard drives. I was considering backup options and I thought that I might try mirroring Drive A ==> Drive B. I would think that, then, if Drive A has a hardware failure, I could simply switch Drive B into the Primary slot (A) and the server would continue to hum along as nothing has happened. This would reduce the downtime, hopefully.
I have 3 questions.
1. Is this idea practical (will it work)? 2. What is a good software program to use fto handle the mirroring? 3. Any considerations, warnings, technical advice in regard to this method?
I was hosted with these guys for well over 2 years, and was spending on average more than $2,000.00 a month for servers.
I had slowly grown to well over 10 boxes, and was definately on my way. then one day I get a spam complaint that one of my serves was casing complaints. So I checked it out, and asked for the complaints to be relayed so I would have record of it..... nothing.... I responded and even tried to call, but at that point they had sent me a tciket stating.
We have recieved well ofer 1000 spam complaints from a server you lease with us, per out TOS we are terminating ALL OF YOUR SERVERS, and you have 15 days to remove the data!
WOW... there was no ability to have them terminate that server, they simply said NO your account will be terminated (all of your servers) and you will be banned from The Planet!
When I tried to call they said your not allowed to speak with the abuse dept, again I tried contacting my account manager, and he said he checked into it and only saw a few complaints, and didn;t understand why they were doing this... In short I barely got moved over to another provideer before they shut me down completely..... They did however offer one course of action... you could turn your dedicated server clients over to us so they dont have to move! THEY ACTUALLY SAID THIS!
I at that point made the move and then they hit my credit card for another month well short of 20 days before a bill would even be due.. I had to file charges at the local courthouse to get this reversed.
My advice, if you host at the planet dont send mail. get another server provider for mail, these guys are *&^)(* and they don;t care about shutting you down no matter what you spend with them, on top of that they will try to scarf your clients up if they can, after they leave you high and dry....
Anyone else have issues like this with anyone else. I want to compile a list of providers that do business like this so I can avoid them.
Probably nothing new. Seriously, they're horrible and everyone here probably knows it. But... I'm ticked, so I'll add something extra to show how genius they are.
The problem is I can't seem to reach my website on godaddy. It appears as if the server is down. Both via the browser and ftp it fails.
Anyway, I could write a review but no need... I'll let the e-mail I sent them and their responses do the talking.
Okay, thanks for the information... I'm still humored that needing my pin is actual security considering it's listed on your website after I login. My password is way better security because it's never visible anywhere... anyway... based on the information you gave me here's what I have found out..
The first instance of me not being able to reach the website was around noon EST yesterday. Earlier that morning I was on the website and had logged in via FTP. After noon the website was no longer reachable. This is a test from one computer.
Around 6PM on a different network, the website was reachable from 3 different computers, including the one it wasn't reachable from earlier that day. About 30 minutes later the website became unreachable again. Attempts to reach it from all 3 machines failed.
This morning, I considered your response email and assuming the webserver is up like you stated, I decided to try another network. The website was up on that network. However, it is still down on the other two networks. It seems that the website works for a limited time on each network before something happens to keep the network from reaching the webserver.
Attempts at pinging the webserver all fail.
Doing a tracert to 2leet.com times out at the following: ....
so my server dies every day and requires human intervention to fully restart all service to have my site work properly. i suspect sigterm issues as it fails to restart all service as website is still down so i always have to reboot it.
Tried recompile apache with no success [Tue Mar 18 06:51:27 2008] [error] [client 203.160.1.39] request failed: erroneous characters after protocol string: If-Modified-Since: Wed, 21 Nov 2007 06:16:52 GMT [Tue Mar 18 10:03:18 2008] [error] Bad pid (7465) in scoreboard slot 16 [Tue Mar 18 10:03:18 2008] [error] Bad pid (27848) in scoreboard slot 17 [Tue Mar 18 10:03:18 2008] [error] Bad pid (27434) in scoreboard slot 18 [Tue Mar 18 10:03:18 2008] [error] Bad pid (30782) in scoreboard slot 19 [Tue Mar 18 10:03:18 2008] [error] Bad pid (7465) in scoreboard slot 16 [Tue Mar 18 10:03:18 2008] [error] Bad pid (27848) in scoreboard slot 17 [Tue Mar 18 10:03:18 2008] [error] Bad pid (27434) in scoreboard slot 18 [Tue Mar 18 10:03:18 2008] [error] Bad pid (30782) in scoreboard slot 19 [Tue Mar 18 10:03:18 2008] [error] Bad pid (7465) in scoreboard slot 16 [Tue Mar 18 10:03:18 2008] [error] Bad pid (27848) in scoreboard slot 17 [Tue Mar 18 10:03:18 2008] [error] Bad pid (27434) in scoreboard slot 18 [Tue Mar 18 10:03:18 2008] [error] Bad pid (30782) in scoreboard slot 19 [Tue Mar 18 10:03:18 2008] [notice] caught SIGTERM, shutting down [Tue Mar 18 10:03:20 2008] [notice] mod_security/1.9.5 configured - Apache/1.3.39 (Unix) PHP/5.2.5 [Tue Mar 18 10:03:20 2008] [notice] Any You Like mod_ssl/2.8.30 OpenSSL/0.9.8g mod_perl/1.29 FrontPage/5.0.2.2510 configured -- resuming normal operations [Tue Mar 18 10:03:20 2008] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Tue Mar 18 10:03:20 2008] [notice] Accept mutex: sysvsem (Default: sysvsem)
when using outlook, things are fine but mail() in php is acting up. I ran a dns report and here is what it said. could this be the problem? what should i do?
Domain mydomain.com has 2 mail-servers.
Checking mail server (PRI=10) mail.mydomain.com [208.70.160.19]
Mail server mail.mydomain.com[208.70.160.19] answers on port 25
<<< 220 mail.hsservers.com ESMTP
>>> HELO www.checkdns.net
<<< 250 mail.hsservers.com
>>> MAIL FROM: <dnscheck@uniplace.com>
<<< 250 ok
>>> RCPT TO: <postmaster@mydomain.com>
<<< 451 temporary failure (#4.3.0)
>>> RCPT TO: <root@mydomain.com>
<<< 451 temporary failure (#4.3.0)
>>> RCPT TO: <info@mydomain.com>
<<< 451 temporary failure (#4.3.0)
>>> RCPT TO: <webmaster@mydomain.com>
<<< 451 temporary failure (#4.3.0)
Probably mail server does not accept mail for mydomain.com (received status 451)
Checking mail server (PRI=30) mail2.mydomain.com [208.70.160.20]
Mail server mail2.mydomain.com[208.70.160.20] answers on port 25
<<< 220 mail2.hsservers.com ESMTP
>>> HELO www.checkdns.net
<<< 250 mail2.hsservers.com
>>> MAIL FROM: <dnscheck@uniplace.com>
<<< 250 ok
>>> RCPT TO: <postmaster@mydomain.com>
<<< 451 temporary failure (#4.3.0)
>>> RCPT TO: <root@mydomain.com>
<<< 451 temporary failure (#4.3.0)
>>> RCPT TO: <info@mydomain.com>
<<< 451 temporary failure (#4.3.0)
>>> RCPT TO: <webmaster@mydomain.com>
<<< 451 temporary failure (#4.3.0)
Probably mail server does not accept mail for mydomain.com (received status 451)
just a 4 drive raid 5 array go down, this is hardware based, controller indicates a 2 drive failure.
It is possible to rebuild this array from the 2 good drives?
Thing is that drives come up fine in test system when testing in spinrite which show no problems, though only 2 show partition structure others just come up as empty!
I have had sporadic mysql failures. Cpanel/WHM successfully restarts it and I am notified via e-mail and text message, but I have yet to be able to determine what is causing the failure. From what I can tell nothing is logged ether by cpanal, mysql or the system about the failure.
My questions is can cpanel or mysql be configured to log what the issue is?
I have the max connections for mysql and apached limited to match the servers capacity.
I had a server built and it is now at the data center. It is working great.
I have a Raid 10 question concerning what would happen if one of my hard drives failed.
I have a 3ware 9550SX card. If one of my drives fails and I install a new one with it automatically rebuild on it own?
Someone I know mentioned to me that I need IPMI, KVM override B for it to do this and that I would also have to have software installed fore this to work.
Code: Linux nsa.nullbytehosting.com 2.6.9-55.plus.c4 #1 Sun May 20 10:11:05 EDT 2007 i686 i686 i386 GNU/Linux this is centos4.5 I believe.
and I have 5 ip addresses.
208.110.67.101 at eth0:0 208.110.67.114 at eth0:1 208.110.67.115 at eth0:2 208.110.67.116 at eth0:3 208.110.67.117 at eth0:4
my problem.
I cannot seem to get my dns working properly.
I am pointing my domain of nullbytehosting.com to ns1.nullbytehosting.com and ns2.nullbytehosting.com and of course , iuse godaddy, and ive configured that part properly.
Ive recently stopped using any control panel software, and started using ssh only.
I can access ns1 and ns2 . nullbytehosting.com just fine.
www. or just plain old nullbytehosting.com and its a no go.
options { directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; recursion no; /* * If there is a firewall between you and nameservers you want * to talk to, you might need to uncomment the query-source * directive below. Previous versions of BIND always asked * questions using port 53, but BIND 8.1 uses an unprivileged * port by default. */ query-source address * port 53; multiple-cnames yes; fetch-glue yes; };
zone "." IN { type hint; file "/var/named/named.ca"; };
zone "localdomain" IN { type master; file "/var/named/localdomain.zone"; allow-update { none; }; };
zone "localhost" IN { type master; file "/var/named/localhost.zone"; allow-update { none; }; };
zone "0.0.127.in-addr.arpa" IN { type master; file "/var/named/named.local"; allow-update { none; }; };
zone "0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa" IN { type master; file "/var/named/named.ip6.local"; allow-update { none; }; };
zone "255.in-addr.arpa" IN { type master; file "/var/named/named.broadcast"; allow-update { none; }; };
zone "0.in-addr.arpa" IN { type master; file "/var/named/named.zero"; allow-update { none; }; };
zone "nsa.nullbytehosting.com" { type master; file "/var/named/nsa.nullbytehosting.com.db"; };
zone "nullbytehosting.com" { type master; file "/var/named/nullbytehosting.com.db"; }; zone "enigmagroup.org" { type master; file "/var/named/enigmagroup.org.db"; }; zone "2020code.com" { type master; file "/var/named/2020code.com.db"; }; zone "megansblog.info" { type master; file "/var/named/megansblog.info.db"; };
logging { }; view test { }; /var/named/nsa.nullbytehosting.com.db
Code: $TTL 14400 @ 86400 IN SOA ns1.nullbytehosting.com. nullbytehosting.gmail.com. ( 2007031502 86400 7200 3600000 86400 )
ns1.nullbytehosting.com. 14400 IN A 208.110.67.101 ns2.nullbytehosting.com. 14400 IN A 208.110.67.114 mail.nullbytehosting.com. 14400 IN A 208.110.67.101 nsa.nullbytehosting.com. 14400 IN A 208.110.67.101 ftp.nullbytehosting.com. 14400 IN A 208.110.67.101 www.nullbytehosting.com. 14400 IN CNAME nullbytehosting.com. test.nullbytehosting.com. 14400 IN CNAME nullbytehosting.com. nsa.nullbytehosting.com. 14400 IN MX 0 mail.nullbytehosting.com. nsa.nullbytehosting.com. 14400 IN NS ns1.nullbytehosting.com. nsa.nullbytehosting.com. 14400 IN NS ns2.nullbytehosting.com. nsa.nullbytehosting.com. 14400 IN A 208.110.67.101 /var/named/nullbytehosting.com.db
Code:
$TTL 14400 nullbytehosting.com 14440 IN SOA ns1.nullbytehosting.com. psychomarine.gmail.com. ( 2007031601 86400 7200 3600000 86400 ) ns1 14400 IN A 208.110.67.101 ns2 14400 IN A 208.110.67.114 mail 14400 IN A 208.110.67.101 ftp 14400 IN A 208.110.67.101 www 14400 IN CNAME nullbytehosting.com. nullbytehosting.com. 14400 IN MX 0 mail.nullbytehosting.com. nullbytehosting.com. 14400 IN NS ns1.nullbytehosting.com. nullbytehosting.com. 14400 IN NS ns2.nullbytehosting.com. nullbytehosting.com. 14400 IN A 208.110.67.101 /var/named/named.local
Code: $TTL 86400 @ IN SOA localhost. root.localhost. ( 1997022700 ; Serial 28800 ; Refresh 14400 ; Retry 3600000 ; Expire 86400 ) ; Minimum IN NS localhost.
1 IN PTR localhost. /var/named/named.zero
Code: $TTL 86400 @ IN SOA localhost root ( 42 ; serial (d. adams) 3H ; refresh 15M ; retry 1W ; expiry 1D ) ; minimum IN NS localhost /var/named/localdomain.zone
Code: $TTL 86400 @ IN SOA localhost root ( 42 ; serial (d. adams) 5M ; refresh 5M ; retry 1W ; expiry 1D ) ; minimum IN NS localhost localhost IN A 127.0.0.1 /var/named/named.broadcast
Code: $TTL 86400 @ IN SOA localhost root ( 42 ; serial (d. adams) 3H ; refresh 15M ; retry 1W ; expiry 1D ) ; minimum IN NS localhost
and finally, here is a list of the files in the /var/named directory.
nsa.nullbytehosting.com.db nullbytehosting.com.db can someone please inform me of why this isnt allowing me to see nullbytehosting.com www.nullbytehosting.com or any sites I point to ns1.nullbytehosting.com or ns2.nullbytehosting.com
shows the default page I intend to see, however nullbytehosting.com www.nullbytehosting.com or anyhting like that doesnt exist.
A lookup on the dns tools website, shows alot of errors , that google isnt much help with. everyone has their own way, and none seem to put it all together and work properly.
[root@rbi0407 ~]# ping www.google.com [root@rbi0407 ~]# traceroute www.google.com www.google.com: Temporary failure in name resolution [root@rbi0407 ~]#
[root@rbi0407 ~]# traceroute 209.85.129.147 traceroute to 209.85.129.147 (209.85.129.147), 30 hops max, 40 byte packets Unable to look up 91.194.90.1: Temporary failure in name resolution 1 91.194.90.1 0.219 ms 1.270 ms 0.197 ms Unable to look up 93.104.204.33: Temporary failure in name resolution 2 93.104.204.33 0.722 ms 1.703 ms 0.666 ms Unable to look up 212.18.6.110: Temporary failure in name resolution 3 212.18.6.110 0.637 ms 0.657 ms 1.110 ms Unable to look up 194.59.190.61: Temporary failure in name resolution 4 194.59.190.61 70.601 ms 69.473 ms 62.710 ms Unable to look up 66.249.94.86: Temporary failure in name resolution Unable to look up 66.249.94.88: Temporary failure in name resolution 5 66.249.94.86 2.048 ms 1.984 ms 66.249.94.88 0.705 ms Unable to look up 209.85.248.249: Temporary failure in name resolution Unable to look up 72.14.233.107: Temporary failure in name resolution 6 209.85.248.249 9.087 ms 72.14.233.107 9.363 ms 9.954 ms Unable to look up 72.14.232.203: Temporary failure in name resolution Unable to look up 72.14.232.165: Temporary failure in name resolution 7 72.14.232.203 8.672 ms 8.370 ms 72.14.232.165 10.434 ms Unable to look up 72.14.239.170: Temporary failure in name resolution Unable to look up 72.14.233.210: Temporary failure in name resolution 8 72.14.239.170 14.446 ms 72.14.233.210 12.574 ms 9.609 ms Unable to look up 209.85.129.147: Temporary failure in name resolution 9 209.85.129.147 10.858 ms 10.048 ms 11.172 ms
[root@rbi0405 ~]# traceroute www.google.com www.google.com: Temporary failure in name resolution [root@rbi0405 ~]#
The DNS ip still can be ping if i changed the hostname into numeric ip address
root@rbi0407 ~]# ping 209.85.129.147 PING 209.85.129.147 (209.85.129.147) 56(84) bytes of data. 64 bytes from 209.85.129.147: icmp_seq=1 ttl=55 time=9.56 ms 64 bytes from 209.85.129.147: icmp_seq=2 ttl=55 time=10.7 ms 64 bytes from 209.85.129.147: icmp_seq=3 ttl=55 time=9.79 ms 64 bytes from 209.85.129.147: icmp_seq=4 ttl=55 time=8.05 ms
However one of my server and still working on nicely with no problems
[root@rbi0419 ~]# ping www.google.com PING www.l.google.com (209.85.129.103) 56(84) bytes of data. 64 bytes from fk-in-f103.1e100.net (209.85.129.103): icmp_seq=1 ttl=55 time=8.26 ms 64 bytes from fk-in-f103.1e100.net (209.85.129.103): icmp_seq=2 ttl=55 time=9.48 ms 64 bytes from fk-in-f103.1e100.net (209.85.129.103): icmp_seq=3 ttl=55 time=8.05 ms
--- www.l.google.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 8.059/8.600/9.480/0.632 ms
[root@rbi0419 ~]# traceroute www.google.com traceroute to www.google.com (209.85.129.147), 30 hops max, 40 byte packets 1 gw.giga-dns.com (91.194.90.1) 0.323 ms 0.330 ms 0.396 ms 2 host-93-104-204-33.customer.m-online.net (93.104.204.33) 0.692 ms 0.789 ms 0.887 ms 3 ge-1-3-0.rt-inxs.m-online.net (212.18.6.110) 0.756 ms 0.830 ms 0.892 ms 4 inxs.google.com (194.59.190.61) 0.734 ms 0.746 ms 0.777 ms 5 66.249.94.88 (66.249.94.88) 0.740 ms 0.769 ms 0.663 ms 6 209.85.248.249 (209.85.248.249) 8.029 ms 7.998 ms 8.144 ms 7 72.14.232.201 (72.14.232.201) 20.406 ms 20.459 ms 20.498 ms 8 72.14.239.170 (72.14.239.170) 9.985 ms 72.14.233.210 (72.14.233.210) 9.721 ms 9.712 ms 9 fk-in-f147.1e100.net (209.85.129.147) 9.556 ms 9.277 ms 8.074 ms [root@rbi0419 ~]#
Anyway ticket has been issued to them and still waiting for reply.
Just curious if anybody else face the same problems as i didn't not play around with my DNS servers at all.
