For my business i just got 3 new Dell PowerEdge 1750 Rack Servers with windows 2003 installed on them. With 100Mbit speeds should i be able to host numerous game servers and voip servers?
View 3 Replies
Just picked up some used Dell PE 1750's, and was planning to add Drac's in them, but I can't seem to find which drac to use. Anyone that has any experience with this model?
Talked with a salesperson at Dell, first he didn't seem to know what Drac was, and after a while he came back to me with Drac IV which fits into PE1850. He belived it also should fit into 1750, but I don't belive that.
There is a big difference in price between these two servers. I suspect the 1950 might be overkill.
My 15 websites are presently on a dedicated Celeron win 2003 server. Would the SC1435 make much difference in speed and tasking?
I presently am using an MS SQL DB hosted on a shared server. Is there any problem in putting the SQL DB on the same server as the sites are on? Is this a good or bad idea? Should the DB go on its own separate disk if on same server?
a dell 1750 with redundant power supply that has two plugs on the back.
But...
Looking at 1U colo with only one plug available for the 1U price.
Is the only solution to use only one of the two power supplies in the Dell 1750...?
I'm thinking about purchasing a Dell PowerEdge 860 and use it as a web server. I need your guy's inputs on what you guys think of this server regarding the quality, performance, & price.
This server retails for about $420 + s/h.
Here are the specs:
PowerEdge 860 Intel® Celeron® Processor 430 at 1.8GHz, 512K Cache, 800MHz FSB
Operating System No Operating System
Memory 512MB DDR2, 667MHz, 1X512MB Single Ranked DIMMs
Riser Card Riser with 2 Slots: 1 PCI Express x8 slot and 1 PCI Express x4 slot
Primary Hard Drive 80GB 7.2K RPM Serial ATA 3Gbps 3.5-in Cabled Hard Drive
Primary Hard Drive Controller Onboard SATA Controller - No RAID
Network Adapter On-Board Dual Gigabit Network Adapter, No TOE
CD/DVD Drive No CD/DVD
Bezel Bezel
Documentation Electronic Documentation and OpenManage DVD Kit
Hard Drive Configuration Onboard SATA, 1 Drive connected to Onboard SATA Controller - No RAID
Rack Rail Options No Rails Included
Hardware Support Services 3Yr BASIC SUPPORT: 5x10 HW-Only, 5x10 NBD Onsite
Installation Support Services No Installation Assessment
Power Cords Power Cord, NEMA 5-15P to C13, 15 amp, wall plug, 10 feet / 3 meter
I know this is a newbie question but with the specs above on the server, will this server be working right out of the box (equipped with PSU & other neccessary equips.) and ready for installtion of linux servers?
i notice the Dell do not configure the on board SATA to any RAID unless you purchase add on RAID adapter.
does this mean you can't configure it yourself? do dell poweredge onboard SATA controller support any RAID at all? do dell allow you to configure it yourself or you must purchase the add on RAID adapter?
what is the difference in the PE 1950 III vs the original 1950? We're trying to get a couple in house but 1st must get a better price than $2,475 for the following specs below.
If anyone has a good sales rep at Dell (ours no longer works there), please send it via PM.
Dell PowerEdge 1950 III Specs:
2xQuad Core Xeon E5410 2.33 GHz Processors
4x1GB Ram
PERC6i RAID Controller
2x500GB 7.2k SATA 3Gbps HDs
CD-Rom/DVD
3yrs Support (5x10 HW, 5x10 NBD)
Price: $2,475.00
I have a Dell Poweredge 2650
Specs:
Dual Xeon 2.4 GHz 400 MHz FSB
ServerWorks GC-LE Chipset supports five PCI buses: three PCI-X (1 x 64bit/133MHz,
2 x 64bit/100MHz), one 64bit/66MHz, one legacy bus (32bit/33MHz)
12 GB DDR PC 2700 ECC Registered
(X5) Maxtor Atlas 15k II 3.5 series Ultra320 SCA II 80 pin in RAID 5
PERC 3/DI RAID controller with 128MB or Cache with back-up battery
(X2) integrated Broadcom Gigabit BaseT with load balancing and failover support
INTEL PRO/1000 MF GIGABIT SERVER ADAPTER C2126 FIBER
J1679 DELL INTEL PRO1000MT DUAL CARD PCI-X
Dual 500 watt power-supplies
I have a few questions.
1) How many websites could a server like this handle on a 100 Mbps synchronous line?
2) Are there any colocation companies that would hook up to the fiber card for connection?
3) What is the best choice of action when dropping line to in in a colocation center? The dual on-board or the Dual Intel Pro/1000MT? I know that there is load balancing on the on-board Broadcom NICs but how do you use them for load balancing mode?? Then are seen as two separate NICs. I can drop as many lines as needed in the data center I am planing going into so number of lines is not an issue. let me know the best action on connectivity for my server with my specs provided.
We have a rack with a bunch of Dell servers in them. The distance between the front vertical mounting brackets and the rear vertical mounting brackets is just over 28 inches (715 mm). We've always used Dell static rails they and they have always fitted perfectly.
We have recently received some new Poweredge 2970s with Rapid / Versa rails, and it seems that the front and rear mounting brackets are only 24 inches (609 mm) apart.
Am I missing something? I can't find any way of adjusting the length of the Rapid / Versa rails.
It looks like we are going to have to pull all the gear out of the rack, move the rear mounting brackets forward, and put everything back in. This is a real nuisance (and I would do pretty much anything to avoid it).
I am putting some servers into a data center in downtown la for a hosting business. I want to put a firewall between the internet and these servers so I recently purchased an older poweredge 1550 to put the ipcop distro of linux on with the intention of making it a highly customizable firewall. The only problem is that it comes with the scsi drives and it's on a raid 5 array so the stock ipcop installer will not recognize the logical drive. Would anyone happen to know if any of the drivers on the dell site will work with the ipcop distro of linux?
Assuming this doesn't end up working out, does anyone have any suggestions for a different firewall solution to use for a hosting company?
I have been looking at DELL PowerEdge R200/R210/R410. I am trying to figure out which is best bang for the buck. They all have similar pricing. Which one has best performance?
PE R200
CPU: X3360
Ram: 4 x 2GB
PE 210
CPU X3450
Ram: 4 x 2GB
PE R410
CPU: E5504 (Single CPU)
Ram: 3 x 2GB
I have a Dell 2850 with 6 HD's:
2x36 GB in a RAID 1 with LD 0 of 36GB (the HD's changed to 1x72 & 1x144 and is working fine)
3x72 GB in a RAID 5 with LD 1 of 144GB
1x72 GB as a HotSpare
The 'problem/chalange' is as follows:
The LD 0 RAID 1 is getting too small (2x36GB seen as 36) for my Windows 2008 server C drive. So I changed one 36 GB disk for a 72GB and after a couple of days the other 36 GB to a 144 GB disk (because I had those two and not 2x72 GB or 2x144 GB). Everything is working fine in this RAID 1. But now I want to enlarge/expand de Logical Drive (LD no. 0) from 36 GB to 72 GB.
I only managed to make an extra (third) Logical Drive (LD no. 2 of 36 GB).
Now I do not know how to delete this extra LD 2 on RAID 1 AND how to expand the RAID 1 LD 0 into a LD of 72 GB.
The problem is that I do not know which option to choose in the RAID controller panel (ctrl+m during the bootup progres screen).
Who knows which buttons to press or a Windows based program to configure the RAID?
Is there any way to use SATA harddrives instead of SCSI harddrives with a Dell Poweredge 2650? I purchased the Dell on the cheap. It came with one 36GB SCSI drive. Four more hotswap slots. No sleds/caddies/trays for additional drives, so I need those as well.
Looking at the market (eBay mainly) for used SCSI harddrives, it's pretty pricey to get drives of a decent size (73gb+, $50+ each). I would like to use SATA drives instead (get them brand new vs. used SCSI). Problem is this server does not have an embedded SATA controller, just the SCSI Perc3/DI controller. So maybe get a 3ware 8000 series SATA controller + sata drives + trays? Is that possible? There are no molex connectors inside the server. Power to the harddrives comes from the SCSI backplane.
The server will be just for my personal stuff (personal web site, DNS, etc), nothing mission critical. Just trying to save a few bucks buying cheap large capacity SATA drives vs. used smaller capacity SCSI drives.
Right im about to invest in some new equipment for the business and am looking at one of the 2 above servers. Does anyone have any experience with both or either?
The spec of the machine to start is as follows:
HP Proliant DL380 G5
Intel Quad-Core Xeon 2.5Ghz
4GB Ram
3x 146GB SAS Hotswap RAID5 (OS)
5x 146GB SAS Hotswap RAID5 (Storage)
Dell Poweredge 2950 III
Intel Quad-Core Xeon 2.5Ghz
4GB Ram
3x 146GB SAS RAID5 (OS)
5x 146GB SAS RAID5 (Storage)
Both are near identical specs and the price of the HP is slightly more, is it worth it?
I am calling to all the Dell 4210 Rack owners. I got one and it had some nice wire hooks in the back, but it only came with 6. 3 on each side. I tried asking Dell if they sell extras but they had no idea what I was talking about. They have to buy them from somewhere.
Here are some pictures of the hooks I am talking about. Does anyone know where I can pick up some more of them?
http://www.lanschoolyard.com/hook1.jpg
http://www.lanschoolyard.com/hook2.jpg
http://www.lanschoolyard.com/hook3.jpg
to migrate some Windows 2000 and Window 2003 server from 1 IDC to another. Wonder what is the easiest way to change all the IPs in the IIS?
View 2 Replies View RelatedI got a Dell PowerEdge 850 a couple of years ago, with a 2.8Ghz P4D processor and 2GB RAM. It's currently on CentOS 4 and running quite well with H-Sphere. I host on it a couple of sites coded in PHP, and sometimes a game server or two.
I'm currently thinking of moving on to Windows Server 2008 as I'm intending to put up a web app using ASP.Net. As you can see, my system isn't really a beefy machine, and I was wondering if I would be able to run the new OS on it and continue to be able to achieve a satisfactory performance?
I have 10 servers and it causes me $1713 monthly. I decide to get a rack and buy 10 servers from dell but the problem is: I don’t know anything about racks
View 16 Replies View Relatedat Dell's Blade Servers?
[url]
I was checking on it and it seems very attractive..
10 servers on a 7u form factor....
power supply is enclosure based instead of server based.. can be redundant or not...
what do you guys think?
I built an entry-level server to check the blade's price..
_______________________________________
Dual Core Intel® Xeon® 5050; 2X2MB Cache, 3.0GHz, 667MHZ FSB [Included in Price]
No Operating System [Included in Price]
2GB 533MHz (4X512MB), Single Ranked DIMMs [Included in Price]
SAS-SATA, No RAID, 1-2 Hard Drives attached to onboard SAS-SATA Controller [Included in Price]
40GB 5.4K RPM SATA Universal Hard Drive [Included in Price]
2nd HDD: HDD Blank, For Diskless or Single HDD Configurations [Included in Price]
NO Operating system, Microsoft Configuration [Included in Price]
3Yr BASIC SUPPORT: 5x10 HW-Only, 5x10 NBD Onsite [Included in Price]
Broadcom Dual Port TCP/IP Offload Engine Not Enabled [Included in Price]
$1,458 (enclosure not included)
_____________________________________________________
I'll build the normal rack server with the same approximate configuration and see the difference...
And btw, if you actually call them to get the server, they'll drop the price..
I've seen them giving 300+ USD of discount on a $1,200 laptop..
I was wondering if anyone has used any of the Energy Smart servers. We've just been buying the ordinary offerings from Dell that don't have Energy Smart power supplies, but we are considering purchasing them.
View 4 Replies View RelatedI recently acquired a private rack with my hosting company and I wanted to place few servers in there. The server purchased at different intervals had different specification.
While it was okay with the sales engineer as I asked them before placing the order. The support has come up now saying that that cannot put my machines there because of their different specifications.
I have seen quite a few users stack all their desktops together in the datacentre racks instead of using rack mounted servers.
Actually between rack mounted servers and desktop servers (with the same motherboard and parts) which will be better in the racks and why?
I was actually curious about this since Windows 2008 version came out.
What is the difference between Windows media services on Windows 2003 and Windows 2008?
I find myself in the following situation:
- Found great price for a full-cab in California
- They only provide power/cabinet and network drop
Now, I need Windows and Plesk licenses. I know Plesk doesn't allow resellers/external licenses. I am still waiting for a response from the message I left at their voicemail TWO WEEKS ago.
Now most importantly, is there any options I have for windows licenss? another option besides paying $800~ for them at newegg?
Any company rent Windows Server 2003 Web Edition ?
SPLA and External licenses ?
With Micfrosoft need pay 2,000$
I wait your answerds.
Will a Perc 5 raid card work in a non-dell Linux server? These cards can be found for about $100 on eBay, and are much cheaper than the Adaptec cards with similar features and ports.
View 5 Replies View RelatedPowerEdge SC1435 Dual Core AMD Opteron® 2212; 2.0GHz,2X1MB Cache,1Ghz HyperTransport 143G20 [222-6400] 1
Operating System No Operating System NOOS [420-6320] 11
2nd Processor Single Processor Only 1P [311-3928] 2
Memory FREE UPGRADE! 2GB, 667MHz, 4x512MB Single Ranked DIMMs 2G4D6P [466-7879] 3
TCP/IP Offload Engine Enablement Broadcom® Dual Port TCP/IP Offload Engine Not Enabled NTOEKEY [430-1765] 6
PCI Riser Riser with 1 PCIe Slot PCIE [320-4982] 7
1st Hard Drive 80GB 7.2K RPM Serial ATA 3Gbps 3.5-in Cabled Hard Drive 80S2 [341-3801] 8
Primary Controller Onboard SATA Controller - No RAID OBSATA [430-1949] 9
Network Adapters On-Board Dual Port Gigabit Network Adapter, No TOE OBNIC [430-2008] 13
CD/DVD Drive No CD/DVD NOCDDVD [313-3924] 16
Bezel Bezel FRTBZL [313-4477] 17
System Documentation No Hard Copy Documentation, E-Docs ONLY and OpenManage CD Kit EDOCS [310-8261] 21
HD Configuration Onboard SATA, 1 Drive connected to Onboard SATA Controller - NO RAID MST1 [341-3957] 27
Chassis Configuration No Rack Rails Included NORAIL [341-3089] 28
Hardware Support Services 1Yr BASIC SUPPORT: 5x10 HW-Only, 5x10 NBD Onsite U1OS [980-9530][985-5117][985-9057] 29
Installation Support Services No Installation Assessment NOINSTL [900-9997] 32
Power Cords Power Cord, NEMA 5-15P to C14, 15 amp, wall plug, 10 feet / 3 meter WAL10FT [310-4450] 38
why do Dell's none dell rack rail cost $249? Can i buy the rail for dell from ebay? i saw a dell rail cost only $140 on ebay.
With Windows 2003 server, there are comprehensive lists of what you need to do to secure the server before use. For Windows 2008, I wonder is there such a list? Or is it true as what I heard from Microsoft that it is already secured out of the box?
Anyone has any resources on the hardening or preparation of 2008 for server hosting uses?
I'm making a reasonably uninformed comparison here. Since Windows Vista is noted to be more resource intensive and slower than Win XP, are we right in assuming that Windows 2008 is slower than Windows 2003?
For instance, with two boxes with an identical hardware setup but the two different server OSes, will the same application like, say MySQL run slower on the Win 2008 machine?
With all the high power servers/blade servers, the 40A (@ 110V) power limit is way too small. I am wondering if there is any colo space targeted for high density application, e.g. with 10 KW/cab limit for 60A @ 208V power drops. Does anybody know of such high density colocation space? East coast is preferred.
View 14 Replies View RelatedIs there hosting that use windows xp rather than windows server 2003? What is the advantage of using windows server2003 anyway?
Most of the time I just need to run some programs that need huge bandwidth. If I want to host sites, I'll just use xamp.
I think windows xp license is cheaper.
