kernel: EXT3-fs error (device loop0): ext3_lookup: unlinked inode 12286 in dir #2
kernel: EXT3-fs error (device loop0): ext3_journal_start_sb: Detected aborted journal
EXT3-fs error (device loop0): ext3_lookup: unlinked inode 12286 in dir #2
some errors I get on my dedicated server? I also got errors like these when I deleted inside a folder a large number of files and after running every time 'du' it shows kernel errors.
---------
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299439] EIP is at ext3_clear_inode+0x42/0xa0 [ext3]
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299459] eax: d73d9c2c ebx: d73d9b94 ecx: 00000000 e dx: ffff9eff
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299479] esi: d73d9c2c edi: 00000000 ebp: 0000003e e sp: f7f4feb4
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299499] ds: 0068 es: 0068 fs: 00d8 gs: 0000 ss: 006 8
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299520] Process kswapd0 (pid: 162, ti=f7f4e000 task=f79ab 550 task.ti=f7f4e000)
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299540] Stack: d73d9c2c 00000000 f7f4fef0 c01ec2ff f7f4fe f0 d73d9c34 d73d9c2c c01ec65a
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299585] 00000080 de2652b8 00000080 f7f4fef0 c01ec8 a5 00000000 00000080 d73d9e18
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299628] e3c8dc34 0000e54c 00000094 f7ffea80 000000 d0 c01bedfd 0000580f 00000000
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299671] Call Trace:
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299699] [<c01ec2ff>] clear_inode+0x9f/0x150
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299726] [<c01ec65a>] dispose_list+0x1a/0xe0
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299751] [<c01ec8a5>] shrink_icache_memory+0x185/0x260
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299779] [<c01bedfd>] shrink_slab+0x11d/0x180
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299812] [<c01bf27a>] kswapd+0x35a/0x450
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299849] [<c0195d80>] autoremove_wake_function+0x0/0x50
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299880] [<c01bef20>] kswapd+0x0/0x450
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299900] [<c0195bca>] kthread+0xba/0xf0
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299921] [<c0195b10>] kthread+0x0/0xf0
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
server kernel: [358873.299945] [<c015f6e7>] kernel_thread_helper+0x7/0x10
Message from syslogd@ at Wed Jul 16 16:30:26 2008 ...
OS: Debian etch
partition type: EXT3
I was unziping from network 4gb file to my server and server crashed. When I got it back up partition has allocated 4gb of space, but there is no file I cannot reallocate it.
/dev/hda6 67G 63G 437M 100% /home
Like you can see above 4gb is allocated but it is not used, so what can i do?
im still getting the following error
Code:
root@main [/tmp/apf-9.7-1]# ./install.sh
Installing APF 9.7-1: eth0: error fetching interface information: Device not found
Completed.
Installation Details:
Install path: /etc/apf/
Config path: /etc/apf/conf.apf
Executable path: /usr/local/sbin/apf
Other Details:
eth0: error fetching interface information: Device not found
cp: cannot stat `/etc/apf.bk.last/vnet/*.rules': No such file or directory
Imported options from 9.7-1 to 9.7-1.
Note: Please review /etc/apf/conf.apf for consistency, install default backed up to /etc/apf/conf.apf.orig
my host has said
Code:
edit the apf.conf file to venet0:0 instead of eth0
which ive done and im still getting the error, Ive pasted my current conf.apf config below
Code:
#!/bin/sh
#
# APF 9.7 [apf@r-fx.org]
# Copyright (C) 1999-2007, R-fx Networks <proj@r-fx.org>
# Copyright (C) 2007, Ryan MacDonald <ryan@r-fx.org>
# This program may be freely redistributed under the terms of the GNU GPL
#
# NOTE: This file should be edited with word/line wrapping off,
# if your using pico/nano please start it with the -w switch
# (e.g: pico -w filename)
# NOTE: All options in this file are integer values unless otherwise
# indicated. This means value of 0 = disabled and 1 = enabled.
##
# [Main]
##
# !!! Do not leave set to (1) !!!
# When set to enabled; 5 minute cronjob is set to stop the firewall. Set
# this off (0) when firewall is determined to be operating as desired.
DEVEL_MODE="1"
# The installation path of APF; this can be changed but it is not recommended.
INSTALL_PATH="/etc/apf"
# Untrusted Network interface(s); all traffic on defined interface will be
# subject to all firewall rules. This should be your internet exposed
# interfaces. Only one interface is accepted for each value.
IFACE_IN="venet0"
IFACE_OUT="venet0"
# Trusted Network interface(s); all traffic on defined interface(s) will by-pass
# ALL firewall rules, format is white space or comma separated list.
IFACE_TRUSTED=""
# This option will allow for all status events to be displayed in real time on
# the console as you use the firewall. Typically, APF used to operate silent
# with all logging piped to $LOG_APF. The use of this option will not disable
# the standard log file displayed by apf --status but rather compliment it.
SET_VERBOSE="1"
# The fast load feature makes use of the iptables-save/restore facilities to do
# a snapshot save of the current firewall rules on an APF stop then when APF is
# instructed to start again it will restore the snapshot. This feature allows
# APF to load hundreds of rules back into the firewall without the need to
# regenerate every firewall entry.
# Note: a) if system uptime is below 5 minutes, the snapshot is expired
# b) if snapshot age exceeds 12 hours, the snapshot is expired
# c) if conf or a .rule has changed since last load, snapshot is expired
# d) if it is your first run of APF since install, snapshot is generated
# - an expired snapshot means APF will do a full start rule-by-rule
SET_FASTLOAD="0"
i have a problem with my server it wan't boot, i get the following error on /tmp
fsck.ext3 e2fsck_read_bitmaps illegal bitmap block
how can i fix?
i have a Centos server that install Xen and hypervm in it.
i have some vps in this server.
i restart server and after that i get this eror for run vps :
Could Not Start Vps, Reason: Error: Device 0 (vif) could not be connected. Could not find bridge, and none was specified:
how can i solved this problem ?
my server is : Centos5.2
I was just upgrading my system packages using up2date, and got this error...:
Code:
Testing package set / solving RPM inter-dependencies...
########################################
libpng-1.2.2-27.i386.rpm: ########################## Done.
libpng-devel-1.2.2-27.i386. ########################## Done.
libpng10-1.0.13-17.i386.rpm ########################## Done.
libpng10-devel-1.0.13-17.i3 ########################## Done.
rh-postgresql-7.3.19-1.i386 ########################## Done.
rh-postgresql-devel-7.3.19- ########################## Done.
rh-postgresql-libs-7.3.19-1 ########################## Done.
rh-postgresql-python-7.3.19 ########################## Done.
rh-postgresql-server-7.3.19 ########################## Done.
samba-3.0.9-1.3E.13.2.i386. There was some sort of I/O error: [Errno 28] No space left on device
But I do have space on all my partitions...
Also installing only the samba package it fails:
Code:
Testing package set / solving RPM inter-dependencies...
########################################
samba-3.0.9-1.3E.13.2.i386. There was some sort of I/O error: [Errno 28] No space left on device
im using RHEL 3 + cPanel.
i have a problem when i wget anyfile after i install
APF+BFD into my server
my server is VPS ..
my VPS details is
---------------------
Server Name: bOx
User Name: b0x
Operating System: CentOS 5
RAM: 512 MB Guaranteed 2 GB BurstedTotal
Disk Space: 10 GB
Bandwidth Quota: 500 GB
Quota Used: 0 GB
Control Panel Type: cPanel (license enabled)
Server IP Address: 72.152.456.37
---------------------
now my VPS when i restart my APF its show me this
eth0: error fetching interface information: Device not found
eth0: error fetching interface information: Device not found
and my SSH Froze in this ..
Whats is following peocess?
2011 root 0 -20 0 0 0 S 1 0.0 0:38.52 loop0
I have cpanel server
I found today that my server gets overloading - load spikes to 60 - 80
I sit down and watch top command for 1 hour. Suddanly I noticed that something is going on - loop0 process started to eat over 100% cpu
I tried to stop httpd on another console window using
service httpd stop
After 4 tries it stoped and then loop0 calm down and load lowered to normal size
(below 1)
I have kernel error on my Fedora Core 4 server:
s1 kernel: Freeing unused kernel memory: 208k freed
and my server is down 10 times a day!
Can my tech support fix that or should I reinstall server via rescue mode?
root@server [~]# yum install kernel-smp
Code:
Setting up Install Process
Setting up repositories
update 100% |=========================| 951 B 00:00
base 100% |=========================| 1.1 kB 00:00
addons 100% |=========================| 951 B 00:00
extras 100% |=========================| 1.1 kB 00:00
Reading repository metadata in from local files
primary.xml.gz 100% |=========================| 21 kB 00:00
update : ################################################## 94/94
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.main(sys.argv[1:])
File "/usr/share/yum-cli/yummain.py", line 97, in main
result, resultmsgs = do()
File "/usr/share/yum-cli/cli.py", line 470, in doCommands
return self.installPkgs()
File "/usr/share/yum-cli/cli.py", line 836, in installPkgs
self.doRepoSetup()
File "/usr/share/yum-cli/cli.py", line 75, in doRepoSetup
self.doSackSetup(thisrepo=thisrepo)
File "__init__.py", line 260, in doSackSetup
File "repos.py", line 287, in populateSack
File "sqlitecache.py", line 96, in getPrimary
File "sqlitecache.py", line 89, in _getbase
File "sqlitecache.py", line 373, in updateSqliteCache
File "/var/tmp/python-sqlite-root//usr/lib/python2.3/site-packages/sqlite/main.py", line 244, in execute
_sqlite.DatabaseError: unable to open database file
root@server [~]# rpm -q yum
yum-2.4.3-1.c4
root@server [~]# yum clean all
Cleaning up Everything
0 headers removed
0 packages removed
9 metadata files removed
0 cache files removed
1 cache files removed
root@server [~]# rpm -q sqlite
sqlite-3.3.3-1.2
My server /var/log/message last night showed this below (see the kernel message)
My SSH was idling, it shows:
root@server1 [/backup/w1/cpbackup/daily]#
Message from syslogd@ at Sun Aug 10 18:29:31 2008 ...
server1 kernel: journal commit I/O error
Message from syslogd@ at Sun Aug 10 18:35:00 2008 ...
server1 kernel: journal commit I/O error
The server was down. So I had to reboot and run e2fsck to fix it. I/O error could it mean HDD problem? (because I just change this server to new HDD 3 weeks ago)
> Aug 10 18:15:08 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT=
> MAC=ff:ff:ff:ff:ff:ff:00:1d:09:6d:cd:bb:08:00 SRC=2$
> Aug 10 18:15:11 server1 kernel: 0000:00:1c.5: eth0: Detected Tx Unit Hang:
> Aug 10 18:15:11 server1 kernel: TDH <8>
> Aug 10 18:15:11 server1 kernel: TDT <30>
> Aug 10 18:15:11 server1 kernel: next_to_use <30>
> Aug 10 18:15:11 server1 kernel: next_to_clean <4>
> Aug 10 18:15:11 server1 kernel: buffer_info[next_to_clean]:
> Aug 10 18:15:11 server1 kernel: time_stamp <32dfbee6>
> Aug 10 18:15:11 server1 kernel: next_to_watch <8>
> Aug 10 18:15:11 server1 kernel: jiffies <32dfc9d6>
> Aug 10 18:15:11 server1 kernel: next_to_watch.status <0>
> Aug 10 18:15:13 server1 kernel: 0000:00:1c.5: eth0: Detected Tx Unit Hang:
> Aug 10 18:15:13 server1 kernel: TDH <8>
> Aug 10 18:15:13 server1 kernel: TDT <30>
> Aug 10 18:15:13 server1 kernel: next_to_use <30>
> Aug 10 18:15:13 server1 kernel: next_to_clean <4>
> Aug 10 18:15:13 server1 kernel: buffer_info[next_to_clean]:
> Aug 10 18:15:13 server1 kernel: time_stamp <32dfbee6>
> Aug 10 18:15:13 server1 kernel: next_to_watch <8>
> Aug 10 18:15:13 server1 kernel: jiffies <32dfd1a5>
> Aug 10 18:15:13 server1 kernel: next_to_watch.status <0>
> Aug 10 18:15:15 server1 kernel: 0000:00:1c.5: eth0: Detected Tx Unit Hang:
> Aug 10 18:15:15 server1 kernel: TDH <8>
> Aug 10 18:15:15 server1 kernel: TDT <30>
> Aug 10 18:15:15 server1 kernel: next_to_use <30>
> Aug 10 18:15:15 server1 kernel: next_to_clean <4>
> Aug 10 18:15:15 server1 kernel: buffer_info[next_to_clean]:
> Aug 10 18:15:15 server1 kernel: time_stamp <32dfbee6>
> Aug 10 18:15:15 server1 kernel: next_to_watch <8>
> Aug 10 18:15:15 server1 kernel: jiffies <32dfd976>
> Aug 10 18:15:15 server1 kernel: next_to_watch.status <0>
> Aug 10 18:15:17 server1 kernel: 0000:00:1c.5: eth0: Detected Tx Unit Hang:
> Aug 10 18:15:17 server1 kernel: TDH <8>
> Aug 10 18:15:17 server1 kernel: TDT <30>
> Aug 10 18:15:17 server1 kernel: next_to_use <30>
> Aug 10 18:15:17 server1 kernel: next_to_clean <4>
> Aug 10 18:15:17 server1 kernel: buffer_info[next_to_clean]:
> Aug 10 18:15:17 server1 kernel: time_stamp <32dfbee6>
> Aug 10 18:15:17 server1 kernel: next_to_watch <8>
> Aug 10 18:15:17 server1 kernel: jiffies <32dfe145>
> Aug 10 18:15:17 server1 kernel: next_to_watch.status <0>
> Aug 10 18:15:19 server1 kernel: 0000:00:1c.5: eth0: Detected Tx Unit Hang:
> Aug 10 18:15:19 server1 kernel: TDH <8>
> Aug 10 18:15:19 server1 kernel: TDT <30>
> Aug 10 18:15:19 server1 kernel: next_to_use <30>
> Aug 10 18:15:19 server1 kernel: next_to_clean <4>
> Aug 10 18:15:19 server1 kernel: buffer_info[next_to_clean]:
> Aug 10 18:15:19 server1 kernel: time_stamp <32dfbee6>
> Aug 10 18:15:19 server1 kernel: next_to_watch <8>
> Aug 10 18:15:19 server1 kernel: jiffies <32dfe915>
> Aug 10 18:15:19 server1 kernel: next_to_watch.status <0>
> Aug 10 18:15:20 server1 kernel: NETDEV WATCHDOG: eth0: transmit timed out
> Aug 10 18:15:23 server1 kernel: 0000:00:1c.5: eth0: Link is Up 1000 Mbps
> Full Duplex, Flow Control: RX
> Aug 10 18:15:23 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT=
> MAC=ff:ff:ff:ff:ff:ff:00:1d:09:6d:cd:bb:08:00 SRC=2$
> Aug 10 18:15:24 server1 kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT=
> MAC=ff:ff:ff:ff:ff:ff:00:1d:09:6d:cd:bb:08:00 SRC=2$
Is there any point in having inode limitations?
View 2 Replies View RelatedI just try to restart csf in my Centos server with Direct Admin and i got this error:
Quote:
*WARNING* Since the Virtuozzo VPS iptables ip_conntrack_ftp kernel module is currently broken you have to open a PASV port hole in iptables for incoming FTP connections to work correctly. See the csf readme.txt under 'A note about FTP Connection Issues' on how to do this if you have not already done so.
I think i don't have that module at all or not?
How can i add it?
Message from syslogd@localhost at Wed Oct 31 06:00:04 2007 ...
localhost kernel: journal commit I/O error
need help on what this error means
i'm on a VPS, its this solvable by myself, or do i have to ctc the provider?
Warning: I do not want to re-open discussion on some previous threads about the legality of inode limitations. If it gets to that, please feel free to close this thread.
Reading through some other posts about inodes made me look at my own VPS setups. I use XenSource 3.1 on a CentOS 5 Dom0, using LVM for VM storage. When I create a new virtual machine (CentOS5 or Ubuntu, etc) I format the root filesystem with ext3. I use all the defaults, including number of inodes. So for a 20 gigabyte filesystem, I get:
Code:
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 20G 453M 19G 3% /
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/sda1 2621440 13861 2607579 1% /
Would there be any advantage to limiting the number of inodes a VPS has? Sure, if you had 200,000 inodes instead of 2.6 million inodes, you would have more available space. But there doesn't seem to be a hard limitation on the disk drives I'm using (WD 250GB SATA using linux software raid 1). I assume I could set any amount of inodes to a filesystem?
I trun on php5 as DSO and anything will be okay, but if I trun on php5 as fcgi, server will down and log show this section
Code:
Mar 18 21:28:58 s2 kernel: php5[22526]: segfault at 000000000000000f rip 00002b84a9b98aac rsp 00007fff015e8290 error 4
Mar 18 21:28:58 s2 kernel: php5[22528]: segfault at 000000000000000f rip 00002b9f0453aaac rsp 00007fffa6c44a70 error 4
I'm writing an inode and directory size counter, but hit a snag with directories that contain a space.
Simple code, finds all directories within a folder, sets the current directory:
for i in `find . -type d`; do ls $i; done
Looks correct? It works great, until you hit directories with spaces. So I try the following methods:
for i in `find . -type d|sed 's/ / /g'`; do ls $i; done
for i in `find . -type d|sed 's/ / /g'`; do ls "$i"; done
What is happening is, at the ( for i in ), it treats each item at the first break, if its
or a ' '. Is there a flag I can set to make it only use
? When I pipe the data, it sends each chunk of the directory through.
[root@home /home/mindbend/dev_html]# for i in `find . -type d|sed 's/ / /g'`; do ls $i; done
ls: ./test: No such file or directory
ls: ing: No such file or directory
ls: 12: No such file or directory
ls: 3: No such file or directory
ls: ./test: No such file or directory
ls: ing: No such file or directory
ls: 12: No such file or directory
ls: 3/test: No such file or directory
ls: 2: No such file or directory
# ls -d test ing 12 3/
test ing 12 3/
#ls -d test ing 12 3/test 2/
test ing 12 3/test 2/
GNU bash, version 3.2.39(1)-release (i386-portbld-freebsd7.1)
Copyright (C) 2007 Free Software Foundation, Inc.
Issue exists on linux and freebsd, same code.
I currently have hosting with Site5 (started back before all the overselling), and although my sites are very low in traffic and don't take up much space, I am running up against their 25,000 per site inode limit, due to my hosting a Gallery2 photo album on one of the sites (as I understand, the base install of Gallery2 uses 14,000 inodes alone. Due to how my album is integrated with the rest of the site, it would require hours and hours to switch to something besides Gallery2). All the sites together have used 17 GB of bandwidth so far this month, although much of that has been me uploading stuff to one of the sites to set it up.
Here are my sites:
- Site#1 is a family site, with family photos and a Wordpress blog. Very low traffic (a handful of visits a day), but lots of photos. Inodes not a problem for now (I'm at about 13,000), as unlike one of the other sites, I was able to switch to Zenphoto from Gallery2 pretty easily.
- Site#2 is the newest and fastest growing. It is a site for a small community of people who play a particular online computer game. It runs Drupal, and has about 60 members now, but 5-10 have been joining a day. Most online at one time has been 10. I get anywhere from 30-60 visits a day, but growing. The site uses about 150 MB of storage right now, and this will grow. No photo albums here.
- Site#3 (running Joomla and Gallery2) is for my own gaming group of 8 people that play the above computer game together each week online. Low traffic, but this is the site with the inode problem, as I post screenshots in Gallery2 after each session. Around 25,000 inodes, and 6.5 GB of storage used on the server.
- Site#4 is my wedding site, running on Wordpress. It only gets a handful of visits each day, and will get almost none after the wedding in mid September. No photo album here.
- Site#5 is my fiance's site (running Joomla), which she has pretty much not touched in a year and I doubt anyone visits, but I'm too much of a coward to take down.
With that in mind, I'm wondering what my best solution would be:
- Switch to a VPS, and if so, what kind and who?
- Switch to a different shared host with a higher inode limit
- Stay with Site5 and take the time to farm out the photo album somewhere off the site, or to another program like Zenphoto with a lower footprint.
I'm a tech-geek wannabe and willing to learn. I'm paying about $10 a month (I think) and could probably go as high as $30 or so.
We're considering deploying a large server that will have 8x 500GB drives in a RAID-10 config. I intend to use a 3ware 9650SE w/ BBU along with A/B power to each of the PSU's.
My question is... since this will return into a 2TB array/partition, in event of a crash (kernel panic, etc -- I expect a power outage will be very, very rare if at all) what do you guys think the fsck time would be? In my experience a RAID BBU significantly drops it, sometimes to the point of no manual fsck required, but in event of a manual fsck shouldn't the BBU be able to provide more consistent data (less errors) and therefore a much shorter fsck? Maybe just recovering the journal?
have a centos 5.1 box but not sure if i have ext2 or ext3 on the drives? basically trying to disable the file system check if there's a hard boot, which i wouldn't risk if its ext2 but will do if its ext3.
View 4 Replies View Relatedwhat are peoples opinions on running ext3 in writeback journal mode when the filesystem resides on a BBU (battery backup unit) RAID array. The BBU retains data cached on the RAID card, but all the delayed writes from writeback mode may not even have gotten to the RAID card. Am I correct on that logic?
View 5 Replies View RelatedI wanted to mount a Usb portable drive of some data I have inside my Linux server and make them read on my Windows xp.
The drive has been formatted as ext3 and it just won't show in "my computer" inside Windows unless I reformat it again as ntfs.
The same turns around if if I format as ntfs, and i can't mount it under linux with the message "mount: unknown file system type 'ntfs'"
Our server with raid 10 has had a failed hdd (which was replaced) and a
corrupt ext3 filesystem.
The server is now booted with Knoppix but drives will not mount. All we are trying to at this point is salvage as much data as we can.
we have one box in hivelocity.net that has been down so many times this month that we were forced to remove links to siteuptime where we were once so proud of having a 99.7% uptime for 3 years in theplanet.
syslog shows that just before crashing, these entries were made:
kernel: kernel BUG at mm/rmap.c:479
kernel: invalid operand:0000 [#1]
dmesg also shows this:
...
Brought up 2 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 482k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf9f20, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
...
i've googled these messages and they point to ram problems.
hivelocity.net claims to have done diagnostics on the box and that there were no problems reported.
they said this is a result of a sys configuration problem made by us.
any ideas?
running centos/virtuozzo 2.6.18-028stab062.3
when i configure vmware it asks at one point for kernel header files. where would i find them to match the current kernel?
i asked at parallels forums but help there is very scarce. i checked openVZ repositories and they dont yet have headers for this version.
what are my options? i have one last windows machine left and want to run it in VMware.
Last year I ordered a new server with Centos 4.3 and it had the kernel kernel 2.6.9-34.0.2ELsmp installed. It runned fine and I didn't update any packages since then.
Today I started getting a problem where both mysqld and kswapd0 uses very high amounts of CPU, spiking up to 100% and my memory usage is at 99% all the time. The problem seems exactly the same as the one mentioned in this thread.
In that thread the exact same kernel is said to be insecure and to cause this problem. I also came across a centOS bug that reports this problem with high cpu, mem usage and mysql & kswapd0 consuming all resources.
In the linked thread the person solved the problem by upgrading to kernel 2.6.9-42 using rpms but others recommended a newer kernel or a custom compiled kernel for CentOS.
Apparently when they used yum it said 34.0.2 was the latest kernel.
What should I do to upgrade the kernel, which version should i upgrade to, and where do I get it from? I won't be able to compile a custom kernel and I've only installed basic rpm packages before.
ip addr add 69.39.**.**/29 dev vmnet0
iam getting cant find the device vmnet0
how to add it
Has anyone here ran the CSF firewall on a bridged networking device?
View 1 Replies View RelatedI have linux server and like to put somekind of DDOS prevention/protection... what kind of device do I need to purcahse to do this?
can anyone advise on this?