I am running a Fedora Core 4 VPS with Apache 2.0.53 I think.
I would really like to install/enable WebDAV so that I can mount some of the server storage as a drive on my computer for easy file manipulation from desktop, laptop, gf's house, etc. without having to carry the files around with me all the time.
How would I go about configuring WebDAV?
I tried installing webdav on my VPS, but I'm having problems. I added the module as a DSO. I'm able to connect to it fine (in multiple client (dreamweaver, cadaver)), however, when I try to upload, I'm not able to. Apache has permissions for that directory and for the lock file. However, I get a 403 Permission Denied error.
View 1 Replies View RelatedI am having trouble setting up webdav on IIS6. I wasted all day on this today.
So far I have set it up to work over the internet with anonymous access.
Now I want to turn on:
1) basic authentication
2) SSL
I try to turn on (1) but:
- when try to access over the internet, it prompts for my login but it doesn't accept the login and keeps reprompting me.
- when I try to access from the local server, it seems to accept the login but gives an error 'the folder you entered does not appear to be valid, please choose another'
I have created a new user who has permission to access both the directory on the server and the virtual directory in IIS. I have turned on the webdav extension. I have tried reinstalling IIS too.
I'm trying to figure out if there are any security risks in enabling WebDAV on a shared server.
View 1 Replies View RelatedI am working with an Apple Lion Server. I want to give users the possibility to gain access to certain share points with the webbrowser via the WebDAV protocol. The OS allows to define sharepoints with the GUI. In this GUI you can adjust, that the users are allowed to access the sharepoints via WebDAV but it is not possible to access the folders via a browser. You just get an error from the webserver after a login:
You don't have permission to access /webdav/ on this server.
So I have looked for the relevant configuration file "httpd_webdavsharing.conf" (apache v2.2)
Code:
#
# Apache Config for WebDAV Sharing
# Activated and deactivated by com.apple.webapp.webdavsharing webapp
#
RegisterResource "WebDAV Sharing: %c %s" /webdav main webdav
RewriteEngine On
RewriteMap webdavmap prg:/usr/libexec/webdavsharing/webdavsharing_mapper
[Code] .....
Is there a way to modify the code in such a way that it allows the favoured access?
I want to grant different access rights for certain folders to a large group of users of my apache WebDav server.There are access control lists for each folder on the server. Based on the rights in the access control lists the users should only have access to the folders listed in the ACL lists.In addition to that some users have only "read", some also "write" rights for the folders.How can I set up the described access rights on my WebDav server?
View 1 Replies View RelatedWant to activate webDAV in a specific domain with a v_host conf file, but do not have a /conf directory in the domain path. How can I manage the this?
View 2 Replies View RelatedMy client wants to send SMS from his new website that we are making. How can I enable this feature ...? What's the easiest way?
(The reason I'm posting this question in this forum is that I'm just guessing that this has something to do with web hosting. But, admin, if I'm wrong about this, please move this to a different forum.)
I read that Clickatell is a good service to use to provide this service on our website. Did anyone here use this service before? If so, what did you think about it? Is it easy to set up?
dears how can i enable jsp for a specify domain?
i tried this @ putty:
/scripts/installservlet <domain.com>
but it doesnt work for me
im using cpanel 11.x
Is there any way to run SSI with html instead of shtm or shtml in Windows 2003 IIS 6 server?
View 0 Replies View RelatedI cannot enable DMA mode on /dev/hda when attemping to enable it via ssh
Code:
hdparm -d1 /dev/hda
/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)
Code:
hdparm -tT /dev/hda
/dev/hda:
Timing cached reads: 1632 MB in 2.00 seconds = 814.90 MB/sec
Timing buffered disk reads: 8 MB in 3.42 seconds = 2.34 MB/sec
I am running CentOS 4.7 and cPanel 11. cPanel also shows DMA is not enable on this drive. Kernel: 2.6.9-78.0.13.ELsmp
Code:
cat /boot/config-2.6.9-78.0.13.ELsmp |grep DMA
CONFIG_GENERIC_ISA_DMA=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_PDC_ADMA=m
Code:
hdparm -i /dev/hda
/dev/hda:
Model=WDC WD2500JB-00REA0, FwRev=20.00K20, SerialNo=WD-WMAN542173
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:
* signifies the current active mode
This wiki page has discussed how to enable iptables modules in a VPS.
View 6 Replies View RelatedBoth IE7 and FF are configured to use javascript, but no sites seem to recognize the fact and report that it's been blocked or off. How do I enabled this?
View 1 Replies View RelatedWhen I create a website in apache I have to enable php on it manually, Is there a way that I enable php by default on root of apache?
View 3 Replies View RelatedI have a dedicated server. It is a Fedora Core 6. It came with "Plesk 30 domain license". However, this license of Plesk doesn't have SpamAssassin enabled. In order to get the license with SpamAssassin, it costs an extra $30 a month.
I believe SpamAssassin by default is in fact installed on the sever, but some of my users are reporting that they are getting Spam. How can I check is SpamAssassin is running? How do I configure SpamAssassin to filter spam on all the e-mail addresses that are created in Plesk?
I have SSH access to the server.
root@contact [~]# hdparm -d 1 /dev/hdd
/dev/hdd:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)
root@contact [~]#
root@contact [~]# hdparm -X66 -d1 /dev/hdd
/dev/hdd:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
setting xfermode to 66 (UltraDMA mode2)
using_dma = 0 (off)
root@contact [~]#
drive
root@contact [~]# hdparm -I /dev/hdd
/dev/hdd:
ATA device, with non-removable media
Model Number: Hitachi HDP725050GLA360
Serial Number: GEA550RF04Z90G
Firmware Revision: GM4OA52A
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5; Revision: ATA8-AST T13 Project D1697 Revision 0b
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 65535
heads 16 1
sectors/track 63 63
--
CHS current addressable sectors: 4128705
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 976773168
device size with M = 1024*1024: 476940 MBytes
device size with M = 1000*1000: 500107 MBytes (500 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: unknown setting (0x0000)
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
Advanced Power Management feature set
Power-Up In Standby feature set
SET_FEATURES required to spinup after power up
Address Offset Reserved Area Boot
* SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
Media Card Pass-Through
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* URG for READ_STREAM[_DMA]_EXT
* URG for WRITE_STREAM[_DMA]_EXT
* WRITE_UNCORRECTABLE command
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* unknown 76[12]
Non-Zero buffer offsets in DMA Setup FIS
DMA Setup Auto-Activate optimization
Device-initiated interface power management
In-order data delivery
* Software settings preservation
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
184min for SECURITY ERASE UNIT.
Checksum: correct ....
to run one PHP script from crontab as root..
But my basic PHP has shell_exec disabled in php.ini and when trying to run script that use shell_exec even from root I get error that function is disabled.
Do you have any suggestion how can I overcome this and have ability to use this function when executing php script from console?
I noticed on my new servers users doesnt have crontab permission.On my first server they have access.So what i need to do to enable users crontab permission automaticly on new servers?I have whm/cpanel there but it seems there is nothing about it there.
View 3 Replies View RelatedI just leased a server through EV1. It's Linux (I think), Apache, and Plesk 8.0. I'm trying to get error reporting to work for my php scripts. I opened up the php.ini file (I'm about 90% sure that it's the right php.ini file) found in the /etc folder. I changed error reporting to "on" and restarted my server with Plesk.
PHP errors are still not showing up.
i just got setup with a dedicated linux server with cpanel/whm access and root and well i have a site on the server that im installing some software on and its come up saying that my server does not support these things and to change them
PHP Extension: GD
Your server does not support GD Library and cannot use (thumbnail generation, re-size/scale, etc).
PHP Function: mb_detect_encoding()
Your server does not support multibyte character encoding.
PHP Extension: openssl()
Your server does not support the openssl().
to take within my root access to turn on/ enable support for these functions and extension
I have a server running CentOS with PHP 5.2 and I'm trying to figure out how to enable PDO with the MySQL extension. I had thought PDO always came enabled with 5.2, but that apparently isn't so with this box. I am only familiar with Ubuntu/Debian, and am not sure how things are done on CentOs.
View 2 Replies View RelatedWill there be a prominent security issue if I enable wget for a user?
And where would I find the user/group file to add that user?
I have SSL certificated (GeoTrust) installed on my server for one of my site since last year, and it has been working fine.
This morning I found my site to be down, SSL connection not working.
I restarted httpd via WHM, and it failed to restart.
I removed my SSL certificate using WHM at "Manage SSL Hosts", then I can restart my httpd.
So, I think there is some conflicts between my httpd and SSL. Any idea how should I solve the problem? I have paid for the SSL cert for two years, and I want it to be back on my site.
in order to secure my server against instrusion, i disabled ssh root login and created a user for myself. however in order to access the user i need to enable SSH Password authentication
I dont enable password authentication all the time and i keep it disabled unless i need to do something via ssh.
Now my question will be, is there a way to keep the user i created and keep the root login disabled and password authentication disabled but use ssh keys for the user i created?
I was informed that if i opt to login to ssh via the user i created, the only way to do that is to enable password authentication as it cannot work with ssh keys. is this true?
I really hope someone can help me how to use the user i created together with ssh keys so i dont have to enable password authentication when loggin to ssh
I want to enable our server ssi server side includes (.shtml parsed).
My hosting company controls our server uptime, daily backup, server loads etc. when i request them; can you please enable ssi for shtml pages, i want to use ssi includes etc.. they suggested me use php instead of shtml for includes.
I want to .shtml, beacuse i use only ssi include header, footer same pages, also these pages search engine friendly.
Apache version: 2.0.52
I posted them please add following lines and restart apache afterwards:
Options +IncludesNoExec
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
They added and restarted apache, but not any affect. When i access .shtml pages via web browser, page opening successfully but not parse ssi includes, example:
<!--#include file="header.html" -->
but not parse, also i cannot use .htaccess files, our server admin say restricted them because security reasons.
I requested them our server root username and password, they say to me; before give you server root password, we remove all our server administration software from server and server administration service will be cancelled.
I wanted to activate nginx on my server als describes on [URL] ...
Installing was no problem, but when i try to enable nginx, I always get errors:
/usr/local/psa/admin/sbin/nginxmng -e
[2015-05-20 10:42:36] ERR [util_exec] proc_close() failed
Error occured while sending feedback. HTTP code returned: 502
[2015-05-20 10:42:37] ERR [util_exec] proc_close() failed
[Code] ....
We are trying to enable the dedicated IIS pool for some customers through the RPC API (Plesk 12, Win2k12R2) but couldn't find a way to. I understand we can do it through CLI with "client_pref.exe --set-iis-app-pool-settings <login_name> -iis-app-pool-turned-on true", and also through web interface, but is it possible via API? it would be really easier and cleaner.
View 3 Replies View Related
