Enabling Php By Default In Apache
Mar 17, 2008When I create a website in apache I have to enable php on it manually, Is there a way that I enable php by default on root of apache?
View 3 Replies
ADVERTISEMENT
Apache :: Every Path Is Forbidden After Enabling Wildcard Vhost
Aug 3, 2014I've been developing websites using Apache on various Ubuntu laptops over the years. I just set up a new laptop with Apache and it worked fine. If I went to localhost in my browser then it showed the default page. So far, so good.
I then added a file to sites-available to add wildcard virtual hosts. This lets me use convenient urls while developing sites on my laptop. Once I enabled this site, every url that resolved to localhost became 403 Forbidden, including urls that should return 404. Here is an example entry from other_vhosts_access.log...
Apache :: Enabling Output Buffering And Zlib / How To Check Performance
May 22, 2014Should I enable output buffering and zlib compression in PHP configuration editor to increase performance?
In global php.ini I have:
output_buffering = Off
;output_handler =
zlib.output_compression = Off
;zlib.output_handler =
Installed Apache And PHP Only Seeing Default Apache Page
Jun 1, 2007I am having an issue where I have a server that Directadmin is installed on. I go to the a url that is on the server and all i see is the default page of apache saying congrats, it is installed. Although there is no file like that in the public_html any longer and I can see my files in the public_html folder of that specific site.
View 6 Replies View RelatedPhp.ini Default For Apache 1.3.39 Php 5.2.5
Dec 29, 2007my php.ini is blank
if maybe please take one php.ini default :-)
Apache Default Message
May 11, 2009When i use the ip of my homepage and not the domain i see this:
Quote:
Apache is functioning normally
How can i change it?
And for lxadmin the same :
Quote:
This is the LxAdmin Default Page
How can i change it?
Apache Default Page
Dec 24, 2007Our servers Shared IP seems to be loading the first domain name in the httpd.conf file as the servers default page.
I want to change the default page to either our main domain or to the apaches "success!" default webpage.
We're using cpanel. I'm unsure why it's loading the first domain when you load the IP.
It used to load properly but for some odd reason stopped working. I suspect a cpanel update was the culprit.
Modifying Apache's Default Index
Jul 7, 2007I was using Apache's <Directory> directive to modify the way the default indexes look.
I recently moved from openSUSE to Windows Server 2003 and copied over the Directory code but it no longer works.
Code:
<Directory />
Options All
AllowOverride All
IndexOptions SuppressHTMLPreamble SuppressDescription FancyIndexing VersionSort FoldersFirst IgnoreCase IconsAreLinks NameWidth=60
HeaderName /!_images/html/header.shtml
ReadmeName /!_images/html/footer.shtml
AddIcon /!_images/icons/application.png .exe
AddIcon /!_images/icons/application_xp_terminal.png .sh
AddIcon /!_images/icons/book_open.png .pdf
AddIcon /!_images/icons/music.png .mp3 .ogg
AddIcon /!_images/icons/photo.png .jpg .jpeg .png .bmp .gif
AddIcon /!_images/icons/television.png .avi .wmv .xvid .divx .mpg .mpeg
AddIcon /!_images/icons/script_code_red.png .php .php4 .php5 .js
AddIcon /!_images/icons/ruby.png .ruby .rb
AddIcon /!_images/icons/folder.png ^^DIRECTORY^^
DefaultIcon /!_images/icons/page_white.png
IndexIgnore query.txt !_images !_Jason !_media2 lost+found Modules _images login torrentflux phpinfo.php Thumbs.db tmp.txt phpmyadmin sandbox test.txt test.php _index.php robots.txt System Volume Information RECYCLER
</Directory>
It doesn't load the headerfile or the readme file (they exist) and it uses the Default Icon for all files
Apache :: Which MPM Used For Request Server By Default
Feb 3, 2014I have question for apache in centos. I loaded the apache and I want to know that which MPM used by default two MPM defined in apache but which MPM apache actually used for request server.
<IfModule prefork.c>
StartServers 8
MinSpareServers 5
MaxSpareServers 20
ServerLimit 256
[Code] ....
After Reboot Plesk Show Apache 2 Default Page
Feb 18, 2015I have test server with > VMware CentOS + Plesk 12...And after reboot, plesk "localhost.localdomain" show me "Apache 2 default page"I do this > service httpd restart, and after all ok. (Show Plesk Default page) no apache page.I want normaly reboot server and show "Plesk default page" no apache...
View 4 Replies View RelatedParked Domains Show Default Apache Page Even Tho They Have DNS Entries
Jun 3, 2008I have domains parked on a subdomain. Since i updated the apache configuration with cPanel the parked domains just show the default apache configuration. The domain shows up under parked domains. I can delete the domain and readd then it works. However, that isn't a good option cause there are 100+ domains.
View 6 Replies View RelatedEnabling SMS On A Website
Jun 13, 2008My client wants to send SMS from his new website that we are making. How can I enable this feature ...? What's the easiest way?
(The reason I'm posting this question in this forum is that I'm just guessing that this has something to do with web hosting. But, admin, if I'm wrong about this, please move this to a different forum.)
I read that Clickatell is a good service to use to provide this service on our website. Did anyone here use this service before? If so, what did you think about it? Is it easy to set up?
Enabling WebDAV
Feb 10, 2007I am running a Fedora Core 4 VPS with Apache 2.0.53 I think.
I would really like to install/enable WebDAV so that I can mount some of the server storage as a drive on my computer for easy file manipulation from desktop, laptop, gf's house, etc. without having to carry the files around with me all the time.
How would I go about configuring WebDAV?
Enabling JSP For A Domain
Aug 12, 2007dears how can i enable jsp for a specify domain?
i tried this @ putty:
/scripts/installservlet <domain.com>
but it doesnt work for me
im using cpanel 11.x
Enabling Of Html To Run SSI
Dec 27, 2007Is there any way to run SSI with html instead of shtm or shtml in Windows 2003 IIS 6 server?
View 0 Replies View RelatedEnabling DMA Mode On IDE Drive
Apr 23, 2009I cannot enable DMA mode on /dev/hda when attemping to enable it via ssh
Code:
hdparm -d1 /dev/hda
/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)
Code:
hdparm -tT /dev/hda
/dev/hda:
Timing cached reads: 1632 MB in 2.00 seconds = 814.90 MB/sec
Timing buffered disk reads: 8 MB in 3.42 seconds = 2.34 MB/sec
I am running CentOS 4.7 and cPanel 11. cPanel also shows DMA is not enable on this drive. Kernel: 2.6.9-78.0.13.ELsmp
Code:
cat /boot/config-2.6.9-78.0.13.ELsmp |grep DMA
CONFIG_GENERIC_ISA_DMA=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_PDC_ADMA=m
Code:
hdparm -i /dev/hda
/dev/hda:
Model=WDC WD2500JB-00REA0, FwRev=20.00K20, SerialNo=WD-WMAN542173
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:
* signifies the current active mode
Enabling Iptables Modules
Nov 2, 2009This wiki page has discussed how to enable iptables modules in a VPS.
View 6 Replies View RelatedEnabling Javascrpt In IE On WinSrvr2008
Mar 23, 2009Both IE7 and FF are configured to use javascript, but no sites seem to recognize the fact and report that it's been blocked or off. How do I enabled this?
View 1 Replies View RelatedManually Enabling SpamAssassin
Mar 2, 2008I have a dedicated server. It is a Fedora Core 6. It came with "Plesk 30 domain license". However, this license of Plesk doesn't have SpamAssassin enabled. In order to get the license with SpamAssassin, it costs an extra $30 a month.
I believe SpamAssassin by default is in fact installed on the sever, but some of my users are reporting that they are getting Spam. How can I check is SpamAssassin is running? How do I configure SpamAssassin to filter spam on all the e-mail addresses that are created in Plesk?
I have SSH access to the server.
Enabling DMA Failed On CentOS
Aug 18, 2008root@contact [~]# hdparm -d 1 /dev/hdd
/dev/hdd:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)
root@contact [~]#
root@contact [~]# hdparm -X66 -d1 /dev/hdd
/dev/hdd:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
setting xfermode to 66 (UltraDMA mode2)
using_dma = 0 (off)
root@contact [~]#
drive
root@contact [~]# hdparm -I /dev/hdd
/dev/hdd:
ATA device, with non-removable media
Model Number: Hitachi HDP725050GLA360
Serial Number: GEA550RF04Z90G
Firmware Revision: GM4OA52A
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5; Revision: ATA8-AST T13 Project D1697 Revision 0b
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 65535
heads 16 1
sectors/track 63 63
--
CHS current addressable sectors: 4128705
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 976773168
device size with M = 1024*1024: 476940 MBytes
device size with M = 1000*1000: 500107 MBytes (500 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: unknown setting (0x0000)
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
Advanced Power Management feature set
Power-Up In Standby feature set
SET_FEATURES required to spinup after power up
Address Offset Reserved Area Boot
* SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
Media Card Pass-Through
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* URG for READ_STREAM[_DMA]_EXT
* URG for WRITE_STREAM[_DMA]_EXT
* WRITE_UNCORRECTABLE command
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* unknown 76[12]
Non-Zero buffer offsets in DMA Setup FIS
DMA Setup Auto-Activate optimization
Device-initiated interface power management
In-order data delivery
* Software settings preservation
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
184min for SECURITY ERASE UNIT.
Checksum: correct ....
Enabling Shell_exec() For Some User
Mar 26, 2008to run one PHP script from crontab as root..
But my basic PHP has shell_exec disabled in php.ini and when trying to run script that use shell_exec even from root I get error that function is disabled.
Do you have any suggestion how can I overcome this and have ability to use this function when executing php script from console?
Enabling Crontab For Users
Aug 19, 2008I noticed on my new servers users doesnt have crontab permission.On my first server they have access.So what i need to do to enable users crontab permission automaticly on new servers?I have whm/cpanel there but it seems there is nothing about it there.
View 3 Replies View RelatedEnabling PHP Error Reporting
Jan 7, 2007I just leased a server through EV1. It's Linux (I think), Apache, and Plesk 8.0. I'm trying to get error reporting to work for my php scripts. I opened up the php.ini file (I'm about 90% sure that it's the right php.ini file) found in the /etc folder. I changed error reporting to "on" and restarted my server with Plesk.
PHP errors are still not showing up.
Enabling Support Of These Php Extensions
Sep 8, 2007i just got setup with a dedicated linux server with cpanel/whm access and root and well i have a site on the server that im installing some software on and its come up saying that my server does not support these things and to change them
PHP Extension: GD
Your server does not support GD Library and cannot use (thumbnail generation, re-size/scale, etc).
PHP Function: mb_detect_encoding()
Your server does not support multibyte character encoding.
PHP Extension: openssl()
Your server does not support the openssl().
to take within my root access to turn on/ enable support for these functions and extension
Enabling PDO W/ MySQL Extension On CentOS
Jul 11, 2009I have a server running CentOS with PHP 5.2 and I'm trying to figure out how to enable PDO with the MySQL extension. I had thought PDO always came enabled with 5.2, but that apparently isn't so with this box. I am only familiar with Ubuntu/Debian, and am not sure how things are done on CentOs.
View 2 Replies View Related